CANON PRINTER 5400 - Printer not accepting INK REFILLS from Costco - saying Support 1600

Message says I should replace INK Tanks -
I just put in original - all refilled - ink cartridges that came with printer when I bought it at Costco only 6 months ago...
Costco did the refills...
Anyone know why I'm getting Support code 1600?? ...
"The ink may have run out
Replacing the ink tank is recommeneded"
How do I correct this situation?
I've done everything I can think of - rebooted the printer, downloaded new Canon printer driver software for the 5400...

Back up all data.
Triple-click anywhere in the line below to select it:
find L* -iname *MyImageGarden* -prune | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot.

Similar Messages

My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?"

My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.

Hello buddyacw
You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

Hi, I'm helping StringSinger2 with this problem.
The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
SO...
When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
Many Thanks!

Printer not-accepting APP-FND-00500: AFPPRN received a return code of failu

Hi Gurus,
skgtag: not-accepting APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1.
This is my error. My same request output is printing to other printers. But it is not printing in particular printer.
My printer is shared is windows 2000 system and we have installed Unix files & printer sharing windows feature.
while executing below command from soloris command line
lp -d skctag -n 1 sona
skgtag: timed out error is coming please give advice in this.

Hi Hussein,
Now concurrent is completed normally without any warnings.
Server OS Level
Now it is not showing any error but printout not coming in printer.
lp -d skctag -n 1 /rman_backup/PROD_rmanfullbkp.sh
request id is skctag-60 (1 file(s))
But printout not coming ....
Concurrent Log file for your reference.
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 50089046
Number of copies : 1
Printer : skctag
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 07-JAN-2013 11:14:08
---------------------------------------------------------------------------

Printer not accepting print commands

I have this laserjet printer M1213nf MFP which is not accepting print command. but its accepting ither commands of scanning and copying the documents. the serial no of the printer is [Personal Information Removed]. kindly revert back as soon as possible.
thanking you.

Hi , I read your post and see that you can scan and copy, but you are unable to print. I will certainly do my best to help you. Download and run the Print and Scan Doctor, it will diagnose the issue and might automatically resolve it. What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)How is the printer connected? (USB/Ethernet) If you appreciate my efforts, please click the 'Thumbs up' button below. If there is anything else I can help you with, just let me know. Thank You.

SQL Developer not accepting certain characters from the keyboard

Hello,
I have been using SQL Developer for 5 or 6 months now, with minor issues and great satisfaction.
A few days ago, just out of the blue, in the middle of the day, SQL developer started not accepting the following characters:
Ctrlv, Ctrl + c, F5, F9 (I Think all function keys), BackSpace, Delete, Enter and arrow keys.+*
T*his is only happening in the text editor part*. I am able to use this keys in the results, whether they were a script output or an execute query output.
SQL developer also functions properly (if i paste using the mouse, paste works.. and all the other keys)
I checked the pc for viruses, using AVG, no viruses were found (my avg is updated daily and runs daily virus checks on a schedule, and this issue has been here for the past 1 or 2 weeks, so it was a virus, i think it should have been discoverd, besides, the keys are still working in sql developer, only not in the text editor part)
Needless to say, but if i run notepad and type, keys work properly.
I also reinstalled it in another folder with no luck
Tried so many restarts .. no luck
Tried it in safe mode .. no luck
I am using SQL developer Version 1.5.4, Build MAIN-5940.. on Windows Xp
I am suspecting there's some option in it that I disabled without paying attention..
HELP!!!
Regards,
Charles

All that time trying possible solutions is understandable, but then typing them in your post... when searching the forum would have given you the solution under 1 minute:
Preferences - Accelerators - Load Preset - Default
Hope that helps,
K.

Canon printer not print MP560

Here the problem,
I was using my printer just fine with my macbook but then last week I accidentally started to print something so I paused it. From that point on it won't work. I went into the printers section and I resume printing. That didn't work. It kept saying off line. Then I went to the queue and deleted the job in it. Still wouldn't work. So I opened it again today and I reset the printing system and tried to reinstall it hoping I would be back at square one. Didn't work. Now all it says it "Idle, last used." So I tried printing a test page. Printed fine. I tried printing a document again and it just sits there like it's not talking to the computer. The printer icon no longer shows up in the bar at the bottom of the screen either. Help. What do I do?
nicole

Hi Niki 74,
I'm sorry to hear you are having these issues with your MacBook Pro. It sounds like you have been on the right track in your troubleshooting. If you continue to have issues printing to your Canon MP560, you may find the troubleshooting steps outlined in the following article helpful (some of which you have already done, but you may want to revisit them in the order listed):
OS X Yosemite: Printing troubleshooting
Regards,
- Brenden

Canon printer not printing even though query says "printing"

I am having problem setting up my printer (Canon MF4350d) with Mac.
I installed the printer by using the disc provided with the printer. Everything went fine. When I try to "print" I see the printing query, and it even says x% is sent over and such. But… when in fact, nothing is actually being printed out at all.
I looked at the following setting:
Printer & Fax -> Option & Supplies -> under the tab "Driver" I have Generic PCL Laser Printer selected because my printer model is not on the list. I don't know if that might be the reason…
My printer says Canon MF4320-4350
I have Mac OS 10.6 Snow Leopard
I looked up in the other thread (Click here: http://discussions.apple.com/thread.jspa?messageID=12440612#12440612)
I don't see the UFR2 folder under Canon :/
Please help.
Thank you in advance.

Lin365 wrote:
I looked at the following setting:
Printer & Fax -> Option & Supplies -> under the tab "Driver" I have Generic PCL Laser Printer selected because my printer model is not on the list. I don't know if that might be the reason…
This will be the reason. The MF4350 does not support the PCL or Postscript printing languages. You need to use the proprietary Canon UFRII driver. Delete this print queue as it will not work.
I looked up in the other thread (Click here: http://discussions.apple.com/thread.jspa?messageID=12440612#12440612)
I don't see the UFR2 folder under Canon :/
Then this would indicate that you have not installed the Canon UFRII driver. Rather than using the provided disc I suggest you download the UFRII driver from the [Canon web site|http://www.usa.canon.com/cusa/support/consumer/printersmultifunction/imageclass_series/imageclassmf4350d#DriversAndSoftware]. After you download and unpack the file you can run the installer which will create the UFR2 folder under the Canon folder.
Once the UFR2 driver has been installed you can then select to add the printer, this time ensuring the Print Using menu shows the MF4350. Note that when you do select the printer you will get a prompt stating that the driver is not installed. Ignore that and open the Print Using menu and click 'Select printer software'. This will present a list of installed drivers and a search window. Type MF43 and you will see the MF4350 UFRII driver in the list. Select it and OK and then click Add to complete the new print queue creation. Now try printing - this should get a lot further than the previous Generic PCL.

Canon printer not recognised

I have failed to install a Canon IP4600 on a macbook with Mac OS X Snow Leopard.
I downloaded a driver from the Canon site, apparently successfully, but can't find the printer. To print anything I have to send the file to my PC and print from there.
Help please

Your post has landed in the 10.5 Leopard SERVER forums. You have not specified what Server set-up you are using or how your printer is connected to the Server.
If you are not running Mac OS X SERVER, you may want to re-post in the Mac OS X forum for your version of Mac OS X, which would be 10.6 Snow Leopard, If I am reading you correctly.

I can't print. the accept of terms from the e print won't come off the screen

The eprint accept terms shows up on the screen. when I hit ok nothing happens and now I can not print

I will love to help you but in order to so I need more information such as complete printer model and operating system you are using in your current computer(s) or device(s)
Take the time to read this post it will help you better formulate your post to maximze the probability of suggestions and will increase the chances of you getting your problem solved.
CLICK HERE
Please post agian after reading I will do my best of assist you with the problem you are having;
RobertoR
And remember....
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

FC will not accept MP4 converted from Handbrake.

I used Handbrake to convert a DVD(not a copyright issue) to a MP4 file.I-Movie will accept it, but not FC. FC will not let me bring it over from I-Movie either. Gives this message, file Error:1 file recognized, 0 access denied, 1 unknown. Any ideas, how I can get FC to recognize the file.

Hello, and welcome to the FCE Forum!
Handbrake is not the right app to convert DVD video for editing in FCE. (Technical reasons in the conversion process.)
You should use MPEG Streamclip instead. It's free. However, you also need the QuickTime MPEG2 Playback Component if you don't already have it on your Mac. ($20, downloadable from the Apple Online Store).
In MPEG Streamclip, convert the video to QuickTime using either the Apple DV/DVCPRO-NTSC or Apple Intermediate Codec compression scheme.

Canon LiDE 100 does not respond after wake from sleep

I have a Canon LiDE 100 flatbed scanner. I constantly put my iMac to sleep and only ever shut it down once every few weeks.
When the computer wakes from sleep the scanner does not respond. Image Capture lists the scanner in the device list but reports the following error;
"An error occurred whilst communicating with the scanner"
I have to unplug the USB cable and plug it back in for it to work (or restart the computer, both always work).
Since I only moved to the Macintosh in July I have no idea how to uninstall drivers to give myself a fresh start and the scanner does not come with an uninstall utility.
Any suggestions on how to fix this little problem?
Thanks.

I am going to respond to my self and say I am nuts.
Canon does not seem to have any uninstaller for this scanner on their site:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=351&modelid=17104
Which is rather odd since they have installers. this is different from most of their other older scanners. But if you just plugged in our scanner and things worked in OSX, which it should have, then you should be OK.
However I can confirm that others see this issue (like my dad) and here is the official Canon response to the issue:
+Dear XXXX:+
+In some cases, coming out of sleep mode may not properly reinitialize+
+the USB bus on Macintosh Operating Systems. Unfortunately, the only+
+work around when this happens is to restart the computer.+
Of course this in not exactly true as logging out and back in fixes it.

Sony RPLCD TV not accepting HDMI connection from AppleTV

I have a rear projection LCD Sony KDF-55wf655 TV and have had it for years. I had my ATV hooked up to the TV through an HDMI switch in my AV closet. All was good, everything worked perfectly. I then decided to move my components out of the closet and under the TV. So now I have everything connected, just close to the TV. I cannot get the Sony TV to display the output from the ATV over HDMI. I connect the ATV via component and it works great. I take the ATV upstairs to my plasma and HDMI works great. I tried resetting the ATV to factory settings, didn't work. I tried resetting the Sony TV, didn't work. I tried unplugging and replugging everything in every order, didn't work. I'm not sure what else to do, but it seems it's something in the Sony TV not allowing the HDMI connection now...but why? What can I try? I'm desperate.

Anyone have any ideas I can try? Still would love to get HDMI working from my appletv on this one set. My Panasonic plasma has no issues playing HDMI from my ATV.

Ipod nano not accepting synced music from itunes

Somehow my music erased from my ipod during my last charge. Now when syncing my music from itunes the music is not going on to the ipod. Any answers out there?

Try restoring your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

10.5 - 10.6.2: Postfix not accepting e-mails from certain hosts

Hi
Two days ago we migrated our server from 10.5 Server to a new Mac mini server running 10.6.2 server.
We are now facing the problem that postfix refuses to accept incoming e-mails from most hosts. Some hosts seem to be able to get through, but so far we haven't be able to identify a pattern.
The transfers just times out with various error messages. Below is one of the shorter transscripts. Any ideas where to start looking?
Feb 5 18:36:12 www postfix/smtpd[34067]: connect from pluto2-mail.kagi.com[67.134.14.166]
Feb 5 18:36:12 www postfix/smtpd[34067]: setting up TLS connection from pluto2-mail.kagi.com[67.134.14.166]
Feb 5 18:36:13 www postfix/smtpd[34067]: Anonymous TLS connection established from pluto2-mail.kagi.com[67.134.14.166]: TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)
Feb 5 18:36:14 www postfix/smtpd[34067]: 42ABB92A50: client=pluto2-mail.kagi.com[67.134.14.166]
Feb 5 18:41:14 www postfix/smtpd[34067]: warning: networkbiopairinterop: error reading 5 bytes from the network: Connection reset by peer
Feb 5 18:41:14 www postfix/smtpd[34067]: timeout after DATA (986 bytes) from pluto2-mail.kagi.com[67.134.14.166]
Feb 5 18:41:14 www postfix/smtpd[34067]: disconnect from pluto2-mail.kagi.com[67.134.14.166]
Thanks,
Ilja

Hi again,
I was able to further narrow down the problem. The remote server is sending a complete message but postfix on our mac doesn't recognize the end of message token, thus timing out the connection after 5 minutes.
Any ideas? Is this a postfix issue? If so, what can we do about it.
<pre>
0x02e0: 2039 3437 3039 2d31 3430 3520 2055 5341 .94709-1405..USA
0x02f0: 0d0a 5351 4e4d 2d6b 6167 6920 3531 3530 ..SQNM-kagi.5150
0x0300: 0d0a 0d0a 0d0a 0d0a 0d0a 5343 2d54 4659 ..........SC-TFY
0x0310: 5020 352e 3068 0d0a 2e0d 0a P.5.0h.....
19:43:28.538241 IP (tos 0x0, ttl 64, id 8917, offset 0, flags [DF], proto TCP (6), length 64, bad cksum 0 (->9605)!)
www.mydomain.com.smtp > terra.kagi.com.45495: Flags [.], cksum 0x8210 (incorrect -> 0x4852), seq 291, ack 1186, win 33304, options [nop,nop,TS val 928896121 ecr 2567915589,nop,nop,sack 1 {4082:4825}], length 0
0x0000: 4500 0040 22d5 4000 4006 0000 6d46 c4f2 E..@".@[email protected]..
0x0010: 4386 0c1f 0019 b1b7 685e 0685 d895 c111 C.......h^......
0x0020: b010 8218 8210 0000 0101 080a 375d d479 ............7].y
0x0030: 990f 4845 0101 050a d895 cc61 d895 cf48 ..HE.......a...H
</pre>
<pre>
19:48:28.318858 IP (tos 0x0, ttl 64, id 27393, offset 0, flags [DF], proto TCP (6), length 118, bad cksum 0 (->4da3)!)
www.mydomain.com.smtp > terra.kagi.com.45495: Flags [P.], cksum 0x8246 (incorrect -> 0x0c90), seq 291:345, ack 1186, win 33304, options [nop,nop,TS val 928899117 ecr 2567915589,nop,nop,sack 1 {4082:4825}], length 54
0x0000: 4500 0076 6b01 4000 4006 0000 6d46 c4f2 E..vk.@[email protected]..
0x0010: 4386 0c1f 0019 b1b7 685e 0685 d895 c111 C.......h^......
0x0020: b018 8218 8246 0000 0101 080a 375d e02d .....F......7].-
0x0030: 990f 4845 0101 050a d895 cc61 d895 cf48 ..HE.......a...H
0x0040: 3432 3120 342e 342e 3220 7777 772e 6977 421.4.4.2.www.iw
0x0050: 6173 636f 6469 6e67 2e63 6f6d 2045 7272 ascoding.com.Err
0x0060: 6f72 3a20 7469 6d65 6f75 7420 6578 6365 or:.timeout.exce
0x0070: 6564 6564 0d0a eded..
19:48:28.321859 IP (tos 0x0, ttl 64, id 46435, offset 0, flags [DF], proto TCP (6), length 64, bad cksum 0 (->377)!)
www.mydomain.com.smtp > terra.kagi.com.45495: Flags [F.], cksum 0x8210 (incorrect -> 0x3c67), seq 345, ack 1186, win 33304, options [nop,nop,TS val 928899117 ecr 2567915589,nop,nop,sack 1 {4082:4825}], length 0
0x0000: 4500 0040 b563 4000 4006 0000 6d46 c4f2 [email protected]@[email protected]..
0x0010: 4386 0c1f 0019 b1b7 685e 06bb d895 c111 C.......h^......
0x0020: b011 8218 8210 0000 0101 080a 375d e02d ............7].-
0x0030: 990f 4845 0101 050a d895 cc61 d895 cf48 ..HE.......a...H
</pre>
Regards,
Ilja

CANON PRINTER 5400 - Printer not accepting INK REFILLS from Costco - saying Support 1600

Similar Messages

Maybe you are looking for