Canon Scanner CanoScan 8000F

Help please.
I have upgraded to OS 10.9 Mavericks and can not find a download to run my CanoScan 8000F scanner.
Any suggestions?
(This is not a 8800F & I understand that that driver will not work.)
Thanks for help.
Nic

I think you are not going to be able to use this scanner on 10.9. The last TWAIN driver that Canon made was for Tiger (10.4) and there is no ICA driver so you cannot use Image Capture. Also, Vuescan which is often a workaround for many scanners, does not support this scanner from Lion onwards.

Similar Messages

Canon scanner (Canoscan 8600F series) will not work after OS upgrade.

I used the scanner when when it was 10.6 just fine and 10.7 but as soon as I upgraded it to 10.8, it wouldn't. Officially the website supports up to 10.6. I don't know how it worked on 10.7. Now, it doesn't even recognize the scanner.
One thing was I did wipe out the drive and re-install the OS because OS upgrades would perform better. Trying to re-installing the older drivers don't help.

First, Canon (and a few other printer and scanner) drivers are distributed via Apple's software updates.
Then, 10.8.2 requires many if not most apps and drivers to be updated. If you just upgraded to 10.8.2, the newest drivers should be included, otherwise they should show up once you run Software Update.
Alternatively, you can check http://support.apple.com/downloads/ for the latest and greatest.
However, it appears that your scanner is not (yet?) supported in 10.8.2. Check here and follow the link there: http://support.apple.com/kb/HT3669#canon - your scanner is not listed.
Note that it's Canon's job to provide the drivers, Apple only helps distributing them. So, you may want to contact Canon and ask them, then sit and wait... sorry...

Photoshop CS3 wont recognise my Canon scanner

Hi
Updated to CS3 and my canon scanner wont get recognised. I have a Power PC G5 Mac and did a forum search but everything seems to be about intel macs.
Can someone please help me?
Cheers
Stag

Yes i did all that. I found this and followed:
"1. Use the "Deldrv" program to remove previously unsuccessfully installed driver(s). The "Deldrv" uninstaller can be found on the Canon website at the bottom of the Canon scanner driver pop up window that you access to get the drivers for your scanner.
2. Use the "Find?" under the File menu (command-F) or use Spotlight (command spacebar) to find the folder "CFMSupport". Select this folder (don't open it), and use the 'Get info' command in the File menu (command-I) to open information about the Ownership and Permissions of the folder. Click on the arrow beside 'Ownership and Permissions' so it points downwards, then click on the arrow beside 'Details' so you can see the details. Click on the padlock icon so it is unlocked. Then set owner to your user name, set the Group to admin, and set access for all users to Read & Write.
3. Reinstall the CanoScan Toolbox first, then the scanner drivers from the Canon website or your CD, restart your computer."
Im gonna call Canon. If nothing, apart from vuescan, any free applications I can download?

Using a Canon Scanner in Panther

I made the System 9 to 10.3 upgrade this weekend and have almost everything up and working or figured out.
My Canoscan N650U is still a mystery. I downloaded the drivers from Canon and ran the installer. I had expected that the scanner would show up in "Image Capture". Alas it tells me I have no input device installed (although I am on the scanner tab in Image Capture). I did run teh repair permissions utility, but nothing changed.
System profiler shows the presence of a Canon scanner on the USB.
How do I get the scanner to scan?
I think I can still run the Canon toolkit in Classic, but I was expecting to be able to work with the scanner in 10.
Any help welcomed

To add a little more to John's responce.
I have found that If your Scanner worked with 9 That most times all of the utilitys and Insallation and setup for OS9 do not transfer to 10, unless the Installer places a Set-up and Utility folder in OSX.
Many times, and bear in mind each Scanner can be a little different. You can do a couple of different things, You can either go to the Scanner Manufactures site and search for the Insallation and set-up for OSX and when it downloads the folder or folders you have to manually drag and drop them to the Applications folder, then open that folder and then double click to open them in OSX.
Remember Applications...NOT OS9 Applications.
This will sometimes do it, more often than not.
The other way is to close OS9 and try to use the Insallation CD and see if it will download to OSX, some will some won't. This should give you some Idea's
Oh one other thing some Scanners only offer software for OS9 on there Install cd's and you may have to look for 3rd party software for your scanner.... Don

Canon Scanner 9950f

Hi, Just moved to macbook pro 2011 10.6 version (from pc world) and unable to
use canon scanner 9950f--i can see the toolbox but when i hit scan i get no
driver message---checked canon and no driver available--has anyone been
able to use this scanner in snow leopard macbook pro
thanks, sandy

OK, I see that Canon does not support Lion. I bought a CanoScan 9950 and want to have it recognized and run VueScan. So far I cannot get the scanner recognized in About the Mac nor in VueScan. I downloaded drivers from Canon but it seems from the conversation they don't work with Lion. So what is a boy supposed to do? Is there a way to get the scanner recognized and run with VueScan or am I just SOL? Surely there has to be a fix.
In addition I have a Canoscan FS2710 which I have not been able to use for ages.

Need to get Canon Scanner Lide210 to be in scanner list in PSE10 for Mac

I have just upgraded from PSE9-Mac to PSE10-Mac on MacOS 10.7.2. I have a CanoScan Lide210 and have enjoyed using the import feature in PSE9 and my Canon scanner for importing images. I recall it being a process for the scanner to be placed in the list when installing PSE9, but can't seem to find where this process occurs. I despise using the clunky scanning interface from Canon, and have really enjoyed the feature in PSE9. I upgraded because I was having some lock-up issues during import and figured a newer version might help. Thanks!

Thanks..I have copied over and posted where you led me. I just spent a lot of time with Nidhaal from Chat at Adobe and he was unable to help. Though I can now see my scanner in the drop-down list, it will not open a preview or scan window in PSE10. He has recommended using PhotoBooth or other scanning interfaces to capture, then import and edit within PSE10. I am frustrated by the extra, clumsy steps to do something I have been doing for thousands of photos over the past couple of years. I, at least, want to create a process that is reasonably tried-and-true from other MacOS/PSE users. I appreciate the direction you've given me.

Scanner (Canoscan) Software Suddenly Stopped Working!

Hi all. I was wondering if anyone has come across scanner software ceasing to work before? I've been using a Canon Canoscan 8400f Scanner for years with little or no problems and suddenly in the the last few days it's stopped talking to my Mac. I have an iMac G5 PPC running 10.4.11, and as it has been running so well I know little about its inner workings. I've tried everything I could find on the web - re-installs, software and driver updates, permissions repair, nothing gets it talking to the computer. The only thing I have managed to glean is that it appears to be a software problem from the computer end - does the same whether I try to access it from buttons on the scanner or software on the mac. It runs Scangear CS and Canonscan Toolbox both of which I have updated, re-installed etc to no avail. The Canonscan Toolbox starts to boot up (showing its icon on the dock) and then shuts down before completion.
If anyone has had a similar problem or knows where the fault might lie, I'd be very glad of any help offered.
Many thanks....

Addendum: Upon checking over the software bundled with the scanner (Canoscan Tool Box), I found a report log detailing the error. Can anyone help intepret this? Pic added below;
Any ideas? What is a EXC BAD ACCESS, or a KERN PROTECTION FAILURE?
Any help gratefully received. Thanks again...

Scanner canoscan LIDE 35

I have a scanner canoscan LIDE 35 I do not manage to connect to my macbook air. How should I do?

Hi harvey,
The latest drivers and software for the CanoScan LiDE 35 can be downloaded free of charge from the Canon USA website here:
CanoScan LiDE 35 Drivers and Software page
If you would like specific instruction for installing the scanner drivers and software on your computer, please reply with what operating system you have (Windows XP, Vista, 7, 8, 8.1 or version of Mac OS X) and we will be happy to provide instruction.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maverick won't let me use my Canon scanner anymore

After installing Maverick on my iMac my Canon scanner software will not work. I cannot add a scanner to my printer preferences or find an app that works. It seems a lot of items no longer work for ome reason.

I have a Canoscan 8800F. The version of Navigator EX 1.0 I have been using very successfully up to now just crashes as soon as I open it. I have tried downloading a new driver from the Canon website but it does not seem to go anywhere. If I try to use Image Capture it just opens up with no printers or scanner selected and no means to add them, just a blank page.

I have OS 10.8.2 and connected the scanner Canoscan Lide110. I downloaded the drivers, looked installed, the scanner appears in the system preferencies, but it doesn't open!!! what i have to do? thanks in advance for your kind advice!

I have OS 10.8.2 and connected the scanner Canoscan Lide110. I downloaded the drivers, looked installed, the scanner appears in the system preferencies, but it doesn't open!!! what i have to do? thanks in advance for your kind advice!

Thanks for your help Karen Serena. Obviously, it appears in the list of printers and scaners on the left, into the "Print and Scan" with system preferencies. Then i click it , it appears on the right, then i click "open scanner" below the name and opens a window writing "open device failed". When i connect the scanner, it makes a sound but that's all...the scanner is dead, even if I push any button...Also there isn't any window opened to prove the function of the scanner, only is shown in the scanner list, that's all.

I updated to Photoshop CC 2014 and now it won't recognize my Canon Scanner LiDE 210.

I updated to Photoshop CC 2014 and now it won't recognize my Canon Scanner LiDE 210.
Is there a fix for this? It worked with CS6 and CC just fine.

Did you turn off the "show transform controls" option in the move tool?
It sounds like you were using that previously.
And you can always transform by using the Free Transform command (command/control T).

Canon scanner Lide 50 with my new mac 0s x 10.9.2

my canon scanner (Lide 50)can't communicate (no driver needed?) with my new mac 0s x10.9.2

Have you downloaded the driver for it and added it to System Preferences/Print and Scan?
Try Applications/Image Capture.

I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren

en

I´ll check the messages. Elements 4.0.
Peter
9 dec 2014 kl. 18.44 skrev Jeff A Wright:
I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Peter Lindgren do you receive any specific error messages when you attempt to install Photoshop 7 or Photoshop Elements? What version of Photoshop Elements are you installing?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6999366#6999366 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6999366#6999366
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Canon Scanner LiDE 110 Cannot communicate with scanner

I have Cannon Scanner LiDE 110, it works perfectly fine last week until i try to use it again yesterday. now it just give me this message : "Cannot communicate with scanner. Cable may be disconnected or scanner may be turned off. Check status. Scanner driver will be closed. Code:5,155,55." I'm using windows 7 64bit. i've been trying to disconnect and reconnect the scanner and restart my pc. but it not help. the scanner didn't even give me the sound signal when i connect it.
i've been trying to use the scanner in other computer but it just gave me the same result, there's no even sign it's been connected.
i try to reinstall the driver but it ask me to connect the scanner to computer, i reconnect it and it's not detected by the driver installer.
So, what's wrong with my Scanner? please help me, i really need it..
ps: sorry for my bad english, it's not my native languange

I have the same problem, but on my other computer under WinXP operating system Canon Scanner LiDE 110 with Canon MP Navigator EX 4.0 works fine.
Support please help us!

Canon Scanner & TWAIN File

Greetings. I just received a Canon LiDE 500F scanner from the Apple store. This thing was was a snap to set-up, but whenever I try to scan I get the following message: "Can't find TWAIN library in your system." I have installed, uninstalled and reinstalled the software about 6 times. No help. Any ideas? I'm trying to finish a Mothers Day project and time is of the essence. Thanking you in advance. - Regards. - Frank

Then consider, "Did I install the application and drivers in the order and manner that Canon requires?" And, "Did I repair permissions afterwards to insure that everything that went into /Library/Application Support and elsewhere have the right ownership?"
there should be a folder in /Users/Shared with your Canon support and button folders.
The fact that VueScan can't talk to the scanner would seem to indicate that there is a setup and configuration problem.
USB cables that work for other purposes, I've found, don't always work with Canon (and I like Canon scanner so much I've bought a couple LiDE models).

Canon Scanner CanoScan 8000F

Similar Messages

Maybe you are looking for