Canon Powershot sx60HS picture distorted, Why ?

Picture taken with my Canon Powershot SX60HS is always distorted looks very flat at very right and left corner. See my group photo sample, taken in P-MODE at very left. No effect applied just simple click to shoot. But all my pictures are now just a waste. I do not understand why lens taking photos in this shape can any of expert advice me.....
My camera detailsCanon PowerShot SX60HSCMIT ID: 2014DJ2229No. 921051000337Pls. note camera taken only 4 month back from JAPAN. I have reseted all settings to default and clicked again same picture distorted. Pls help

Metal dont lose faith or get discouraged ! You have the best and most powerful, in many ways,of the bridge camera line! As it is a bridge camera it is both simple and complex and any shortcommings can be overcomeIt doesn't have many shortcommings and in time you will learn a few things to keep in mind to get the best photos, professional quality. I'm including a link for a fellow who is a professional photographer and has created over 15 lesson on you tube specifically for the SX50HS..it will all apply to your model too. He goes into detail and explains so much about so many aspects of getting a good shot. Please take the time to look at them you will not be disappointd...I watch them over and over and still learn things! https://www.youtube.com/user/MWESTPhotography

Similar Messages

Why can't Bridge open my raw files from Canon PowerShot 120-S? Using PS/5

Why can't Bridge open my raw files from my new Canon Power Shot 120-S camera? I'm using PS-5 and had no problems with other Canon cameras. I downloaded Adobe Camera Raw 8 but this has not resolved the problem.
Jack

1. you need cr 8.3+ for the Canon PowerShot S120
2. ps cs5 can only update to cr 6.7
free solution: use the dng converter: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
integrated solution: upgrade to ps cc. here are the options (but especially note the photographer plan for 9.99/mo) - http://www.adobe.com/products/photoshop/buying-guide.html

Why wont my MacBook Pick up my Canon Powershot A80?

there are some pictures i want on my mac and it wont read my camera! its a Canon Powershot A80

Did you install the drivers? If not, go here: http://driverscollection.com/?H=PowerShot%20A80&By=Canon
How are you connecting the camera to the Mac? USB?
And, make sure your Finder Preferences are set correctly. Finder/Preferences/General. Make sure the top 4 boxes are checked.
Carolyn
Message was edited by: Carolyn Samit

I have a problem with Canon PowerShot SX 60 Hs-camera with Camera Raw, I cannot open the pictures taken in raw mode. How can I update Camera Raw? I also tried with Photoshop Elements 13, but it was the same, I could not open raw pictures.ts 13

I have a problem with Canon PowerShot SX 60 HS-vamera wirh Camera Raw in Photoshop Elements 12, cannot open raw files. I have the newest version of camera Raw plug in, whats is the problem?

It is on our radar and hoping to add it in an upcoming update.
As soon as it is available, it will be update in the below article.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
~ Arpit

Canon PowerShot SX280 HS disconnects while transferring photos

I have a Canon PowerShot SX280 HS. I can connect it to wifi. It finds my iPhone and works well with the app.
It finds my iMac and it connects: software starts, transfer of images starts, but then the camera is disconnected suddenly, message:
"The camera has been disconnected. The software will now close."
I don't know why it gets disconnected.

Hi
I have recieved a responce from Canon, they asked me to download and install this version:
http://support-my.canon-asia.com/contents/MY/EN/0200234102.html
Setup instruction
1. Download "ibxm-inst-1-1-0-17-u01-9l.dmg.gz" from the download page.
Save "ibxm-inst-1-1-0-17-u01-9l.dmg.gz" to a folder of your choice on your computer.
2. Double-click "ibxm-inst-1-1-0-17-u01-9l.dmg.gz".
After decompressing the file, "ibxm-inst-1-1-0-17-u01-9l.dmg" will be created.
3. Double-click "ibxm-inst-1-1-0-17-u01-9l.dmg". A drive named "IBXM_INST_11" will be automatically generated on the desktop.
4. Double-click the "IBX11INST" inside the "IBXM_INST_11" drive.
5. Follow the on-screen instructions to complete the installation.
But it did nor change anything, I then disabled my firewall, and after that I could download pictures.
I have to run wirh firewall so there have to be a differen solution.
/Henrik

Cck not supporting canon powershot a580 camera?

Hi, i purchased the camera connection kit but for some reason i cannot seem to connect my canon powershot a580 camera using usb.
Same goes for my samsung camera.
using the memory card cck device i also cannot transfer photo's to my ipad.
This goes for all my 7 memorycards, ranging from 2gb upto 16gb.
What is going on here?
Also tried it on my wife's ipad 1 on ios 3.2.2 and then i can ocnnect everying!
Why can't i use any of the devices and memory cards on my ipad 2?
This doesn't make any sense!
I have the 64gb mostly for transfering pictures and showing them on my tv and now i am stuck with to my old ipad1 with only 16gb?
Apple please fix this as this is ridiculous!!!

I have a A60, I use gphoto2 and digikam and works perfect, I only had to edit fstab to allow normal users use the usb, I followed more a less this howto: http://www.phil.uni-sb.de/~nkuttler/os/powershot/

Can no longer play video from Canon PowerShot with QT Pro

Don't know what's changed. I have played these videos many times before. They were taken by my son who is active duty Navy overseas, so they are important to me. The "Movie Info" from QT says the format is: 8-bit Unsigned Integer, Mono, 11.024 kHz/MJPG, 320 x 240, Millions. QT "Movie Properties" list MVI_0025.mov, but the Audio Settings and Presentation choices are greyed out. The Video Trach is shown as MJPG as you would expect. I can't "save as" or "export" so re-encoding is out. I'm at a loss here. Why they played before and not now is beyond me. They were added to my Hard Drive via Iomega's Floppy plus 7-in-1 card reader. The actual video was taken with a Canon PowerShot A510 and recorded to a SanDisk 512MB SD Card which I copied to my hard drive through the card reader with no problems. My G4 runs great with no problems. These videos were added to two logins which both fail to play now. Sound is fine. Anyone have any ideas how this could have happened or what to do?

QuickTimeKirk,
Fortunately I can boot to OS9.2. The problem is that the OS goes so far back in time that I'm not sure I could figure out where to install a codec that would work. And I'm afraid the bigger problem is, where would I download the right codec? (In OS9 that would be a QuickTime plug-in, right?) I tried Classic, using QuickTime 5.0.2. No good. I get the standard message "Some necessary QuickTime software is missing. It may be available on the QuickTime Web site." I guess when I saw MJPG I was really thinking MJPEG and couldn't se why it wouldn't work. I see now that these are very different codecs. Thanks for bringing that to my attention. I did some digging and I believe the codec needed came with QuickTime 2.5. Also, if it makes any difference, I neglected to say that I use Flip4Mac WMV. I don't see how that would adversely effect a video file with a MJPG format but I thought I should mention it. Thanks for responding!

Canon Powershot A75 no longer recognised by iPhoto after 7.1.3 (364) update

We have been importing photos from our Canon Powershot A75 to our iMac G5 (now running Leopard 10.5.2) for some time.
This morning an auto update for iPhoto was applied, taking iPhoto to 7.1.3 (364).
Now iPhoto won't recognise our camera at all. I've tried different USB ports. Made sure it is in photo playback mode. No joy.
Any suggestions?

You might try reapplying the Mac OS X 10.5.2 Combo Update.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

HT201317 Can I access my photos loaded onto my iPad 2 from a Canon Powershot on my iMac running 10.6.8?

I recently took approximately 300 pictures with a Canon Powershot camera during a 2 week vacation. During this time frame I put the photos onto my iPad 2 via an adapter and deleted them from my camera's memory card. Upon return my camera and iPad 2 were stolen. Fortunately I had Photo Stream on and the photos were stored in the cloud. I have since replaced the iPad 2 with the latest iPad and have the photos. I am now attempting to load them onto my iMac and am not able to do it. I am assuming because I have a 7-year old iMac running version 10.6.8 of Snow Leopard I will be able to access and properly store my photos. I am correct?

Save the photos to the camera roll on the iPad, then connect it to your computer with a USB cable. You can import the photos using iPhoto if you have it or image capture if you don't.

Is there a way to import photos from Canon Powershot S45 after downloading Yosemite?

Is there a way to import photos from a Canon Powershot S45 after downloading Yosemite?

I was reading another post yesterday about a Canon PowerShot S40 owner who previously used Image Capture to bring the images into the computer. They reached out to Canon and were returned a response stating that the drivers weren't compatible for OS X Yosemite. The best bet would be a card reader. The JPEG files are still going to be the same, but connecting with a USB cable directly to the camera isn't feasible any more. Head to the nearest Best Buy and pick up a USB card reader and you'll be able to see your pictures in Finder and can then import them to iPhoto or wherever you keep your pictures.

Is the Canon Powershot S2 IS Digital Camera compatible with an ipod photo?

I'm going on a roadtrip to the northwest next month and was wondering if anyone knows whether the Canon Powershot S2 IS Digital Camera compatible with an ipod photo?

You cannot, with a PC or a Mac, transfer photos from a camera directly to the iPod. You need to download the images from the camera to your computer first, then move the pictures from the computer to the iPod.
Not quite sure about that - from the Apple Store (UK):
Simply plug the iPod Camera Connector into the iPod dock connector, plug your camera’s USB cable and watch your images make their way to the iPod, ready to view in a slide show!
Compatible with iPod with color display.
Not compatible with iPod nano.
Requires iPod software v1.1.
See http://www.apple.com/ipod/compatibility/cameraconnector.html for supported cameras.
Regards,
Colin R.

MacBook Air not recognizing Canon PowerShot

I just got home from vacation excited to import photos to my MacBook Air (either using Picasa or iPhoto) from my Canon PowerShot SD3500IS.
For the first time, my MacBook doesn't recognize the camera. I tried connecting to my old camera too and nothing. I tried Googling for the issue and nothing made sense.
An help?

Thanks for the suggestion.
Turns out the memory card had too many pictures on it. I cleared some out and everything worked. Sigh.

Problems with Canon PowerShot SD450 movies and iPhoto (6.0.2)

I recently got a Canon PowerShot SD450 and got a 2GB memory stick for it. I took some movies with the SD450 but am having a **** of a time getting iPhoto to pull movies off the camera that are > 500MB, give or take. Small movies are fine. I've downloaded movies that are 10MB, 50MB, 200MB, all fine.
When I have a > 500MB movie in the camera, iPhoto will try to download it; The hard drive will spin and grind for a few minutes as it, from what I can gather, downloads the movie and then iPhoto will say import complete, but the movie doesn't show up in the library.
Anyone aware of any limitations with iPhoto in that regard? Clip size or something?

Hi Jason,
When iPhoto 5 first came out I really think it was programmed to import the smaller 30 sec video clips that cameras were taking at the time. Since then, digital cameras, at least my Canon S2 can take clips as large as your memory card can hold. The first time I tried to download my images and movie clips with my new camera, iPhoto stalled at the movie clips. I wasn't going to take any chances messing up my iPhoto Library so I started using Image Capture to download all my images and Movie clips. I actually like doing it this way a lot better. My movie clips are downloaded into my Movies folder where I then put them in a dated folder.
My photos are downloaded into my Pictures folder, where I then put them in a dated folder. I import the dated folder into iPhoto. I also keep all dated folders from photo downloads in the Pictures folder till I get enough Movie folders and Photo folders to fill a DVD. I burn them and then delete them from the hard drive.
This way I have the photos in iPhoto and I also have just the photos backed up to DVD.
The Movies I keep on the hard drive in their dated folders until I use all the clips for my iMovie projects for the Year. I then make sure they are all burned to DVD, then I delete those from my hard drive.
Using Image Capture to download images and video clips:
Open up Image Capture which is found in the Applications folder.
When it is opened, go to Image Capture/Preferences
Under the General button choose
Camera: When a camera is connected, open Image Capture.
The next time you connect your camera Image Capture will open.
In the window that opens you will see an Options button. Click on that button to set your options.
To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
iPhoto: How to Change the "Open Automatically" Preference
If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.

IPhoto not exporting description for Canon Powershot

iPhoto is not exporting descriptions for photos taken by my Canon Powershot SX110 IS.
I use the camera to take a picture, import the photo, add a description and use File->Export, choosing JPEG, check box for Title and Keywords, check box for Locations. Perform export and view photo in Preview, view exif using Tools->Inspector. All pertinent exif data is there except description, including keywords and location. Specifically looking at IPTC and TIFF data fields.
However, if I export Photos from my wife's camera (a Canon SLR model) or a friend's Canon EOS model, then the descriptions do get exported. Any ideas or solutions on how to export the description for the Canon Powershot?

I can confirm that. I just imported it to iPhoto and no, I can't see the caption there either. But, and this is odd, there are several blank spaces there - for instance, in the shot below I just typed 'this is a test' where the cursor would let me.
So you can see there is some element of recognition that there is *something* there, which is weird. I tried copying and pasting that out but there are only spaces and no actual text that I can find. This is also repeated with Aperture.
There is some incompatibility between that camera and the Quicktime substructure on the Mac... I've simply never seen anything like this before.

Plugin for Canon PowerShot G 15 camera.

I just bought a Canon PowerShot G15 camera. Shot over 100 pictures in Raw to test out the camera. I used the Canon disk to install their software and followed their instructions. I then downloaded the latest updates from Adobe only to discover that the company has not gotten around to supporting this camera. I have owned Photoshop since Version 7 days, gone through several SLRs and PowerShot G series cameras and have never experienced this kind of omission. Can anyone tell me what is going on and when will I be able to get a plugin to convert my Raw files?

Thanks Mollysnoot!
A thoughtful response.. I already have over three thousand G15 images and DPP is a dinosaur to use. I purchased it four weeks ago and in the past I haven't had to wait this long as an early adopter of new gear. Canon doesn't have a lens profile yet either. About the last thing a person wants to do is buy the latest technology and then find out it's still in the almost ready phase... It's kinda like buying a new car and then finding out that if you turn on the headlights, the stereo stops working. But as soon as Delco Remy gets off it's A$$, it'll be fixed. Until then, suck it up and don't turn on your lights...
David

Canon Powershot sx60HS picture distorted, Why ?

Similar Messages

Maybe you are looking for