Canon Selphy CP90

I have a Canon Selphy 900, I haven't used in a few months. I tried to print a picture and it said out of ink. I replaced the ink cartridge. Tried to print again and the ink film stuck to the paper- tearing the brand new cartridge film. I assumed it was a fluke and installed a new ink cartridge. It did the same thing. Any help would be appreciated! Those cartridges are expensive and I'm not willing to try again without some assistance!! Thank you!!!

How to install Canon Selphy 900 on OS X 10.10 Yosemite

Similar Messages

Need help with driver for Canon Selphy CP810 osx 10.8.3

I need help to get my Canon Selphy CP810 running .
Could not find a driver that works on the WEB.

Here's a driver from Canon for 10.8.x.
Clinton

HT4356 How to use Canon Selphy Photo Printer (CP900) to print from iPad 3?

How to use Canon Selphy Photo Printer (CP900) to print from iPad 3? I would like to print the photos in my ipad on my Canon Selphy Photo Printer (CP900) which has wifi...

hi
ideally if you want to print from the ipad you should have an airprint enabled printer:
http://support.apple.com/kb/ht4356
however, there are workarounds, you can download a decent third party app to print such as print n share, printcentral or printdirect

Problems with iPhoto 6 and Canon SELPHY CP720

Just got the CP720 and tried printing from iPhoto. All the pictures come out too dark - noticeably darker than on my Apple display. This makes iPhoto editing worthless, since what you see is not what prints !!! Spent two days researching Colorsync and ICC profiles documentation, but can't figure out what the problem is. Canon states no guarantee that their printers work with 10.4.x. A query to their customer service produced no solution.
I've seen a couple references to this same iPhoto compatibility problem on other Canon printers. If you are printing iPhoto to Canon, compare your photos and see if you may be experiencing this as well.
Anyone figure this out yet?
G5 Mac OS X (10.4.8) Canon SELPHY CP720 Printer

Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Canon Selphy CP720 Network Problems

I just dowloaded the new CP720 driver for Leopard from Canon. When I tried to add the printer via bonjour (it is connected to my PC), I can select the printer but the driver doesn't come up.. it asks me to select from the list (it is not in the list)... or choose "other". In the other menu, I go to \library\printers\selphycp but none of the items in any of the directories seem to be what i need. If I connect directly, it finds the printer and driver with no problem. Has anyone gotten this to work? I cant even tell what the driver file should look like, though most are grey in the list anyway.
Any help would be appreciated. I thought of connecting to my time capsule but i don't want to waste my time just to have the same thing happen.

Hello Mr Kay,
From reading your posting I am not sure of your setup. If you have the Selphy connected via USB to the Windows computer, and wanted to connect to this share from your Mac, then you would need to use a Gutenprint driver rather than the Canon driver. Looking at the supported printer list for v5.2.0rc1, the ES20 is listed as a supported model, so you will need this version if the above is your setup.
Once the driver is installed on the Mac, you can open System Preferences > Print & Fax and select to Add a printer queue. Select Windows and browse for the share on the PC. After selecting the share name, then open the Print Using menu and browse for the 'Canon Selphy ES20 - Gutenprint + CUPS v5.2.0'.
If the printer is not connected to the Windows computer, then please describe your current setup - or the type of setup you would like to have.
Regards,
PaHu

I need a v.10.5 driver to run a Canon SELPHY and my Mac is v.10.9.4. How do I make this work?

I have a Canon SELPHY printer that requires a MacOSX v 10.5 driver. I cannot get it to operate with my Mac. What do I do?

This page has a CP760 driver for OS X 10.7. Alternatively you could use the Gutenprint drivers from here. Be sure to read the special note(s) for use of the Gutenprint drivers with dye sub printers.

Canon Selphy stopped working...

Hi. My Canon Selphy 510 photo printer stopped working with my macbook. It worked before, but now stopped. I was able to connect it to my g4 tower and get it to print from there (so we know it's not a hardware or cable issue), I was also able to print directly from my camera. I also have another printer on the network that is working 100% with this mac.
On the macbook, I uninstalled, then reinstalled the canon drivers. reboot, etc. no dice.
Here's the problem:
When you print, it fails. And the printer queue status goes back to Stopped. The normally lit green light blinks red just once.
At the end of this post is a clip from the error log (I set cups to debug loglevel for this). Notice how it thinks that it's out of paper and or ink, but it's not! I even tried to print without the paper in, to force it into a REAL no-paper-state, and this didn't help.
Let me add, the Canon Printmonitor application always just says Ready, and doesn't indicate any error state.
Do you guys have any ideas? Could there have been a software update I installed between now and when the printer worked that broke something? Thanks.
D [16/Jun/2007:06:42:58 -0400] [Job 34] JobManager converting file: /private/va
r/spool/cups/d00034-001 (7 args)
D [16/Jun/2007:06:42:59 -0400] [Job 34] `/private/var/spool/cups/d00034-001' ha
s 1 pages.
D [16/Jun/2007:06:42:59 -0400] [Job 34] PDFtoTiogaRaster: xResolution = 300, yR
esolution = 300
D [16/Jun/2007:06:42:59 -0400] [Job 34] PDFtoTiogaRaster: SheetWidth = 295.68,
SheetHeight = 579.72
D [16/Jun/2007:06:42:59 -0400] [Job 34] ImageableArea.origin.x = -0, ImageableA
rea.origin.y = 0, ImageableArea.width = 295.68, ImageableArea.height = 579.72
D [16/Jun/2007:06:42:59 -0400] [Job 34] frameWidth = 1232, frameHeight = 2415
D [16/Jun/2007:06:42:59 -0400] [Job 34] ColorSyncProfileID in PMConverterSetupT
icket is different from that in PrintSettings: expectedProfileID = 1580, actual
ProfileID = 0,
D [16/Jun/2007:06:42:59 -0400] [Job 34] PDFtoTiogaRaster USING DISPLAY LIST IMP
LEMENTATION
I [16/Jun/2007:06:42:59 -0400] [Job 34] kPMEventJobProgress:1 1 1 1 1 1 0
D [16/Jun/2007:06:43:00 -0400] [Job 34] sendJobProgressEvent: currentPage: 1 cu
rrentCopy: 1 currentSheet 1 percent: 86 isEndOfSheet:no
I [16/Jun/2007:06:43:00 -0400] [Job 34] kPMEventJobProgress:1 1 1 1 1 1 86
D [16/Jun/2007:06:43:00 -0400] [Job 34] sendJobProgressEvent: currentPage: 1 cu
rrentCopy: 1 currentSheet 1 percent: 100 isEndOfSheet:yes
I [16/Jun/2007:06:43:00 -0400] [Job 34] kPMEventJobProgress:1 1 1 1 1 1 100
E [16/Jun/2007:06:43:03 -0400] [Job 34] fatal: The specified Ink Cassette and P
aper cannot be found.^MReplace the Ink Cassette and Paper.
E [16/Jun/2007:06:43:03 -0400] PID 258 stopped with status 254!
D [16/Jun/2007:06:43:03 -0400] UpdateJob: job 34, file 0 is complete.
D [16/Jun/2007:06:43:03 -0400] StopJob: id = 34, force = 0
MacBook Mac OS X (10.4.9)

Hi there,
We have a Selphy 810 and I was going to test this on an Intel Mini, as I'm concerned it may be an issue with the PPC drivers on the Intel Mac, but unfortunately the power supply for the printer is missing so I cannot check this for you just yet. I'll keep on the hunt and hopefully have a reply soon.
In the meantime, what application are you trying to print from? If its a Universal app, then you could try setting the app to open using Rosetta. This would help to identify if its an Intel issue. Also, have you tried setting the Page Setup > Format for to the Selphy rather than 'Any Printer'?

Canon Selphy Printers (ES2/ES3/ES30/ES40)

Has anyone had success printing to a Canon Selphy printer with 10.6? I have an ES2. I tried resetting the print system and using the Gutenprint driver but when I try to print from iPhoto, the printer driver hangs endlessly at "Print page 1 - 100%" but nothing ever happens on the Selphy. I tried also using the older ES2 driver (not Gutenprint) and this does not work either.
Anyone have any suggestions? Right now I am booting into VMWare and printing from a Windows virtual machine. Not the best use of time!
I saw someone else got a Selphy printer to work but I am not sure how. Sounds like they were using Gutenprint. Hm.

I've a Selphy ES20 - and now it prints.
The Gutenprint driver won't work - neither Gutenprint 5.2.3 nor 5.2.4.
I've made it nearly like zenobiaflex:
(Due to I don't now what the best way is, I write down my steps)
1.) Installed Gutenprint 5.2.4 = don't print
2.) Installed the Canon ES20 printer driver 2.1 from Canon Website (although it's not for OS X 10.6)
3.) Deinstalled Gutenprint with "gutenprint-uninstaller-1.2.6.dmg" (see http://gimp-print.sourceforge.net/MacOSX.php)
4.) Reboot the Mac
5.) After reboot, the Mac finds the Selphy by himself and can print (under iPhoto, Photoshop Elements and so on)
After all: I hople like zenobiaflex that Apple or the Gutenprint-Project recognize that the driver is completely useless (more tests before approval?).

Canon Selphy ES1

I am trying to print from my iMac to a Canon SELPHY ES 1 using Gutenprint v5.2.3 driver and connected using a USB cable. The printer and Mac recognise each other but it doesn´t work.

Try using this driver making sure you use the ES3 version (not Gutenprint version) worked for me running iMac 20 inch 2.4 GHz Intel Core 2 Duo with Mac OS X Lion 10.7.5
http://canoncanada.custhelp.com/app/answers/detail/a_id/37826/~/canon-selphy-es- series-printer-driver-6.0-for-mac-os-x-10.7
Need to download then install.
Good luck!

Aperture and Printing with a Canon Selphy dye-sub

Hi everybody,
I want to use my Canon Selphy CP510 (dye-sub) printer for prointing from Aperture. I was used from Photoshop to disable color management in the program, but make use of the color management in the printer driver. The printer driver came without any ICC-profile, but by this way, prints became excellent.
In Aperture the only way seems to be to set (in the Printing Windows) Color Management to "System Managed". By this way, color become dark, dull, and there is also a light color cast.
I found in the web a ICC-profile from am CP330, but nothing changed, when I selected this profile for printing.
Do you have experience with this printer (or any Canon Selphy printers)?
Someone told me to let make a color ICC for this printer by professionals (send a print of a certain color traget to a studio with a special scanner in order to produce a color profile)
regards,
Sandro

I would suggest running the ColorSync Utility in Applications/Utilities. Click the Devices toolbar button and click on your printer in the Printers section of the list. That will display what profile the OS is using for the printer. Even if the printer did not come with a profile, the OS will assign a generic profile to it.
Try selecting that profile as the printer profile to use in the Aperture print dialog. I think that might be similar to what you were doing in Photoshop.

My Canon selphy CP800 is not support by OS X Lion. Now what?

I recently upgraded to Lion. I have a Canon Selphy CP800 photo printer, and I am unable to print photos. Canon does not have a driver for this. Canon Support worked with me to try and get around this stumbling block to no avail. Does anyone out there have a solution?

After downloading this driver
file:///Users/winfordb/Downloads/SELPHY%20CP%20series%20Printer%20driver_6.2.0.1 .pkg I tried installing it and got the message "cannot install this driver it is not compatible with your os" I called canon suport and received the following instructions. " Control click on the downloaded package and then follow the instructions. I have a macbook pro running mavericks. IT WORKED! Don't connect the usb cable to your printer and computer until after the driver has installed. If you have the printer working via wi fi then this installation may show as CP900-2
FWIW.

Canon selphy cp400

My Windows 8 computer is not recognizing my canon selphy cp400. I had no problem installing it originally then all of a sudden it stoped working and now when I try to reinstall it say to check my cable, make sure the printer is on... Help

Hi normathibodeau1,
We apologize, but the SELPHY CP400 is not supported with Windows 7 or Windows 8. This is partly because of certain development specifications required by the operating system.
You are able to print directly from a digital camera that supports the PictBridge standard. This method requires that you connect your digital camera directly to the printer using a PictBridge USB cable (usually provided with the digital camera and not with the printer). Once connected, you would print to the printer using the controls on the PictBridge compatible digital camera. To verify if your digital camera supports the PictBridge standard, please refer to the documentation that came with your digital camera.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon selphy cp900 wireless print problem

I recently bought a canon selphy cp900, am running a mac os moutain lion 10.8.2. Am unable to do wireless priting via access point. Is there a solution to this problem?

I just purchased the Selphy CP900 and had the same problem. The fix was so simple. Plug your mac into Selphy via USB. Go into System Preferences -- Print & Scan. Highlight the CP900 and "ADD" / "+" the Selphy.
Disconnect the USB from the Selphy.
Restart the Selphy Photo Print Software and it should now light up green that all is connected.
I thought the problem was with the network connection, but my mac just couldn't find the Selphy. (duh)
Anyone have an answer for how to print from iPhoto to Selphy? The only thing I can figure out to do is to drag/drop my pic from iPhoto to my Desktop. (I added Desktop folder to the list of Folders on the Selphy Software App.)
I am running 10.7.5

Canon selphy cp900

print on a canon selphy cp900 using OS X 10.9

Take a list at this thread:
How to setup Canon Selphy CP900 printer over WiFi in Mavericks?

Iphone compatibility with Canon Selphy?

I have a Canon Selphy model CP270. Ive been attempting to print some photos that I've taken with my iPhone through the Selphy; so far I've tried to copy the iPhone photos from my Windows 8 laptop to an SDHC card. This works perfectly fine when viewing the photos on my laptop but when I insert the SD card into my Selphy (or Canon Ixus 105 camera) only the photos that I've taken with the camera show up, not the ones I've taken on my iPhone.
Could anyone suggest a way to solve this issue so I can print my iPhone photos through my Selphy?
Could it be to do with the iPhone's EXIF?
Thanks in advance ~ Oli.
(p.s: I was not sure which community to post this is in - sorry!)

This sounds like a question about general Photoshop CS5 use. This forum is specifically for people using the Photoshop CS5 FXG feature with Flash Catalyst.
I recommend you post this question to one of the more general Photoshop forums:
http://forums.adobe.com/community/photoshop
Your question will get much wider exposure there, and you are more likely to get an answer from the Photoshop community.

Canon Selphy CP90

Similar Messages

Maybe you are looking for