Canon power shot A540 digital camera

my rear viewing screen has gone blank! Everything else seems to be working properly,menu display,etc. Cant see on screen what I'm aiming camera at. Is this a improper setting or is camera broke? Any suggestions? Maybe someone could tell me where to take camera to have it checked out.

Hey jslem,
If there was a problem with the LCD screen itself you would not be able to see the menus. It could be how you have the camera set up, but without knowing what camera you have I just can't say. I would have the camera looked at by a digital imaging expert in a Best Buy® store, and if they determine that the camera needs to be repaired I would bring it to the Geek Squad® in the store and they can send it out to be serviced. If the camera is less than a year old it most likely is covered by a manufacturer's warranty, and the repair would be free unless it is determined that there is damage to the camera. If you want me to try and troubleshoot the camera just send me a private message, and I'll do my best!
Allan
Community Connector
Best Buy® Corporate
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Similar Messages

Power Shot SX260HS Digital Camera Solution Disk will not install on my computer.

Following the on screen instructions, after verifying the device, the software begins to install then a pop up screen comes on that says "a program needs my permission to continue" and after I click "continue" the software stops installing and a pop up screen comes up that says "unkown install errror" and it will not continue to install. It seems that the first pop up interferes with the installation but I do not know how to override that. Please help. Thank you

Hi espring453,
The window that pops up asking for permission is called the User Account Control. If it is interfering with the installation, it will need to be fixed or disabled. Microsoft can help you with this, but you will need to contact them directly. They also have an article on their website about turning this feature on and off. Please refer to the link below:
http://windows.microsoft.com/en-us/windows/turn-user-account-control-on-off#1TC=windows-7
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My airmac no longer finds cameras. Will find iphone, but no longer photos either. My Canon Power Shots, old and new, are as good as rocks.

Recently my MacBook Air does not list devices that are cameras. It used to, but does not now. I have recently a) used MacKeeper, b) deleted movies, photos (thousands of those spawning ones) for space, c) installed ios 7 on my iphone, d) bought a Canon Power Shot SX 170is.
Image Capture, Image Browser EX, iphoto--nothing gets photos...nothing sees photos residing on my Canon PowerShots (old and new) or my iphone. Macbook Air can not find cameras.
Help. All cameras are rocks now.

MacKeeper is considered Malwear and has destroyed many iPhoto libraries - read the user tip on it - https://discussions.apple.com/community/ilife/iphoto?view=documents - my best guess is that your problem was caused by MacKeeper - I suggest you remove it according to the instructions in that user tip
to test depress the option key and launch iphoto - create a new library and see if it works correctly with your cameras - post back with the results
LN

Need owner's manual for Canon Power Shot ELPH 115 IS camera

Need owner's manual for Canon Power Shot ELPH 115 IS camera

You can find that right here: http://www.usa.canon.com/cusa/consumer/products/cameras/digital_cameras/powershot_elph_115_is#Brochu...
On the Canon website...Canon has lots of good information there on your model !

Canon Power Shot A300 powers up, but LCD says "No Image" is camera broken ?

Canon power Shot A300 powers uo, but screen says No Image. Has new AA bateries, SD card, etc...Looks new.
Is the camera just broken ?
Thank you,
Pete Hallock
Santa Maria, California

Napapete3,
When this is displayed on the LCD, that means there are no images on the card. I noticed that you mentioned using an SD card.
Do you actually have the PowerShot A3000 or do you have the original PowerShot A300?
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Which is better. . . a Canon Sure Shot or a Canon Power Shot?

I need to purchase a camera good enough to get good close-ups for items to sell on eBay. Which is better...a Canon Sure Shot or a Canon Power Shot?

Hi, leigh8389, thanks for posting!
If you're looking for a currently-produced digital camera, we would suggest purchasing a PowerShot camera. You'll find that our PowerShots offer the very best in macro capability, color reproduction, portability, and convenience for digital editing and printing.
For your reference, our Sure Shot line of cameras operated exclusively on 35mm film rather than digital memory cards, and was produced from the mid 1990s-the mid 2000s.
Additionally, please feel free to check out our Canon Direct Sales store at shop.usa.canon.com, where you can explore Canon's latest Powershot models; we hope this helps!

HT4757 I have a canon power shot G6 that no longer works with my iMac??? Please help

Up until 2 months ago my Canon Power Shot G6 has always worked with my IMac. However, my system no longer recognizes the camera upon connecting via usb. Why?
What should I do?

Oh my God thank you so much. I spent the last week trying to figure this **** thing out and that's all it took. Sometimes the most simple explanation is all that's required but last looked at. Thank you for pointing out the obvious. I kinda wish Linksys would've pointed that out to me when I exchanged a total of 25 e-mails with them. Oh well. Thank you again. I am so grateful.

Trouble importing photos from Canon Power Shot SD1300

Until today, my family has had no difficulty importing photos into iPhoto from our Canon Power Shot SD1300 camera. But when I plugged in today to import the most recent few months of shots, the program would not accept the .jpg file format (or so the notice said). Similarly, Image Capture would not import the images.
I'm running iPhoto 8.1.2, Image Capture 6.0.1 on a MacBookPro6,2 with an Intel Core i5/2.4 GHz machine with OS X 10.6.8.
Why is this suddently not working? Did something happen with recent updates of software that screwed everything up? We've tried most of the sensible things from the camera end: deleting old photos so the memory card shouldn't be overloaded, recharging battery....
What's next?
TCC

Unfortunately, the iPhoto error message, which had something to do with "not recognizing the file type" or something (though they were listed as .jpg files) no longer shows up. Now iPhoto thinks there are no photos on the camera, though there are quite a few actually.
Image Capture recognizes that there are image files, but says, "Import Error. An error occurred while importing. 347 items were not imported." And then it begins with a list of the first files on the camera.

I have a Mac with photoshop CS6 regularly updated. I am unable to read RAW images CANON Power shot G16 /ADOBE LISTING WAS of NO HELP

Is there any one who could let me know how to read Raw images Canon power shot g16? I tried all I could and followed the suggestions given by ADOBE but noting works. I see the images with other program but I cannot work on them.

Check your version of Camera Raw installed: Help (Win)/Photoshop (Mac) > About Plug-in > Camera Raw.
If it is less than 8.2, it won't work with this camera.
If it is less than 8.6, you don't have all the updates installed.

Can I use a Canon Power Shot SX210-IS with Windows 8?

Can I use a Canon Power Shot SX210-IS with Windows 8? Is the software compatible or is there an update?
Solved!
Go to Solution.

Hello mtjs13,
You would be able to use your PowerShot SX210 IS camera with Windows 8. We have a directory of software on our web site which includes a set of updates for Windows 8. You can access them through this web link.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have a Canon Power Shot A520 and I can't get the battery cover open.

I followed the manual and am new to my camera, but I cannot get the battery cover to slide open on my Canon Power Shot A520. Any suggestions.
Solved!
Go to Solution.

Hi WG!
Thanks for posting.
There is a sliding lock switch on the battery door that needs to be slid to one side as you also push the battery door out. Please ensure you are doing both at the same time, otherwise the battery door remains locked.
This didn't answer your question? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon Power Shot A1100 IS - how do I zoom in an already taken photo, and crop it to desired image.

I would like to zoom in an already taken picture and crop to desired magnification. Can anyone tell me how to do this on the Canon Power Shot A1100 IS.
Kind Regards
Catherine

Catherine,
You can crop the image in the included Image Browser or Zoom Browser software. There isn't a method to be able to crop in camera. We regret any inconvenience that this may cause you at this time.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to upload a movie from my canon power shot to my macbook on iphoto?

Hi,
I have a canon power shot in which I have a very short movie. I want to put it on my macbook so I can upload it to you tube. I have tried to put it on iphoto but I'm still trying to learn that application so I'm not even sure I can do that. Can someone please help?

The easiest way to move it to the Mac is to use Image Capture, in your Applications Folder.
iPhoto is a database for organising your pics and photos from your camera.
Have a look here
http://www.apple.com/ilife/tutorials/#iphoto
for tutorials that will introduce iPhoto and the other iLife apps.
Regards
TD

I can't upload my pictures from my Canon Power Shot A2200

I can;t uoload my pictures from my Canon Power Shot A2200

http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Mylenium

Canon Power Shot SX50 HS.

Hello All,
I am a new member on the message boards. Owner of a Canon Power Shot SX50 HS.
I enjoy nature and take lots of bird, butterfly, deer, etc. shots. Also scenery shots.
I do not understand the setting on this camera and I only use the auto mode.
Question: What are the best settings (Apature and ISO) for the type of pictures I take.   Some come out sharp but lots have a blur.    Suggestions wlecome.......Thanks!

Hi ssobel, GloriaS and everyone,
Thanks for looking and commenting. I'm practicing daily and learning something new about the SX50 with each outing. So far, this is what's been working for me.
I believe four main factors have helped me get the type of images I'm very happy with.
1. Shooting primarily in Shutter Priority Mode or Manual Mode so I have control over shutter speed, which I set as high as possible for each scene.
2. Adjusting Exposure Compensation values for each and every shot when using Shutter Priority Mode or Aperture Priority Mode.
3. Using Center-Weighted-Average Metering.
4. Using the "Framing Assist - Lock" feature is extemely effective when using the camera at, or near, maximum zoom. It's a button located ON the camera that you press while composing the shot. The use of this feature is explained on page 57 of the manual. Along with the other strategies I use to obtain sharp hand-held images when shooting toward the long end of the zoom, this extra bit of stabilization the Framing Assist - Lock provides really helps.
I don't use a tripod when I take bird & wildlife photos. With a zoom this generous and especially on a point-and-shoot camera, it's helped me immensely to shoot in either Manual Mode or Shutter Priority Mode because I can increase the shutter speed to very high values and by doing so, greatly reduce hand-held camera shake. Along with the excellent image-stabilization performance of the camera, this combination (fast shutter speed & image-stabilization) gives my photos that extra bit of clarity people often comment on. Many of the photos on my website were taken at near or maximum zoom! Fast shutter speeds must not only be thought of for reducing subject motion blur.
Also, I'm a heavy user of the "Exposure Compensation" features this camera has to offer and this allows me to effectively control the level of lightness or darkness I want in the final image while shooting in Shutter Priority Mode and Aperture Priority Mode and is a good strategy before I'm forced to increase the ISO level thereby helping to keep noise levels to a minimum. In Shutter Priority Mode the camera automatically selects the aperture value. While Aperture Priority Mode is an excellent way to get great photos with this camera, I mostly focus on single subjects in my photography, like birds, so depth of field isn't as important to me and I'm able to control light entering the camera in other ways. I specifically set an exposure compensation value for every shot I take. Although the values might change slightly from shot to shot, and depend on the amount of bright sulight striking the subect, they're usually in the minus range of say, -1.3 to -1.0, or lower in some cases. This is critical to the style and "look" of what I want in an image. I prefer a slightly "darker tone" in my images and along with keeping the ISO values as close to ISO 80 or ISO 100 as possible, this is how I achieve images with such deep and rich color chiefly because I'm preventing the camera from producing an overexposed image. This is especially how I capture fine feather detail in white feathered birds such as egrets. Many small sensor point-and-shoot cameras tend to "overexpose" the image resulting in "blown-out highlights" producing images that often lack nice color quality and sharpness so I intentionally "underexpose" the image a bit and get exactly what I desire. The results simply look more dramatic and naturally sharper, in my opinion. In post-processing the only "correction" I ever really need to make is a one-click "Auto Contrast" in Photoshop Elements. I never have to sharpen an image. Each image on my website will display the actual settings used for that particular photo and is a good way to see the shutter speeds and the exposure compensation settings that were used, as well. Finally, I like the results I get using Center-Weighted- Average Metering.
So far, these are the core settings I've been using:
“Recording Pixel Setting" (Image Size) is set to "L" for LARGE 12M 4000x3000 & "Compression Ratio" (Image Quality) is set to "SUPERFINE JPEG." I use Continuous Auto-Focus, Auto-Focus Frame: FlexiZone, Center-Weighted-Average Metering, Spot AE is set to Center. I stay as close to ISO 80 or 100 as possible, although this camera seems to do quite well with slightly higher ISO values with regard to visible "noise." High ISO NR is set to "Standard" and I NEVER USE AUTO ISO. Image Stabilization is set to: Continuous, and I select the appropriate white-balance PRESET icon for the particular weather condition, and I never use the "AWB" preset icon. I prefer to shoot using Burst Mode. I do not use i-Contrast, Dynamic Range Correction or Shadow Correction, either.
Since I DO NOT use "Custom Colors," settings regarding Sharpness, Contrast, and Saturation remain at their Default (ZERO) points, so therefore, I have not pressed any buttons to increase these values beyond their factory defaults. I shoot all my photographs via the LCD which remains at the factory default brightness. This should cover most of the main settings I use and I'll have to dig deeper into the menus to see if there are some new settings or features in the SX50 I haven't noticed yet.
Hopefully, this introduction will prove helpful if you're interested in trying a different approach with your SX50. To be sure, there are many ways to get good results from this camera and this is simply how I prefer to do it! Can't wait to see the pictures from your trip!
Best regards,
Tony
Tony Britton Photography

Canon power shot A540 digital camera

Similar Messages

Maybe you are looking for