Canon Selphy CP-720 only works with old 10.5 Driver

I posted this to help others who have the same problem. The Gutenprint driver that comes with Snow Leopard doesn't work for the Selphy CP 720. I had to download the old Canon drivers from the Canon website (for Leopard OSX 10.5), then reinstall the printer.
1) Download from Canon
2) Install, then restart computer
3) Remove the printer from the list in preferences, then add again
4) Select the Canon driver (doesn't say Gutenprint in the name)
This was the only way to get the printer to work. I can't say whether it prints any worse in 10.6 since I haven't connected it to my Mac Mini running 10.5 to test, but it works. Hope Apple updates the list at least. I can understand if they don't want to add the driver since it is for Leopard, but it is better than a driver that does nothing.
Hope this helps others... it will probably work with many of the other Selphy models.

hi, i have a Canon Selphy CP750... the prescribed steps didn't work for me. The printer just says "No Paper", I tried downloading the driver for both 10.6 and 10.5, but still not working. The printer works fine with my old Windows based PC. Any other suggestions from anybody? Thx.

Similar Messages

PSE 9 only works with old AIR version on Win 7 x64. Adobe please help.

I'm hoping that Adobe can jump in and help here as there are some real versioning issues with the components that PSE 9 uses. I've made a number of posts in the Adobe AIR forum (while I was figuring this out) and have exchanged with Adobe resources regarding my problems with Adobe AIR on Win 7 x64. They are still looking into it.
PSE 9.0 comes with
   Adobe AIR 1.5.3.9130,
     Adobe Community Help 3.2.1.650 (an AIR app), and
     Adobe Photoshop.com Inspiration Browser 3.07 (an AIR app)
That Adobe AIR 1.5.3.9130 is an old version of AIR. Since then there have been production releases 2.0.2, 2.0.3, and the latest 2.0.4. If you upgrade to ANY of those Adobe AIR 2.x versions on your Win 7 x64 system, ALL your Adobe AIR apps will stop working.
Adobe Community Help 3.2.1.650 is an out-of-date version and it continually nags you to update to the newer version. If you do that, the install will first upgrade Adobe AIR to 2.0.4 and then upgrade Help. Help will no longer work and all Adobe AIR apps will not work.
I have installed and uninstalled PSE 9 about 25 times, I have installed and ununinstalled different versions of AIR over 50 times, etc. etc. to come to these conclusions. I have tested Adobe AIR 2.0.2, 2.0.3 and 2.0.4 and NONE of them work on Win 7 x64.
I'd really like someone from the Adobe PSE team to look into this. I don't have time to spend hours on the phone with support. I have described the problem and can offer more details as necessary.
Thanks . . . . Brian

Ankush,
Thank for your two responses. I have also received some more emails from Chris Campbell around AIR in particular so I'll try to work with him first.
Thanks you for confirming that you do not see any errors after installing the updates. Also that Adobe Help and Inspiration Browser both work after updating AIR to 2.0.4.
I will answer your questions for now though:
1. You asked:
Have you tried this:
Uninstall PSE 9, PRE 9 and any other CS5 Adobe application.
Uninstall Adobe AIR.
Install PSE 9 and run the updates of Adobe AIR and now use the applications?
If it still gives error, uninstall Adobe AIR and then install the 2.0.4 version directly which is available on Adobe.com.
What happends now?
     Yes, I have done all of these combinations a few times without success.
2. The directories for Adobe Help and PIB look fine. They are
    C:\Program Files (x86)\Adobe\Adobe Help
    C:\Program Files (x86)\Adobe\PhotoshopdotcomInspirationBrowser
As I said, Chris Campbell has asked me for info and to run some tests. I'll let you know how it works out.
Thanks . . . . Brian

N95-3 (NAM) only works with old screen

I have recently acquired an n95-3 which had an LCD screen which displays properly, but the display is very dim and flickering (backlight is fine).
I therefore ordered a replacement screen for an n95 and the screen displayed no picture, but backlight is OK. I tried with the screen on my friend's n95-5 (China) with the same result. I'm confused as to why the old screen works but the new ones don't. Are the pinouts different?

Ankush,
Thank for your two responses. I have also received some more emails from Chris Campbell around AIR in particular so I'll try to work with him first.
Thanks you for confirming that you do not see any errors after installing the updates. Also that Adobe Help and Inspiration Browser both work after updating AIR to 2.0.4.
I will answer your questions for now though:
1. You asked:
Have you tried this:
Uninstall PSE 9, PRE 9 and any other CS5 Adobe application.
Uninstall Adobe AIR.
Install PSE 9 and run the updates of Adobe AIR and now use the applications?
If it still gives error, uninstall Adobe AIR and then install the 2.0.4 version directly which is available on Adobe.com.
What happends now?
     Yes, I have done all of these combinations a few times without success.
2. The directories for Adobe Help and PIB look fine. They are
    C:\Program Files (x86)\Adobe\Adobe Help
    C:\Program Files (x86)\Adobe\PhotoshopdotcomInspirationBrowser
As I said, Chris Campbell has asked me for info and to run some tests. I'll let you know how it works out.
Thanks . . . . Brian

Nokia MD-51W JBL PlayUp only works with old device...

I've got this portable speaker and have used it for a while with an older Bluetooth 2.1 + EDR enabled phone, now switching to newer phone and the speaker connects, but no sound coming out of the speaker. Tried with various Bluetooth 3+ devices like HTC One X, Iphone, Samsung GS4 and the speaker is not working with any of them. Since higher Bluetooth versions are backward compatible with lower versioned devices, it should not be any problem I think. Running latest software on the speaker (same one as it was shipped with, 0.63). Any chances to get the speaker working with newer devices?

lbcarv wrote:
I have the same problem, using Nokia Lumia 820 or iPhone4. No sound from the speaker, even in bluetooth, NFC or cable connection. Did you solve your problem???
Welcome to Nokia Discussions, lbcarv.
If there is no sound output coming out on all connecitivity mode, even on direct cable connection. I'd advise sending the device to the store of origin or to a Nokia Care Centre in your area.
Good luck

How do I get a Canon Selphy CP510 printer to work with OS X 10.7.4 on my MacBook?

I have tried the Canon download site but the latest ddriver they offer does not work.

Buy an iWork 09 DVD from a source such as Amazon or eBay.
(112000)

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule. Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades). Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems. But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule. Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it. Is there a work around? Would a newer but old Airport Express be able to extend network to Sunflower? Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this
When you edit your TC's settings the access controls appear under the Network tab, don't they?

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with my apple ID. Please Help me I speak Spanish so if my English is not ok I´m sorry about it.
Do you think that apple has to reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s??

I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me......

I need version 3.6.16 for an at home online job. I am unable to find it anywhere from a secure source. Is there a way to get a link to download it? The ChaCha Toolbar only works with this older version. Thanks!

I need the older version 3.6.16 for my at home based job for ChaCha. Their toolbar only works with this version and they say it is more compatible with this. And I have not been able to find a secure link to download this older version. Can you give me a secure link or is it possible to download this older version securely?

If you only need Firefox 3.6 for just one thing then you may be better off using a portable version of Firefox as it will not impact your Firefox 6.0.2 install. You can install it on hard disk or on a usb flash drive. Firefox 3.6.22 is the current security update as 3.6.16 is old.
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
-CharlieH23

Copy and paste only this area, you may have to scroll down.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 6019 MB
Free memory: 3360 MB
Memory available to Photoshop: 5227 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2112 MB
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4000
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics 4000
Driver Version: 10.18.10.3958
Driver Date: 20140930000000.000000-000
Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 2112 MB

Playbook only works with charger or USB cable despite batter showing 100% charge

After 2 years of faithful service, playbook only works with charger or USB cable despite batter showing 100% charge. As soon as the cable/charger is unplugged, it just switches off. When cable is plugged in again, and start button pressed, it reboots. I have reinstalled sftwer from scrathc via Desktop Manager, but the problem persists. I saw this problem raised in the fora several times, but never any explanation why it happens. Any ideas?
Solved!
Go to Solution.

A high resistance between battery lead and motherboard would allow trickle charge but not power discharge.
If you want to risk it, prise off the back of the playbook using an old credit card, locate the two screws holding on the battery lead, remove, clean up, then replace. replace back carefully as the antennae connectors are pressure pads.
Sarah.

NB520, Replaced display, only work with AC power, not work with battery

Hi
I just replaced a broken display on my 7 months old Toshiba NB520 and now it only works with AC power.
The battery icon shows 52% but not charging.
When I plug out the AC power, it turns off.
Help

Please help guys. I dont know what more to do...

Working with old PDF files - Release Clipping Masks

Hi Everyone....Please Help Me!
I am regularly required to work with old pdf files for my company, which I have to open in Illustrator to amend and update (we don't have access to the original .ai files).
Whenever I start to work on these files I have to spend ages just unconnecting the elements of the artwork, usually by right clicking and choosing "release clipping mask"
Is there a way to just disconnect everything when you open up an old pdf document in Illustrator?
Tá mo chroi bhríste
(it has my heart broken - in Irish!)

Always keeping a careful eye on the effects of released clipping masks, the process can be accelerated using the keyboard shortcuts rather than hunt-and-click.
Open the PDF.
Ctrl/Cmd+A (Select All)
Ctrl/Cmd+Alt/Opt+7 (Object > Clipping Mask > Release) Hold down Ctrl/Cmd+Alt/Opt and tap the 7 key repeatedly to initially release all top-level masks, then continue through the levels of nesting that may be present. With Show Bounding Box and Show Edges active it's easy to see when the releasing has stopped...usually only a few levels.
Deselect, then find one of the orphaned mask objects, which will have a fill and stroke of None. Select it, then choose Object > Select > Same > Fill & Stroke to select all the orphaned mask objects.
Delete.

Hd intel 4000 code 43 on windows 8.1 - It only works with an older driver version

Hi there I have an HP Pavilion Sleekbook 14 PC (HP Pavilion Ultrabook 14), with a 18FA motherboard - version 82.23, F.12 Bios, and a Intel(R) HD Graphics 4000. The graphic card only works with the 9.17.10.2932 (12/12/2012) driver, and everytime I try to update to a newer driver version, it shows the "Code 43" error. Does anyone knows how to update the drive and solve the "Code 43" error? Without solving this issue, I can't install the Windows 10. I've tried to update to Windows 10, but it doesn't run this old graphic display driver and it only gives me a blue screen, and if I install a new driver version, there it comes the "Code 43" error. Thank you, guys.

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion14 Sleekbook and issues with the Drivers for Windows 8.1. If your computer is having problems finding and installing operating system updates, try using the Windows Update Troubleshooting tool to fix the problem.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.

I bought this iPhone from Apple Retail Store for the full amount, but it does not work with my SIM card only works with AT&T

Hello,
I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
Thanks,
Best Wishes

When did you buy it?
Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason. Return it and get your money back, then use that to purchase an unlocked phone.

Canon Selphy CP-720 only works with old 10.5 Driver

Similar Messages

Maybe you are looking for