Canon's Data Import Utility C100

Does anyone know where to download C100 Data Import Utility for C100? I just bought a used c100 that did not come with the disc and hoping to find out how to order a new one or if there is a download somewhere. Anybody out there think this is a must or can bypass with something like clipwrapper?

So I found a simple work around. I was having dificualty only downloading the VIDEO files, with no AUDIO becuase they are stored in 2 separt folders when recorded to the SD card from the c100. All you need to do is
sd > card reader > computer > [open folder via my computer]
EOS CANON C100 > PRIVATE > AVCHD > BDMV > STREAM (video files)
> CLIPINF (enables audio files to be interpreted in NLE's)
****STREAM (contains video file copy them to a new folder on your hard drive. Then the tricky part, also open the folder CLIPINF this folder holds files with the extension .CPI select all those and copy into the same folder you created for the video files. Then simply import the video files into a NLE's such as Premier Pro then your good to go!
Took me about an hour of frustration then I went back and just opened all the folders. Trial and error = Knowledge!
Enjoy hope this helps

Similar Messages

C100 Data Import Utility - download where?

Hi there!
I lost the DVD that came with my C100. Can I download the Data Import Utility somewhere? I can't seem to find it anywhere on Canon's pages...

Hi o-shows!
Thanks for posting.
The Data Import Utility is licensed software provided by the Pixela Corporation. They have it available on their website for download. Clicking HERE will take you to the download page. There is a download link at the bottom of the page you can click after reading over the instructions.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Syntax for datapump import utility (If data exists ignore table.)

I am trying to import 2 DMP files of the same schema with different data in the tables. The first one has half the tables filled with data from one subject area and the other dmp files has data from another subject area. Is there a syntax in the import utility which if data exists in a table ignore or skip it?
Thanks in advance.

Hello,
Is there a syntax in the import utility which if data exists in a table ignore or skip it?You have the Parameter TABLE_EXISTS_ACTION = SKIP :
http://download.oracle.com/docs/cd/E11882_01/server.112/e16536/dp_import.htm#SUTIL936
But it let the Table as is. If a Table is empty it will stay empty.
Hope this help.
Best regards,
Jean-Valentin

Data import from EBS failed via FDMEE in fdm . Getting error message as "Error connecting to AIF URL.

FDM Data import from EBS failed via FDMEE after roll back the 11.1.2.3.500 patch . Getting below error message in ERPI Adapter log.
*** clsGetFinData.fExecuteDataRule @ 2/18/2015 5:36:17 AM ***
PeriodKey = 5/31/2013 12:00:00 AM
PriorPeriodKey = 4/30/2013 12:00:00 AM
Rule Name = 6001
Execution Mode = FULLREFRESH
System.Runtime.InteropServices.COMException (0x80040209): Error connecting to AIF URL.
at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
Any help Please?
Thanks

Hi
Getting this error in ErpiIntergrator0.log . ODI session ID were not generated in ODI / FDMEE. If I import from FDMEE its importing data from EBS.
<[ServletContext@809342788[app:AIF module:aif path:/aif spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
java.lang.RuntimeException
at com.hyperion.aif.servlet.FDMRuleServlet.doPost(FDMRuleServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Problems with VLM Import Utility

Hello!
We I are using NI Volume License Manager 3.0 together with NI Volume License Manager Import Utility for importing users data.
The problem is that we can't import .xml data into VLM when the user types his name into Full Name field and his name contains characters like ČŠĆŽĐ čšćžđ. These characters are not correctly written into .xml file with VLM Import Utility and we have to manually replace them with Microsoft Expression Web before we can load .xml file into VLM server.
Do you have better solution? Is there some new version of NI Volume License Manager Import Utility that correctly handles non English characters?
Thank you
Bojan Gergič
Solved!
Go to Solution.

Hi
Sorry for not having a god news. This issue is a known bug (You can refere to it by a number CAR - Corrective Action Request - #320545). Unfortunatelly, I have no knowledge about a workaround for this.
Regards
Barbara

Canon IJ Network Scanning Utility not showing up in Menu bar

Hi, I recently performed an erase and install of my Mac. I then used Migration Assistant to restore my data. I have a Canon MP620 Wireless Printer. I noticed that the Canon IJ Network Scanning Utility is not showing up in the menu bar. How do I get it to show up again?
Message was edited by: Stuart Lawrence

When installed, the Canon IJ Network Scan Utility is located HD > Library > Printers > Canon > BJPrinters > Utilities. Double click the utility and the icon will appear on the menubar. If you want the utility to start on login, then you can add it to your Login items, located in System Preferences > Accounts.

Import Utility Without Duplication

I planning to export one Schema from an Oracle database (let say DB1) and I want to import it into another Oracle database (let say DB2). However, DB2 already has the exported Schema along with its contents (Tables and its data/records), but the data/records in the Tables is/are old. Therefore I want to import the data from DB1 into DB2 while ensuring that there will be no duplication in DB2, is that possible?
The reason for that because the mentioned Schema contains more than 1000 tables and it will be a hassle for me clearing all corresponding tables in DB2 before using the import utility.
I am running Oracle 9i R2 on Windows 2000 Server for both DBs.

If data already exists at the target database, or at least the empty table, when you attempt to import to it you will receive duplicate rows since you must issue the import command with the IGNORE=Y clause.
You should clear all 1000 tables prior to performing the import, this is not a big deal, you don't have to manually do it, you can create a sql script out of sql to perform the truncate table command prior to performing the import.
One more option you have is to export with the query clause, if it is possible to find a key that let you find the subset of new rows at the source database, such as a primary key or an insert date column.
If you have primary keys on all target tables, then you can issue the import with the IGNORE=Y option, there will be plenty of errors at the time you perform the import, but these errors can be ignored as long as they refer to duplicated rows rejected by the primary key enforcement.
Another option is to evaluate using the merge command through db links.
~ Madrid

Doubt on import utility

I want to export data from 10g release 2 database and import it into the 11g database . The database structure varies ie most of the schemas thati need to import are new ones which dont exist in the 11g database.
When I do a full database export from 10g db and then do a full database import into 11g db using datapump import I face many errors like
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'SH' does not exist
Failing sql is:
GRANT WRITE ON DIRECTORY "LOG_FILE_DIR" TO "SH"So should I create the users in the target db before running the import since there are hundereds of new users and creating users will be a hectic job or did i commit any mistake in running the import utility ?

Hi,
>>So should I create the users in the target db before running the import since there are hundereds of new users and creating users will be a hectic job or did i commit any mistake in running the import utility ?
I don't think so. Is there some problem in ran this command after the import operation?
GRANT WRITE ON DIRECTORY "LOG_FILE_DIR" TO "SH"Cheers
Legatti

Problem with the Export/Import Utility when importing a .portal file

Hi there !
I got the following error when trying to import a .portal file to a desktop by using the Export/Import Utility.
<13-11-2009 12:13:26 PM CLST> <Error> <netuix> <BEA-423487> <Import: did not add navigable [2203] as it would cause an illegal dependency.>
The error is shown several times, starting from the number [2203] until [2285].
It causes that i can't see some pages of my portal... it's like they dont exist.
I Hope you can help me fix it, because i have not found any information about it.
Best regards
P.D.: I am using the BEA Weblogic 10.0.1 version.
Edited by: user12231353 on 16-nov-2009 12:38

I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from scratch to the best of my ability. Here is a complete rundown of my settings:
I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice.

Data import/update on Custom Objects

Hi,
We are using the Custom Object1 for capturing site data within an opportunity. Since the custom object does not have capability to check for duplicates, the users have now entered data into this object which have lot of duplicates and also the data quality and integrity is lost. I am trying to see if there is an option to export this data and reimport them back after cleansing the data.
I then realised while importing custom objects, the only available option is to use external id.All the site that have been entered by the users do not have any external unique id. Also there is no option to do a mass delete records within the custom object1.
I understand that the only option to cleanse and reimport them back into ondemand is using web services. I want to use web services as last option.
Is there any other option to reimport them back into ondemand using the import utility after cleansing the data.
I would like to know what is the best practice while using custom objects. Is it advisable to populate a default value in the external unique id for custom objects while creating new records. If i had populated some value in the external unique ids while creating those records, i would have had the option to update the existing records. Now i don't even that option.
I am looking for some suggestions for this issue.
Thanks
Swami

Bobb,
I exported the data and mapped the row id to the external unique id. Like i said before, the external id is blank in crm ondemand when it is created. We did not have any default value specified for the external unique id.
When i tried to import with overwrite option, it does not find a match.
I get the following error message as i expected.
Row Id: AEMA-EYGFE     No matching record has been found. The import process will ignore this record.
Row Id: AEMA-F8CPC     No matching record has been found. The import process will ignore this record.
Row Id: AEMA-12CLIA     No matching record has been found. The import process will ignore this record.
Unless i do a web service update of External Unique ID in crm ondemand, the import option will not work.
Thanks
Swami

Statistic on throughput of data loader utility

Hi All
Can you guys share some statistics on throughput of data loader utility ? If you are looking for number of records you may consider 1 Million, how long it would take to import this ?.
I need these number to make a call on using Web Service or Data loader utility. Any suggestion is appreciated.
Thank you.

It really depends on the object and the amount of data in there (both the number of fields you are mapping, and how much data is in the table).
For example…
One of my clients has over 1.2M Accounts. It takes about 3 hours (multi-tenant) to INSERT 28k new customers. But when we were first doing it, it was sub-1hour. Because the bulk loader is limited on the record count (most objects are limited to 30k records in the input file), you will need to break up your file accordingly.
But strangely, the “Financial Account” object (not normally exposed in the standard CRMOD), we can insert 30k records in about 30 min (and there are over 1M rows in that table). Part of this is probably due to the number of fields on the account and the address itself (remember it is a separate table in the underlying DB, even though it looks like there are two address sets of fields on the account).
The bulk loader and the wizard are roughly the same. However, the command line approach doesn’t allow for simultaneously INSERT/UPDATE (there are little tricks around this; depends how you might prepare the extract files from your other system... UPDATE file and a INSERT file, some systems aren't able to extract this due to the way they are built).
Some objects you should be very careful with because the way the indexes are built. For example, ASSET and CONTACT both will create duplicates even when you have an “External Unique Id”. For those, we use web services. You aren’t limited to a file size there. I think (same client) we have over 800k ASSETS and 1.5M CONTACTS.
The ASSET load (via webservice which does both INSERT and UPDATE) typically can insert about 40k records in about 6 hours.
The CONTACT load (via webservice which does both INSERT and UPDATE) typically can insert about 40k records in about 10 hours.
Your best shot is to do some timings via the import wizard and do a little linear time increase as you increase the data size sitting in the tables.
My company (Hitachi Consulting) can help build these things (both automated bulk loaders and web services) if you are interested due to limited resource bandwidth or other factors.

Using the Import utility from other users and going to a different schema

I has a user today with rights
Insert into XXXX.TABLE values(); Works just fine for another schema's table which has select,insert,update,delete.
We tried to utiile the import utility from OTHER USERS
Insert failed ORA-00942
Do you want ot ignore all errors
Even though we have rights to the schema under OTHER USERS.
When connected as the owner it works fine.

I've be trying to find a work-around to this issue & found this old post -- I'm having the same problem.
I'm using Oracle 11g and SD 2.1.1.64.
I have user A with a table that grants select,insert,update, and delete privs to user B. Logging into user B I, of course, can do inserts, deletes, etc. on the the table in user A's schema.
When I use the import data feature to load data from a CSV file I can't get it to work while logged into user B. It does work fine if logged into user A. It looks like the issue may be that it doesn't put the schema prefix of "A." on the insert statements.
Has anyone found a way to get around this issue yet?

HT201071 why my canon 7d & 70D imported photo all not in RAW format? All in JPEG? Please settle it for me. thank you

why my canon 7d & 70D imported photo all not in RAW format? All in JPEG? Please settle it for me. thank you

You should take a look at iView Media or its Pro version. It is a cross-platform (Mac and Windows) program that is free of some of the stultifying limitations of iPhoto. For example, you can create multiple catalogs and you can easily catalog media (not just photos) that are not on the current disk, like media stored on CDs. It has very flexible cataloging features.
If they have not changed their licensing, you can buy one license to run both the Mac and PC version for one price. You can make one catalog and easily pass it between a Mac and PC with no translation or confusion. This would be much easier than trying to make it work with iPhoto and some other Windows program.
If you were to go the iView route, you would have to "sync" the data back to the photos so that they carry your keyword etc. data with them to other apps. I don't know if iPhoto embeds that info back to the photos, or if it stays in the iPhoto database only.
Photoshop Elements 4 is great on Windows, but the Mac version of Elements does not include the cataloging feature because it integrates with iPhoto. I'm not sure how smooth that all works.

Move our Existing Database 8.1.7.3 into 10gR2 through Export Import Utility

Hi,
I want to move our Existing Database 8.1.7.3 into 10gR2 through Export Import Utility in Oracle EBS (FINANCILA) environment.
My Current Setup:
OS: SUN SPARC 8
ORACLE APPS: 11.5.7
DB Version: 8.1.7.3
My New Setup:
OS: SUN SPARC 10
ORACLE APPS: R12
DB Version: 10gR2
I have successfully created Upgraded file R12 file system and installed R12 tech stack.
Now we want to move data from Current to New Setup by using Export/Import utility.
Please suggest me steps or meta link note .
Thanks
Anup

What shoul be better for my case:
Upgrade Paths :
E-Business Suite Releases Available Paths
11.5.8 with 9.2.0.x database Path A
11.5.9 (base or CU1) with 9.2.0.x or 10.1.0.x database Path A
11.5.9 CU2 with 9.2.0.x or 10.1.0.x database Path A or Path C
11.5.9 CU2 with 10.2.0.2 database Path D
11.5.9 CU2 with 10.2.0.3 database Path E
11.5.9 CU2 with 10.2.0.4 database Path B
11.5.10 (base or CU1) with 9.2.0.x or 10.1.0.x database Path A
11.5.10.2 with 9.2.0.x or 10.1.0.x database Path A or Path C
11.5.10.2 with 10.2.0.2 database Path D
11.5.10.2 with 10.2.0.3 database Path E
11.5.10.2 with 10.2.0.4 database Path B
Regards
Anup

Export/import utility from within apex

Hi Friends,
With my knowledge in oracle forms the export/import utility can be called from within a form in runtime
using a push button.But how can i achieve this using a similar button in the oracle apex.
Pls give me a helping hand.Thanks.
regards,
kehinde

Hello:
The Oracle Data Pump utility is now the preferred tool to use to import and export data and metadata from an Oracle database. Oracle Data Pump provides capabilities that far exceed those provided by the older imp/exp programs. Further, in addition to command line invocation of the tool, Oracle Data Pump has a set of pl/sql APIs (DBMS_DATAPUMP) that will let you do import and exports from pl/sql. You can therefore easily set up an APEX page that will accept a bunch of parameters and execute the appropriate procedures within DBMS_DATAPUMP to do the export/import.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_api.htm#i1008009
Varad

Canon's Data Import Utility C100

Similar Messages

Maybe you are looking for