Canon print program Easy PhotoPrint

Can I use the Canon print program Easy PhotoPrint with my HP Photosmart 6525 printer? If yes how do I
set up the printer?

I can't find the real cause there, but bsd_qsort crashes seem to be with incompatible other SW mainly.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Similar Messages

Problem with Canon Easy-Photoprint EX

I had to download software compatible with 10.7.4 in order to run a Canon iX6520 Printer, including Easy- PhotoPrint EX. It worked for a while, but now crashes every time I try to use it, just after clicking on "Print". Any ideas on how to correct this?

Never mind (I hope). I think I found the solution in another thread. I had placed the photo I wanted to print on my Desktop, and selected that as the source for my photo. I did not select a folder because they have many photos in them and seemded to take quite a while to load up. However, in another thread I found a comment that Easy PhotoPrint EX only seems to accept folders. So I created a new folder to hold the photo I wanted to print, selected that as the source and it worked. Hopes that makes sense.

Easy-PhotoPrint Prints outside the CD.

I'm using a Canon MP640, and Easy-PhotoPrint to make CD labels. The problem is that it ends up getting printed outside of the CD, so half the layout will be on the CD, and the rest will end up on the tray. I've tried this on another mac with the same OS, which works fine, so I know the printer isn't at fault.
This is what it looks like when I open the print as a PFD
The disc should end up in the middle, and I see no way to edit that. Any ideas?
I've tried different versions of Easy-PhotoPrint.

Harmac95 wrote:>
- Apple - Windows hardware? - does it really matter?
Either.
- Which software? - many have recommended iTunes, is it really the best?
iTunes is most definitely not the best ripping tool. It has no flexibility in file naming, and does not have as good error correction as Exact Audio Copy or Audiograbber.
- Ripping settings? - audio file format???? - hard disk space needed?
This is where it gets a little tricky. Given what you are trying to, an uncompressed audio format like WAV or AIFF would fit the best, and AIFF is probably the better choice since it allows tagging of the files. Figure 10 MB per minute of music, or about 500 MB per CD that you rip. For 800 CDs, allow at least a half TB.
A compressed lossless format would be about half the size, but unfortunately iTunes does not support the leading uncompressed lossless format (FLAC), and the proprietary one that iTunes does support (Apple Lossless) has very little support outside of Apple products. So that is too much of a gamble given your requirement about "use with any player/software in the near future."
That is my opinion! Given that you have pretty strict requirements, and that you only want to do this once, do a little more research before you decide...

Is Canon PIXMA MG8220 supported by Easy-PhotoPrint Pro? Can several printer drives coexist?

According to the Canon site, Easy-PhotoPrint Pro supports PIXMA MG8220, but when the former is automated from Photoshop CC in MacBook Pro it does not find any supported driver. Canon helpers do not answer this question flatly. Would any one know the answer for good? Then, I would like to know where to find which printer drivers are running in that computer, the matter being that I have installed, most certainly unwisely, several.
Thanks for any answer

http://media.onecall.com/Image_Products/Canon/EPPP.pdf
http://software.canon-europe.com/software/0033490_0010722.asp?model
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg8220#D...
Hello again Learner. I am not directly using your equipment, but will throw out ieas until someone with more knowledge provides some input.
I attached a few links that might help. In addition I attached a screen shot from Print Studio Pro. Yours should be similar. Are you saying that your printer doesn't show up in the EPPP dropdown?
Are you able to print directly from Photoshop?
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Easy-Photoprint Pro voor de Canon 9000 Pro printer

Ik installeerde onlangs Adobe CC ter vervanging van Photoshop C6 op een windows 8.1
Ik gebruik een Canon Pixma 9000 Pro voor het afdrukken van mijn foto's.
Hiervoor bestaat een plug-in namelijk Easy-Photoprint Pro.
Die heeft altijd feilloos gewerkt op mijn oude CS5-cersie en nog altijd op mijn CS6.
Maar voor de CC-versie werkt hij niet meer.
Ik heb de nieuwe software bij Adobe gedownload en geïnstalleerd maar dat helpt allemaal niet.
Na contact opgenomen te hebben met Canon zegt men dat het aan de CC ligt.
Ik wordt van "het kastje naar de muur" gestuurd.
Hebben jullie ervaring??
Mvg,
Marcel Martens

http://media.onecall.com/Image_Products/Canon/EPPP.pdf
http://software.canon-europe.com/software/0033490_0010722.asp?model
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg8220#D...
Hello again Learner. I am not directly using your equipment, but will throw out ieas until someone with more knowledge provides some input.
I attached a few links that might help. In addition I attached a screen shot from Print Studio Pro. Yours should be similar. Are you saying that your printer doesn't show up in the EPPP dropdown?
Are you able to print directly from Photoshop?
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Photoshop CS6 - Problems with Canon Easy PhotoPrint Pro!

Hi,
I have been a user of Photoshop for years, starting with CS2, and upgrading regularly.
Currently, I have Photoshop CS6, working on Windows 8, 64 bit!
With every version of PS, I have installed a Canon add in, called Easy Photoprint Pro.
I have found that this provides the best colour match (monitor/Canon Pixma Pro 9000 printer).
With CS 6, I find that as soon as I try and run Easy Photoprint, Photoshop stops working and closes down! (File >> Automate >> Easy PhotoPrint)
I have down loaded both the latest versions of PS from Adobe com, and Easy Photoprint Pro, from Canon - The latter is claimed to be compatible with Windows 8 and Photoshop CS 6.
I have tried disabling all other programs, at start up, and disabling all non Microsoft services; also disabling my Security suit!
I would be interested in hearing if anyone has experience this problem, and has a solution

The problem has been resolved, I think! For anyone interested,
(1) I completely uninstalled all Adobe and Canon software and drivers!
(2) I then deleted all Canon and Adobe folders on my C drive (Program Files & Program Files X 86).
(3) I then ran REGEDIT and deleted All Canon and Adobe Keys!
(4) I then ran CCleaner Registry cleaner!
(5) I then Restarted my computer!
(6) Finally, I reinstalled Photoshop (Updated on line); reinstalled Easy Photo Print and my Canon Printer Driver!
THIS DID NOT RESOLVE THE ISSUE!
I then repeated steps (1) to (5), but started my PC in SAFE MODE!
I then repeated step (6); namely:I reinstalled Photoshop (Updated on line); reinstalled Easy Photo Print and my Canon Printer Driver!
THIS APPEARS TO HAVE CLEARED THE PROBLEM

Compatibility with Canon Easy PhotoPrint Pro - Pixma Pro 9000

Hi,
I have just downloaded and installed the trial version of Photoshop CS5, only to discover that in the Automate (Under Files) option, Canon's Easy PhotoPrint Pro is no longer listed.
I would be interested to know whether this is a Canon, or an Adobe problem
I found that with Photoshop CS3, this method of printing, provided most accurate colours
I would be interested in other subscribers, who print with the Canon Pixma Pro 9000, how they get best results from their printer - What options do you select in the print dialogue box, etc.
Brian

This sounds like a question about general Photoshop CS5 use. This forum is specifically for people using the Photoshop CS5 FXG feature with Flash Catalyst.
I recommend you post this question to one of the more general Photoshop forums:
http://forums.adobe.com/community/photoshop
Your question will get much wider exposure there, and you are more likely to get an answer from the Photoshop community.

Can't find photos using Canon Easy-Photoprint EX

I bought a canon printer with my laptop and when using Canon Easy-PhotoPrint EX I can't find my pictures from iPhoto in the menu. I can put a photo on my desktop and find and print it but am having trouble locating my photos already uploaded into iPhoto. Any suggestions?

Tom
Welcome to the Apple Discussions.
If the application does not interface with iPhoto then you're options are as follows:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Canon easy-photoprint ex quit unexpectedly

Hi all,
My Canon printer works fine, except when I want to use the Easy-Photoprint Ex app, it "quit unexpectedly" everytime I try to start it.
I have just try the ways suggested here, Repair Permissions/ and I dont have a Get Info on it in the Finder.
I am not sure what is crashing with the software.
Please suggest any solution!
Thanks!

I can't find the real cause there, but bsd_qsort crashes seem to be with incompatible other SW mainly.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Canon Printer MG5420. How can I save a scanned document in the Word format?

I can only find the option to save scanned documents in the PDF format. I want to know if there is a way to save in Word. Can anyone help me? Canon Printer MXZ5420.

Hello Yvonne.
Specialized OCR software may be needed in order to save files directly to Microsoft Word format. Our software does not have this capability.
If you are attempting to scan a basic, text-only document. You can use our IJ Scan Utility to scan and make adjustments.
1. Start, point to (All) Programs, Canon Utilities and then open the Canon IJ Scan Utility.
2. Click 'Settings' on the lower right corner.
3. Click 'Document Scan' on the left.
4. Under 'Application Settings' on the right, select 'Start (OCR)' and choose 'Canon My Image Garden' in the menu.
5. Click OK.
6. In the IJ Scan Utility, click 'Document'.
When scanning is completed, Notepad will open and you will be able to edit and save your document.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Explain flow of standard cheque print program

Hi All,
Can anybody explain the flow of standard cheque print program RFFOUS_C.
The standard cheque print program will use Z form layout to print cheque and remittance advice.I have to add few form routines for RFFOUS_C. Also explain the functions of below mentioned form routines.
Form routines:
FM_CHQ_AMT
Move protective u201C*u201D from field REGUD-SWNES and load value into AMOUNT_CHEQUE.
FM_REMOVE_STAR
Move protective u201C*u201D from field REGUD-SWNES and load value into AMOUNT_FIXED.
Append the currency to the end of the value in AMOUNT_FIXED (if Currency = ZAR u2013 append the value R)
FM_CHQ_AMT_WORDS
u2022 Remove extra spaces from the amount in words
u2022 If currency = ZAR insert the word RANDS after the Rands amount else insert the value in field REGUD-WAERS
u2022 Combine Rands value and the cents value with the text -AND- (i.e. Rands value u2013AND- cents value)
u2022 End the cents value with the text CENTS
u2022 End the amount in words with the text u201C-ONLYu201D.
u2022 If the amount text is longer than 52 characters split the text into two lines (line 1 (AMOUNT_WORD_1) may hold 52 characters and line 2 (AMOUNT_WORD_2) may hold 62 characters u2013 maximum capacity for writing cheques).
u2022 Overlay any spaces with the character u201C|u201D

International Payment Medium - Check (with check management)
Description
This program prints prenumbered check forms or non-prenumbered checks whose number is to be assigned from a predefined number range, and links the check number to SAP payment document number or the check number to the settlement result.
In addition to the checks, you can print their payment advice notes and payment summaries in one program run.
Requirements
Check lots
The checks which are ready for printing are divided up into lots. The user can freely define the criteria by which lots are formed (for example, location of check storage, accounting clerk or printer). The check numbers of a lot must be consecutive.
A lot is assigned to the checks to be printed via a parameter whose number you define via the corresponding check lot management in the system.
After entering the lot number, the print program independently searches for the first free check number (even if this is in the next lot rather than in the lot specified).
Payment Program Configuration
The parameters that control the way in which the payment medium programs function are configured in Customizing. For more information on configuring the payment program, refer to the Implementation Guide.
1. Here you need to make specifications for the paying company code. To do this, select the relevant paying company code by choosing Paying Company Codes ->.
If payment advices are to be printed, define a SAPscript payment advice form for use with all company code payment methods. You will find the form F110_D_AVIS as an example in the standard system.
You need to create and enter text modules in which the texts for the header, footer, signature and sender are stored. These modules can be included in the forms when they are used. To do this, choose Sender Details, from where you can also branch into text maintenance by selecting the modules. The names of the text can be defined by the user, for example F_0001_HEADER for the letter header in company code 0001.
2. Here you need to allocate the name of the payment medium program RFFOUS_C to the payment method to avoid incorrect payment media being issued with another program by mistake.
Furthermore, you can enter a short name (or 'print dataset', for example LIST1S) which makes it easier to find the generated forms in the print manager.
To do this, first choose Payment methods in country, then select the country of your paying company code and the payment method you require, and then maintain the data necessary for printing the form.
3. Here you need to make company code specifications for the payment method. To do this, choose Payment Methods In Company Code, then select the paying company code and the payment method. In this menu maintain the following data by choosing Form data or Payment Advice Control:
The SAPscript form for payment media (F110_PRENUM_CHCK in the standard system).
The issuer data.
Sorting the correspondence.
Sorting the line items.
The number of note to payee lines on the form and the payment advice note output in accordance with the specified number of lines
If you specify as many as required note to payee lines on the form then Payment Advice Output According to Number of Lines controls whether in addition a payment advice is always created or not.
Note: The issuer details are used on the payment medium for city and signature in the standard system:
Line 1 Name 1 of issuer
Line 2 Name 2 of issuer
Line 3 Blank
Line 4 City.
Setting up and changing the SAPscript forms (layout sets)
The following describes the layout of the SAPscript forms in brief. If the forms available in the standard system are sufficient for your requirements, you can skip this part of the documentation.
You can find further information on forms and the SAPscript editor in the guides on styles and form maintenance and word-processing in the SAPscript editor: Select the menu path Help -> SAP Library.
1. When setting up SAPscript forms (layout sets), symbols are included in the text; these are then replaced by actual values when the payment medium programs are run. The fields which can be used for this are defined in the Repository and contained in the following structures:
REGUH Settlement data from the payment program
REGUP Edited invoice items from the payment program
REGUD Formatted data for printing the forms
SPELL Amounts and digits in words.
FSABE Data on accounting clerk.
Note that check forms can be issued in foreign currency only if the currency key is also printed on them. If forms are only to be filled out for local currency checks (on which no space is defined for the currency key) then you should remove the symbol for the currency key &REGUD-WAERS& from the check window. The program then prevents you from printing foreign currency checks.
2. If you want the document long text for an accounting invoice document to be printed on the payment advice form, you must make the following enhancement in element "Long text for invoice document" (specially designed for this purpose):
/: DEFINE &TXT& := '&REGUP-BUKRS()&&REGUP-BELNR(RF0)&&REGUP-GJAHR&'
/: INCLUDE &TXT& OBJECT BELEG ID xyz
The text ID that you must enter for this text (xyz) is defined in the configuration menu and can be read from there. In the standard system, text ID 0003 is predefined for the payment advice information.
Periodic processing
Before the payment medium programs can be started, the payment program run must have been successfully completed. Check the status of the payment run, or schedule the payment medium programs by specifying one or more variants.
Note: If you want to use th 'Payment document update' option, the payment documents must be updated between the time of the payment program run and the time of the payment medium program run.
Output
Forms and lists
Printout files are created per company code and house bank. These can either be printed via the print manager or immediately. Depending on the parameter you select, you can print out one or more of the following:
Payment medium
Payment advice notes (if the information cannot be sent via EDI)
Payment summary
Error log
The number of output files is specified in the flow trace; this makes finding and allocating them within the print manager easier.
Note: If the program was started online, then you reach the print manager from the list by selecting one of the output files displayed.
Payment Advice Notes
In addition to being able to print payment advice notes, you can also send these via EDI, fax or email.
1. To send a business partner a payment advice note via EDI, you need to select the indicator Payment advice note per EDI and maintain the partner agreement on screen "Payment Transactions Accounting" in the master record.
Using an external converter, the IDoc created by the program can be converted into the EDI format you require (REMADV for example) and then sent.
2. To send a business partner a payment advice note by fax or email, you must use the process interface 00002040 (Business Transaction Events) to define the selection of the message type (printout, fax or email). Before you can do this, however, you must have carried out the necessary technical (Basis) settings for faxing or sending emails.
Process interface 00002050 can also be used to change or configure the print parameters and the parameters for optical archiving for payment advice notes.
Check management
You can access information about the issued checks via check management, line item display for sub-ledger or bank accounts, or invoice and payment document display. A check register list can also be created for the respective payment run. Errors occurring during check number and document number allocation can also be rectified using check management. You can find check management within Accounts Receivable or Accounts Payable, both parts of Financial Accounting, as well as under the "Environment" menu option in the payment program.
For more information on check management, esp. about detailed solutions to possible error situations, refer to the FI Accounts Payable manual under Help->R/3 Library.
Error messages and error log
Termination of processing
You can find out the reason why processing was terminated (for example, production run not yet carried out, form does not exist or is not active) by looking at the error message or the related long text.
Internal SAPscript error
Check the layout of the forms. It must fulfil the above-mentioned conditions. You cannot, for example, create a bank transfer with the check print program, since bank transfers and checks have a completely different layout structure.
Error log
If errors which do not terminate the payment medium program occur when creating the output, the system lists them in the error log. If such a log is created, you must look it over because only you can decide whether the payment medium or payment advices are useless due to the errors the system finds, and decide whether they must be recreated after the errors have been rectified.
During background processing, the system outputs the error log twice, in the flow trace for the job and in a printout file. The flow trace contains information on how to rectify the errors (from the error message long texts).
You can display the long text online by choosing the error log from the list of generated output files and then the error message in question.
Close the thread once your question is answered.
Rgds,
SaiRam

PO standard print program

Hi experts,
I have a requirement where we will dsiplay the PO output in different layout(landscape orientation, all items shown in one line only, additional info to be displayed). Now, the functional designer requires us to use the sap standard print program and sapscript for PO because they said it will require less development time. So basically we have to copy the standard program and sapscript to fulfill the requirements. But is it really easier to do the enhancemments required in sapscript than by using smartforms? I am more familiar with smartforms so I don't know if it will be easier to change the layout using a copied standard sapscript and print program.
Please let me know your thoughts. POints wil be rewarded.
Thanks,
Eric

Hi eric,
The entire scenario is depends upon the requirement and the main thing is in which version ur working in to.
If it is ECC 6.0 I would suggest you to go for smartforms the reason is script has got already migrated and for future modifications also smartforms are easier compare to script as well.
In future anticipations if you have to make some changes if it's not available in script the entire thing will get messed up.
More to that considering the system point of view the execution of smartforms in much effective than script .
My point is if there is not major changes only kocking off certain fields and no no need to add anyting new means u can go for script else better go with the smartforms.
Thanks and Regards,
Arun joseph

Calling print program from co03

hi all,
we have a requirement to print the production order through smartforms .
the process is like...if we click on functions--->print ..then a print program is called..which fetches the production order number from in co03...and then the print program fetches all data related to that order.
but i dont know how to fetch the production order number and input it to print program..
any pointers?..
(plzz have the complete detailed solution which would be easier to implement)
thanks

Hi Kunal,
You will have to configure the form and print programs using tcode OPK8.
For detail, please have a look at print program PSFCCONF and smartform PSFC_STD_LAYOUT.
Just structure your Z print program according to the standard print program.
Regards
Sagar

Problems printing from illustrator to Canon printer

I have problems with printing from Illustrator CS4 to a Canon printer i-Sensys MF8050 (printing
from Illustrator to a Epson stylus Photo R2400 is no problem).
Printing from Photoshop to the Canon printer is also no problem. I
refreshed the preferences (did not help).
Operating System: Mac OS X (v10.6)
Printer driver version: 3.3
Usb connection
Canon believes it must be a problem with the illustrator program; it sends the wrong signs to
the printer.
After sending print to printer the printer reports that the A4 tray is empty, but is is still full.
What is going wrong, who can help me out?

Thanx Mike,
Reinstalled the printer softwear but it didn't resolve the problem.
But your suggestion to print illustrator pdf file in Acrobat is good solution for the moment.
I think something is wrong with Illustrator, because starting up the printing module is also taking a long time.
Did download the latest up date from illustrator to day, but that also didn't resolve the problem.
And you are right.... 3.3 is the fax driver

I have macbook pro w existing iPhoto library. Now have Canon printer and loaded Canon software for same. Cannot access iPhoto library from Canon software, but prints fine from iPhoto. How can I use iPhoto library w Canon software?

I have a macbook pro w exisitng iPhoto library. I now have Canon printer and loaded Canon software for same. I cannot access iPhoto library for use from Canon software. I can print from iPhoto directly to new printer without problem. How can I use iPhoto library with Canon software? I would like to try the software to see which I prefer...

Simply export some photos from iPhoto to a folder on the desktop and experiment.
Without telling us even what this program is, not to mind what it does, that's the best anyone can suggest.
Regards
TD

Canon print program Easy PhotoPrint

Similar Messages

Maybe you are looking for