Canon Quick Menu - No icons

I use an iMac with Yosemite OSI and an MG7520 printer. notice on my MG7500 series Quick Menu that the Print as well as Device setings and maintenance toolbars have no icons; they're blank. The Scan, Web services, and Manual and device information has icons.

Hi ppile,
You can install the My Printer application from the Canon USA website to see if this will resolve the issue. Please click here to go to the Drivers and Software page for the PIXMA MG7520. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "SOFTWARE" section and click the MY PRINTER file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once you have downloaded the file, please double-click on it to install it on your Mac.
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

I installed Canon Pixma MG5520, since, always get "canon quick menu has stopped working" how do I fi

I installed Canon Pixma MG5520 on win 7, since, always get "canon quick menu has stopped working" how do I fix please?

Hi thaluza,
We can see if there are files in a folder called TWAIN_32 other than those related to the printer that may be causing a conflict with the Quick Menu. If there are, we can temporarily remove the files to see if this will resolve the issue.
To move the non-Canon Twain files from the Twain_32 folder, please follow these steps:
1. Go to Computer / My Computer and locate the C: drive, then double-click on it to open.
2. Locate the WINDOWS folder, then double-click to open it.
3. Locate the TWAIN_32 folder, then double-click to open it.
4. Inside of the TWAIN_32 folder, you will see a folder for your printer as well as a WIATWAIN.DS file. If there are other files in that folder, you will want to move them to another location, preferably your Desktop by doing the following:
4-1. Click on each of the other items in the folder other than the the WIATWAIN.DS file and the folder for your printer to select them. You will want to hold the the CTRL key on your keyboard while selecting each of the items until all of the items except for the two referenced above are selected. Please be sure to leave the WIATWAIN.DS file and folder related to your printer inside of the TWAIN_32 folder.
4-2. With all of the items you want to move selected, please go to the EDIT menu and select the CUT option.
4-3. Go to your Desktop (main window that comes up when you start Windows with all of the icons on it) and right-click your mouse in any blank area, then choose the PASTE option. The items you selected from the TWAIN_32 folder should appear on the Desktop.
5. Try to launch the Quick Menu again.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon Quick Menu Install

Hey there.
I have been trying to install the canon quick menu on my PC.
But everytime im installing i get an error saying there have been problems copying files to your system aborting install.
The thing is tho i had the quick menu and everything installed before but because of circumstance i had to uninstall some stuff an that was one of them.
Where can the fault be that i get that error? Maybe somebody has some help?
Greetings Blasje
P.S..: Sorry for my bad English im not native English speaker.

Hello blasje!
Thanks for visiting the Canon USA Forum.
We appreciate your participation, though we need to let you know that your inquiry is not supported by our team here at Canon USA.
The Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.
If you live outside the United States, please click here and select your country or region for your support needs.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.

Canon quick menu software does not recognize scanner for MG5520

Hi,
I have Canon Wireless Inkjet Photo All-In-One printer (MG5520). I have installed Canon complete software. But the quick menu does not recognize my scanner. In Preferences only Printer is listed, but for Scanner nothing is available. Could you please suggest how to get scanner as well for my device?
My OS is Windows 7.
Regards,
Sharath.

Hi sharma_swp,
Reinstalling the drivers for the printer from the Canon USA website should provide the scanning option on the Quick Menu. Please click here to go to the Drivers and Software page for the PIXMA MG5520. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED DOWNLOADS" section and click the FULL DRIVER AND SOFTWARE PACKAGE file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file has been downloaded, please double-click on it to reinstall the drivers and software on your computer, then restart your computer. If you still have difficulty with the Quick Menu showing items related to scanning, please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon Quick Menu has stopped working - Windows 8.1

I get this message after I installed a new MG7500 series all-in-one. I have uninstalled the entire Canon package twice. This is what I found in the exception handler: Log Name: Application
Source: .NET Runtime
Date: 7/27/2015 10:40:45 AM
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Dell2013
Description:
Application: CNQMMAIN.EXE
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.AccessViolationException
Stack:
at Canon.QuickMenu.ManagedWrapper.Twain.Controller.GetFirstSource(Canon.QuickMenu.ManagedWrapper.Twain.TwIdentity ByRef)
at Canon.QuickMenu.Main.InstallInformation.Driver.GetScannerDriverInfo(System.String, System.Windows.Window, System.Nullable`1<Boolean>)
at Canon.QuickMenu.Main.Scanner..ctor(System.String, System.Nullable`1<Boolean>, System.Windows.Window)
at Canon.QuickMenu.Main.Scanner.get_CurrentSetting()
at Canon.QuickMenu.Main.Device.get_CurrentSettingList()
at Canon.QuickMenu.Main.Device.CheckValidation()
at Canon.QuickMenu.Main.App.CheckValidation()
at Canon.QuickMenu.Main.App.OnStartup(System.Windows.StartupEventArgs)
at System.Windows.Application.<.ctor>b__1(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.DispatcherOperation.InvokeImpl()
at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Windows.Threading.DispatcherOperation.Invoke()
at System.Windows.Threading.Dispatcher.ProcessQueue()
at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Threading.Dispatcher.PushFrame(System.Windows.Threading.DispatcherFrame)
at System.Windows.Threading.Dispatcher.Run()
at System.Windows.Application.RunDispatcher(System.Object)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run(System.Windows.Window)
at Canon.QuickMenu.Main.App.Main()Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-07-27T17:40:45.000000000Z" />
<EventRecordID>269936</EventRecordID>
<Channel>Application</Channel>
<Computer>Dell2013</Computer>
<Security />
</System>
<EventData>
<Data>Application: CNQMMAIN.EXE
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.AccessViolationException
Stack:
at Canon.QuickMenu.ManagedWrapper.Twain.Controller.GetFirstSource(Canon.QuickMenu.ManagedWrapper.Twain.TwIdentity ByRef)
at Canon.QuickMenu.Main.InstallInformation.Driver.GetScannerDriverInfo(System.String, System.Windows.Window, System.Nullable`1<Boolean&gt
at Canon.QuickMenu.Main.Scanner..ctor(System.String, System.Nullable`1<Boolean>, System.Windows.Window)
at Canon.QuickMenu.Main.Scanner.get_CurrentSetting()
at Canon.QuickMenu.Main.Device.get_CurrentSettingList()
at Canon.QuickMenu.Main.Device.CheckValidation()
at Canon.QuickMenu.Main.App.CheckValidation()
at Canon.QuickMenu.Main.App.OnStartup(System.Windows.StartupEventArgs)
at System.Windows.Application.<.ctor>b__1(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.DispatcherOperation.InvokeImpl()
at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Windows.Threading.DispatcherOperation.Invoke()
at System.Windows.Threading.Dispatcher.ProcessQueue()
at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Threading.Dispatcher.PushFrame(System.Windows.Threading.DispatcherFrame)
at System.Windows.Threading.Dispatcher.Run()
at System.Windows.Application.RunDispatcher(System.Object)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run(System.Windows.Window)
at Canon.QuickMenu.Main.App.Main()
</Data>
</EventData>
</Event> Isn't this something past the user's level to take care of? Isn't this something that Canon should fix??

Yep, I have uninstalled the entire Canon package twice. I have added that info to my original post.

I keep getting a message saying "Canon Quick Menu has stopped working".

To be honest it has always said this since I installed the drivers for my Pixma MG3550. But as I have only done printing to date, I wasn't too bothered. Now I want to scan something and can't do it. I've been on and downloaded the latest drivers too. I'm running windows 7 64 bit. Please help.

I responded to your other post, before I noticed this!
I'm glad it's fixed.

Quick Menu Software for Canon PIXMA MX452

Whenever I click on the Quick Menu program for the subject product, I get the following error message:
Canon Quick Menu has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
I have uninstalled and reinstalled the driver and Quick Menu software several times, from both the disc provided and on-line downloads.
I have turned off my anti-virus/firewall program and also told the security program that the Canon program is a trusted application.
I am able to print/scan/copy, but not from the Quick Menu, which is more convenient.
Please help.
Solved!
Go to Solution.

Hi clarkdjensen,
There may be a third party scanner driver interfering with Quick Menu. Please try the following:
1. Click 'Start' and then 'Computer'.
2. On the left-hand pane, click the down arrow beside Local Disk (C: ).
3. Click the down arrow beside Windows to open the folder
4. Highlight the twain_32 folder.
5. The folder should have 2 folders that start with PIXMA MX452 and a file called wiatwain.ds. Any other folders or files should be dragged to the desktop.
6. Reboot the computer and try scanning again.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do I get Quick menu to recognize both my Canon printer & Canon scanner?

When I installed my printer, the settings in Quick menu for my scanner were wiped out. How do I get Quick menu to recognize both devices?

Hi DGA,
In order for scanner options for both models to show up, you must have both the MP Navigator for the LiDE 210 installed and the My Image Garden for the MG3220 installed. Please make sure you have both by going to your Start screen, then type in either MP Navigator or My Image Garden into the start screen. Once you start typing it will search your computer for those programs and will display an icon if installed.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Quick menu does not recognize my Canon scanner

I've been using my Canon 9000F scanner for a couple of months. Added an iX6520 printer today and installed all the software. The Quick Menu no longer recognizes the scanner. How do I trouble shoot this? Thanks.
System: Windows 7 x64

Hello Mike9685,
Please try disconnecting the scanner and connecting it back into the computer again. Be sure it is connected via USB cable directly to the computer instead of going through a USB hub or the like. If the issue persists, please try scanning with the MP Navigator software the scanner came bundled with, to help test the issue. If all else fails, please reply with the specific error or message that occurs when you attempt to scan.
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do I get rid of the menu bar icon on Mac OS?

The Creative Cloud menu bar icon on Mac OS is pretty much useless since I already have icons for all the apps and don't use Adobe Cloud storage. Anyone know how to get it off my menu bar? The menu bar is MY space. I ought to have control over what goes there. If every application starts dumping stuff there it will quickly become a mess. I want the option to turn this off.
Thanks!

Most videos play "inline", not full screen, on Safari on iPad. You can use a quick "reverse pinch" gesture (as if you were zooming in, but more of a quick flick than a slow zoom) on top of the video to make it full screen.

Menu bar icons slow to appear on startup

Of late, when I boot up my MBP, everything comes up quickly except the menu bar icons, which take forever to show up. After that, everything works fine. The only icons that need to load are Airport status, battery status, bluetooth, and date/time. The machine's not usable til these icons appear. They used to show up really fast. Sometimes on startup, they appear, then disappear, then reappear after about 45 seconds. This is not correct startup behavior. Anyone else experience this? It's only an annoyance, but it's driving me crazy.

kiddredd
Try deleting the com.apple.systemuiserver.plist file from the home / library / preferences folder. This will return things to the factory default.
Regards
TD

My MX-922 quick menu shows the scanner but no printer. It doesn't show up in the drop down in tools.

MX 922 quick menu shows up as scanner but not as a printer. It doesn't show up in drop down menu in tools.
So I can't print from Canon appications. Mac - Yosimite

Hi COGO,
You can try reinstalling the printer using the latest drivers from the Canon USA website to get the printer to show up in the Quick Menu. Prior to reinstalling, please close the Quick Menu and restart your Mac. Once your Mac is restarted, please click here to go to the Drivers and Software page for the PIXMA MX922. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED FOR YOU" section and click the CUPS drivers file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once you have downloaded the CUPS drivers file, please follow the steps above to also download all other items from RECOMMENDED FOR YOU and DRIVERS sections. If you plan on using the printer wirelessly, you will also want to download the Canon IJ Network Tool from the SOFTWARE section.
Once all items are downloaded, please double-click on each of the items to install them on your Mac. Please ensure that the IJ Network Tool is the last item installed. Once all items have been reinstalled, please open the Quick Menu.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to eliminate unwanted menu bar icons?

When I installed all the software for my new Canon MP640 printer-copier-scanner it put a "Canon IJ Network Scanner Selector" icon in the menu bar. It doesn't seem to do much - and I really don't want another nanometer of space taken-up by unwanted menubar icons... Does anyone know how to remove this?
Thanks!
Best regards,
Steve Schulte
Sunday 30 May 2010

OK the cmd-drag didn't work - I had tried that but appreciate the suggestion!
As to your suggestion: In Accounts I find a Login program called *Canon IJ Network Scanner* (checked to be hidden) - and it is in /Library/Printers/Canon/IJScanner/Utilities/Canon IJNetwork Scanner Selection. OK but if I remove this from the login - will it remove just the menu bar icon or will I then lose the ability to use my MP640 as a scanner?
When I open the program by double-clicking it, I get the same screen as when I choose it from the menu bar. I just don't want this menubar "icon" taking up real estate --
The HELP says this: (The icon itself does not show in this paste so I just put in underlines__- it is the image of a printer with the top opened and an arrow indicating a scan direction or something.
About Menu
Click__in the menu bar to display the menu.
Scan the images using the operation panel of the scanner
You can select or deselect this option. Select this option to receive images from the scanners selected in the settings screen. Deselect this option to not to receive images from the scanners.
Note
When Scan the images using the operation panel of the scanner is not selected, the icon appears gray (__ ).
About Canon IJ Network Scanner Selector
Displays information on Canon IJ Network Scanner Selector.
Open Settings...
Opens the settings screen.
Best regards,
Steve Schulte
Sunday 30 May 2010

Menu toolbar icons not displayed in colour when deployed on the Web

Hello!
We are developing an application using Forms6i on Windows NT.
Our problem is that menu toolbar icons are not displayed in colour when the application is deployed on the Web using lookAndFeel = generic. This is the case both when using Microsoft IE5 and Netscape 4.5. When lookAndFeel = oracle, however, the icons are displayed in colour.
The icons are stored as *.gif files in the same directory as the application *.html file. It does not help to create a virtual path /web_icons/ in the www listener and edit the parameter default.icons.iconpath in the file Registry.dat.
When running the application as client/server, the menu toolbar icons are displayed in colour as expected.
Any ideas on how to solve this problem?
Regards,
Kjell Pedersen
Nera SatCom AS
Norway
null

Hi,
I got the same problem and I didn't figure out, how to solve this problem.
But did you try to printout the form anyway? I guess you will see the icons on the printout, won't you?
Regards
Dirk

I just bought a new MacBook Pro Quick Time 7 icon but how do I get it to work? Do I need to purchase an additional update?

I just bought a new mac book pro. It has Quick time 7 icon on it but how do I make it work? I am a student and have a quick time video I need to play but the video won't play. Do I need to purchase an update on Apple?

It has a question mark inside the quick time logo everytime I click on it
If you mean you are trying to play a file and the QT icon with a quesion mark appears in the display area, then this means the play has reached a programming disjunction and doesn know what to do—i.e., the player recognizes the content but something is preventing proper playback is telling the user it has a question as to how the content is to be played. In such cases you normally have to determine what content, what file container, and which player version is involved before you can decide how to best fix the problem.

Canon Quick Menu - No icons

Similar Messages

Maybe you are looking for