Canon SX600 HS How do i change the shutter speed? Thanks

I need to change the shutter speed but manual is confusing
Solved!
Go to Solution.

If you need to change the shutter speed for a long exposure shot, you will need to be in the specific scene mode of the camera and choose the Long shutter mode. Then you can select a shutter speed. You cannot choose a shutter speed in other modes with that camera.
Steve M.

Similar Messages

  • How do you change the fan speed (rpm)

    On a mac, how do you change the fan speed to 7200 or something?

    As was mentioned, installing smcFanControl will do this:
    http://81.169.182.62/~eidac/software/page5/page5.html
    However, as others have indicated, you should determine what the issue is.  For starters, is your machine actually running hot?  Have you run something to let you know what the actual temperatures are?  Setting the fan at max speed will make your system noisy, will reduce the fan life, and significantly reduce your battery charge.

  • How do I set the Shutter Speed in Manual Mode on my EOS 70D

    I recently was forced to upgrade to a Canon 70D after my 50D died from a fall.  I am not happy with the ease of setting the Shutter speed while in Manual mode.  The only way I can currently set the shutter speed while in Manual mode, is to go to the info screen and set the shutter speed with the touch screen.  The manual states that I should be able to set the Shutter speed with the Main Dial, behind the shutter release. ( which is how it was on the 50D).  I can control the Aperture with the quick control dial.  The Function Lock button is off.
    I am sure this is do to some setting I have wrong, that is not allowing me to fix this issue, but I cant figure out what it could be after hours on the net and in the manual.  I would greatly appreciate it if someone could help me with this issue.
    Thanks
    Gene

    Another possible solution is to use a battery grip on your 70D and see if the dial on the grip will change the shutter speed.
    There are some discussions about this problem on some earlier models Canon DSLR. Check it out.
    http://www.dpreview.com/forums/thread/2638326

  • Hp dv9000(dv9​392ea) How do you change the fan speed settings

    Hi 
    I have now been looking for hours on how to change the fan speed settings for this laptop and all the things I have used do not work, has anyone been able to get it work or knows of away?
    Please let me Know 
    Thanks

    If you have a higher version it should include the earlier version settings.Usually each update is a rollup of previous changes plus newer.
    If you are having serious overheating problems I would use a laptop cooling pad with fan/fans. Also,a less radical approach to the mod posted above is drilling some air holes in the bottom of case where the GPU is located. Adding copper shims shown HERE  or HERE on his 'About ME' also keeps temps down.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How do you change the burn speed when making a CD?

    I have tried burning my iTunes purchases onto a CD, and when I try to play them back on my CD player, nothing happens. It will play back in iTunes on the Mac, but not on my CD player or in my car.
    I suspect it has to do with the speed at which they burn, but I have no idea how to change that?

    Check your similar post
    https://discussions.apple.com/message/18603508#18603508

  • Hello, i purchase from the web adobe acrobat pro for win instead for Mac how i can change the order ? Thank you

    I need to change my order but i don't  understand how to contact acrobat in rodder to do this, Actually i've Acrobat pro for win but i need the one for Mac
    Tks
    Franz

    If you purchased it from the Adobe Store on the web then you need to contact Adobe.  If you purchased it from another party on the web then you need to contact that third party vendor.

  • How can you change the aquisition speed?

    I have a vi that gets temperature as a function of time from a thermocouple (MCC). I want the temperature to be sampled at different times not just every 5 seconds. How?
    Message Edited by nicholas03 on 10-07-2007 04:43 PM

    Hi Nicholas3,
    I just want to verify that I understand your issue correctly. You are acquiring temperature data and want to slow you acquisition down, I am assuming that you are using a thermocouple and thus are using DAQmx to read said thermocouple. If this is correct the easiest way to accomplish this is to insert a wait into the acquisition loop. The wait functions are on the Timing palette. This will hold the loop for the specified number of milliseconds before allowing it to iterate. There is an excellent shipping example titled Cont Acq Thermocouple Samples-SW Timed.vi within this example this method of holding the loop is used. as illustrated in the screen shot from the example.
    What is happening is in the while loop a call to the DAQmx Read VI is made, pulling a single temperature sample from the DAQ device into PC memory. The while loop will then wait until the user specified amount of time has elapsed before iterating and pulling the next temperature sample from the DAQ device.
    Thanks
    Message Edited by jaced on 10-08-2007 03:31 PM
    JaceD
    Signal Sources Product Support Engineer
    National Instruments
    Attachments:
    SW loop timed.jpg ‏31 KB

  • How do I change the duration of photos?

    I have a series of approx. 20 photos that I would like to import into FCE in order to make a
    stop frame animation series... each photo about half a second each.
    How do I change the setting?
    Thanks.

    To change the default length of an imported still to 1/2 second, click the Editing tab in User Preferences, and set the Still/Freeze Duration to 15 frames.

  • IMovie 13 how do I change the speed of the Far Far Away title scrolling?

    How do I change the scrolling speed of the Far Far Away wording?
    Thanks in advance!!

    Thanks. I did try this and it slowed the scroll down. There is still a residual problem which is there is a certain amount of blank screen at the end. I thought slowing the scroll would fill this dead spot. By lengthening the duration of the title, the scroll is now slower, but the black screen has also lengthened.The current dead time is now the final 6 seconds of a 25 second title. Any help on cutting out the dead scrren time. If this were a straight video clip I would simply trim it away. Any way to get the scrolling text to fill more than 80% of the title duration?

  • Changing the EVB3 speed control

    How do I change the rotary speed control number on the EVB3 to accept controller change #82, which is what my Nord Electro is sending? I'm using the Electro as a MIDI controller for Mainstage, and I've got all three pedal jacks plugged in, but i don't want the sustain pedal to change speeds. What am I missing?
    Thanks,
    Stewart

    Duh...it's in the manual. Just change the Midi Mode in the EVB3 controls to NE (I think that might be short for Nord Electro)

  • How do I change the printer resolution?

    How do I change the printer resolution on my OSX 10.6.2 laptop?
    I have an ubuntu print server and it seems to only work at all using the gutenprint drivers. On my ubuntu client I had to change the print resolution from "auto" to 600x600 to make it work just fine.
    The best I can do is make the Mac print pages squished down to 1/4 size. I don't see the same resolution option on the Mac.
    Mac OSX 10.6.2
    Ubuntu Server 9.10
    Printer: Canon S900
    Cups driver: Canon S800 Gutenprint v5.2.3
    Cups version 1.4.2 on the mac
    Cups version 1.3.9 on Ubuntu Server
    Macbook Pro Mac OS X (10.6.2)

    I can't speak for the printer directly, but most functions to change resolution are in the dropdown menu at the bottom of the print dialog. It has a gray bar running through it separating the basic functions from the advanced settings.
    If you don't see that, but do see a blue button with a black triangle pointing down, click on that. Then you'll be able to set the advanced settings.
    Once you set up the printer the way you like, save it as a preset. If you want that as a default, see this [MacOSXHint|http://www.macosxhints.com/article.php?story=20100125135830153].

  • How do I change the raw image to jpeg with element 6

    How do I change the raw image to jpeg using element 6?  I am using a canon 10D camera.

    From the Editor choose:
    File >> Open
    Then navigate to your raw file
    When the image appears in the converter use the sliders to make your raw adjustments, then click open image.
    From the Editor use:
    File >> Save As >> jpeg
     

  • How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

    How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

    You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

  • How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

    How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

    You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • In Pages 5.0 How do I change the highlight color?

    In Pages 5.0 How do I change the highlight color?

    Oh!  I understand now.  See screenshot below.  It's called "Character Fill Color":

Maybe you are looking for

  • CLIENT_TEXT_IO : cannot insert new line into a text file

    Facts: Developer 10g AS 10g Web utility Problem: i am traying to Open a text file. using CLIENT_TEXT_IO.FOPEN insert a record in to a text file using CLIENT_TEXT_IO.PUTF insert a new line using chr(10) or CLIENT_TEXT_IO.NEW_LINE or CLIENT_TEXT_IO.put

  • Audio Not working in Windows Browsers

    I have a flash site that was designed using Flash CS3... this site contains an audio that starts playing in the background as soon as the person lands on the home page. This past week, I changed out the leading image and repackaged the site using Fla

  • Big problem with connection

    Hi, I have been working on an email application and i am having a problem with the speed of getting information from my sql database. When someone logs into there account all messages related to them from the database are loaded and then each message

  • Mobileme login problem

    I had a mobileme account and I didn't migrate it to icloud. Now when I try to login to icloud it redirects me to the mobileme site, which is closed. How can I login to icloud with this apple id?

  • ITunes 7 caused a kernel panic - cover flow suspected

    Ok so I haven't tried this a second time, but you can if you want. I was checking out the new grouped album cover view and noticing that some of the tracks on one album were showing up as two different albums. The artwork, artist and album name were