Canon Pixma MX922 black ink prints with streaks

My new MX922 is now printing with streaks. Just the black ink. The ink cartridge was replaced to be sure there was plenty of ink, but before it was even replaced the print came out streaked. In other words, parts of letters print and other parts do not; parts of sentences print and other parts do not. What do I need to do?

Hello kategreat.
Please check to make sure that the bright orange tape was removed from the top of each tank. If the tape is left on the tanks, ink may not flow properly.
If the issue persists, we would have to advise that you contact our technical support group. Please visit the following link below to contact our support group for additional assistance.
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

I want to use my canon pixma ip4500 as my printer with my good ole G4. I need a driver. Is there an easy way to get that or is my G4 too old?

I want to use my canon pixma ip4500 as my printer with my powerbook G4. I need a driver but was very confused with how to get one. Is it possible and could someone come down to my level and tell me step by step how to do it? Many thanks.

Nope, your PB is not too old.
Here is the link to the PIXMA ip4500 drivers on Canon's site:
Drivers & Software
The page has you first select your version of the Mac OS (10.4) from the pull-down "Chose Operating System" menu. Once selected, you'll see the available software, Click on the arrown next to "Drivers" and it should look like this:
(click image to enlarge if needed)
Click the word "Download " and you'll get the driver.
Note at the top of that image there are other links to other documents pertaining to this printer. If you click on "Brochures and Manuals," while you are on that web page, you'll have Canon's instructions, probably better done than by anyone here other than someone who has the same printer model on a Mac running OS 10.4.

Cannot make Canon PIXMA MX922 fax to work with "Windows Fax And Scan" on Windows 7, 8.1

I have Canon PIXMA MX922 multifunction printer installed wireless on iMac OS X Mavericks. It works great but there is no fax drivers for Mac. I have Windows 7 and Windows 8.1 installed on Parallel Desktop. I am able to print and scan on these machines. I can scan using "Windows Fax and Scan" and other programs including My Image Gardens but no luck with faxing. I can send faxes using print function and chosing a Cannon MX920 series fax driver. The problem is to recieve faxes. I've connected MX922 wireless and wired with no help.
Does anyone have the same problem? Any ideas?

Hi Anton,
thank you for your advice.
In case this is going to fix itself in 25 hours I will check for the issue then. I'm gonna let you know whether the issues has disappeared.
But it sounds to me a little bit, like you have been expecting that behaviour? Have you? Especially within a Lab it is very confusing to have test clients which appear fully functional 25 hours after the setup has been succeeded.
I've followed your annotation and posted the log files on the Connect portal.
Thx
Peter

Canon pixma mx922 compatibility issues with Mavericks?

Thinking of getting canon pixma mx922. Any body had compatibility issues with Mavericks?

Go to http://support.apple.com/kb/HT3669 for a list of printers that are still supported.
If you don't see the printer, check Printer software no longer available through Software Update.

Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
i set the printer to correct icc profile
print out comes out same with glazed colors and missing tones/colors
however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
can you please assist and thanks

I've a Pro9000 and also use Colormunki successfully.
When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.

Hi, I have updated to latest OS and now my Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.
I am running OS X 10.9.3 (13D65) on a 3.4 GHz Intel Core i5 iMac with 8 GB 1600 MHz DDR3
I've done a complete system re-install and also performed a targetted install of just the Canon Drivers - but all to no avail.
The printer is OK with regard ink-levels and is/was working fine. It will print out 'photocopies' independantly of the iMac. Additionally, from within the Print Queue I can view the ink-levels so there are comms between the iMac and the Canon - it's just that 'Print' seems to be off topic.
Can anyone help as I have to get a document out tonight
Many thanks in advance
S

Is that device desSystem Preferences - Print & Scan - Right click the printer and select Reset Printing System. DO NOT use any Canon software.
You did not advise how it is connected (USB- Wi-Fi- etc..) so it's a little difficult to assist with so little information.

Just installed the latest Canon printer software update (V 3.2) from the App store. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Printing via Airport.

Just installed the latest Canon printer software update (V 3.2) suggested by the App store in effort to get printer working after OS update. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Attempting to print via Airport from a MacBook Pro. Also from a Mac Pro via ethernet. Both worked before updating to Yosemite. Canon Pro 9000 Mk 2 works via USB. Tried installing driver 10.84 from OS 10.9 as suggested by PAHU; no luck.

The "stopped at server - no pages found" message would suggest an image with the print file that is created by the printer driver on the MacBook Pro. But if the Mac Pro is getting the same message then that is unusual.
To rule out a couple of causes I would try connecting the MacBook Pro directly to the MX850 by USB cable. This action should result in a new printer for the USB connection being created automatically. If not then you may need to manually create it as you won't be able to use the existing printer that exists for the network connection. With the new printer created see if this will let you print without error.
If this USB connected printer also fails with the same message then try a reset of the printing system. Note that this action will also remove the Pro 9000 from Printers & Scanners so you will have to add it and the MX850 again.

564 black ink - printer using photo ink for general printing!

I ran out of regular black ink for my Photosmart C6380 a couple of weeks ago. Had a full cartridge of photo black, but none was used - pages were very faint gray. After replacing the empty cartridge with a 564XL, I see that my photo black is now half empty while the regular black ink is full and has not been touched at all!! Where's the confusion? How do I make the printer draw from the standard ink cartridge instead of the photo? It won't work without every cartridge in place.

Hi Selig,
Thanks for posting you issue on forum,
From what i understand you would like to Print use black ink only instead of photo black.
You have an option under the printer driver which says Black ink only, by selecting that you will not be able to print color. On most cases this should help you use the black cartridge over the photo black.
If you have to print color you might need to change this option,
I dont have the printer over here but the steps are from best of my knowledge.
Go to Control Panel>> Devices and Printers>> Highlight Printer>>Right click on Printer and click Printing Preferences.
Click on Advance>>click on the drop down for Print in Greyscale and select Black Ink only
with newer driver we have this option under Printing Preferences>>Paper/Quality tab and under Quality settings.
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "Kudos! Star" which is on the left
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

Installed a new black ink printer cartridge in hp office jet 6500 e709n and it is not printing out

installed a new black ink printer cartridge in hp office jet 6500 e709n and it is not printing out anything with Black ink. I ran all the diagnostic tests including cleaning the cartridges, cartridge alignment, shut off the printer unplugged it, restarted, shut down computer retarted. All the other colors work except for the black cartridge. I checked the vent on cartridge and it is they way it should be. How can I print with Black Ink? very upset!!!! Have got to get something printed ASAP

I've got the same with a new black ink cartridge. The display keeps alerting that you have to renew the ink. Tha's oke but the printer does not print black/White.
Do i have to replace the collor ink also at the same time?
Does it mean that if you replace black and not the color that it's NOT possible to print b/w?

Larger black ink cartridge with pentagon 564, where to buy

Where can I buy replacement for larger 564 black ink cartridge with pentagon mark?

If you enter your printer details into the link below, you should be able to easily find what you're after:
https://h30042.www3.hp.com/SureSupply/
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Can the Canon Pixma iP 5000 be used with Mac OS X Version 10.5.8 ?

Can the Canon Pixma iP 5000 be used with Mac OS X Version 10.5.8 ? Thank you

Mail updates are usually part of OSX System Updates and no stand-alone updates.
Try downloading and installing the 10.6.8 Combo Updater from here http://support.apple.com/kb/DL1399
Stefan

How do i print from internet in black ink only with my mac osx 10.5 using hp 6510 all in one

i can not get my IMAC OS X 10.5 to print only black ink from the internet, using my new HP 6510 all in one printer. HELP
This question was solved.
View Solution.

With pleasure!
Great to know it worked for you
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Black ink 'incompatible with printer'

I brought a new laptop from PC World 4 days ago and with it came a printer (included in the laptop price).
I started to set it up today, but after I turned it on and it asked me to put in the inks, I did it in the way it showed me on the piece of paper that accompanied the printer using the inks that were provided in the box, although it showed that the black ink cartridge was incompatible with the printer. I tried taking them out and putting them back in again and the 'turn it on and off again' theory but in the end it didn't work so I'm currently only using the colored ink. Any ideas as to what I can do next?

Hi , Welcome to the HP Community!I hope you have a pleasant experience here. I'd like to help you with the incompatible black cartridge error you are getting on your HP ENVY 4507 e-All-in-One printer. If you look at the label on the cartridge itself, does it say SETUP? The printer should come with a complete setup of setup cartridges and those have to be used to initialize the printer. If it does say setup on the label, then I would recommend following the steps in this document:A 'Cartridge Missing' or 'Incompatible Ink Cartridges' Error Message Displays for HP ENVY 4500 and HP Deskjet Ink Advantage 3540 Printers If the issue persists, I'd recommend contacting our HP phone support:Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your
contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone
number Hope this helps!Thanks for posting.

Canon Pixma pro 100 Ink how to identify the black cartridges when label was accidently removed

I just started putting a new Canon Pixma Pro 100 printer together- I was not thinking and removed two of the grey (light), and grey cartridges labels. Now I do not know which to put in the slots, I cannot see any gradient by holding them up to the light, and the actual cartridge is not marked. I am soooo dumb, any suggestions.

You got a 50/50 chance. Go for it!
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Can a canon pixma MG6120 be used wirelessly with an ipad 3

Apologies if this is a naive question, but I'm totally new to the iPad / Apple environment & am having a hard time finding out a) if my new iPad 3 (Wi-Fi & 3G) will connect with My Canon Pixma MG6120 printer that is set up with my PC desktop computer; &, if it will - b) where can a decidedly non-techie AOP find simple step-by-step instructions to walk me through the procedure?

Below are some of the Apps which would support printing for non-Airprint support printers.
I have used ePrint, is quiet ok. But still using third party app is a pain
Air Sharing HD
ePrint
PrintCentral for iPad
Print Magic HD
PrinterShare Mobile

Canon Pixma MX922 black ink prints with streaks

Similar Messages

Maybe you are looking for