Canon Rebel XS not recognized as device anymore

Hi Everyone,
I am new to the forum. I am at my wits end trying to solve this delimma, but maybe joining this forum will be something positive to come out of this whole experience.
I purchased the Rebel XS package with two standard lenses from Sams about 3-4 years ago. I own Adobe Photoshop Elements and both it and the Canon EOS uploader open when I connect via usb to my pc.
So recently, I stay up late in the very cold weather (in AL) and take some shots of Jupiter using my tripod. I saw online to take pic of Jupiter I should set camera to RAW. I did so, even tho I don't think elements 5 can handle raw images. I forgot to put my camera in a baggy and let it gradually warm up inside since it was so cold outdoors- but I've been outdoors in the cold before.
I go to upload what i think might be a pretty cool shot of Jupiter and I can't do it. Then I notice I have used up almost 100% of my harddrive. Here is where I think I may have messed up and need advice on how to fix this. To make room on my harddrive, I cut and pasted the entire My Pictures folder to an external harddrive device.
So I've since made such a mess of things, that I copied my pics and documents to various external storage. I have a pc that is capable of installing XP or Windows 7. I had been using XP bc I was a contractor who needed my software I'd purchased to work and it wouldn't run on 7. Out of work, I decided to upgrade to Windows 7. I put all the required disks that came with PC and erased my harddrive. I reinstalled the Canon Software and Photoshop Elements 5. I still can't get pc to recognize my camera. I think somewhere along the way I clicked something that made it think I wanted to go wireless. I can't figure out how to undo that. I am also suspicious that me doing that could have caused the issue this time bc I had some sort of error message that mentioned wireless. I do not recall the exact message.
My husband says we are too broke to call the GeekSquad. Boohoo. It's maddening bc I have pictures of items I wish to sell on ebay and can't do so. I also have a babybook to make. Any help would be so appreciated!!
I'm glad to have found this forum. I have other questions for later as well- after I figure out this issue.
Thanks,
Michele

No I have not yet tried a new battery other than the three that came with the camera, two of those are Chinese knockoffs. My girlfriend got the camera back from McBain camera...apparently they took it apart and said there was nothing wrong with it...go figure. They said pop the battery out and put it back in when it does it.... as all canon xs's act like that. umm no they don't becuase the second used one I bought for a girlfriend which is the same exact camera works great. Not to mentioned firmware 1.07 is supposed to fix the issues with the camera, which my camera is running. They mentioned about cold weather and the camera not operating well in cooler temps. Yes I'm aware of that, however I was using the camera at 0c which is right around that threshold ...and again my new used camera works fine. Do.you guys think it could be a bad clock battery? I've heard the camera won't boot up if there is no clock.battery...so a failing ond may cause issues as well...no?

Similar Messages

My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

Hey corky60,
I'd go ahead and give the following troubleshooting steps a shot:
1. Try the iPod troubleshooting assistant:
2. Restart the iPod Service
3. Restart the Apple Mobile Device Service
4. Empty your Temp directory and restart
5. Verify that the Apple Mobile Device USB Driver is installed
6. Change your iPod's drive letter
7. Remove and reinstall iTunes
8. Disable conflicting System Services and Startup Items
9. Update, Reconfigure, Disable, or Remove Security Software
10. Deleting damaged or incorrect registry keys
You can read more about each step in detail in this article:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
I'd start at the top and work through the steps until iTunes recognizes your iPod nano.
Take care,
David

My dvd drive not recognized in device manager,getting the yellow explanation mark.

my dvd drive not recognized in device manager,getting the yellow explanation mark. Tried uninstallingdevice drive and scanning for new hardware. scanned for updates, etc. I getting no results. The laptop is a Pavilion DV5. Thanks

Hi,
It could be that the drive has a Hardware issue, but try the following.
From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, open Device Manager, right click the DVD drive and select Uninstall. When this has completed, restart the notebook and let Windows rediscover the device and check.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How can I get my photos stored on iPad back if I do not own iOS device anymore?

Hi,
I need to get my photos stored on iPad back.
I do not own iOS device anymore.
I think I have been synced the photos with the cloud but not sure. The same with updating to iOS5. It was iPad 2.
I have installed the iCloud for Windows, but do not see the photos downloaded back to my windows notebook. Maybe I should turn on syncing somehow or it should start automatically after I run iClpud app and set photo syncing option on?
If it's not help, do you have any other ideas?
For example, could it be helpful if I try to get someones else iPad and login to app store with my account to see my old photo?
Thanks.

In iTunes I see I hade a backup in Dec'11, so I gues I had used iCloud. Any ideas why my photos are not downloading back via iCloud for Windows?

Anyone having trouble with this phone and their in car bluetooth? Calls dropping not recognizing the device. Had the car bluetooth reset at dealer. They said it is a common problem with the iPhone?

Bluetooth in car is not recognizing my device and when it does it will only stay connected about 5 minutes. Blue tooth has been reset at the dealer. They said it is very common with the iPhone? The car is a 2014 Toyota Highlander. This is very very frustrating as I have a 45 minute commute to work and do not want to have to hold my phone.... Thank you for any help.

sstaylor2001 wrote:
I have already done all of that. It still doesn't work. My husband has the same phone and a 2013 toyota and his is fine. Toyota told me it is the brand new cars and the new apple update. Need to figure something out. This phkne is useless now and I've had a iPhone for 5 years
Wow you would think the newer car is just an updated version of what your husbands has.
I wonder if your husbands car was updated to the same connect system if his would not connect?
Does your husbands phone work because he does not have the new iOS from Apple?
Can he hook to your connect system in the car?

USB is not recognizing the device and giving error 10

My PC USB is not recognizing the device (iphone) and giving error 10.. The USb is malfunctioning but ipod is getting connected easliy

Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.

My child has disabled her ipod and i have had to reinstall itunes which is not recognizing the device to enable us to restore to factory setting

My child has disabled her ipod and i have had to reinstall itunes which is not recognizing the device to allow me to restore ipod to factory setting.

Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Computer not recognizing my device

had to reset my ipod touch. Now when i plug it up to my computer the computer is not recognizing my device and syncing.

See:
iOS: Device not recognized in iTunes for Windows

Itunes does not recognized my device what will i do

itunes does not recognized my device what will i do

BigTarantula99 your link says:
If you have an iPod touch, see iOS: Device not recognized in iTunes for Windows.

HT1923 i have installed the updated itunes but it is not recognizing my devices can anyone help

i have installed updated version of itunes but it is not recognizing my devices can anyone help

Many thanks.
That suggests that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Itunes not recognizing any device

itunes not recognizing any devices - old or new

iPad not showing up in iTunes on a PC
http://www.apple.com/support/ipad/assistant/itunes/
iPad not showing up on a Mac
http://support.apple.com/kb/TS1591

My iphone is blocked and I am being told to pluig it in to itunes but the itunes it was set up with is not recognizing the device - can anyone help?

My iphone is blocked and I am being told to plug it in to itunes but the itunes it was set up with is not recognizing the device - can anyone help?

I also live in the United States so redownloading shouldn't be a problem.

[solved] Digital Camera not recognized in device-manager

My digital camera "Canon Powershot SX120 is" is not recognized by the devicemanager. I have read Digital Cameras.
$ groups
wheel storage users printadmin
The "camera"-Group isn't needed anymore and this group doesn't exist on my system.
The Powershot SX 120 has a MTP/PTP connection mode (as the manual says). But:
# mtp-detect
Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
Listing raw device(s)
No raw devices found.
gphoto succeed:
$ gphoto2 --auto-detect
Modell Port
Canon PowerShot SX120 IS usb:002,019
A gphoto --summary could be found here
There is no udev-rule for this camera. If i create one while copying a rule from a similar camera from /etc/udev/rules.d/69-libmtp.rules, and store it into /etc/udev/rules.d/69-canon.rules, the device-manager shows up. My udev-rule:
# Canon PowerShot SX120AX (PTP/MTP mode)
ATTR{idVendor}=="04a9", ATTR{idProduct}=="31e0", SYMLINK+="libmtp-%k", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"
The device-manager shows me only the option to open with a file-manager. Doing so will result in an error:
The file or folder udi=/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8/ do not exist.
With my udev-rule:
solid-hardware listen
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Listening to add/remove events:
Device Added:
udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
Without the active udev-rule, "solid-hardware listen" produces nothing, but
udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[5077.662572] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
KERNEL[5077.662655] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
UDEV [5077.681178] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
UDEV [5077.693035] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
Don't know what to do ... is a udev-rule necessary to bring up the message from device-manger? Or is the Camera not recognized as a mtp-device (the Camera has no such settings)? How could i figure it out?
With Digikam i could import Fotos, but i would do so with gwenview. I've tried to check it out with gwenview_importer:
$ gwenview_importer --udi '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
gwenview_importer: Missing required source folder argument.
(don't care about the different udi, i took this example from a former try) but i don't know, how to find out where the "source folder" is ...
Last edited by quiqueck (2014-02-26 20:10:25)

I have solved this by making an extra udev-rule for my camera. See my adventure on forum.kde.org for details

USB Device Not Recognized - USB device attached has malfunctioned & Windows does not recognize it

I have an HP Pavilion dv4 Notebook running Windows 7 Home Premium and the USB ports worked fine for an HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB Device Not Recognized" and also indicated that the device attached to the computer has malfunctioned. This prompted me to buy a new Canon digital camera. Well, a new camera did not fix the problem. Now, anything connected to either of the 2 USB ports will not be recognized by my laptop. Help! I'm at a loss to figure this out. I've tried the suggested Microsoft help below:
Suggestion 1: For the issue with USB devices, uninstall and re-install all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition.
The USB controllers represent the USB ports in Device Manager.
a. Click Start, type device manager in the Start search box and hit Enter.
b. Expand Universal Serial Bus controllers.
Note: You might have to scroll down the list to find this item.
c. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
d. Repeat the above step for each USB controller that is listed under Universal Serial Bus controllers.
e. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
f. Check the USB device to see whether it is working.
This did not correct the problem. Then from device manager, I tried updating drivers on all the USB controllers and root hubs. While some may have received downloaded software updates, it still did not correct the USB device not recognized problem after restarting the computer. I'm hoping someone knows of the fix to this situation and can pass it along to me. Thanks for reading and posting any help.
This question was solved.
View Solution.

Hey 655micha,
I'm sorry you're having an issue with a USB device. Do you get an error window that pops up? If so what does it say? Have you checked Device Manager? Is is just one device that isn't working? Has it ever worked before? Is it just one USB port in particular that isn't recognizing devices?
What model do you have? Here are the steps to find your product number. FN + ESC is the easiest way to find that information.

Monitor not recognized by Mac anymore?????

Hi
This is big and what is APPLE doing to solve this issue??
I just copy some posts from the forum to show how big this issue is, there is 8 more pages with the same problem, and i am one of them!!!!
HELP!!!! WE ARE FREAKING OUT HERE AND NEED A SOLUTION!!!
Yes, me. I have an HP w2207 who worked with my 3 y.o. old MacBook (OS 10.4.??) via the DVI-port flawlessly. Then bought a brandnew MacBook Pro with 10.6.X and the external monitor stopped being recognized. It works now that I have changed the connection to the VGA-port of the monitor (and bought yet another adapter for the MacBook Pro) but the quality is not what I'm used to.
MacBook Pro Mac OS X (10.6.1) HP w2207 external monitor
MattLTH
Posts: 15
From: Salt Lake City, UT USA
Registered: Dec 4, 2007
Re: External monitor not recognized!
Posted: Dec 1, 2009 1:29 PM in response to: cruzcj
Reply Email
Yes. I've tried 7 different Macs including a MacBook Pro with Snow Leopard (10.6.2) and my external monitor doesn't work with it either.
For me here's a recap:
Installed SL on a Mac Pro connected to a 23" Cinema via DVI and Olevia 537 via HDMI Input #1 and now that input no longer works with Mac computers.
Reinstalled 10.5.8 on the Mac Pro and HDMI #1 still didn't work, so I plugged the Mac into HDMI #2 and it worked.
Reinstalled SL on the Mac Pro connected to a 23" Cinema via DVI and Olevia 537 via HDMI Input #2 and now that input no longer works with Mac computers.
Since then, every device (PCs, DVD Players, Video Cameras, etc...) I connect to either of the HDMI inputs work fine. However, neither HDMI input works with ANY of the 7 different Macs (regardless of OS version) I've tried, except for a 10-year-old G4 running Panther or Tiger.
The monitor had previously worked with the MacPro (HDMI input #1) and a G5 (HDMI input #2) for almost 2 years.
When I plug the MacPro into any other monitor via HDMI, it works fine. Same thing with the G5.
My theory is still that the installer for Snow Leopard somehow made my monitor's HDMI inputs incompatible with Macs. I'm so frustrated that I'm ready to buy a new monitor, but since there's no guarantee that a new monitor won't be adversely affected by Snow Leopard, I'm still dubious.
Matt
MacPro, MacBook Pro, PowerMac G5 Mac OS X (10.6.2)
Stephen Darling...
Posts: 59
From: London, UK
Registered: Sep 24, 2004
Re: External monitor not recognized!
Posted: Dec 5, 2009 8:22 AM in response to: Roger Kaufmann
Reply Email
Another "me too" post...
Not sure exactly when it stopped working (since I don't use it every day) but my Viewsonic VX2455wm stopped working with my MacBook recently too. Checked with another MacBook (six months newer than my Late 2006 model) and that exhibited the same problem. Both machines have fully patched Snow Leopard installs. Both started with Tiger. Mine is regularly connected to the external monitor, the other has never been connected. I'm connecting using a DVI cable and a mini-DVI-DVI adapter.
The monitor appears to work correctly. I've checked with a Windows laptop connected on the VGA port. I want to test with another DVI-enabled machine to see whether or not its the cable.
MacBook C2D 2Ghz Mac OS X (10.6.2) iPhone
cruzcj
Posts: 4
From: California
Registered: Nov 28, 2009
Re: External monitor not recognized!
Posted: Dec 13, 2009 10:38 PM in response to: Stephen Darling...
Reply Email
My wife's 15" MBP arrived on Wednesday. Connected it tonight to her new Dell 23" ST2310 via a MiniDisplayPort to VGA and it works fine.
MacBook Pro 15" 2.8GHz Mac OS X (10.6.2)
Gaston55
Posts: 4
From: Sweden
Registered: Dec 15, 2009
Re: External monitor not recognized!
Posted: Dec 15, 2009 12:06 AM in response to: Roger Kaufmann
Reply Email
Hi Guys
I have the same problem with my new Dell 2209WAf. It worked fine before i changed from L to SL.
I didn't know what happened so i have spend hours and hours to resolve the problem.
Hours with Mac support and friends didn't change anything, i still cant make my Dell to work, or show up in preferences. I am working as a photographer and this issue is a real problem.
I just heard from Mac Support that Apple is working on it.....well, doesn't help us with the problem today.
So Apple, DO SOMETHING ABOUT THIS! NOW! this problem should NEVER showed up, this is something you should have fixed before telling all the Macers to upgrade!!!
Macbook Pro Mac OS X (10.6.2)
RWildman465
Posts: 2
From: Illinois
Registered: Dec 16, 2009
Re: External monitor not recognized!
Posted: Dec 16, 2009 1:18 PM in response to: Gaston55
Reply Email
Experiencing the same issues. However, on bit different hardware.
I'm using the XLR8 ProView USB input devices. Using these devices on a mixture of 10.5.8 and 10.6.2 systems (2 MacBooks, 2 Mac Mini and 1 iMac).
I can confirm the following:
When attempting to mirror video, or extend the desktop, using a mini-DVI to S-Video/Composite device on OSX 10.6.2 no video is sent to the mini-DVI device (inputing into the XLR8).
When attempting to mirror video, or extend the desktop, using a mini-DVI to S-Video/Composite device on OSX 10.5.8 video is sent to the mini-DVI device (inputing into the XLR8).
Let me also state, that the mini-DVI port on the Mac Mini's do work. They have been connected to 19" monitors and working without issue. Today, the mini-DVI devices were replaced with minidisplay port devices, which are use in conjunction with the mini-DVI ports.
It would appear, in my case, that the problem is that the mini-DVI port on both the MacBook and Mac Mini, running 10.6.2, as a secondary display device is not operating properly.
iMac Mac OS X (10.6.2)
Todd Camp
Posts: 2
From: Chicago
Registered: Dec 19, 2009
Re: External monitor not recognized!
Posted: Dec 23, 2009 12:41 PM in response to: RWildman465
Reply Email
Same problems here. I reloaded OS 10.4.6 which is what shipped with my MBP1,2 17" 2.16 Intel Core Duo 2GB ram and after installing that, i was able to select 1920x1080 for my external HP w2338h, DVI-VGA, never been able to connect DVI-HDMI. On SL, the max rez I was able to "use" was 1600x1200 which looked horrible. So this leads me to suspect that this must be an issue with SL.
I spoke with Apple Tech support on Sat and was no help. The only suggestion was that I take my MBP and Monitor to the Apple Store. Those of you who are fortunate enough to live in Chicago in the winter, then you know that option really isn't that feasible, it is but just a giant pain.
Early 2006 MBP 17" Mac OS X (10.6.2)
Salm0n
Posts: 1
From: Minneapolis
Registered: Dec 27, 2009
Re: External monitor not recognized!
Posted: Dec 27, 2009 9:57 AM in response to: Todd Camp
Reply Email
I have an iMac 9,1 Intel Core 2 Duo that I bought last June. It came with Leopard, but I upgraded to Snow Leopard. Currently, it's running 10.6.2. My HP w2207 Widescreen monitor works perfectly with it using the DVI port on the HP and the mini-display (not mini-DVI) port on the iMac.
However, I just bought the top-of-the-line iMac 11,1 Intel Core i5 QuadCore three days ago and it crashes nearly every time that it wakes from "sleep" when the HP w2207 is connected to it. It doesn't even recognize that the w2207 is connected to it. Additionally, when the w2207 is connected, it (a) looks terrible - very dim and very granular, and (b) causes the iMac QuadCore to operate very sluggishly. When I disconnect the HP w2207, the iMac QuadCore is lightning-fast.
Much like my older iMac, the QuadCore is running 10.6.2 and I'm using the mini-display port.
iMac 11,1 & iMac 9,1 Mac OS X (10.6.2)
Marjorie Colletta
Posts: 20
Registered: Mar 17, 2005
Re: External monitor not recognized!
Posted: Jan 6, 2010 6:07 PM in response to: Roger Kaufmann
Reply Email
This is a Me too post, I have a MacBook and NEC Multisync Monitor that worked fine before I upgraded to 10.6.2. I've tried to get it to work without any luck. I've written NEC to see if they have a solution.
MacBook 2 GHz Intel Core 2 Duo Mac OS X (10.6.2)
davej147
Posts: 12
Registered: Jun 1, 2006
Re: External monitor not recognized!
Posted: Jan 11, 2010 6:24 AM in response to: Roger Kaufmann
Reply Email
Another me too post. I have a new 17" MacBook Pro with 10.6.2 installed. Trying to connect to an HPL2245wg - sometimes it works flawlessly - other times not at all. Some mornings I spend 30 -40 minutes rebooting, unplugging and plugging the monitor, Detecting Displays, changing the Graphics Card (Energy settings) - all to no avail. Very, very frustrating Apple - please figure out what is going on with this issue....and get it fixed!
17" MacBook Pro Mac OS X (10.6.2) Very happily gave all my XP-stuff away!
Anteck
Posts: 2
From: Australia
Registered: Sep 30, 2009
Re: External monitor not recognized!
Posted: Jan 20, 2010 2:31 PM in response to: Roger Kaufmann
Reply Email
Wow, me too. Did a minor software update (apple released it) last night, got on this morning and BANG - my main 24" Dell display is NOT working.
This is ******, apple have surely f**ked up here. It's never had a hitch, ever, since i bought it 9 months ago.
We are all reporting the same thing - software update, and then no working external display...
APPLE???
Macbook Pro 2.2 15" Mac OS X (10.6.2)
Zedog
Posts: 13
Registered: Aug 10, 2006
Re: External monitor not recognized!
Posted: Jan 20, 2010 2:59 PM in response to: Roger Kaufmann
Reply Email
I seem to have found a fix for myself. I was having terrible issues with the screen blinking and flickering constantly. I tried to reset the SMC with everything unplugged and the computer would not reboot at that point on it's own which led me eventually to reinstalling SL.
Reinstalling SL is quite painless actually as it installs on top of your profile. After reinstalling I ran software update which installs the cumulative upgrades. Now I usually don't have any problems but must follow the instructions to run in clamshell mode to the letter.
After a week of running in clamshell mode I started having an issue with the dock not lining up so I put the computer to sleep, disconnected the monitor and restarted with nothing connected. After that, followed the clamshell mode instructions again and have been working fine again all week.
I've also disabled my screen-saver, and deleted the windowserver preferences as part of my debug process but not sure if that has contributed to my new found stability.
http://support.apple.com/kb/HT3131
Mac OS X (10.6.2)
pragmaik
Posts: 2
From: Duisburg
Registered: Apr 16, 2008
Re: External monitor not recognized!
Posted: Jan 21, 2010 1:08 AM in response to: Roger Kaufmann
Reply Email
Me too. I have a MacBook Pro 2,2 running the latest Snow Leopard 10.6.2. After I have installed yesterday's security patch it does not recognize external displays on the DVI port any longer. Tried it with a 23" DELL at the office and a 23" Samsung at home. Both have worked without any problems for years.
I am curious to learn how this behavior is related to security...

Gaston,
This is not the correct Feedback venue for your issue.
Please select an appropriate product from those displayed HERE and use the corresponding form to communicate to the correct department.
ali b

Canon Rebel XS not recognized as device anymore

Similar Messages

Maybe you are looking for