Canon Solution EX Main Menu problem???

I have a Canon MX882 and just updated to win 8.1 on a new computer.
I downloaded Solution EX from the canon web site.
When I go to open, the Main window only contains 1 Creative Park, 2 Creative Park Premium, 3 Member Logon windows.
I cannot get to the main menu that has the scanner and photo print etc. I have installed again and the same Main Menu appears! Kindly Help! Many thanks. MK

FIXED. I am OK now. I had to download MP Navigator. After this all is well. MK

Similar Messages

N81 8GB MAIN MENU PROBLEM!!! HELP PLS!!!!

I've had the nokia n81 8gb for 1year + now and just last night after transferring data from my computer the main menu got all messed up, all the folders were gone and the applications were all over the place on the main menu, the only folders left is this "Demo" folder and the "Tools" folder.
Pls help me fix this
Thanks in advance

Try these steps one by one:
1. Take out your battery and SIM after turning off your device. Put everything back in after 5- 10 minutes and turn on the phone.
2. Restore Factory settings: Type *#7780# at the standby screen.
3. Format phone memory (WARNING: This might result in loss of data in the phone memory, so back up the contents in your phone memory using PC Suite before you proceed): Type *#7370# at the standby screen.
Note that the default lock code for Steps 2 and 3 is 12345 unless you've changed it at any point.
Hope this helps. Good luck
Message Edited by deepestblue on 30-Aug-2009 08:57 PM
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Main Menu Problems

After readin the manual of my new iPod Touch, I decided to add the 'Notes' app to the main menu, however, when I hold down a menu icon (all the rest are supposed to 'wiggle about', nothing happens.
??

Don't know why it has happened so can't help you there.
One way to fix is to create new folders and move the items back where they were.
Go into main menu, options, new folder, give it a name.
Then hover over the item you want to move, options move to folder and select the folder you want to move it to.
Before you try all that though, have you tried a soft reset? This could fix the issue without losing the data.
The best way to get a quick response is to use the boards. Please do not be offended if I don't answer emails immediately.

A solution for Navigation Menu Problems

Many people have been complaining about iWeb messing up its rollover navigation menus at the top of each webpage. This phenomenon usually occurs when one has an existing site, and attempts to add another page to the site, thus requiring the menu at the top to be changed. What you will see if you visit the page is an incorrect navigation menu. The item may be cropped funny. Or it will show the wrong item name for a particular link. Or you will see duplicate names. Or the rollovers won't match the unhilited item names.
There seems to be a problem that sometimes occurs in which iWeb is unable to overwrite the previous versions of the navigation menus on your page up on the .Mac volume. If you run into this problem, this is how you fix it.
- Log into you iDisk. Navigate the folders to get to the offending page folder. The path will be Web/Sites/iWeb/your page name/your page name_files/
- Inside this folder you will see a series of png images which begin with navbar_. Select them all, and drag them to your trash can. They will be immediately deleted.
- Return to iWeb, and publish your page again. This will replace the navbar images with the updated versions.
This seems to work reliably. Anyone else have any experience with this technique?

Narly
There are various different approaches to this, which one really works, anyones guess!
The number one suspect is the cahing on the .mac servers, see my site, my bar is all over the place I made the changes last night! (Or the cahce of your own isp)
Peviously discussed options:
1. Clear your browser cahce, a few times!
2. Get someone else to hit you site, I did and I saw "menu look watch watch contact"
3. Using inspector, Page Tab, uncheck the box "Include page in navigation menu", publish your site, then recheck the boxes and republish.
4. Make a change to each page, move an image one pixel left and then back again and republish.
5. Press the Option key, between the ctrl + Apple key, while you select Publish, it changes Publish to Publish All Pages, kind of a forced refresh.
But generally its trial and error, and time!
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.5) Getting Started with iWeb - Tips here

Found a solution to Magic Menu problem

Download SIMBL if it is not in Applications support in Library
Download Menuanddockless
Drag package after opening zip file into SIMBL plugins
open Window in finder bar
select toggle Menuanddockless
drag pointer to finder bar it should then hide then to retrieve put pointer back in area

It was the default Telstra name. And I changed it to the name of the street. Ssid only. Not the code. I set remaining 4 devices up, a pc, 2 macs and an iPhone. All with the cutting out problem. Hasn't happened since.

Sharing A Solution - CREATING A SET OF SUB MENUS ON MAIN MENU IN iDVD

A recent question I posted got some attention from a number of people about how to create a set of sub menus on the main menu of an iDVD project. Evidently there are a number of us who tried to find a way to do this. I attended an Apple Store iDVD workshop and was fortunate enough to be the only one in attendance. So I had the Mac Genius’s attention for a full hour and he was very helpful. Here’s how to do this in detail. Good luck!
- Fred
CREATING A SET OF SUB MENUS ON MAIN MENU IN iDVD
NOTE: when you import the iMovie file don’t add to the drop zones or add music to the sub menus until you finish this work!
Go to the map view. Once in map view choose to show the map view as a flow chart moving from left to right – it’s the left selection of the two which appear on the left-hand side of the sizing slider tool that determines how big the map view icons will appear. You will want to set that slider to the minimum size to make it easier to navigate. Select the main menu icon.
Open the main menu to edit it and select “Scene Selection” and then copy and paste it as many times as you have sub menus. Each sub menu can only hold 6 scenes so if you have 18 scenes you will have 3 sub menus which means you will copy the first one and then past it twice which will give you 3 sets of “Scene Selection” options on the main page.
After you create the set of “Scene Selections” return to map view. You will now have a copy of each group of sub menus under each sub menu. The entire film will be recreated for each set of “Scene Selections” that you have and you need to edit them out so that you have only one for each sub menu.
You CANNOT simply delete the groups in front of the one you want to keep. For instance, suppose you have 3 sub menu groups and you are at the first sub menu selection. You cannot simply delete the first two groups in front of the third one – it will delete all of the sub menus after the one you want.
(REPEAT FROM HERE) Go to the last group of sub menus and select the scenes for the first group of sub menus. In other words go down to the last grouping of sub menus, locate the first sub menu group and choose each scene within the group and delete each one. This will leave you with an empty sub menu. Do this for the next group and any subsequent group up to the last one. Do not delete the last group! This is the group you want at this level.
Once you have deleted the scenes you can cut and paste the last group of scenes to the first sub menu selection in the group. Once done you can delete the other sub menus groups that come after the first one.
Once you have the group of scenes moved to the first sub menu selection you need to change the name of the group of scenes. For instance if you are working on group 13-18 you need to change the group name from 1-6 which is what it is currently named.
Repeat these steps for each successive group moving up from the last one to the top with one change – you will choose to delete the last group from each successive sub menu since you have already saved it in the last group you worked on which is below the one upon which you are now working.
Once you are at the top group you will then simply be able to delete the other sub menus that appear beyond the first one.

Nicola,
The Fact: It's all in the markup and the CSS.
The Problem: We are not privy to your markup and CSS and as such cannot help you.
The Solution: Supply a link to your site, or at the very least, copy and paste your code here
Gramps

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. help

My ipod warranty ran out a few months ago I have a nano 5th gen. The problem is that if I want to play a song it would show the album artwork for about 3 seconds and go back to the main menu with no music playing. It'snot the head phones or ear jack. Please I Need Help

See this Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/nano5gen/
Reset
How to reset iPod

HT1600 Since the latest up-date I can't see any movies. I always returns to the main menu. Is anyone else having this problem and how do I fix it?

Since the latest up-date I can't see any movies. It always returns to the main menu. Is anyone else having this problem and how do I fix it? We have gone 3 days without the use of renting movies.

Welcome to the Apple Community.
First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings). You should also try restarting your router.
If both of the above don't help, you should try a restore (Settings > General > Reset > Restore).

I cannot open itunes store from my iphone 4s. When I press the application icon it seems to be open at first but then automatically return to the main menu. What can be the problem?

I cannot open itunes store from my iphone 4s. When I press the application icon it seems to be open at first but then automatically return to the main menu. What can be the problem?

Logout of the app store and iTunes store: Settings>iTunes & App Store>Apple ID. Go back to home screen and reset the phone by pressing the sleep/wake and home buttons together until the Apple logo appears then release them.
Once phone has finished rebooting go back to Settings>iTunes & App Store and login with your Apple ID and password again. Then open the iTunes Store app again.

Canon Solution Menu Ex Driver

Frequently I have opened my laptop with Windows 10 64 bit, I keep on getting the message that the Canon Solution menu Ex driver is not istalled. Kindly assist. Jacob-Nairobi, Kenya.

Hello Mojoala.
For testing purposes, please temporarily disable any firewall or anti-spyware utilities on the computer. Then check to see if the program will open correctly.
If you continue to have difficulties, please contact our support group using the link below for additional assistance.
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I can't open any apps on my iPad. Everything goes back to the main menu. Anybody have a solution to this?

Has anybody got some advice? I can't open any apps on my iPad. Everything goes back to the main menu immediately.

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...

Problems opening edit mode from Main Menu in Elements 8

Photoshop Elements won't open in edit mode after the main menu comes up fine. The other choice, and I forget what that is because I never use it, DOES open up. I use Lightroom for 98 percenr of PP of photo files. I DO use Elements once in a while for a couple of tweaks. Anyway, I clicked debug and I read the following message:
error signature: appname:photoshopelements.exeAppver8.0.0.0 modname
Another time I tried to open the main window into edit mode, and it would not open into edit mode, so I clicked on debug and read this message:
c:\document~1\gregmc~1\locals~1\temp\2499_appcompat.txt
And yet another time I tried to open the main window into edit mode, and it would not open into edit mode, so I clicked on debug and read this message:
c:\document~1\gregmc~1\locals~1\temp\f717_appcompat.txt
Not sure what to do. I can always uninstall the entire program, and then reinstall.
One thing I did do, tonight, was uninstall the Adobe inspiration browser and then installed the update, as per the window prompted me to do when the program first loads onscreen. I thought maybe this was the issue, being lapse on updating something, But, I closed out the program post install, and then opened the program again, and was once again unable to open the edit portion of the program. Again, the other choice (window) works fine, though I don't use it. Only the edit portion of the program won't open up to use.
Thanks.

Christine,
Let's try to avoid the welcome screen and open the editor from a desktop shortcut:
For Windows (I have WIN-7), the path is:
C>Program Files (x86)>Adobe>Photoshop Elements 8>Right click on that>Send to>Desktop shortcut

Main menu - weird menu call problem

Here's how the DVD I'm currently building plays like this:
Copyright warning -> Logo -> Teaser Trailers -> Main Menu
When you finally arrive at the main menu, if you hit "Menu" on the remote is simply replays the teaser trailers again.
Can anybody explain why it's doing this, and how I can stop it?

As has been said - what you are seeing is the (quite normal) resume function. You can stop it from happening by either putting the teaser footage into a menu and not a track, then playing that menu instead, or by simply denying the user operation for the menu button when in the main menu.
You do the latter by clicking on the main menu icon in the outline view, then look in the property inspector, and switch to the 'advanced' tab. In there, put a tick in the box next to 'Menu Call' and it will prevent any use of the menu button whilst in the menu.
However, if you do this, be aware that the normal resume feature will be prevented - for example, if your viewer is in the main feature and presses menu, then uses the menu button again they will expect to go back to the main feature, but won't be able to.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Page Forward & Reverse buttons do not work & are "grayed-out" after upgrading to, as is the Main-Menu Items such as File-Edit-view etc...

After upgrading to Firefox 3.6.12 all functionality appeared to be intact. Then after a few days it lost the ability to "page forward" or to "page back" and are "grayed-out". Additionally, the Main menu items such as File, Edit, View, History, Bookmarks, Tools & Help are also grayed-out and non-functioning.
Also, the "Search Window" does not search, Web Searches need to be performed from within the URL window instead, for some crazy reason. If the URL window is blank when I enter a search into the actual search window the following appears in the URL window, "Search Bookmarks and History", which makes no sense.
I have noticed similar complaints in this Forum in the past but I have not seen any posted resolution to these issues. Is there a solution?

Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Canon Solution EX Main Menu problem???

Similar Messages

Maybe you are looking for