Canon PIXMA MX882 error message b200

I just received an error message b200 and a message saying I should disconnect the power cord and contact a service center. I did what some others did and removed the printhead and flushed it with water to clean it and put it back. Didn't make a difference. Also, when I turn on the printer, it makes a nasty scraping noise. Does anyone know how serious this problem is? Can it be fixed, or do I need to retire this one and get a new one. If I get a new one, any recommendations. I need the print, scan and fax functions and am willing to spend up to $200. We usually don't print photos from the printer. I need a working printer very badly since I use it for work.

Hello,
Please try unplugging the printer for at least 10 minutes. If the issue persists at that point, the best thing to do would be to get in touch with our technical support team at http://bit.ly/Phone_Support for further assistance. They will let you know of all the options you have.
Thanks!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Canon PIXMA MX860 error message ScanGear

When I click on my Scanner (I put MP Navigator EX in my Dock), the application opens, but then a window opens that states:
ScanGear Searching for Scanners
Do you want the application "MP Navigator EX 2.1 app" to accept incoming connections?
I have to then click "Allow"
Setting can be changed in the Firewall panel of Security & Privacy preferences.
I have gone into the Firewall panel of Security & Privacy and added the scanner and the MP Navigator EX 2.1 app to allow incoming connections; I have also updated all software I could find relative to the Canon PIXMA MX860 on the Canon website.
But every time I try to use my scanner, I have to click on the "Allow" button, as if I never changed the settings int he Firewall panel.
It's not a big deal, just a nuisance to have to keep on clicking the Allow button every time I want to use the scanner. Any thoughts?

These threads may help:
http://discussions.apple.com/thread.jspa?messageID=10105410&#10105410
http://discussions.apple.com/thread.jspa?messageID=9962758&#9962758

Error Message B200 for Canon Pixma MG5320

I have an error message B200 on my Pixma MG5320 that says "Unplug power cord and contact service center." I'm more than 100 miles from my nearest Canon service center. Any fix for this error message other than to buy a new printer? With the price of gas, driving 200 miles round trip to fix the printer really isn't feasible. Thanks!

HP doesn't have any of the quality features that CANON has,
Printing, Scanning, etc. NO ! I don't work for Canon !
I have DEEP researched Epson, and HP, and it doesn't cut
it for me.

How can I repair Canon Pixma MP550 Error B200?

How can I repair a Canon Pixma MP550 error 200?

Hi dlp1962uva,
Welcome to the Apple Support Communities!
I understand you are trying to install your Canon printer after replacing your hard drive on your MacBook Pro. It sounds like you have done some great troubleshooting by trying to install the drivers. I did some research on your printer, the Canon PIXMA iP6000D and it appears that this printer software is no longer available through software update.
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669
Additional Information
Printer software no longer available through Software Update
The third-party vendor no longer provides software for the following models to download and install through Software Update. Contact the vendor or visit their website for further assistance.
The The Additional Information section where I found this information is at the very bottom of this article. This printer specifically is listed as a printer that is no longer supported by software update is the list under Additional Information. I would suggest contacting Canon to see if the printer drivers are still available through them.
I hope this helps,
-Joe

Canon PIXMA MX860 Error 311

Hi,
I recently bought a Canon PIXMA MX860. I want to print wirelessly via bluetooth from my computer, but an error message keeps on popping up "Error Number : 311 Printer is in use or an error has occurred. If an error has occurred eliminate the cause of the error."
I updated to all the newest drivers. I tried looking at the gutenprint drivers, but I couldn't find one that works with the Canon PIXMA MX860. Any help would be much appreciated!

These threads may help:
http://discussions.apple.com/thread.jspa?messageID=10105410&#10105410
http://discussions.apple.com/thread.jspa?messageID=9962758&#9962758

Pixma MG2520 error message when trying to scan

Every time I try to scan a picture with my Pixma MG2520 it gives me the error message "You do not have the required privileges to access the specified folder. Code:9,244,3" It was working fine when I first bought it 10 days ago and I scanned about 700 pictures. Now this error code keeps coming up every time that I click on "Photo Scan". I am using Windows 8.1 on an Asus laptop. When this code came up last time I just took the printer cartridges out and put them back in and it worked fine, but this time that did not work. I do not use my printer for printing, I only use it for scanning. What can I do??

Hi xloriricex, Please try scanning and then saving your images to a different folder. Does the error persist?

Trouble importing from Canon HG21 AVCHD - error message in iMovie 08

We bought a Canon HG21 AVCHD camcorder. I am able to see the videos and play them when connected using iMovies '08. When I import them, however, I keep getting an error message (no number, just error in importing, check video). I have about 10GB of space. I thought I'd try simply importing a 25 second clip to see if that was the problem. Still, same error. I tried hooking up my external drive to import to that instead, but it will not show it as an option in the drop down menu.
I've spent all day trying to find the solution. I'd love some help if anyone can tell me what to try next.
Thanks!

You do not have enough space on the internal drive to do the import. (You need a good bit of free space just to run the operating system.)
So you need to use an external drive.
For iMovie to see an external drive, it must be formatted as MacOS Extended (journaled). You can check the formatting by right-clicking on the drive in the Finder and selecting GET INFO. If the drive is FAT32, it will not work, but it is likely that you could reformat it.
Note: Reformatting a drive will erase everything that is on it, so be sure to back up anything you need to keep.
To reformat, open DISK UTILITY. It should be in your Applications Folder under the Utilities folder.
In Disk Utility, select your external drive, and press PARTITION. Make a single partition, and choose GUID as the partition scheme. When that completes, press ERASE, and choose Mac OS Extended (journaled) as the formatting. Let it run and you are done.
iMovie should now see this drive.

I have a Canon MG6360 but error message says to cancel printing. How do I cancel print job from my iPad. Help please

I Have a Canon MG6360 air printer but unable to print last job. Error message says to cancel printing but how do I do this from my iPad? Help welcome please.

My hotmail was working properly until one month ago , then I do not what happens ... My mistake has been to cancel that account and try to re-load it... I am blocked at "unable to verify account details".
I read and follow carefully all your steps here above but it is not working!!
I also try to ask securiry code to mocrosoft and put it instead of hotmail password when creating new Ipad account but nothing.
I try to go everywhere on microsfot pages and on my mail account setting but I can not find any help from there. From PC is working
I try to choose "other" from the list of account and insert there hotmail account, both indicated adsHOTMAIL or OUTLOOK, but in this case it tells me "username or password for POP3.live.com are uncorrect.... what is POP3.live.com??
I already try everything find in the net here and elsewhere ... I have hotmail account since years can not thik to change it .... Some other help?? Some indication I have not yet try?
Why does not appear OUTLOOOK from the choice of default account in the "add account section"????!??!????

I wanted to print with my Cannon printer but it displayed an error message B200. How do I fix it?

Yesterday I wanted to print a text with my printer, but it I was getting the error code b200. What's the problem? How to fix it, any help will be appreciated!

what model?
how many times does it flash orange when you power up? or do you get a green light?
have you upluged at the wall, then left it to sit for a few hours (so with no mains cable in)?
this apparenntly resets it

Canon Pixma MP640 Error B200

Hi,
When I turn on my printer it give me B200 error. A week ago I disconnected supply cable for 12 hours and it go well.
Now I tried to disconnected already for 12 hours but this time it don't go.
I I replaced all cartridges, clean printer head with water and dry it, but it don't go.
I tried to go in service mode and green and orange led flashing alternatively. If I try to press resume 4 times in service mode to reset ink waste, nothing happens.
Advice???

*** DISCLAIMER *** You'll try the following advices solely on your own responsibility!
After B200 error in my MP640 (Europe version) I firstly carried out a print head cleaning method with alcohol and distilled water (6 + 6 min) proposed at [link removed per forum guidelines] (see down on the page and use Google translate if needed).
Well, cleaning alone didn't help.
After that I found from another forum an 'open print head bay boot' (like I'm calling it...) trick which I combined with an idea of nozzle cleaning. So I managed to solve my B200 problem as follows:
1. Turn OFF the printer and make sure there is plenty of ink left in every tank.
2. From "Devices and Printers" open MP640 properties and further the "Maintenance" window.
3. From Maintenance section select nozzle cleaning (all colors), preferably the 'deeper' one. And then STOP! Don't start any cycle yet.
4. Open the print head bay (as though you were about to change inks).
5. Turn ON power.
6. Wait for print carriage to start moving to the left and let it go past half way.
7. Before print carriage reaches left hand side (but after going halfway across) shut the cover.
8. Printer's display turns now into dark color and shows text "Canon" above the 'running balls'. During that time start the cleaning cycle but don't do anything else, i.e. don't try to print the test page yet.
9. Nozzle cleaning should start right after printer initializing.
10. After the cleaning cycle is finished run another one without printing anything. Make sure you don't run out of any ink.
11. Print the test page to check if additional cleaning is still needed.
I had to do the print bay boot + nozzle cleaning another time because B200 error returned quite soon after the first try. But after some more cleaning cycles and printing everything seems to be ok now. Hope this helps with your printer!

Log & Transfer of Canon HF 11: error message

Hi guys,
I just got a new canon HF 11 (basically the same as the HF 10) and i tried to import footage using Log & Transfer but every time I click "add clip to queue" it spins a grey icon for a few seconds which then turns to a red circle with an exclamation mark inside and says "Error: No Data". I have tried giving the clip an in and out mark but this doesn't help.
Any ideas,
Thanks

I have had a similar problem with my Canon HG21 which has both hard disk and 32GB flash drive. My method is to copy files from the Hard Disk to the flash drive and then place the flash drive into a card reader. I was able to see FCE downloading in log and transfer for a second or two and then it went into an idle mode and never downloaded the file.
My solution was to delete ALL from from the flash drive followed by copying the videos and stills from the hard disk onto the clean flash drive. I realize you don't have the luxury of the hard disk, but perhaps you can extract the files using the Voltiac tool to clone the Canon structure from the camera and see if log and transfer will work directly from your hard disk on the Mac.

Canon LiDE 120 Error message: "Cannot communicate with scanner for these reasons:"

I've tried troubleshooting multiple times: - Uninstalled and reinstalled drivers- Returned and bought same model scanner- Tried different drivers- Tried different USB ports My computer build is:Intel i7 4770k16GB 1866MHz RAM Asus Maximus Impact VInVidia GTX 780Corsair RM550Windows 8.1 64bit I don't know what I'm doing wrong. Anyone else get this? It's making me quite livid just trouble shooting it. I've read a lot of reviews on this on Amazon and other websites that says that this is plug and play for the most part. What am I doing wrong??

I have CanoScan Lide 120, which was working perfectly fine on Win7, now that I have upgraded to Win10 it does not work anymore. I get an error 2,156,167. Have tried to uninstall the driver, found new one on official website, but it didn't help.Scanner makes noise, like it's going to start scaning, but then nothing happens. When I use the preview function, it actually starts scanning, but stops somewhere in the middle (at 7%, 18%, ...) My specs:OS Name Microsoft Windows 10 Pro
Version 10.0.10240 Build 10240
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name NEW-PC
System Manufacturer ASUS
System Model All Series
System Type x64-based PC
System SKU All
Processor Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz, 3400 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 0803, 7.1.2014
SMBIOS Version 2.7
Embedded Controller Version 255.255
BIOS Mode Legacy
BaseBoard Manufacturer ASUSTeK COMPUTER INC.
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Desktop
Secure Boot State Unsupported
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale Slovenija
Hardware Abstraction Layer Version = "10.0.10240.16392"
User Name NEW-PC\Gašper
Time Zone Central Europe Daylight Time
Installed Physical Memory (RAM) 8,00 GB
Total Physical Memory 7,68 GB
Available Physical Memory 4,73 GB
Total Virtual Memory 15,4 GB
Available Virtual Memory 12,1 GB
Page File Space 7,75 GB
Page File C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware No
Hyper-V - Data Execution Protection Yes

Canon pixma mp250 error 5400(P06)

Hi everyone i have a problem. Today i bought color catridge cl-511 and black catridge pg-512, the other one smaller pg-510 cl-511 were empty. Yesterday printer worked fine but when i inserted both catrdiges today, error 5400(P06) occured. I dont know how to fix it, please help me, thanks in advance.

Can some one help me ?

Canon Pixma mx452 error code 5011

Hi,
I bought my printer a couple of months ago and it worked fine. Until a few days ago it just broke down with a code error 5011...I came home turned it on and 'beep beep beep'. I am unsure what happened. I know I was running low on ink so I bought ink and was going to change it but the error occured whenever i turned it on. Now I'm unsure if I should return the ink if the printer is really broken...
Please help...

Hello admirenkiwi.
To try and resolve this issue, please turn the printer off and back on. If the error still persists, feel free to call us at 1-800-OKCANON for additional assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Snow Leopard Upgrade Canon Pixma iP6000D Error 603 won't connect

Tried everything I know how - downloaded the proprietary and open source drivers, power cycled, restarted, etc.
Can't get my airport base station shared printer to connect. Ideas?

Before I updated the driver and firmware, I would see the printer as a Bonjour device but when I selected it, a sheet would drop down and then disappear quickly. After the updates this window then took more time to display, showing Determining Installable Options. Is this occurring for you?
I also found that when I selected the Gutenprint offering, even after the update, the print job took ages to spool.
Pahu

Canon PIXMA MX882 error message b200

Similar Messages

Maybe you are looking for