Canon Utilities Camera Window DC has encountered a problem and needs to close
I just purchased Powershot SX260 HS. I loaded the software and all works except the Camera Window. I keep getting the message encountered a problem and needs to close. I have tried uninstalling all of the software on my PC related to canon (this is not my first canon) and reinstalling the software that came with the sx260 but this did not work. Any suggestions?
Joel
Hi BrianT!
Please download the update to CameraWindow DC 8.8 from the Canon USA website below:
http://www.usa.canon.com/cusa/consumer/products/cameras/digital_cameras/powershot_sx260_hs#DriversAn...
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
Tunes has encountered a problem and needs to close
Has anyone encountered this problem with Microsoft? My iTunes suddenly stopped launching three days ago. I have done everything listed in support-msconfig troublshooting, uninstalled and reinstalled a dozen times and even cleared my Windows regedit folder of any related files. Everytime I click on iTunes I get the same Microsoft Error Report window :"itunes has encountered a problem and needs to close. We are sorry for the inconvenience. " I am angry and frustrated -please help!
Such a pesky problem that is! Anyway, start with looking over this: http://docs.info.apple.com/article.html?artnum=93976
I would use the Windows Clean Up Installer Utility to remove all references of iTunes and Quicktime on your PC. You can read about it and install it from here: http://support.microsoft.com/kb/290301/
I would also run a full spyware scan because certain versions of malware has been known to cause this issue that you have. If you don't have such a program, I would go get AVG Free anti-spyware. It's free and catches that spyware program and removes it.
Then I would try the install again, but save it to your hard drive and install it from there instead of running it over the net. Sometimes turning OFF your antivirus and spyware programs first helps. Sometimes they like to silently interfere with the successful download and install of iTunes believing its some sort of suspicious material. Keep me posted on your progress.
Rachyl -
The window has a screen showing photoshop elements 12 has encountered a problem and needs to close
How do I get rid of the window that says Photoshop Elements 12 Editor has encountered a problem and needs to close. It showed after weeks of use with no problems.
Fault bucket 19706014, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Photoshop.exe
P2: 11.0.2.0
P3: 4bf2d91c
P4: VanishingPoint.8BF
P5: 11.0.0.0
P6: 48d395f1
P7: c0000005
P8: 000000000004a430
P9:
P10:
Attached files:
C:\Users\Johnny\AppData\Local\Temp\WERB71F.tmp.WERInternalMetadata.xml
C:\Users\Johnny\AppData\Local\Temp\WERFBFC.tmp.appcompat.txt
C:\Users\Johnny\AppData\Local\Temp\WER9A4.tmp.mdmp
These files may be available here:
C:\Users\Johnny\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Photoshop.exe_e 4881f26a567c586252e8667502237add319ee67_0ccd2665
Analysis symbol:
Rechecking for solution: 0
Report Id: c3830bd2-e129-11df-a41a-000272ab905c
Report Status: 9 -
Windows Home XP - "iTunes has encountered a problem and needs to close"
Hello :
I just updated to iTunes 7.7.0.43 for Windows Home XP. The earlier version was working just fine. But last week I downloaded the update and although the program works fine, every time that I exit from this application I get an error message "iTunes has encountered a problem and needs to close." I went to the support site and did several things including creating a new ueer account to test whether user or system-specific (I cannot tell); re-installing the application; re-creating my library and play-lists; etc. But I still get the same error message. Otherwise the application works fine, plays music, imports music OK, etc. This condition only occurs a few seconds after I exit from the application. Can anybody out there help me ? I am at my wit's end with this annoyance ! Thanks.Whether or not this will be fixed by a software update depends on what the root cause of the issue is. I would recommend trying MSCONFIG, although I can understand your reluctance to do so. Is your computer currently in Normal startup mode? If so, and if Apple's MSCONFIG steps do not resolve your issue, you can easily revert to Normal startup using the utility. If your computer is currently in Selective startup mode, just make note of the changes you make so you can change them back after you determine whether MSCONFIG resolved the issue. If it does, I'd suggest using the utility to disable a few items at a time until you narrow down which is the cause of the issue. Then you can determine whether this is a startup item or service that you need to have running on your PC.
MSCONFIG for XP: http://support.apple.com/kb/HT1275
MSCONFIG for Vista: http://docs.info.apple.com/article.html?artnum=305415
You may also want to check and see if iTunes and/or QuickTime are running in compatibility mode. If the are, turn this option off and retry iTunes.
-Go to C:\Program Files\iTunes\
Right-click on iTunes.exe and click Properties
Click the Compatibility tab
Uncheck the option to run in compatibility mode
Click Ok
-Go to C:\Program Files\QuickTime\
Right-cick on QuickTime.exe and click Properties
Click the Compatibility tab
Uncheck the option to run in compatibility mode
Click Ok
Test iTunes again.
CG -
Microsoft Excel for Windows has encountered a problem and needs to close. W
i have the attached problem anytime i tried to open a BW query in excel:Microsoft Excel for Windows has encountered a problem and needs to close. We are sorry for the inconvenience", Please inform if there is a work arround, i have re-install excel , likewise SAP many times but nothing
Hi,
I would suggest you check with any other colleague if they are able to run the same or not. Running BEx report depends hugely on the front end capacity and performance. Please check if anyone else can run the same report, with the same front end RAM, then it might be the problem with your installation.
Also you can try with the latest patch for GUI s/w.
Regards,
Debasis. -
I completed a search for this problem here and other forums, and found very useful information, however, I still need help. My laptop is an HP Pavillion dv1000, Intel Centrino, Windows XP, 1.24G of RAM; Camera is a Canon 5D, shooting JPEG only.
After a couple of weeks enjoying a vacation in the Caribbean, it was time to load all the new pics in the computer. I removed the card from my camera and using windows explorer, downloaded all pics in MyPictures folder. I created a new folder for this trip, and while I was there, I decided to reorganize several folders from previous trips. I renamed and moved folders around, deleted pictures, etc. (I believe that all the changes that I made created my problem.)
Once I finished all the changes with my folders, I launched Lightroom (ver 1.4.1) with the idea of synchronizing the folders and start working on my new pictures. After apx 8 seconds, I got the message: Adobe Photoshop Lightroom has encountered a problem and needs to close. We are sorry for the inconvenience.
After a google search, I found a lot of potential answers to my problem, including this one, which I tried:
"It might also be worth trying a temporary test catalog, just to see whether it's specific to that catalog. To do so, go to File menu > New Catalog and create a new catalog somewhere easy - Desktop perhaps - and just try importing a few photos into that test catalog and see if you can get it to freeze. I'm wondering if the catalog's been damaged slightly by that initial unexpected close, and if so, we'll see if we can get that sorted out for you."
I did exactly that (created a test catalog) and I don't get the error. I am not clear on what does that mean. Could you help me understand it? What do I need to do to use my old catalog? Is it damaged? How can I fix it? Did I loose all the work that I did in my previous pictures?
If I go back to my original catalog, I still get the error.
Thank you in advanced for your assistance.
TonyTony,
Here's something you might try:
Create a new, empty catalogue and try File->Import from catalog... and specify your broken one as input. With luck the damage will be left behind.
If that doesn't work, try deleting or renaming your preferences file. Look here for its location.
And if that doesn't work, try deleting or renaming your presets folder. See that same website for details.
Let us know how you make out.
Hal -
Error: adobe acrobat elements has encountered a problem and needs to close
When I right-click to Convert to PDF or Convert to PDF and EMail for .xls, .xlsx, .doc, .docx, .pptx, .ppt, .pub, and .igx items (what I've tried so far), I get the following error: "Adobe acrobat elements has encountered a problem and needs to close". It works fine on .bmp .tif, .txt, .htm, and .jpg (what I've tried so far). I am not having problems printing to Adobe to convert, nor am I having problems creating a PDF within a program, and I'm not having problems converting from IE. I am using Windows XP Professional, Microsoft 2007, and IE 7. My Adobe product is Adobe Acrobat X Pro Version 10.1.2. What can I do to resolve this problem? Thanks.
No, I don't have an older version. I did a search on my C drive for anything that has a name of Acrobat Elements and came up with the following: (I'm hoping you can see this)
-
Photoshop CS6 has encountered a problem and needs to close
I just download cs6 photoshop, I can successfully download the program but when I try and open it up I get an error that tells me "Adobe Photoshop CS6 has encountered a problem and needs to close. We are sorry for the inconvenience." I uninstalled photoshop and re installed it hopping this would work but it didn't. This is the error signature that is pulling up. also ran adobe support advisor and it found no problems. My system is xp version 2002 with service pack 3
Not much luck I'M afraid tried to understand all that was there this is all I could come up with, dose it help at all?
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 70 68 6f ure pho
0018: 74 6f 73 68 6f 70 2e 65 toshop.e
0020: 78 65 20 31 33 2e 30 2e xe 13.0.
0028: 30 2e 30 20 69 6e 20 70 0.0 in p
0030: 68 6f 74 6f 73 68 6f 70 hotoshop
0038: 2e 65 78 65 20 31 33 2e .exe 13.
0040: 30 2e 30 2e 30 20 61 74 0.0.0 at
0048: 20 6f 66 66 73 65 74 20 offset
0050: 30 31 32 33 37 38 62 62 012378bb
0058: 0d 0a ..
Just came up with this also;
OS Name
Microsoft Windows XP Home Edition
Version
5.1.2600 Service Pack 3 Build 2600
OS Manufacturer
Microsoft Corporation
System Name
HAYWOOD
System Manufacturer
Compaq Presario 061
System Model
PX786AA-ABA SR1500NX NA530
System Type
X86-based PC
Processor
x86 Family 6 Model 10 Stepping 0 AuthenticAMD ~1999 Mhz
BIOS Version/Date
Phoenix Technologies, LTD 3.14, 3/9/2005
SMBIOS Version
2.4
Windows Directory
C:\WINDOWS
System Directory
C:\WINDOWS\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name
HAYWOOD\Compaq_Owner
Time Zone
Eastern Standard Time
Total Physical Memory
1,024.00 MB
Available Physical Memory
352.92 MB
Total Virtual Memory
2.00 GB
Available Virtual Memory
1.96 GB
Page File Space
2.26 GB
Page File
C:\pagefile.sys -
InterVideo WinDVR Application has encountered a problem and needs to close.
My TV Anywhere has suddenly stopoed working and the message "InterVideo WinDVR Application has encountered a problem and needs to close. We are sorry for the inconvenience." appears each time I try to open the program. MSI Radio works fine. I have uninstalled and re-installed the programe (originally MSIPVS now MSIPVS3). I did try to download the new Beta drivers just to try, but the zip file shows 0 bytes!
Has anyone come across this, or can anyone suggest what I can try to resolve the issue?
Many thanks in anticipation
GarethJeremy:
I should point out that I am much more confident with software issues. I am not a hardware person and have never attempted to open up the box!
Realtek is the card on the motherboard.
I hope this is the information required:
OS Information:
Property Value
OS Name Microsoft Windows XP Professional|C:\WINDOWS|\Device\Harddisk0\Partition1
Service Pack 2.0
OS Manufacturer Microsoft Corporation
Windows Directory C:\WINDOWS
Processor:
Property Value
Current Clock Speed 3000
Description x86 Family 15 Model 2 Stepping 9
Manufacturer GenuineIntel
Name Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory (RAM):
Property Value
Bank Label RAS 0 & 1
Capacity 536870912
Bank Label RAS 2 & 3
Capacity 536870912
Total Memory Deteced in Hardware: ~1024 MB
Memory Reported to Operating System: 1023MB
Disk Drives:
Property Value
Description Disk drive
Manufacturer (Standard disk drives)
Model Maxtor 6Y160M0
Media Type Fixed hard disk media
Size 163921605120 (~153 GB)
Number of Partitions 2
Description Disk drive
Manufacturer (Standard disk drives)
Model Canon MP Memory Card USB Device
Media Type
Number of Partitions
Description Disk drive
Manufacturer (Standard disk drives)
Model IC35L060 AVV207-0 USB Device
Media Type Fixed hard disk media
Size 61492193280 (~57 GB)
Number of Partitions 1
Installed Printers:
Property Value
Name PaperPort Color Image
Port Name BIPORT
Default False
Driver Name PaperPort Color Printer Driver
Name PaperPort Black & White Image
Port Name BIPORT
Default False
Driver Name PaperPort Mono Printer Driver
Name Microsoft Office Document Image Writer
Port Name Microsoft Document Imaging Writer Port:
Default False
Driver Name Microsoft Office Document Image Writer Driver
Name Generic / Text Only
Port Name LPT1:
Default False
Driver Name Generic / Text Only
Name Canon MP370 Series Printer
Port Name USB001
Default True
Driver Name Canon MP370 Series Printer
Name Auto Microsoft Office Document Image Writer on GARETH-14ETIB74
Port Name \\GARETH-14ETIB74\Printer
Default False
Driver Name Microsoft Office Document Image Writer Driver
Motherboard:
Property Value
Manufacturer MICRO-STAR INC.
Model
Name Base Board
Part Number
Product MS-6758
Serial Number 00000000
Version 2.00
BIOS:
Property Value
Manufacturer American Megatrends Inc.
Name Version 1.00
Release Date 20040324000000.000000+000
Version AMIINT - 10
Monitor:
Property Value
Description SyncMaster 173V/172V/173S/173B
Name SyncMaster 173V/172V/173S/173B
Screen Height 768
Screen Width 1024
Keyboard:
Property Value
Description Easy Internet Keyboard
Pointing Device:
Property Value
Manufacturer Logitech
Name HID-compliant Wheel Mouse
Sound Card:
Property Value
Manufacturer Creative Technology, Ltd.
Description Creative EMU10K1 Audio Processor (WDM)
Device ID PCI\VEN_1102&DEV_0002&SUBSYS_80661102&REV_0A\4&1F7DBC9F&0&08F0
Manufacturer Realtek
Description Realtek AC'97 Audio
Device ID PCI\VEN_8086&DEV_24D5&SUBSYS_75851462&REV_02\3&13C0B0C5&0&FD
Video Card:
Property Value
Adapter Compatibility NVIDIA
Adapter RAM 268435456
Description NVIDIA GeForce FX 5600XT
Installed Display Drivers nv4_disp.dll
Driver Version 6.14.10.6693
Driver Date 29/10/2004 16:50:00
Video Mode Description 1024 x 768 x 4294967296 colors
DirectX Installation:
Property Value
Version 6.03.01.0146
Modem:
Property Value
Network Adapters:
Property Value
Description Intel(R) PRO/1000 CT Network Connection - Packet Scheduler Miniport
Description Packet Scheduler Miniport
Description Microsoft TV/Video Connection
Description 1394 Net Adapter
Description 1394 Net Adapter
External Ports:
Property Value
External Reference Designator Def
External Reference Designator Sanjoy
Expansion Slots:
Property Value
Slot Designation PCI1
Slot Designation PCI2
Slot Designation PCI3
Slot Designation PCI4
Slot Designation PCI5
Slot Designation AGP
Copy To Clipboard
I do very much appreciate the help from you all!
Gareth -
Getting "adobe Reader has encountered a problem and needs to close
On Windows XP service pack 3. Adobe Reader X
Get "Adobe Reader has encountered a problem and needs to close." . I have uninstalled adibe and reinstalled it and problem came back within 2 weeks after working for a short time.Try the following:
Uninstall Adobe Reader X
Reboot your computer
Delete directory C:\Program Files\Adobe\Reader 10.0
Download the EXE or the MSI installer from ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.0/ and execute e.g. either of the following files:
AdbeRdr1010_en_US.exe
AdbeRdr1010_en_US.msi
Good luck! -
Adobe Acrobat 9.0 has encountered a problem and needs to close
Hi!
I'd like to start using Adobe Acrobat 9.0 with Acrobat.com, but I don't get very far before I get the error message "
Adobe Acrobat 9.0 has encountered a problem and needs to close." This happens after I click "distribute form" and fill out the email addresses. It get to the point of starting to publish the response files and then the error message pops up and I can't go any further. I've made sure to uninstall older versions of Acrobat and I restarted my computer. I have a PC and am running Windows XP and IE 7. Help!Bill:
Thanks for all the tips. Actually I already did most of this (multiple times) to no avail.
· I’m running Win XP Pro SP3 on a Dell Latitude D630 laptop with 2GB memory.
· I Bought Acrobat 7 Standard (it came bundled with my scanner) so I do have that CD and the key
· I purchased the upgrade to Acrobat 9 Standard on-line for $99.
· Actually, everything was working fine until I uninstalled ATM. (I did that because my laptop wouldn’t undock or hibernate and I read that ATM could be the cause.)
· I’ve done several repairs from Control Panel. Didn’t help.
· Finally, this morning I decided to uninstall everything and install a trial version of Adobe 9 PRO from their web site. That didn’t work either.
· I notice that none of these actions has brought ATM back. On the other hand, I can’t find a place from where I can download ATM either.
Here’s the really funny thing. Acrobat is not completely broken. I can actually get it to work for the first few seconds. And if I type real fast, I can even save the pdf file that it opens before it crashes! For example, if I click on a pdf file on a web page and it is small enough that it opens right away, I can click the save button and hit OK immediately (don’t mind where it saves the file, I can find and move it later) before I get the “Adobe Acrobat 9.0 has encountered a problem and needs to close. We are sorry for the inconvenience.” message. The same happens if I just open Acrobat and let it sit. It doesn’t crash immediately. It takes about 5 seconds before it does.
This should give a clue as to where/why it is crashing.
Tomorrow I’m going to try and get Adobe on a chat line and have them take a look.
Let me know if you get any other good ideas. Thanks for taking the time to reply.
Thanks,
Jamshed Mulla -
Adobe Premiere Elements 9 has encountered a problem and needs to close.
Adobe Premiere Elements 9 has encountered a problem and needs to close. Asked to be debugged no response an then the program don not respond.
If i Run an old project direct from the file PE 9 it works and then go to a new project it works but from the start up it just closes down.
Bridge is also starting to do itFrom the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Are you using an account with Administrator Privileges?
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us -
Alright so basically, my parents got a buy-one-get-one-free offer on webcams at christmas, and so they gave me one for my own as i lost my old one. Everything was working fine, seemed like a great camera.
However, randomly one evening when i tried to open Live! Cam Center to record a video, it refused to open, instead giving me a small white box with the loading symbol inside (thats where live! cam center usually opens out into the UI) and a boz saying "LiveCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience.".
Now i thought that it was just a random one-off thing, but it happens EVERY time, WITHOUT fail. The cam works fine on MSN and skype etc, just when i try to record anything or manually take pictures , cam center doesn't work. And it doesn't seem to just be cam center, almost every software i've tried for just plain recording/capturing failed.
Tried updating to latest drivers and software, tried using older versions, tried using the cam from my family pc (identical cam) - failed, tried using all different USB ports randomly, failed. I'm really desperate here now, i'm at the point where i'm almost going to give it away and buy a non-creative webcam cos its really annoying.
My webcam is the Live! Cam Video IM Pro. Here's a copy of the error report from windows, its the same every time:
AppName: livecam.exe AppVer: 2.2.3.0 ModName: ctvidcap2.dll
ModVer: 2.2.3.0 Offset: 00002ca
PLEASE HELP! IM DESPERATE >_See if there are any Crash Reports ID's saved.
Type '''about:crashes''' in the Location Bar and hit Enter.
Then open each Crash Report and once the report is loaded completely, copy and paste the URL of each report into the the '''''Post as Reply''''' box in this thread.
IMO, seeing that you are using WinXP, you might be better off with the older Flash 10.3.183.90 version. Flash 11.0 and later have "improvements" that don't work on WinXP - only Vista and later. Adobe did continue to support and provide security updates for Flash 10.3 until a few months before WinXP went EOL back in April of this year. -
QuickTime Player has encountered a problem and needs to close. [error]
*Error message:*
QuickTime Player has encountered a problem and needs to close. We are sorry for the inconvenience.
*Error signature:*
EventType : BEX P1 : QuickTimePlayer.exe P2 : 7.60.92.0
P3 : 496279cc P4 : QuickTimePlayer.exe P5 : 7.60.92.0 P6 : 496279cc
P7 : 0000130d P8 : c0000409 P9 : 00000000
*Error report content:*
C:\DOCUME~1\MyUserID\LOCALS~1\Temp\WER1cc6.dir00\QuickTimePlayer.exe.mdmp
C:\DOCUME~1\MyUserID\LOCALS~1\Temp\WER1cc6.dir00\appcompat.txt
This problem is same as reported here and hasn't been solved:
http://discussions.apple.com/thread.jspa?threadID=1370493&tstart=1397
I have seen this problem appearing on Windows 2000, XP SP2 and XP SP3 with all QuickTime 7 versions (can't tell about iTunes since I don't use it), it didn't bother me because I have no use for QT/MOV myself.
but.
I have just installed your latest QT Player 7.60.92 and it craps out with the same error whenever I want to open .mov files.
And I have downloaded few trailers ranging from small resolution up to highest "HD" resolution from your own Apple website to make sure it is not some encoding compatibility issue.
I know it is a bug in QT Player itself, so don't tell me please that "my QT got fragmented" or such BS (like the replies suggested in the other thread) or ask about any QT alternative corrupting "official" QT Player since I have no such thing. I am trying to make it work on my mother's computer with freshly installed WinXP (prior updated up to latest patches), machine has standard 32bit intel single core CPU (2.8GHz, 2GB of RDRAM).
I am really sorry I bought her camera that take those stupid .mov QT videos.
Apple folks, what's the catch?
With every crash it creates in user temp directory files like:
QuickTimePlayer (2009-03-15 16.06.49).dmp
+ folder like WERf743.dir00 with files inside:
appcompat.txt
manifest.txt
QuickTimePlayer.exe.hdmp
QuickTimePlayer.exe.mdmp
appcompat:
Well, too big to post here (~190kB of text) and anyways it just lists files/versions from what I've seen, so its probably irrevelant
manifest:
Server=watson.microsoft.com
UI LCID=1033
Flags=1674066
Brand=WINDOWS
TitleName=QuickTime Player
DigPidRegPath=HKLM\Software\Microsoft\Windows NT\CurrentVersion\DigitalProductId
ErrorText=If you were in the middle of something, the information you were working on might be lost.
Stage1URL=
Stage1URL=/StageOne/Generic/BEX/QuickTimePlayerexe/7_60_92_0/496279cc/QuickTimePlayer_exe/7_60_920/496279cc/0000130d/c0000409/00000000.htm
Stage2URL=
Stage2URL=/dw/GenericTwo.ASP?EventType=BEX&P1=QuickTimePlayer.exe&P2=7.60.92.0&P 3=496279cc&P4=QuickTimePlayer.exe&P5=7.60.92.0&P6=496279cc&P7=0000130d&P8=c00004 09&P9=00000000
DataFiles=C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00\QuickTimePlaye r.exe.mdmp|C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00\appcompat.txt
Heap=C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00\QuickTimePlayer.exe .hdmp
ErrorSubPath=Generic\BEX\QuickTimePlayer.exe\7.60.92.0\496279cc\QuickTimePlayer. exe\7.60.92.0\496279cc\0000130d\c0000409\00000000
DirectoryDelete=C:\DOCUME~1\My-User-ID-here\LOCALS~1\Temp\WERf743.dir00
/edit
Yes, same as in the other thread from year ago, the QT/.mov files play fine in the browsers (I have just check on IE7, Firefox, K-Meleon).
Message was edited by: -888-Look, I had it running _few times_ too until it crapped out and gives the error since (on my own other computers - which I don't care since I have no use for any QT/.mov myself, but I repeat from post 1: I need it working on my Mother's comp).
And talking about 'bad drivers' - yes, I know that the drivers are sometimes at fault and bad drivers can make entire windoze pc unstable or crash; but how can you suggest this as a cause in this case when I'm telling you that the same error appears on completely different machines? And wouldn't this error appear from begining, from very first use of QT Player if it were bad drivers? Sure it would if it was faulty driver, but since it didn't that's not the case obviously.
Another pointer that it is NOT drivers related problem is that all other audio-video programs work fine, without errors and problem-free on the same machines, including playback of some of the .mov files with Media Player Classic or VLC - while they crap out with QT Player. If it was any of the drivers for audio or video, directx acceleration, etc - the faulty driver(s) should and would affect other programs as well. Yet all of them work fine and as I said - some even play QT files too (the ones capable of).
/edit:
Just to test it I "caved in" and I have installed entire iTunes 8.0 garbage (as suggested by foobula earlier) since I couldn't get just QTPlayer part of it to install separately, and what do you know:
LO & BEHOLD! same .mov files play fine with QT7, no errors, no problem! (I have opened/closed same .mov files many times).
Then I uninstalled iTunes and all of its junk,
removed any traces of it (because it left out - in a Microsft style - plenty of garbage in registry, user appdata folder etc),
rebooted,
installed the "standalone" QT Player 7.60
and hello Apple my darling! - same error is back after just 2 playbacks of very same .mov files!
(I used Apple's own .mov trailers for testing just to make sure I have "right" quicktime files:
http://movies.apple.com/movies/weinstein/inglouriousbasterds/inglouriousbasterds -tlr2_1080p.mov
and
http://movies.apple.com/movies/weinstein/inglouriousbasterds/inglouriousbasterds -tlr2_480p.mov
- and I repeat: both played once each fine (haven't play till the end though, but I'm sure that doesn't matter since the problem appears from the start)
What better proof you need that the problem is only with QT Player in a "standalone edition" (or whatever Apple calls it) and not with any drivers etc?
As previously, both play fine when links opened in a browsers (so the QuickTime whatever-components responsible for audio and video rendering WORK FINE and its not any "bad drivers" problems, it is just QT Player application's problem)
Again: (I hate to repeat myself)
*I don't want any itunes or other junk,*
*I just want .mov files to open with quicktime player - no more or less.*
Message was edited by: -888- -
Reports Builder has encountered a problem and needs to close.
Hi All,
The report builder in my system is behaving weirdly. If I open a report, which is having a normal browser output, it allowing me to see the data model, layout model and everything. And if I open a report, which is having a PDF output, it's not allowing me to open the Layout.
Here the output is in context of Oracle Applications front-end. And as I know it shouldn't be a problem with Report Builder.
It errors out with the following message.
Reports Builder has encountered a problem and needs to close. We are sorry for the inconvenience.
And the error report contains the following message.
AppName: rwbld60.exe AppVer: 3.0.0.0 ModName: mmc60.dll
ModVer: 0.0.0.0 Offset: 0000c533
Here is the version information:
Report Builder 6.0.8.11.3
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.11.0
Oracle ORACLE PL/SQL V8.0.6.0.0 - Production
Oracle CORE Version 4.0.6.0.0 - Production
Oracle Tools Integration Services 6.0.8.10.2
Oracle Tools Common Area 6.0.5.32.1
Oracle Toolkit 2 for Windows 32-bit platforms 6.0.5.35.0
Resource Object Store 6.0.5.0.1
Oracle Help 6.0.5.35.0
Oracle Sqlmgr 6.0.8.11.3
Oracle Query Builder 6.0.7.0.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 6.0.8.11.3
Oracle Express 6.0.8.3.5
Oracle XML Parser 1.0.2.1.0 Production
Oracle Virtual Graphics System 6.0.5.35.0
Oracle Image 6.0.5.34.0
Oracle Multimedia Widget 6.0.5.34.0
Oracle Tools GUI Utilities 6.0.5.35.0
I have tried reinstalling the software a minimum of 10 times, but no luck. At last I got my system formatted and tried. For the first time it worked for me, then I installed Forms Builder... then again I am getting the same problem even though I have different homes for Reports and Forms.
Is it problem with my system or the Operating System or the version of the Oracle Developer?
Can anyone please help me out?
Thanks in advance,
Lakshman.I have been having a similar problem and do not know if this will apply to your situation but I found the following on Metalink.
Subject: Reports Builder Crashes Opening the Paper Layout on Large Reports on XP/2003
Doc ID:
Note:566304.1 Type: PROBLEM
Last Revision Date: 18-AUG-2008 Status: PUBLISHED
In this Document
Symptoms
Changes
Cause
Solution
References
Applies to:
Oracle Reports Developer - Version: 10.1.2.0.2 to 10.1.2.3
Microsoft Windows XP
Microsoft Windows Server 2003
Symptoms
Oracle Reports Builder crashes opening the Paper Layout on some large reports but ONLY on the following platforms:
Microsoft Windows XP Professional
Microsoft Windows Server 2003
Reports Builder displays the below message and then crashes:
Reports Builder
Reports Builder has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were in the middle of something, the information you were working on might be lost.
Please tell Microsoft about this problem.
We have created an error report that you can send to us. We will treat this report as confidential and anonymous.
To see what data this error report contains, click here.
[Send Error Report] [Don't Send]
--> click on [Don't Send] button and Report Builder disappears.
-and/or-
access violation in oranls10.dll
This problem does not reproduce on:
Microsoft Windows 2000
The solutions in the below note do not work on v. 10.1.2.2.0 and 10.1.2.3.0:
Note 361206.1 Title: Reports Builder Crashes Opening a Paper Layout on Windows XP Only
Changes
Upgraded to Oracle Report Builder v. 10.1.2.x.x from a previous release.
Cause
Bug 7014048 is fixed in one-off Patch 5335195 (Base Bug) but missed inclusion (ie. was not ported to) in latest Developer patchset v. 10.1.2.3.0
See also:
Bug 7014048 Abstract: REPORTS BUILDER CRASHES OPENING A PAPER LAYOUT.
Bug 5029530 Abstract: REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL ONLY ON XP BOX
Solution
To implement the solution, please execute the following steps:
1. Download one-off Patch 5335195 for v. 10.1.2.0.2 to the XP/2003 box.
2. Back up existing uiw.dll for 10.1.2.3 880KB 10/10/2006 7:23PM --> uiw_orig_10.1.2.3.zip
3. In the %ORACLE_HOME%\bin directory, replace uiw.dll (880KB) with the uiw.dll (1,316KB) from
Patch 5335195 --> 1,316KB 7/24/06 11:12PM
4. Re-launch Report Builder 10.1.2.3.0 on XP/2003.
5. Open the <large report>.rdf.
6. Double-click on the Paper Layout icon.
7. The result should be: Successfully open the Paper Layout for <large report>.rdf.
References
Bug 5029530 - REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL ONLY ON XP BOX
Bug 7014048 - REPORTS BUILDER CRASHES OPENING A PAPER LAYOUT.
Note 361206.1 - Reports Builder Crashes Opening a Paper Layout on Windows XP Only
Patch 5335195 - REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL DUE TO ACCESS
Maybe you are looking for
-
JavaMail - HTML with images - Images show up as both inline and attachment
Hi, I am writing a program to send email which have 1. HTML template which references images via the content-id mechanism 2. A PDF document The mails are being rendered properly in Outlook, Gmail and Yahoo (the images show as inline and the PDF as at
-
Connect to EAP-FAST corporate network
Hi. I'm trying to setup my new macbook to connect to my company's wireless network but no luck. Here are the details from my WinXP laptop's Intel PROSet profile: +Enterprise Security:+ +Wireless Network Name (SSID): protected+ +Network Authentication
-
Dear Experts, Can anyone explain complete move out process, while im dng move out iam getting error as no device found, no contract found, if is there all ready MR reason 22 exist, then if i do move out does it allow? or do i need to reverse that MR
-
When I start Mac, I get following error regarding JRE requirement. I have updated JRE 8 from Oracle website, but I still get the same error. This has started after I updated to Yosemite. Also when I click on video I get following error: "A necessary
-
I am getting following compile error on the "GET ZSFLIGHT" command line in my program. error -> ZSFLIGHT is not defined for the current logical database. I went to SE36 and created a structure with the name ZSFLIGHT in which both the root node