Canon S-100 forgets date and time each time it's turned off.

Hello, I have a canon S-100 that forgets the date and time each time it's turned off. I see chat rooms that talk about if the internal battery is shot. The S-100 will loose date/time if the battery is removed. My S-100 asks for date/time every time I turn it on without touching the battery. Has anyone come across this issue?

The S100 has a built in rechargable battery that runs out after a few weeks of non use and no battery inserted. You can also set it to automatically update via GPS as shown on page 115. I attached a portion of page 21 from the user manual to explain it better.

Similar Messages

Nokia N95 asks to reset date and time each time i ...

My N95 has started to request the date and time each time I swaitch it on. The battery is charged up . How do I stop this
Thanks

There is another smaller auxilliary battery in the phone. This battery is faulty on your phone. You need to have it replaced at your local Nokia Care Point.

HT3231 I have completed migration, is it possible to merge the two account now? or a short cut to share information? I don't want to log in and out each time I want to see my old data.

I have completed migration, is it possible to merge the two account now? or a short cut to share information? I don't want to log in and out each time I want to see my old data.

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

C6-00 forgets date and time every time it is turne...

A new annoyance has arisen with my C6.
A few weeks ago, just as I left on a 3-week trip across different timezones and countries, the phone starts forgetting the date and time everytime it is turned off. And I needed to turn it off when boarding planes!
What a pain in the backside when it stupidly asks for the date and time everytime it is turned on!
This problem was not there before. And then one day it started occuring. No changes the software.
Recently I updated the firmware to the latest one. No difference.
I turned on the Update Time Automatically setitng but that seem to do absolutely nothing. And everytime I changed timezones this setting is forcibly turned off anyway. The problem started occuring before I started moving between timezones.
Any suggestions? This post on a similar problem with the N95 [/t5/Nseries-and-S60-Smartphones/N95-8GB-forgets-date-and-time-every-time-it-is-turned-off/m-p/536562...] seem to say - live with it or bring it back to Nokia.
Dear Nokia - re you seriously telling me this so-called smartphone cannot actually keep time?!!! That would be an unacceptable situation. Nonetheless, I look forward to a potential fix. Maybe it would be as simple as setting some soft swith in some hidden settings mode...
Thanks!!!

This is usually a symptom of a faulty auxilliary battery. It used to be quite common with the older phones. If it keeps happening it may be worth your while getting it replaced under warranty. The auxilliary in a small battery inside the phone and can only be replaced by a Nokia Care POint.

I need an app or software that records the date/time each time a write something and press enter. This needs to be quick so I can continue writing right after I press enter, and the date/time is inserted for each word. Does this sort of software exist?

I need an app or software that records the date/time each time a write something and press enter. This needs to be quick so I can continue writing right after I press enter, and the date/time is inserted for each word. Imagine a spreadsheet - each time a write something in a cell and press enter to go into the next cell, I need the app/software to automatically insert the corresponding dat and time. Does this sort of software exist?

No one here is going to do anything about it. Send feedback to Apple.
http://www.apple.com/feedback/ipad.html
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

HOW DO I STOP MY JSP PAGE FROM INSERTING DATA IN DATABASE EACH TIME REFRESH

Hi,
HOW DO I STOP MY JSP PAGE FROM INSERTING DATA IN DATABASE EACH TIME REFRESH?
Thanks

emekaco wrote:
Hi,
HOW DO I STOP MY JSP PAGE FROM INSERTING DATA IN DATABASE EACH TIME REFRESH?
ThanksSTOP SHOUTING!
now, while displaying the form generate some random number, or take the current time in millis or whatever. Put that number in a hidden field. Insert that unique number along with the real data into the database, but before you do check if the number already exists. If it does you can be pretty sure this is a resubmit of the same data, so don't allow it. This is one way of many to prevent resubmission of existing data.
A good way to prevent a refresh from resubmitting altogether is to do a redirect to a result page right after you deal with the POST request. When the user presses refresh then, he/she will refresh the redirect and not the form submit.

After changing my 1st cartridge Envy 5530 printer wants to realign and scan each time it's turned on

After changing my 1st cartridge Envy 5530 printer wants to realign and scan each time it's turned on. When I do this, it says "Scan not detcted." After a 2nd scan, it sets itself to default settings. Then I can use the printer. Is there a way to turn off alignment?
This question was solved.
View Solution.

You might try resetting the printer. It could clear your issue.
Steps
Press the Power button () to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button () to turn it on.
Hope that this helps.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error.

Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error and the phone switches off. Please help.

Same thing happened with my iPhone 4S - no one is any help. Thanks Apple for such a crappy update! I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone. Sheesh! If someone has a solution to this it would be greatly appreciated.

To eliminate date and extract only time component

hi i am getting an input from a table which is of varchar2 type and the field has data like
8:00 am-8:00 pm
now i want to insert 8:00 am as start_time and 8:00 pm as end time in the columns start_time and end_time in another table.the 2 columns are of date type.
HOW do i remove the date and just insert time in these columns
because if i do
insert into..
to_date(substr(peak_time,1,7),'hh:mi am') ......
then along with time current date gets appended.

to be honest? If that was the requirement (eg. scheduling items to run between two times), I'd store it as numbers - probably as minutes. - eg. 8 hours = 8*60 minutes
Then I'd do something like:
select my_date + start_time_in_mins/1440 from my_table

I want to bulk purchase single tracks, how do i go about this without buying and paying each time

I want to bulk purchase single tracks for my ipod, how do i go about this without buying and paying each time, can i not amass a number of tracks and then go to checkout. It seems to want to charge me each time. Help!

Put them in your wishlist

Trying to change the APN on my iPad for a new data provider. Each time it returns to the original. Any suggestions?

trying to change the APN on my iPad for a new data provider. Each time it returns to the original. Any suggestions?

Hi Canberabomber,
If you are having issues setting or changing the APN on your iPad, you may find the following article helpful (apologies if you have already seen it):
iOS: About cellular data network settings (viewing or editing the APN)
http://support.apple.com/kb/ht2283
Regards,
- Brenden

Have my MacBook Pro plugged into a monitor and also using a wireless keyboard. I want to close the macBook but every time I do the monitor turns off - is there a way to avoid this?

Have my MacBook Pro plugged into a monitor and also using a wireless keyboard. I want to close the MacBook but every time I do the monitor turns off - is there a way to avoid this?

Press any key on the wireless keyboard after you close the MBP and it goes to sleep. The computer will wake up with the external monitor as its display. This is called Clamshell mode.
http://support.apple.com/kb/HT3131

How do I download the previos software iOS 6? I have the iOS 7 and my iPhone 5S gold keeps turning off all the time!

How do I download the previos software iOS 6? I have the iOS 7 and my iPhone 5S gold keeps turning off all the time!

Sorry, downgrading isn't supported by Apple.
what troubleshootings steps have you done to try to resolve your issue?

HT1695 Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-f

Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-fi) !!!

cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.30 GHz
available frequency steps: 2.30 GHz, 2.30 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 1000 MHz, 800 MHz
available cpufreq governors: conservative, powersave, ondemand, performance
current policy: frequency should be within 800 MHz and 2.30 GHz.
The governor "conservative" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
cpufreq stats: 2.30 GHz:0,02%, 2.30 GHz:0,05%, 1.80 GHz:0,05%, 1.60 GHz:0,03%, 1.40 GHz:0,01%, 1.20 GHz:0,16%, 1000 MHz:0,38%, 800 MHz:99,29% (1017)
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
Thax

I tried to soft reset my ipod touch with the top button and the screen button. it turned off and went to the blue screen with the apple. now it won't do anything-it has stayed on that scren for 4 hours now. does anyone know how i can fix this?

i tried to soft reset my ipod touch with the top button and the screen button. it turned off and then went to the blue screen with the apple like it should. however, it now just stays on that screen. it has a sort of clock looking thing at the bottom of the apple that does not move either. it has stayed on this screen for over 4 hours. i also can not hard reset it in itunes. i am not really goood at this sort of thing. does anyone have this problem or a possible solution? thanks

See Here for
Frozen or unresponsive iPod touch
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Try this First... You will Not Lose Any Data...
Turn the iPod Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Canon S-100 forgets date and time each time it's turned off.

Similar Messages

Maybe you are looking for