Canon powershot s110 power button not working

camera only turne on and off by inserting and removing the battery-power button does not work for intended use ? Canon powershot s110.

This sounds like the power button might be stuck in the on position. If the camera is new, this should be repaired under warranty. Has the camera been in any dusty environments lately? There may be some dirt by the power button that is preventing the proper operation of the power button. Has the camera been exposed to any dampness that might have shortened out the circuit board that has the power button on it? If so, that board/button combination would need to be replaced. I would have it checked out by an authorized Canon dealer to make sure of the exact problem and repair.
You could first try a reset of the camera in the menu options. You might get lucky.
Steve M.

Similar Messages

Power button not working

iPopd touch 4th generation sleep/power button not working.
Any ideas? how long is warranty?

The standard warranty is one-year. Yu can purchase, before the one-year is up and additional year. Yu can check your coverage here:
Apple - Support - Check Your Service and Support Coverage
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Power button not working with 7.1 update

Power button not working with 7.1 update

I take it your phone was still under warranty then?!
Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
I seriously think Android is calling me...

HT1688 Power button not working

Power button not working on iPhone 5

This is a defect on iPhone 5 power button that wears out in about 13-14 months of usage just after you go out of warranty. Apple is aware of this issue but chooses not to accept this as a defect. I asked the Genius bar guy and they told me this is a common case recently and costs $269 to replace your phone. There is no repair option. I am very mad and believe Apple needs to take action or will lose their customers. All iPhone 5 owners that I know started having this problem in the month of 13 -14.
I believe if the numbers go high, Apple may start a recall program. Please encourage anyone with this problem to post here. $700 phone should not wear out this soon. Apparently the part is defective on almost all iPhone 5 devices.
Other threads about this:
https://discussions.apple.com/message/23797113#23797113
https://discussions.apple.com/message/23258974#23258974

IPod touch 5th gen. Home button stuck and power button not working! Please help!

I have an iPod 5th Generation and the home button is jammed down! It felt sticky earlier but now it's stuck down. I used it when the home button wasn't working and had to use my notifications to change from app to app (as I didn't know about assistive touch). I turned it off, but now the power button is no longer responsive! The button isn't stuck, but it doesn't work anymore. It was working fine before, but now it won't respond. Please help!

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Power button not working on iPhone 4s then starts to work

Power button stopped working for a while then started working again. Has not happened before...

OK, thanks for sharing.

Power Button not working on my Zen Mi

Hi, recently bought a Zen Micro 6GB off Ebay, was brand new, not second hand, unit was fine for month or two until now, the power button isnt working at all. So the only way i can turn the unit on is to plug it into my USB port or to use my charger.
Any ideas why it might not be working?
Ive reloaded the latest firmware/bought a new battery/formatted the player (firmware upgrade wiped player) but nothing seems to fix it. Ive not dropped it at all, the problem occured when the player had just been left on a table, no-one had touched it for a day or two and it just decided it didnt wanna work anymore.
I can still use the player but i have to constantly leave it on incase im somewhere without access to a USB port or charger.
Oh yeah and because the power button doesnt work i cant get into the recovery mode (as u know you have to hold the power button on)
So....any ideas whats wrong?
And will i be able to get a replacement from creative...although i bought it off ebay? I know i wont be able to get a refund or anythin off the ebayer coz its not really their problem.
ThanksMessage Edited by matt83 on 07-07-2006 03:20 AM

OK, thanks for sharing.

Power button not working headphones not being detected

have a sony xperia z tablet, power button has stopped working and the headset is not being detected by the headphone jack,
really annoying i ahve tried resetting and that didnt fix the problem, i tried restorign but cant because the power button doesnt work to shut it down!
only a couple of months old - need sony to fix the problem, i use it for work and i need it working 100%! please respond sony - dont depend on other users to fix your issues also you have shut down most of your stores in ireland which does not help matters.

Hi johnboyire,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
With the information supplied, unfortunately if you have performed a software reset and repair on the device then this may be related to hardware, I can only suggest that you contact Sony Mobile within your region and advise them accordingly.
They will be able to help. Please use the link below to find there contact details.
http://www.sonymobile.com/global-en/support/contact-us/
I apologize for any inconvenience this may cause.
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Power button not working - officejet pro 8600 +

Hi,
I just find this problem today (after 1 year of using my officejet pro 8600+) but maybe, it's normal ....
When the control panel is opened, the light on the power button is off and the power button stops working (not possible tu turn the printer on or off) but when the control panel is closed, the power button works as expected !! is this normal ?? I just find this issue today.
Thanks for any answer,
sincerly,
Domi.

Could you provide a few more details? Do you mean the control panel on your computer? How is the printer connected - Wireless LAN, LAN or USB?
I have never noticed this with mine, but I usually leave the printer on all the time and let the power saving put it to sleep automatically when not in use.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

Hi,
Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

Read here:
https://ssl.apple.com/support/iphone5-sleepwakebutton/

Ipad 1 power button not working

I dropped some water on my ipad 1 and it was working fine, except that hte power button stopped working. I let it sit there, and dry off, but to no avail. Then I drained the battery but every 30 seconds the symbol where it shows the dead batter blinking shows up without me even pressing anything. So i think that the power button is jammed, but it looks normal.

Take it into your local Apple Retail Store and have a Genius fix it for you. I recommend scheduling an appointment to the Genius bar so you can avoid wait times. Search your local Apple Store in the search bar on the Apple website, and schedule an appointment.
HuskieN

Iphone 5 power button not working!! They have replacement program for months but why they dont email you and say it??

I have had iphone 5 and have never been happy and i think apple is not leading the technology and future of market anymore as they are lowering quality of their products(even hardware). I had to change first iphone 5 i had because of wireless issues and then i had battery problem and had to charge 3 times a day and finally after 2 years i bought they decided that its faulty and they decide to change it. Luckily enough i read it on an online tech magazine and after googling i see that they have had replacement for power button as well which i am eligible for as well!! i go to genius bar and they replace battery but they dont replace power button cause they examine it and passes till the audio dock test! It connects to charder dock or cable but it doest to audio test dock and he says one off the pins inside is not right but it charges perfectly with every cable in the store!! And i tell him that they have to change power button not the charging pin cause it doesnt make sense!! Its a faulty product and maybe if they emailed and said it nearly a year ago my pin was right then!! so i think they found a silly reason not to change it and so i am struggling with that phone and brand that i hate(once i used to love)!

ahmetfromlondon63 wrote
And I don't know what these guys are talking about? I have an unsolved hardware issue and I posted here!
This is a user-to-user technical support forum. This is not AppleCare. You are not addressing Apple here. No one here can help you resolve your customer service issue with Apple. Use the Contact Us link at the bottom right of every page for information on how to contact Apple directly. When you talk to them, I'd suggest not using profanity. It makes people less likely to help you.

S110 menu button not working

Hi,
We're on our honeymoon and been taking good pictures without any problems with Canon S110 until yesterday. The camera suddenly has the following problems:
1. turn on normally but then immediately taking one photo no matter what mode it's on.
2. once the single photo was taken, the camera completely freeze except the display button working and the delete button (working but not be able to select delete)
3. shutter button and zoom in or out is completely useless
3. MENU button is NOT working at all
We have been trying the following:
- new fully charged batterry
- new SD card
- turn off and remove both battery and SD card overnight
It's very frustrated and we only have this camera on this trip. Please help!!!

Just registered to report my solution.
I have a similar problem with the PowerShot S110 of my wife's sister.
At some time a menu button and all joystick buttons stop working.
The problem was because of sticking zoom control (yeah it's very stupid).
At the normal state zoom control must return to central position!
When zoom control is on the left or right position - some buttons don't work.
I hope this info will be usefull to someone.

Power button not working like it should...

When booting up, I have to press power button several times. Finally, when it does come on (Pavilion dv6Notebook), the fan runs quite a bit. I am worried my hard drive is about to go. Any tips?

Try a soft reset and see what happens.
If the power button is not working, here is a link for a program that remaps the power button on your TX so you can hard reset and power off.
There is a program called PowerBtn 2.0. This allows you to turn off the device when the power button does not work. (Thanks to Computerwiz for the info.)
Click on the following link for the website.
http://www.canuck-software.ca/
For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Iv'e upgraded my iMac to 10.6.8 and now microsoft office 2004 and my canon powershot camera software will not work. any suggestions?

I just upgraded my iMac to 10.6.8. Now my Microsoft office applications,(word, excel, ppt) and my camera software to transfer picts from my camera will not launch. (Separate apps but all stopped working as soon as I upgraded from 10.5.8). The software for the Canon Powershot is Ver.37.2. Image browser 6.2 EOS utility 1.1. Any help would be appreciated.
Also if you could tell me what happens to the individual jpegs that get imported through iPhoto, I would go back to using that instead of the Canon software. I want to be able to go into a folder and see all the jpegs and not have to rely on iPhoto's one enormous file. What happens if that iPhoto file gets corrupt? Thanks, Leesha

Leesha wrote:
I just upgraded my iMac to 10.6.8. Now my Microsoft office applications,(word, excel, ppt) and my camera software to transfer picts from my camera will not launch. (Separate apps but all stopped working as soon as I upgraded from 10.5.8).
Actually, Microsoft Office 2004 works fine with Snow Lepoard OS 10.6.x. However, it does require Rosetta, Apple's app for Classic apps. In your upgrade from Lepoard 10.5.8, Rosetta may not have installed but you can manually install it with the instructions here.
On another note, when upgrading the OS, some anomalies get resolved by repairing disk permissions with Disk Utility in the Utilities folder.
One more note, there was an issue with Rosetta crashing with OS 10.6.8 in February 2012. Apple released a security update that fixed it. You can see if Software Update (launch from the Apple menu) shows it or manually download Security Update 2012-001 v1.1 and install it. Software Update will also show other applicable apps available for updating for your upgraded system.
Rosetta is no longer available with OS 10.7 Lion and beyond. Then you will need to upgrade MS Office 2011 for Mac.
HTH

Canon powershot s110 power button not working

Similar Messages

Maybe you are looking for