Canon Pixma Wireless connections "server fail"

I have a Canon Pixma 5220 printer which has worked flawlessly (wirelessly) for quite some time. A few weeks ago, we changed our router from a password protected setup to non-password protected (don't know the technical terms for this) as a couple of our smart phones would not connect with the router in order to use the wifi. (there might have been a better solution, but being non-techies, we didn't know what it was). Since doing that, I have not been able to get our Pixma printer to connect wirelessly. I deleted the printer entirely and went through the install procedure with the CD, but it will only show that a job is "pending" (which I guess means it's connecting wirelessly to some extent) and that the printer is "offline". Also, when I look at the Network Diagnostics, it shows everything working, but the server shows "fail". I'm sure there are some tweaks that I need to do, but I'm at the end of of my knowledge base. :-\ Also, in the meantime, I had my Macbook Pro repaired which means it was wiped clean, so that may have changed something as well. I'm running Mac OS X 10.6.8.

Hi robe427,
Welcome to the Support Communities! The articles below may help you troubleshoot the issue you are having with your Canon printer. These are the basic guidelines for printer setup and troubleshooting with Mac OS X. There are also links to the Canon website if needed.
OS X: Printer and scanner software available for download
http://support.apple.com/kb/HT3669
Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
OS X: Connecting a Wi-Fi printer to your Wi-Fi networkhttp://support.apple.com/kb/ht3500
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
If all else fails, reset the printing system and install the printer again:
OS X Mavericks: Reset the printing system
http://support.apple.com/kb/PH14141
I hope this information helps ....
- Judy

Similar Messages

My wireless connection keeps failing.

My wireless connection keeps failing. I turn off the wireless and it resets and works however it is temporary. Any suggestions. I bought my Airport Extreme 11/2012

Hey there Chrismcknz,
It sounds like your Wi-Fi connection from your Airport is dropping and when power cycled works for a very short period of time before stopping again. I would next try a hard reset, and test the issue. Then if needed reset it to factory default and test again. The following article explains what the resets do, and how to do them:
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Hard reset: Resets the base station back to an unconfigured state, but retains the last saved configuration and any profiles so you can restore your base station from previous settings.
Factory default reset: The same as a hard reset but also removes any saved configurations or profiles.
Thank you for using Apple Support Communities.
Regards,
Sterling

"Cant get Mail-Connection Server failed"

I just applied the new Apple ios update to my iphone 5c,and now I cant get to my emails on my yahoo account. the message says " Cant get mail - Connection Server Failed" please let me know what I need to do to fix this problem.

Yahoo's server is a known issue.
try to delete the account and read it, or use the yahoo email app.

Updated to ios 7 cannot get mail the connection server failed

I updated to ios 7 yesterday and today I keep getting "cannot get mail the connection server failed". Also the safari gets stuck or takes awhile to load the page

Was there ever a response/solution to this? There's plenty of occasions where this seems to have happened but this thread is exactly what's happening to me. I am currently in Spain and trying to use Yahoo mail.
My mail is updating occasionally but if i try to force an update i get "cannot get mail...the connection to the server failed". Also if i try to send and email i get "a copy has been placed in your outbox....the connection to the outgoing server apple.smtp.mail.yahoo.com failed...additional servers can....."
I checked my mail settings and the defined server isn't prefixed with "apple".

Canon Printers - Wireless Connection?

Many thanks for recent advice but still having probs (ie wireless connection does not work) as indeed I notice a fair few are.
The Manual refers to setting the WEP key to match the iMac's system now how can I access the iMac's WEP? Do I need to do something about the security settings?
Grateful for advice folks. Thanks.

Is that something you are being asked for in the operation panel on the printer? In my experience, when you setup Wi-Fi through the little screen on the printer, you select your Wi-Fi network and then enter the password.
In the Canon website, they have steps for the Canon Pixma MG3150, and it says to enter the Wi-Fi settings on the operational panel in step 2: http://www.canon-europe.com/Support/Consumer_Products/products/Fax__Multifunctio nals/InkJet/PIXMA_MG_series/PIXMA_MG3150.aspx?faqtcmuri=tcm:13-813328&type=faq
There is also this article that relates to your version of the OS and your printer brand:
http://support.apple.com/kb/TS3575
The steps say to temporarily connect your printer so the drivers install, and when they are installed, you can disconnect the printer. The printer will still be added in the System Preferences>Print and Fax panel when you connect it using the USB port, but you will have to remove it by highlighting it and pressing the minus sign (when it is added by connecting the USB port, it is looking for a USB connected printer. We just want to connect it to have the drivers download).
Once those are installed and your printer is connected to your Wi-Fi network (by entering the settings in the operational screen), you should be able to then add it as a network printer by clicking the plus sign at the bottom left of the System Preferences>Print and Fax window.
I hope that helps!

Connection Server Failed in SAP BI 4.0

HI
We have installed SAP BI4.0 on Linux server.
Able to login to CMC but connection server and and web intelligence servers are failed . We tried to start the server but unable to start the server .
We have restarted all the servers still connection server and and web intelligence servers are failed
Please advise
Thanks in advance

Hi
Please locate the boconfig.cfg file e.g. /home/bi4/BI4/setup/boconfig.cfg
If the file has only a few entries it is most definitely corrupted. Check if the boconfig.cfg_old has more lines, if yes make it boconfig.cfg
If that still fails:
- Restore the boconfig.cfg from a backup
- Copy the boconfig.cfg file from a working BI4 system
Then restart BI4
Regards
Roland

Mail connection server failed

I connected my Gmail account to my I Phone 4S yesterday and it worked perfectly. Today when I click on mail, i get an error "Cannot Get Mail...The Conection to the server failed". I tried deleting and re adding my mail account several times and nothing works. Does anyone know how to resolve tis error?
Thanks!

Can you access the account on another device:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
-Go to Settings>Mail>the account and turn it off and then back on
- Go to Settings>Mail the account and delete the account and reenter the settings.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

WRE54G version 3 uses all available DHCP connections causing all wireless connectivity to fail

I couldn't find this problem via search so i've started a new thread. Here is my problem.
I have configured my WRE54G and everything seems to be working great, a Wireless connection that was LOW is not Excellent.
a. I can connect to my router: 192.168.0.1 (WRT54GC firmware 1.05.7)
b. I can connect to my range expander: 192.168.0.11 (I changed the IP, firmware 3.01.01)
c. The Range Expander has the same SSID as my router and has the same WEP key too.
It seems that the range expander will eventually use all of the DHCP connections that I have configured for my router to allow.
I have the DHCP lease set to 30 minutes but when i look in the DHCP client list I see clients with 2 day leases, these are all the MAC Address of the Range Expander. Currently 5 of 7 connections are the Range Expander. Eventually it will consume all connection and I won't be able to connect.
On my wireless router I have MAC address filtering set up and only 4 MAC addresses are added to the "allow" list.
Message Edited by 221385 on 12-21-2009 07:44 PM

DHCP lease time on the router is 30 minutes.
It appears that the clients, specifically the only wireless laptop on the network, drops the connection and when it reconnects it gets a new lease and IP address. This happens many times until all IPs are in use. I don't know why the lap top drops the connection when the signal strength is excellent.
I have seen the MAC address of the Client in some cases but the majority are the WRE.
I've linked to some pictures of the router set up, the DHCP client list, and the basic WRE setup. There are only 3 wireless devices in my home, 1 laptop, 2 iPhones. I guess a neighbour could be trying to connect but I do have MAC address filtering turned on so only included MAC Addresses can connect.
I guess I could always update the firmware but I only want to do that if it will fix this issue. I tried the live chat today but I didn't have access to my home network so there wasn't much that we could do.
Basic Router Setup
DHCP Client List
WRE Setup
Message Edited by 221385 on 12-22-2009 07:16 PM
Message Edited by 221385 on 12-22-2009 07:22 PM

Hp office jet 6700 (Mac)-wireless connection keeps failing...

Hi-I am hoping that someone has a solution for this. We have an HP Officejet 6700 that has worked flawlessly till last week. The wireless signal keeps dropping. I think that is the issue because if I go into Setup on the printer itself and go to Network and start all over with finding my router, it works fine. For one print job. Then if I have something something else to print I have to go through that whole setup routine again.
If I just go to Print it says locating printer and then it says that the printer is not connected. What is going on?? Very frustrated. I tried uninstalling and reinstalling the driver (I downloaded the driver from the HP website). That didn't fix it. I saw that there was a firmware update but couldn't install it even though I plugged my laptop into the printer with a USB cord.
Something is going on that I don't have a clue in how to fix it. I really appreciate any help. Thank you, Judy

Hi mrstucci,
I would to help you establish a more consistent connection between your Officejet 6700 printer and your Mac. Please use the following document to troubleshoot the issue; Printer Does Not Maintain Wireless Connection.
If the issue persists, please also take a look at this helpful document; 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Mac OS X.
Please let me know if this resolves the issue of if you require further assistance. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Why does my wireless connection keep failing?

Each time I boot up my MBP, the wireless connection does not work. I have to go through the self diagnostics after bootup and then it works fine. Anyone know why this is happening?

figured it out...no issue after all

Wireless Media Server: "Failed To Load Component of Media Serve

When I try to install Wireless Software it always ends up in telling me "Failed to load component of Media Server" after I've restarted the system. Media Server is not running and no icon of Media Server is to be found in the system tray. ?

I am having the same problem. Did you ever get a solution?
I've tried:
uninstalling/reinstalling all the software
forcing exceptions in my firewall (Norton), showing they permit all traffic from the Media Server & Console
assigning a static IP address (my router shows the receiver as connected to the network)
But I still get the "Failed to load component of media server" message every time I log in to Windows or try to start the Media Server manually. When I try to do the receiver's Network Setup (either letting my router assign and address, or with assigning the static address), at first I get the flashing green lights, then just a solid red, with the message that my settings are incorrect. Are those two separate problems, or the same problem?
I am using a 2Wire HomePortal Gateway. The main computer I am attempting to set up through is connected by Ethernet to the gateway. I am using WEP 64-bit encryption with a single key. There are notes about "open" vs "Shared key" modes, but I don't know where to find that info in the HomePortal's settings. I have connected a laptop and a PDA wirelessly with no problems once the key is entered. I can see the receiver on the gateway's summary page of my home network.
Any help is appreciated!

IMAC won't boot with Canon PIXMA MP130 connected

with the printer connected to the machine even with the latest Canon drivers my Imac simply sits idle at the boot stage until I pull the usb connection.Then it continues to boot.If I connect the printer after boot it seem to work fine...what the heck is up ?

It should show (via the times) what service failed to start or sat for ages when the lock up occurred.
Do you hear the normal startup chime when the printer is connected? This would indicate if the POST check has passed.
If you do, then it sounds like the Open Firmware is having the trouble, as it is responsible for initializing the hardware and selecting the OS to use. However, given that you are using Boot Camp, I'm not sure if this changes things slightly.
I would be taking the iMac and the printer in to get checked. By taking the printer, you can try connecting it to another Mac and determine if it is causing the problem.

Ipad connection server failed

I am unable to use Safari . . get email. . . "unable to connect to server". Can anyone help?

Hi missmellie69,
If you are having issues accessing the Internet from your iPad (Safari, Mail, etc), you may find the following article helpful:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Regards,
- Brenden

My connection to server failed

What to do when your connection server fails?

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Canon Pixma MP970 Printer - Need Help Installing on 10.9.3!

I have a Canon Pixma MP970 printer that I cannot get to work on my MacBook Pro running OS 10.9.3! I had no issue running it on the initial release of OS 10.9, but now it is making me pull my hair out!
I recently wiped my ssd and reinstalled OS X from the recovery partition and this is when I began encountering the issue. I went to the Canon website and there are no drivers provided because it says they are already contained in OS 10.9 (and the Canon website already detects my OS). I have plugged the printer into my MacBook Pro using a USB cable and running software update (to make sure any drivers are downloaded) and there is no download. I have tried entering the printer IP address manually and still nothing.
I am out of options unless a kind soul on these forums can light the path for me. Is it possible this printer is no longer supported after an incremental OS update?
Printer: Canon Pixma MP970
Connection: Home network, wired LAN to router (printer itself already configured for network, and was working before ssd wipe)

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Canon Pixma Wireless connections "server fail"

Similar Messages

Maybe you are looking for