Canon Rebel Xti/400D Will not download Photos

I have a canon Rebel XTi/400D . Up until recently I had no Problem downloading photos from the camera onto the MacBook. I recently downloaded an update OS 10.8.3  and can no longer download the photos .

testdepth wrote:
Here is why my Canon camera died.  There was a loose piece I could hear rattling around inside the camera body so I disassembled the body in order to open the body and see what fell out.  When I opened the bottom of the body a small silver screw fell out of the body.  Apparently this happens to be a problem with this model and maybe others.  A screw from the motherboard backs itself out and rolls around inside the camera body shorting out the DC/DC power board and blowing the fuse labeled "P" on the power board. When I placed a meter across this fuse it reads infinity instead of a normal dead short.
How does a screw located inside of a camera body unscrew itself.  This is not a software issue or a failed electronics issue and this camera would still be working rihgt now if the screw had not backed out and shorted out my camera.  Canon's answer is of course that they no longer service this camera.
It sounds as though you have two options:
1)  Admit that it's time for an upgrade and take advantage of Canon's "Loyalty Program" to get a new camera at a good price. The XTi was a pretty decent camera in its day (my wife and I each had one), but more recent Rebels are far better. My wife's current camera, a T2i, is a major improvement, and there have been several new models since.
2)  Since you're obviously not a newbie, try to do the repair yourself. Look around for an XTi that still turns on, but has a cracked sensor, worn-out shutter, or other fatal flaw (such a camera should be available for a pittance), and re-use its power board. You have nothing to lose but a few hours of your time.
Bob
Boston, Massachusetts USA

Similar Messages

  • Elements 5.0 will not download photos onto our hard drive into folders, only individually.    *

    Elements 5.0 will not download photos onto our hard drive into folders, only individually. We have recently changed to Win 7.

    Sorry – I was having trouble using the forum and accidentally doubled up.  Thanks for your suggestion.  We will give it a go.

  • I have lightroom 4 and have recently bought a canon rebel t5. it will not let me open up raw files, no matter what i do. please help. thank you.

    I have lightroom 4 and have recently bought a canon rebel t5. I cannot get lightroom top open the cr2 (raw) files no matter what I do. Please help!!!

    You need to upgrade your version of Lightroom to version 5.4 or newer.
    Camera Raw plug-in | Supported cameras
    Or, download and use the free DNG Converter, which will produce files that Lr 4 can convert.

  • Iphoto will not download photos to the program but will download to the computer.  I would like to edit the photos but cannot.

    Hi,
    My iphoto program stopped downloading to the program, it will download to the computer though. I cannot edit the photos because they are not in the program. Can someone tell me what is wrong.  Thanks!

    No - I have no idea what yours concern even is
    iPhoto does not "download" to any place - it does import and the only place it imports to is the iPhoto library so this statement makes no sense at all
    My iphoto program stopped downloading to the program, it will download to the computer though.
    And it is really helpful to know what version of iPhoto you have and what version of the OS you have
    One possible off the wall guess with no information is that your have your events sorted incorrectly (fix by the view menu ==> sort events) or that your camera dates are incorrect
    LN

  • Windows 7 64 bit canon rebel xti compatibility issue

    I am having trouble to get my canon rebel xti (400D) to work under windows 7 64 bit. You see the canon camera icon in the devices and printers window with a yellow triangle indicating it's not working properly. Did anyone have the same issue and even got an answer to it?
    Thanks.

    I believe I have a solution for you and any other XTi owners who don't have the "Print/PTP" option in their menu.  I was able to get my XTi to function with Windows 7 64-bit last night.  Here is what I did:
    1) Installed the default Canon utilities disk that came with the camera (which installed without an issue, but wouldn't recognize the camera).
    2) I downloaded the updated EOS Utility version 2.6.1 for Windows Vista x64 from here:http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=314&modelid=14256
    3) I installed the default Canon utilities disk that came with the camera (which installed and opened without an issue, but wouldn't recognize the camera to download pictures).
    4) I executed the 2.6.1 EOS Utility update that I downloaded and received the following error: "Installation program of EOS Utility requires administrator priveleges" even though it was being run as an administrator.  Any compatibility options that I selected on the installation resulted in the same error.
    5) When you receive the error mentioned in the prior step, DON'T click the "OK" button.  First, navigate to the follwing path: "C:\Users\admin-user\AppData\Local\Temp\".  Inside this directory, you should see a directory named something like "CanonUPW_000".  Copy this whole directory to another location, then click "OK" on the installation program error on the screen (which removes the directory you just copied). 
    6) Open the directory that you copied in the last step and navigate to the following location: ".\CanonUPW_000\INST\INSTALL\COMMON".  You should find an "Install.exe" file in this directory.
    7) Open the properties of this "Install.exe" file, then select the "Compatibility" tab.
    8) Select the "Change settings for all users" button and select the "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3).
    9) Under the "Privilege Level" section, select the "Run this program as an administrator", then click OK twice.
    10) Execute the "Install.exe" file.  The installation should start and finish succeffully.
    11) The EOS Utility should successfully open after you execute it (following the installation).
    12) The only thing that doesn't work exactly the same as with using EOS Utility with XP.  When you plug your camera in, the program doesn't automatically open.  After opening the EOS Utility, you can connect the camera and download pictures, or utilize the software's remote control function. 
    I hope this works as well for you as it did for me.

  • I have downloaded pictures to iphoto from my Canon Rebel XTI.  I can not email or move any pictures that are vertical.  When I double click on the photo to enlarge it the screen fills with an exclamation mark.  I need to email these photos out.  HELP!

    I have downloaded pictures to iphoto from my Canon Rebel XTI.  I can not email or move any pictures that are vertical.  Also, if I double click on the photo to enlarge it, the screen flills with a big exclamation mark.  I need to email these photos out.  HELP!  Also if I do a slide show with the album, those pictures do not show up.

    This:
    if I double click on the photo to enlarge it, the screen flills with a big exclamation mark.
    is why you can't do this:
    I can not email or move any pictures that are vertical.
    It means that iPhoto can't find the photos.
    What version of iPhoto?

  • Problem Importing photos from Canon Rebel XTi -- Iphoto '08

    When I plug in USB cord to camera and MacBook, then turn on my Canon Rebel XTi, iPhoto opens up but will not read the CF card. The status light on the camera just blinks red as if it working on it but it never does show the photos in iPhoto08 and the camera doesn't show up on the sidebar either although it used to but doesn't anymore.
    I know that my CF card is ok because when I use it in my Canon Powershot S400 it works fine, and I'm able to import photos fine.
    Help please?

    Thanks, I'm fairly certain that WILL work since the card works with iPhoto in my other camera fine.
    I don't have a card reader and I'd like to figure out how to fix the problem I have with my Rebel XTi. Any suggestions on that?

  • Rebel Xsi display stopped working will not take photo

    I have had this camera for a few years.  I took it with me and left it covered in the car (hot day) and now the display will not light up and the camera will focus on an object but will not take photo.  
    Would heat cause the display to stop working?  What can be done to possibly correct this issue?

    Hello Luckclover,
    Since your EOS Rebel XSi needs service, we are glad to assist you at one of our Canon Factory Service Centers.  Through our web site linked to below, you would be able to request and set up service through Canon.
    EOS Rebel XSi.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I updated to OS X Yosemite but iPhoto will not download, is saying because it was bought by a different user or the item was refunded or cancelled. Now I cannot access ANY of my photos...

    I updated to OS X Yosemite but iPhoto will not download, is saying because it was bought by a different user or the item was refunded or cancelled. Now I cannot access ANY of my photos...how can I fix this????

    If you are logged in with the Apple ID that was used to purchase iPhoto or to set up the computer if it came preinstalled then quit iPhoto, backup your iPhoto library  and drag the iphoto application to the trash (do not empty the trash yet) and then go to the App store and install iPhoto
    If that does not resolve contact App store support - link is on the right of the App store window
    LN

  • My Photoshop Elements 9 will not download a file from new Apple photo application on iMac (installed 4-9-15)  What to do?

    What to do to correct problem?

    Duplicate, see:
    My Photoshop Elements 9 will not download a file from new Apple photo application on iMac (installed 4-9-15)  What to do?

  • PSE 8.0 WILL NOT DOWNLOAD CR FILES FROM CANON 1DMKIV

    I have intslled and reinstalled PSE8.0 and the software STILL will not download the RAW files from the Canon 1DMKIV.
    Downloads all other CR files from all my other Canon bodies fine.
    I keep getting "Corruption or File already exists" errors yet if you check Adobe CS4 RAW files are downloaded fine.
    Any hints?
    This is 2nd copy of PSE installation cds. Tech Support cannot find trouble.

    Thank You "99jon".
    That did it ...FINALLY. ATTENTION TO USERS: DO NOT "DOWNLOAD PSE8 FROM ADOBE STORE"!!!! THIS FILE IS MISSING AND PLACED IN WRONG DUAL PSE FOLDER> FOLLOW WRITTEN INSTRUCTIONS FOR PSE8. TIER 3 ADOBE SW ENGIN COULD NOT FIX!
    After checking the PSE8 Program Files I discovered that the zip file was indeed previously downloaded but for some screwed up reason Adobe has place 2 files for PSE8.
    After reading the "download text file" I found that the "exe" file was placed in the wrong file according to Adobe Download instructions.
    After placing it in the file it should be AOK!!!! TESTED OK!! Plug-IN version still shows version 5.51 but it does dwnld 1DMKIV CR2 files now.
    Submit your Pay Voucher to Adobe because they could not figure it out up to Tier 3 Software Support Engineering!!
    Many Thanks!
    Dan

  • Canon eos5 mark3 will not upload photos?

    canon eos5 mark3 will not upload photos?

    Open iPhoto, and go to: iPhoto / Preferences / General 
    Here select Connecting Camera opens iPhoto.
    With this setting iPhoto will open when you connect the camera, and show you what is on the camera. You can then select what you want to import, and whether to delete the imported pics off the camera.

  • Canon Rebel XTI question

    After using a digital point and shoot for the last 5+ years, I have finally entered the DSLR world. I just purchased a Canon Rebel XTI last week. I haven't attempted to upload any pictures to iPhoto yet. Do I need to install any of Canon's software before I upload the pictures or will it work automatically?

    jsanders6,
    My wife has a Canon XTi (and Macbook) and there was no need to download the Canon software.
    I have a Canon D20 (and Macbook Pro) and it too loads directly into iPhoto with no difficulty.
    Apple has a listing of "compatible" digital cameras,but even some cameras not listed may load without difficulty.
    I would not load the Canon software,especially if you plan on using iPhoto to manage your library of photos.
    Good luck,
    Scott

  • Nikon D80, Digital Rebel XTi / 400D / Kiss X ... RAW support Here

    Digital Camera RAW Support Update
    PPC : http://www.apple.com/support/downloads/digitalcamerarawsupportupdateppc.html
    Universal: http://www.apple.com/support/downloads/digitalcamerarawsupportupdateuniversal.ht ml
    " About this update
    Mac OS X Tiger provides support for a variety of popular digital camera and image file formats. Applications such as Aperture, iPhoto and Preview utilize this support to work with digital camera RAW files. This update improves RAW file format compatibility for the following digital SLR cameras:
    -Canon Digital Rebel XTi / 400D / Kiss X Digital
    -Nikon D80
    -Pentax *ist DS
    Other issues addressed:
    -Handling of large Canon RAW files (.CRW)
    -DNG compatibility on Intel-based Macs
    -Lines sometimes appearing in images exported from Aperture"
    -Robert

    Wow. I just installed the universal version of this update and now my iMac won't boot. How swell... It sits at the white screen.
    I can hold down the power button and turn it off and on, but that's it. I've tried booting from CD by holding down C and zapping the PRAM and it still just sits at that white screen. I've unplugged it and am going to leave it for about 15 minutes and see if that does it.
    Has anyone else had this problem?

  • Images from Canon 7D mark 2 will not open in Photoshop CS6

    Images from Canon 7D mark 2 will not open in Photoshop CS6

    Hi Ferdinand12345,
    Cannon 7D mark II has been included in the ACR 8.7. I would advise you to wait for the 8.7 camera raw to release.
    In the meanwhile you can go to labs.adobe.com and download the 8.7 DNG converter and convert the files to DNG and then try to import.
    Thanks

Maybe you are looking for

  • Sharing Photos

    Is it possible to share an album to selected people over the internet? In other words, make an album of my son, share it with my mom so this new album shows up in her iPhoto to view. I know I can post it online in several ways, but it would be cool t

  • My Ipod mini shows "locked" on the ITunes screen

    When connecting my Ipod mini to the computer I see in ITunes a " locked" sign. I can only add new music (still some disk space on Ipod); it does not delete old songs that I have deleted in ITunes. My Ipod mini is not set to act as external hard disk

  • How to build search field/results page DW 8?

    Wondering how to add a search field/form using DW 8? What are the steps, is it easy in DW 8 or are there better, more efficient scripts out there? Been looking through the DW help - how can I add the search field to the upper right portion over the c

  • F.05 tagged to wrong tax code

    Hi Gurus, While running F.05, system posted tax code in one of the balance sheet acct is wrong. We're expecting the system to post tax code for revaluation on ac 5304xxxx as G8 or S8 . Pls advise where to make the changes? Regards CL

  • Convert .mov to .flv

    Can QuickTime Pro convert a .mov file to .flv? If not, can you recommend a program (hopefully an Apple one) that can do this successfully. I have tried a bunch of them, Reva, Wondershare, etc. and have been disappointed in the translation. Thanks, Do