Canon printer not printing even though query says "printing"

I am having problem setting up my printer (Canon MF4350d) with Mac.
I installed the printer by using the disc provided with the printer. Everything went fine. When I try to "print" I see the printing query, and it even says x% is sent over and such. But… when in fact, nothing is actually being printed out at all.
I looked at the following setting:
Printer & Fax -> Option & Supplies -> under the tab "Driver" I have Generic PCL Laser Printer selected because my printer model is not on the list. I don't know if that might be the reason…
My printer says Canon MF4320-4350
I have Mac OS 10.6 Snow Leopard
I looked up in the other thread (Click here: http://discussions.apple.com/thread.jspa?messageID=12440612#12440612)
I don't see the UFR2 folder under Canon :/
Please help.
Thank you in advance.

Lin365 wrote:
I looked at the following setting:
Printer & Fax -> Option & Supplies -> under the tab "Driver" I have Generic PCL Laser Printer selected because my printer model is not on the list. I don't know if that might be the reason…
This will be the reason. The MF4350 does not support the PCL or Postscript printing languages. You need to use the proprietary Canon UFRII driver. Delete this print queue as it will not work.
I looked up in the other thread (Click here: http://discussions.apple.com/thread.jspa?messageID=12440612#12440612)
I don't see the UFR2 folder under Canon :/
Then this would indicate that you have not installed the Canon UFRII driver. Rather than using the provided disc I suggest you download the UFRII driver from the [Canon web site|http://www.usa.canon.com/cusa/support/consumer/printersmultifunction/imageclass_series/imageclassmf4350d#DriversAndSoftware]. After you download and unpack the file you can run the installer which will create the UFR2 folder under the Canon folder.
Once the UFR2 driver has been installed you can then select to add the printer, this time ensuring the Print Using menu shows the MF4350. Note that when you do select the printer you will get a prompt stating that the driver is not installed. Ignore that and open the Print Using menu and click 'Select printer software'. This will present a list of installed drivers and a search window. Type MF43 and you will see the MF4350 UFRII driver in the list. Select it and OK and then click Add to complete the new print queue creation. Now try printing - this should get a lot further than the previous Generic PCL.

Similar Messages

Flash Player 10.1 is not installed even though message says it was successful.

Hello,
I use W7 Ultimate, 64 bit, and IE 8. Whenever I try to watch video a message says I need to upgrade Flash Player and gives me a link to version 10.l
I uninstalled version 10.0.32.18, then downloaded and installed version 10.l. A message says the installation was successful. However, I still get the same message and link whenever I try to watch video. I tried repeatedly with the same results. Each time Update Checker identifies the installed version as 10.0.32.18 even though an Adobe message says the installation of v.10.1 was successful.
Can anyone help?
gbsib

Hi,
I got rid of Update Notifier, and I use Adobe Acrobat 9 Pro but am not a developer.
I honestly thought I was following all your instructions to the letter. I skipped some steps in my last post, but here is everything I really did.
I used the Administrator account, closed all applications, set the Internet security to Medium, put *.adobe.com in Trusted sites and set Internet security to low for it, removed real time protection for my antivirus, used Advanced Settings to disable the firewall, downloaded the Flash Player installer and uninstaller to the Desktop, disconnected the Internet, and closed all browsers.
The uninstaller was then run. Then the installer was run. The computer was booted . It was then rebooted. The insaller was run again. The computer was rebooted. The Internet was connected.
Please look over each step and if I'm skipping something I'll add it before trying again.
Date: Thu, 17 Jun 2010 09:34:27 -0600
From: [email protected]
To: [email protected]
Subject: Flash Player 10.1 is not installed even though message says it was successful.
Hi gb, I think that you are relying on this Update checker too much. Early on, you confirmed what Flash files were installed. What the Update Checker reports is not correct, sorry. The proof in the pudding is what Flash Player files are Installed.
In Post#2, you had the correct Flash files Installed, regardless of what the Update Checker said. I can't use the Update Checker as the Standard on whether you have Flash Player Installed or not and you shouldn't either. This is getting too confusing.
The only issue you had was the Shockwave Flash Object did not Install and I posted the reasons in Post#6.
There is a procedure to Uninstall Flash Player and to Install Flash Player and it appears that you are relying on other programs to dictate.
Also I have never heard of anyone using the Adobe Update Manager for Flash Player. Perhaps you should read up on it and see if you really need it.
Are you a Developer? My suggestion would be to take a look in Programs and Features via Control Panel and see if all of the Adobe Programs you have Installed are needed. Then check your IE add ons for the same.
My Post# 6 still stands. Until that is corrected, there is nothing more that can be done. That Update Checker, does is have a website? If it is identifying those 2 files as Flash Player files, then I know I wouldn't be using it and you shouldn't either.
Regards,
eidnolb
>

IPhone 5s not charging even though it says it is.

I just got my new iPhone 5s two-three days ago and randomly my phone charger is acting weird.
It keeps saying "This cable or accessory is not certified and may not work reliably with this iPhone" which makes no sense because
1. I got the charger from the box it came with.
2. I switched it out with another from my at&t store.
3. It kept saying it so i went to apple and they exchanged it for me.
so there is no way my charger is "not certified".
I tried resetting it, turning off my phone completely and turning it back on after maybe 10 minutes, I checked for lint even though it's completely brand new, and I dismissed those messages a bunch of times (still doesn't work). I literally did almost everything that I could find on google but nothing is working.
The phone keeps on saying it's charging when it isn't when I plug it into the wall charger and for some reason it doesn't even say it's charging when I plug it in into my laptop.
It was working perfectly before (the past two-three days) but I don't know what happened.....

Your phone is under warranty, so if this is a hardware issue, you should be able to get the phone itself exchanged at no charge.
Backup your phone, then erase it and set it up as new. Does it still insist it's charging when it's not, there's a hardware fault with the phone and it needs to be replaced.
~Lyssa

I can't get my printer to print. It says printer not connected even though I connected it earlier and it printed once.

I need help in getting my printer to print

What kind of printer is it? Did you look at the "More Like This" sidebar?

My 8500a pro won't print even though it says printing. i have to turn it off and then on again.

I have to turn it off and on again to get it to print.

Try upgrading the product firmware following the below steps:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
Apart from that, if you are using Wifi connection, try selecting IPv4 connectivity.
To do that, you can go to the printer ip address from your PC browser (http://xxx.xxx.x.xxx)
Select the Network tab> Network Protocols> Enable IPv4 Only.
Some times, the network environment is contributes to unstability. Above mode at times does help resolve this issue.
I work for HP.

IBook will not download even though it says it has already downloaded

Hi everyone,
I'm having an issue with a couple of iBooks I have recently downloaded. The iTunes store says that these books have downloaded already, however I cannot open them on my iPhone because it says that they are still downloading. Because I downloaded these books about a day ago, they should have completely downloaded on my phone by now; yet, my phone says there has been no progress in downloading the items. I've tried everything, from restarting and restoring my phone, to deleting the file and then redownloading it but nothing is working. I am having this problem with a couple of iBooks, but not ones that I purchased previously. Anyone have any advice? I'd very much enjoy reading books that I bought...
Kind regards,
Song02
P.S. I should mention that I have the latest software for iTunes, iBook, and the iPhone, so I don't believe the problem is due to old software.

Hey Caseyb1tx,
I'd take a look at the following two articles to see if they can resolve the issue you're experiencing:
iTunes: Downloading iTunes for Windows using Internet Explorer
http://support.apple.com/kb/TS3212
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
The File Download window will ask you to Run or Save the iTunes file you are downloading, try choosing each option to see if one works over the other - if you Save it, the iTunesSetup.exe file is saved onto your computer, so look where it is saving to and open the file from there to install iTunes.
Have a good one,
David

Once i updated to firefox 4 - it simply will not open even though it says its running as a service in taskmanager - help

once i ran the new update and reboot, firefox 4 never opened, the browser screen never appeared yet when i run it it appears in my task manager as though the service is running... help

On your Mac you download the latest version through the App Store, not the iTunes Store. The iTunes Store gets you the iOS (mobile) version. The App store gets you the OS X (Mac) version. They are two separate apps.

I recently purchased an album but a few of the songs do not play even though it says they are there. How do I get these songs to play?

I bought an album on the iTunes store and 3 of the songs do not work on my iPod or in my iTunes library...How can I fix this problem?

You can retrieve your songs from the iPod using something like Senuti.
It's a program that transfers music from iPod to iTunes on a Mac.
When you've got a copy of those songs on your computer, then you can restore the iPod.

JUST UPGRADED TO FIREFOX 4 AND NOW JAVASCRIPT NOT ENABLED EVEN THOUGH IT SAYS IT IS

when I enter data on a website I get this response...previous to firefox upgrade it was ok
We have detected that your browser does not support JavaScript or it is disabled. This site requires JavaScript to be enabled to function correctly.
If you continue to use the site without JavaScript we cannot guarantee that it will work correctly.

I just had a similar problem and it reminded me of trying to install a logitech wireless mouse a while back. Nothing I could do to make it recognize the driver... until I ran across a website that told me that antivirus and firewalls might prevent it. So... AVG Free just updated itself earlier today... FF4 would only startup once after reboot, then start and show in task mgr but no window(s)... Uninstalled AVG new version. FF4 starts up every time. Reinstalled older version of AVG Free and now everything seems to be OK again. Hope this helps!

Reset password does not work even though it says it has been reset

I bought apps under a previous user ID that was subsequently changed to my mobileme ID when I joined iCloud. Now the apps purchased under the old ID can not update. I have reset the password under the old ID several times and each time get the reply that my password was successfully reset, but still can't log into my account under the old ID and can't update those apps. Help please! thanks

Or http://forums.adobe.com/thread/867968

PS CS4 wants a printer installed even though I can print some files.

I have PS CS4 on Windows 7. I can print some files but not all. On the ones that I can't print PS is telling me I need to install a printer 1st even though I can printer others. I have tried to rasterize and/or flatten the files and it still says the same thing. I have created a new preferences file, by renaming the old in my program files, and it still does the same thing. I have also printed the same photos in Microsoft Picture Viewer. So, the printer can see the file and print it. It's a Brother MFC 9460cdn. I've used the troubleshooting guide thus far and done all i thought or seemed pertinant - except.... As a newbie, I've not not figured out how to create a new file to copy the rasterized, or layers for that matter, to a new project. I can't seem to figure out size settings and duplicating. These are files that came with a business and for some reason only about half will print the other are stuck needing a printer installed...LOL
Please HELP
Thank you,

Hi timcasey-
I recommend you read this Support article on troubleshooting printing issues:
[[Firefox prints incorrectly]]
Hope that helps.

I would like to design a poster, when I place my photos on the page under the "links" "colour space" section it says the colour space is RGB not CMYK even though my document is set up as CMYK. Can/do i need to change this? i am worried it will be a pro

I would like to design a poster, when I place my photos on the page
under the "links" "colour space" section it says the colour space is RGB not CMYK even though my document is set up as CMYK. Can/do i need to change this? i am worried it will be a problem when my poster goes to the commercial printers who want CMYK

Yes, it will be a problem. Convert the images in Photoshop using the printer's color profiles or a standard CMYK profile.
Mylenium

My macbook won't let me sync music or apps as it says my computer is not authorized, even though when I clicked to authorize it it says that it already is. how do i fix this?

my macbook won't let me sync music or apps as it says my computer is not authorized, even though when I clicked to authorize it it says that it already is. can anybody tell me how i could fix this? iv already tried unarthorising the computer and re authorising it but it still doesnt seem to work

Hey CarlyR_,
Thanks for the question. I understand you are experiencing issues related to iTunes Store authorization. The following resources may help to resolve these issues:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M.

I preordered One Direction's new album Midnight Memories, but did not purchase it. It is not in my downloads or purchases even though it says it's purchased. I can't even buy it because it says purchased and will not let me click the button. Please help!

I preordered One Direction's new album Midnight Memories, but did not purchase it. It is not in my downloads or purchases even though it says it's purchased. I can't even buy it because it says purchased and will not let me click the button. Please help!

Try:
HT2519 Pre-ordered album, it says...: Apple Support Communities

In the middle of an update, it call closed. Itunes keeps saying that it's not installed, even though ive tried reinstalling multiple times. All my iphone is doing it showing the ituns symbol and a charger. How can I fix this???

In the middle of an update, it call closed. Itunes keeps saying that it's not installed, even though ive tried reinstalling multiple times. All my iphone is doing it showing the ituns symbol and a charger. How can I fix this???

Hi lepyykko,
If I understand your question, you are trying to update your iPhone, but you are seeing an error message that iTunes for Windows is not installed, is that right? The first step is to get iTunes successfully installed on your computer. Then backup the iPhone before updating the iOS software.
Are you seeing any error messages when you try to install iTunes for Windows?
If you can't install or update iTunes for Windows - Apple Support
https://support.apple.com/en-us/HT201668
Are you able to update your iPhone wirelessly?
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
https://support.apple.com/en-us/HT204204
Before you update
Back up your device to iCloud.
Update your device wirelessly
The easiest way to update your device is wirelessly, also called “over the air.” Here’s how:
Plug in your device to a power source.
Tap Settings > General > Software Update.
Tap Download and Install. Updates might download automatically while your device is connected to Wi-Fi and a power source.
Tap Install, or tap Later to install the update later. If you use a passcode, you'll need to enter it before installing the update.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-us/HT201263
I hope this information helps ....
- Judy

Canon printer not printing even though query says "printing"

Similar Messages

Maybe you are looking for