Canon Scanner.....

I have an iBookG4 and a canonScan N670U. I have updated to CanoScan Toolbox X but I can't find any instructions on how to use the blasted thing, everytime I try and scan something I get a message saying "the scanner plug-in was not found" If i manage to get past that stage then the Toolbox asks me to specify a program where the scanned image is transferred. I would like to place the scanned image on my desktop but this doesn't seem possible. What can I do, I am tearing my hair out and grinding my teeth, I think I may be losing what few marbles Ihave left too........ Please help!
Thanks

Goto this site to download manuals:
http://consumer.usa.canon.com/ir/controller?act=SupportDetailAct&fcategoryid=235 &modelid=6625.
You should be able to use iPhoto, but if you cannot, then you can get something like Adobe Phote Elements to down scan photos in. Kodak use to provide a free photo process app, but it was limited in its capability.

Similar Messages

I updated to Photoshop CC 2014 and now it won't recognize my Canon Scanner LiDE 210.

I updated to Photoshop CC 2014 and now it won't recognize my Canon Scanner LiDE 210.
Is there a fix for this? It worked with CS6 and CC just fine.

Did you turn off the "show transform controls" option in the move tool?
It sounds like you were using that previously.
And you can always transform by using the Free Transform command (command/control T).

Canon scanner Lide 50 with my new mac 0s x 10.9.2

my canon scanner (Lide 50)can't communicate (no driver needed?) with my new mac 0s x10.9.2

Have you downloaded the driver for it and added it to System Preferences/Print and Scan?
Try Applications/Image Capture.

I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren

en

I´ll check the messages. Elements 4.0.
Peter
9 dec 2014 kl. 18.44 skrev Jeff A Wright:
I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Peter Lindgren do you receive any specific error messages when you attempt to install Photoshop 7 or Photoshop Elements? What version of Photoshop Elements are you installing?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6999366#6999366 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6999366#6999366
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Photoshop CS3 wont recognise my Canon scanner

Hi
Updated to CS3 and my canon scanner wont get recognised. I have a Power PC G5 Mac and did a forum search but everything seems to be about intel macs.
Can someone please help me?
Cheers
Stag

Yes i did all that. I found this and followed:
"1. Use the "Deldrv" program to remove previously unsuccessfully installed driver(s). The "Deldrv" uninstaller can be found on the Canon website at the bottom of the Canon scanner driver pop up window that you access to get the drivers for your scanner.
2. Use the "Find?" under the File menu (command-F) or use Spotlight (command spacebar) to find the folder "CFMSupport". Select this folder (don't open it), and use the 'Get info' command in the File menu (command-I) to open information about the Ownership and Permissions of the folder. Click on the arrow beside 'Ownership and Permissions' so it points downwards, then click on the arrow beside 'Details' so you can see the details. Click on the padlock icon so it is unlocked. Then set owner to your user name, set the Group to admin, and set access for all users to Read & Write.
3. Reinstall the CanoScan Toolbox first, then the scanner drivers from the Canon website or your CD, restart your computer."
Im gonna call Canon. If nothing, apart from vuescan, any free applications I can download?

Using a Canon Scanner in Panther

I made the System 9 to 10.3 upgrade this weekend and have almost everything up and working or figured out.
My Canoscan N650U is still a mystery. I downloaded the drivers from Canon and ran the installer. I had expected that the scanner would show up in "Image Capture". Alas it tells me I have no input device installed (although I am on the scanner tab in Image Capture). I did run teh repair permissions utility, but nothing changed.
System profiler shows the presence of a Canon scanner on the USB.
How do I get the scanner to scan?
I think I can still run the Canon toolkit in Classic, but I was expecting to be able to work with the scanner in 10.
Any help welcomed

To add a little more to John's responce.
I have found that If your Scanner worked with 9 That most times all of the utilitys and Insallation and setup for OS9 do not transfer to 10, unless the Installer places a Set-up and Utility folder in OSX.
Many times, and bear in mind each Scanner can be a little different. You can do a couple of different things, You can either go to the Scanner Manufactures site and search for the Insallation and set-up for OSX and when it downloads the folder or folders you have to manually drag and drop them to the Applications folder, then open that folder and then double click to open them in OSX.
Remember Applications...NOT OS9 Applications.
This will sometimes do it, more often than not.
The other way is to close OS9 and try to use the Insallation CD and see if it will download to OSX, some will some won't. This should give you some Idea's
Oh one other thing some Scanners only offer software for OS9 on there Install cd's and you may have to look for 3rd party software for your scanner.... Don

Canon Scanner LiDE 110 Cannot communicate with scanner

I have Cannon Scanner LiDE 110, it works perfectly fine last week until i try to use it again yesterday. now it just give me this message : "Cannot communicate with scanner. Cable may be disconnected or scanner may be turned off. Check status. Scanner driver will be closed. Code:5,155,55." I'm using windows 7 64bit. i've been trying to disconnect and reconnect the scanner and restart my pc. but it not help. the scanner didn't even give me the sound signal when i connect it.
i've been trying to use the scanner in other computer but it just gave me the same result, there's no even sign it's been connected.
i try to reinstall the driver but it ask me to connect the scanner to computer, i reconnect it and it's not detected by the driver installer.
So, what's wrong with my Scanner? please help me, i really need it..
ps: sorry for my bad english, it's not my native languange

I have the same problem, but on my other computer under WinXP operating system Canon Scanner LiDE 110 with Canon MP Navigator EX 4.0 works fine.
Support please help us!

Canon Scanner 9950f

Hi, Just moved to macbook pro 2011 10.6 version (from pc world) and unable to
use canon scanner 9950f--i can see the toolbox but when i hit scan i get no
driver message---checked canon and no driver available--has anyone been
able to use this scanner in snow leopard macbook pro
thanks, sandy

OK, I see that Canon does not support Lion. I bought a CanoScan 9950 and want to have it recognized and run VueScan. So far I cannot get the scanner recognized in About the Mac nor in VueScan. I downloaded drivers from Canon but it seems from the conversation they don't work with Lion. So what is a boy supposed to do? Is there a way to get the scanner recognized and run with VueScan or am I just SOL? Surely there has to be a fix.
In addition I have a Canoscan FS2710 which I have not been able to use for ages.

Canon Scanner & TWAIN File

Greetings. I just received a Canon LiDE 500F scanner from the Apple store. This thing was was a snap to set-up, but whenever I try to scan I get the following message: "Can't find TWAIN library in your system." I have installed, uninstalled and reinstalled the software about 6 times. No help. Any ideas? I'm trying to finish a Mothers Day project and time is of the essence. Thanking you in advance. - Regards. - Frank

Then consider, "Did I install the application and drivers in the order and manner that Canon requires?" And, "Did I repair permissions afterwards to insure that everything that went into /Library/Application Support and elsewhere have the right ownership?"
there should be a folder in /Users/Shared with your Canon support and button folders.
The fact that VueScan can't talk to the scanner would seem to indicate that there is a setup and configuration problem.
USB cables that work for other purposes, I've found, don't always work with Canon (and I like Canon scanner so much I've bought a couple LiDE models).

10.6.7 : canon scanner stops working

Hi,
I updated to 10.6.7 and since then my MP750 canon scanner isn't recognized any more. I tried to reinstall the scanner driver downloaded from canon website but with no luck... This worked for the 10.6.5 -> 10.6.6 transition.
Printing on this multifunction is working though...
The only workaround I found is to use ... windows XP in virtualbox

Update : re-installing the file called "mp750osxsd12131ej7.dmg" solved my issue.
Cheers.

Hatte eine Canon-Scanner 9000F zum Scannen von Dias gekauft vor längerer Zeit mit beiliegender SW Adobe Photoshop Elements 8. Funktionierte einwandfrei mit dem ScanGear. Nun habe ich neu Photoshop Elements 13 installiert. Damit funktioniert der ScanGear n

Hatte eine Canon-Scanner 9000F zum Scannen von Dias gekauft vor längerer Zeit mit beiliegender SW Adobe Photoshop Elements 8. Funktionierte einwandfrei mit dem ScanGear. Nun habe ich neu Photoshop Elements 13 installiert. Damit funktioniert der ScanGear nicht mehr, der aber für Dias notwendig ist. Es startet immer nur die SW für den Flächenscann. Ich habe auch schon die neuesten Treiber und SW-Komponenten installiert, keine Änderung. Können sie mir hier helfen? Gibt es einen speziellen Treiber oder entsprechende Einstellungen hierfür?

Need to get Canon Scanner Lide210 to be in scanner list in PSE10 for Mac

I have just upgraded from PSE9-Mac to PSE10-Mac on MacOS 10.7.2. I have a CanoScan Lide210 and have enjoyed using the import feature in PSE9 and my Canon scanner for importing images. I recall it being a process for the scanner to be placed in the list when installing PSE9, but can't seem to find where this process occurs. I despise using the clunky scanning interface from Canon, and have really enjoyed the feature in PSE9. I upgraded because I was having some lock-up issues during import and figured a newer version might help. Thanks!

Thanks..I have copied over and posted where you led me. I just spent a lot of time with Nidhaal from Chat at Adobe and he was unable to help. Though I can now see my scanner in the drop-down list, it will not open a preview or scan window in PSE10. He has recommended using PhotoBooth or other scanning interfaces to capture, then import and edit within PSE10. I am frustrated by the extra, clumsy steps to do something I have been doing for thousands of photos over the past couple of years. I, at least, want to create a process that is reasonably tried-and-true from other MacOS/PSE users. I appreciate the direction you've given me.

Canon Scanner 8400f

I have tried using this scanner with Photoshop and it can recognize the scanner and it can scan. However, the picture shows up but has a "stripe" of colors...green, blue and red down the whole picture. I've tried reinstalling the driver...another scanner program listed on another forum, calibrating the scanner...and still the stripes...What next?

D/FW
I had a similar problem after receiving our new iMac iSight. The iMac would not sleep. If I attempted to put it to sleep, it would instantly wake without any provocation.
I traced the problem to our Canon scanner. It only uses bus power from the 2.0 USB port and when it is connected, you can hear it power up after the iMac displays the current user's desktop.
The temporary fix was just to disconnect from the USB hub until it is needed, then connecting only while it is being used. Until Canon comes out with new drivers, this seems to be the solution.
~M

Older Canon scanner driver

I have a nice functional older Canon scanner (model #N1220U), which ran great under OS 9 under Classic with the driver that came with it, which was great until I upgraded my mini from a Power PC to an Intel—no more Classic and no more OS 9.
I have searched the Canon site for a driver compatible with Mac OSX and found Scan Expert v. 380X which I downloaded. But it turns out that is only a Photoshop plug-in or something. I don't have Photoshop to plug it into.
Does anybody know what free standing driver will run my still functional, little used scanner? And where I could get it?

That may ultimately be it. It is $40 (although they don't make it easy to find that out) and that may be the most reasonable solution, short of simply buying a new scanner.
I can tell you it won't be a Canon. It isn't that old that they should have no driver that is compatible with a modern operating system.
Thanks for trying. That may be the ticket. If you have any other ideas, send them along.
Or anybody else.

Twain Driver...for Canon Scanner

I am trying to get my Canon 8400F to work with my HP computer using Windows 8. I've had many problems with this operating system and had to completely restore my computer a little while back. I'm finding the issue of drivers quite problematic really...Anyway, I understand that I need a TWAIN driver....I hate having to install these driver update applications because they are of no help and one of them caused me great trouble when I updated one driver. Can someone please help?
(My old HP laptop died last week and I really want to use my scanner)

Hi,
Canon Scanner is from a company called Canon. The following link shows it is only compatible with Windows 7:
http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_8400f
Please try the following setup for Windows 8:
http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/unable-to-find-drivers-for-canos...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

USB redirection with Canon scanner -- driver must be reinstalled

I am trying to get a Canon DR-M140 scanner to work through Remote Desktop USB Redirection.
When connecting the scanner through USB Redirection to a Windows Server 2012 R2 remote desktop session, the scanner device appears in the remote session's device list, but the TWAIN driver does not load. The scanner appears as an "unknown" device
and the properties dilalog shows "Device status: Reinstall the drivers for this device. (Code 18)" However, reinstalling the drivers has no effect.
Repro steps:
- Windows Server 2012 R2 server
- Windows 8.1 Pro client
- M140DRIT_V12SP1 driver package installed on both server and client
- RemoteFX USB Redirection group policy enabled on client
- CANON DR-M140 checked in mstsc devices tab
- Connect to server
- Open Devices and Printers
- CANON DR-M140 appears in Unspecified section
- Double-clicking for properties and clicking Hardware tab shows "Device status: Reinstall the drivers for that device. (Code 18)"
Does anyone have specific or general advice on getting this to work?
Thanks,
Walter
Walter Smith

First, I would like to confirm the following questions:
1. Is there an exclamation mark or question mark in Device Manager after plugging the scanner? If so, please let me know.
2. Which software is used on the machine to scan file, the built-in application or Canon software? When trying to use the application to scan, is there any error information?
At this stage, please download the Canon software and install it for a test.
Canon Scanner software
Then, please use the Canon application to scan file again.
If there is any error message, please upload it for research. Meanwhile, please access the following folder and upload the setupapi.dev.log file.
C:\Windows\inf\setupapi.dev.log
Hope this helps.

Canon Scanner.....

Similar Messages

Maybe you are looking for