Canon Sx280 shuts down Windows Vista when trying to remove photos

This just started happening. When I cut and paste photos from camera to move to computer, Windows Vista shuts down. Anyone have this happen and know of a solution?

Hi jwalgren! Thanks for posting. Do you receive any error messages before your system shuts down? Are you on a laptop or on a desktop? Does this happen when you transfer the same images to other computers? If this is a time sensitive-matter, additional support options are available at Contact Us.

Similar Messages

Shuts down intermittently and when trying to boot to OS CD

This MacBook has me stumped and I've searched the forums and Google for hours.
Shuts down while using it intermittently, but will boot right back up. I can not determine if it is a bad logic board, hard drive, or something else. Have zapped the pram, rest the smu, used disk utility to repair permissions on the hard drive. In addition, when I try to run the hardware test DVD or techTools Pro DVD, the macbook reboots itself every time it gets to the initial hardware test screen (only flashes for a split second). I've tried the original system CD, techTools DVD and a retail OS X DVD.
Any ideas?

Ugh! Well I would start off with easy to test items such as a different battery, especially if you have access to one from a friend's MacBook. RAM and hard drive are also easy to swap out. The logic board is both expensive and a difficult repair.
Truthfully, if you get that far, it may not be economical to repair.
Best of luck.

Satellite U305 shuts down and reboots when trying to copy/paste

This is the oddest thing and hopefully someone here can help....
When I try to copy and paste, either through the use of the touchpad (right click, copy = right click, paste) or by using ctrlC/ctrlP, the laptop screen goes white, then shuts down and restarts. This only happens when I am using copy and paste.
Any thoughts? I have no idea why this is happening! Help!

Maybe this helps.
How to repair the operating system and how to restore the operating system configuration to an earli...
Which Satellite U305?
-Jerry

TS3274 i have tried all the above and my ipad shuts down all programs when trying to work or play with it

the other thing it is doing is when charging, it says it is not charging

1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.
3. Make sure you connect charger to wall socket.

Windows crashes when trying to sync photos

I'm a new Nano user and I finally got iTunes through my firewall, playing music, and synching with my Nano. I can load my songs and make playlists. So far, so good.
Today I've been trying to sync up to load pictures, but every time I do, Windows crashes. I've tried searching the support articles and couldn't find this issue before. I've been trying to sync it to a particular file with a select group of pictures: I've tried using different file and subfile locations and I've tried changing the size or number of the photos....but it still happens. Every time my Nano syncs with iTunes to include a photo sync, all of Windows crashes.
Is there something about the photo files (jpeg) that I should know or change? They're all about 300K and all have text names (not digits or symbols).
Any help appreciated.

hi Pegasus!
gosh, but this is a weird complex of symptoms that you're getting. i've actually seen then all before individually, just not in a clump together like this.
this will be a long post. i'm going to start with troubleshooting directly related with with the blue screen, and then after that i'll dwell on the itunes-launch-failures/photosyncing-relation angles.
0x0000001 (0x0000008, 0x0000008, 0x0000000, 0xBFF55036)
Driver IRQLNOT_LESS_OREQUAL
that can be a fiddly one to troubleshoot. i haven't seen any common denominators in itunes/ipod contexts with it.
(1) let's try to get the malware possibilities off the table. (i'm usually more worried about that with a 0x0000050, but you're getting a weird bunch of symptoms.) download fresh definitions and run vigorous virus and spyware scans. if your security software providers offer them, run some online scans as well. (they can sometimes pick up an infection even if the security software on the PC has been compromised.)
(2) have a check through your Device Manager (right-click "My Computer", select "Manage", click "Device Manager") to check to see if there are any warning/alert messages showing up next to any of your Devices.
(3) have a look through the MS Knowledge base to see if you can find any reported causes of the IRQL_... that look like they might be relevant to your box. sorry, there's a whole bunch of different things to sift through over there:
search on Driver IRQLNOT_LESS_OREQUAL
(4) let's also capture a minidump of the crash and send it to the Discussions Hosts, so they can throw it over the fence to the Apple engineers for a look.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
And then send it to a Discussions Host. It doesn't hurt to put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
itunes-not-launching/photosyncing
security software on the PC can be implicated with both of these ... i just haven't seen it associated with both sorts of symptoms at the same time.
Norton Internet Security 2005 is a common cause of error-message-free itunes launch failures, and i have seen it implicated in some odd syncing problems (just not with a BSOD on photosync.)
McAfee is sometimes implicated with odd problems with photosyncing (but not typically with the itunes error-message-free launch failures).
so let's try an experiment. if you switch your security software off prior to an attempt at a photosync, do you still get the blue screen?
love, b

I SCREWD UP AND SHUT DOWN MY MAC WHEN IT WAS IN THE PRIVLEDGES STAGE BECAUSE MY PLUG-INS FOR AFTER EFFECTS WASNT WORKING, WHEN I SHUT IT DOWN AND TRIED TO START IT BACK UP, MY MAC KEPT RESTARTING, TEST-RAN-ERROR..4MOT/1/40000003:HDD-14444? WAT IS THIS?

I SCREWD UP AND SHUT DOWN MY MAC WHEN IT WAS IN THE PRIVLEDGES STAGE BECAUSE MY PLUG-INS FOR AFTER EFFECTS WASNT WORKING, WHEN I SHUT IT DOWN AND TRIED TO START IT BACK UP, MY MAC KEPT RESTARTING, TEST-RAN-ERROR..4MOT/1/40000003:HDD-14444? WAT IS THIS? WAT DO I DO TO GET MY MAC BACK RUNNING

I believe you've posted this multiple times. Once is all that's needed. Also, please don't use all caps. Aside from the fact it means you're shouting it's also harder to read than mixed case.
The error means a bad fan motor or the HDD has failed. In your case it's the latter. You can try the following:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

My computer had to be shut down this morning when I could move my mouse around but it would not respond when I double clicked on an item to select. Now I cannot open a file in my finder window by double clicking on it. Any suggestions?

My computer had to be shut down this morning when I could move my mouse around but it would not respond when I double clicked on an item to select. Now I cannot open a file in my finder window by double clicking on it. Any suggestions?

Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC.

Skype Crashed when shutting down Windows with ASUS Xonar audio

This has been a problem for a while now. Various updates have (temporarily) fixed it only to have another update come along and re-break it. Every time I shut down windows 8.1 Skype prevents windows from shutting down because it's crashed and I have to click OK he get skype to go away so my system will shut down or reboot. It's quite annoying.

I checked this again and found out that the issue is still here.
I have an assumption that the issue is related to the hybrid power off mode, that was presented in windows 8. As you know, starting from windows 8, your windows never shuts down completely. Memory of the system session (ring 0) is dumped to the disk on windows shut down, and loaded on next windows start. This approach gives us less start up time, but works only if hardware not changed during the shutdown. When you restart your windows it shuts down completely and you can see the difference in a boot time. Because of this new mode windows creators moved some drivers from system session to the user session (printers etc).
When I disabled all sounds in the skype settings I got following behavior:error appears on shutdownerror doesn't appears on restart.

I am asked repeatedly if I want to shut down my computer when I do not. How can I stop this from happening?

I am asked over and over again if I want to shut down my computer now. No matter how many times I click "cancel" the box returns with the same maddening question. I'm using Lion on a Mac Pro. How can I get this to stop?

Perhaps the problem is that your Security setting is set to log you out immediately that your Sleep mode activates. And maybe your sleep setting is quite frequent.
Otherwise you may have set a shutdown timing in Energy Saver>Schedule that keeps repeating when you cancel the Shut Down window.
I haven't tried these yet and they are rather obscure, but they may be the software problems to check before servicing your hardware (keys and power button).

Not working right-will not let me type a new emall, pull contacts, also will not let me use wireless printer-kept shutting down windows.

firefox will not let me type in yahoo mail as new email. will not pull up contacts. also, when I use wireless printer-it shuts down windows.

Couple of points...
DJ_Jynxx wrote:
The thing is, this MUST be an Audition CC issue for two reasons. One, everything worked fine in CS6, which I was using right before I upgraded to CC. I even did a clean install of it by removing CS6 completely.
All versions of Audition can co-exist on the same machine quite happily - there is no interaction between them at all, and the system was designed to be like this. So there's nothing to stop you keeping CS5.5, CS6, CC and even Audition3 on the same machine.
The other thing I'm wondering about is Windows 8. There have been a considerable number of complaints about this doing weird things, including with Audition. I have a system that in many ways is very similar to yours, except that I don't overclock the mobo, and use a professional sound device (or two) with it (RME). The major difference though is that I use Windows 7 pro 64-bit, and I haven't had any of these problems at all. Yes I use it for a living, as well, but I don't bother with multiple DAWs - don't have time for all that these days. But I do use iZotope's RX software in its standalone mode without any difficulty.
I'm not claiming that Audition CC is trouble-free - any number of Mac users will confirm that - but people running it on W7 certainly seem to have far fewer problems with it. It may also be worth trying an uninstall-reinstall of CC - you never know. But differences in preview quality certainly point towards audio drivers, I'm afraid...

Virtualized servers get stuck at "Shutting down Windows Modules Installer service ..."

Hi,
I have a Windows 2008 R2 (no service pack) server that has been virtualized last summer and since then:
- Windows Update does not download any updates (it says Cancelled for every update in the Update History)
- When I reboot the vm, it gets stuck on "Shutting down Windows Modules Installer service ..." and I have to cold-Reset the vm to get it working again.
I tried running Windows Update Standalone Installer (Windows6.1-KB947821-v20-x64.msu) on the machine, but that gets stuck on "searching for updates"...
I tried stopping the Windows Update service but that doesn't work either, it says that the service is not responding...
I'm not sure what to try next, I'd appreciate any pointers.
Thanks a lot,
Guillaume

Hi,
Pls try to do the following to reset the whole
SoftwareDistribution folder:
1. Stop the windows Updates service. To do this, follow these ste
a. Click "Start", click"Run", type "services.msc" (without the quotation marks), and
then click "OK".
b. Right-click the "windows Updates" service.
c. Click "Stop". The service will take a moment to stop.
2.rename this folder(renamed to oldsoftwaredistruibution)
3. Start the windosw Updates service. To do this, follow these steps
a. Click "Start", click "Run", type "services.msc" (without the quotation marks), and then click "OK".
b. Right-click the "Automatic Updates" service, and then click "Start".
The service will take a moment to start and the folder will be recreated when you try to visit windows update site. You can then delete the folder.
After all, try to see whether your AU is functioning.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

After upgrading to lion, shut down window is appearing continually

hi :
after i installed the lion osx upgrade, i had a problem , a big issue .
when i'm using the laptop , the shut down window is appearing continually. and after about 10 min the computer shutting down automatically .
i tried to reset the smc.
but the issue still there.
i changed the hard disk and install the snow leopard osx.
i checked it again ,,,,,, nothing is happening .
so what could be the issue .??
by the way i did all software update after i finished installing my software's.
regards

I have the same problem. I use the Windows 7 on bootcamp partition and there all good, but when I go to mac partition the shutdown menu appears when I stop using the keyboard or trackpad and after 10 seconds off.

IMac 2010 randomly shutting down, only reboots when power cable is unplugged and replugged

Specs
It's a stock 21.5inch iMac mid-2010, with the addition of some extra RAM - two more 4gb sticks bringing it up to a total 12gb - that I've had installed for roughly 6 months with no problems.
No problems with my Mac since we bought it from the Apple Store until the last couple of days when this started happening. I don't have AppleCare and obviously I'm out of warranty.
Problem
Seemingly random shut downs. I've tried to work out if it's to do with overheating, but I've been playing some graphically intensive games today and that hasn't killed it. The strangest thing is that most of the shut downs are when it's not even in use - the next time I sit down to use it it has been turned off.
I don't think this is a software problem as it's been happening on the OSX and Windows partitions.
Nothing happens when I press the power button until I unplug the power cable, wait a few seconds, plug it back in again then press the power button. This makes me wonder if it's a problem with the power cable? Any tests I could run?
Any ideas? Tests I can run? Or is it a lost cause?
Thanks in advance!

After further testing, it seems to only be powering back on if I leave it unplugged for about 20 seconds. Is this something to do with resetting the SMC?

Software upgrade shuts down windows at 'boot ROM"

I have tried multiple times to upgrade to 4.5 device software from the desktop manager. It always shuts down windows...showing a blue screen, locks up my phone until I remove the battery.....then restart my laptop and it says it recovered from a "fatal error". Tmobile first told me to download latest version of desktop manager, which I did. I still have the same problem, then they told me it is my computer and couldn't help me. I have Windows XP w/latest updates. Anyone have any idea why this is happening? Thank you!

I am having this exact same problem my phone restarts when updating the software after boot ROM, then it says there has been a fatal error. it does this everytime i try update my software. so any help would be handy.

How do i sort out error r6034 on my windows vista when i try to start itunes, the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly,

how do i sort out error r6034 on my windows vista when i try to start itunes ???
the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly, P;ease contact the application's support team for more information.

Hey deepakmenonfrompune,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

Canon Sx280 shuts down Windows Vista when trying to remove photos

Similar Messages

Maybe you are looking for