Canon Vixia HF R20 - How do I turn off the date display?

How do I turn off the date display on my Canon Vixia HF R20? I do not want the date on my videos. I searched the manual and googled it and can't find an answer.

Hello DaisyKary,
When shooting with the VIXIA HF R20 you would be able to turn off most of the displays by pressing the [DISP. Batt. Info] button through a cycle.  It will change what is displayed on the camcorder's LCD panel.
If this is an urgent technical support matter I would urge you to contact Canon technical support directly for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • HT1430 How do I turn off the data when I am not in a WiFi location? I noticed that I am using data when the phone is "on" and I am not in a WiFi situation, but not on the internet. So, how do I turn off the data?

    How can I turn off the LTE data when I am someplace where there is not WiFi and I do not want my LTE running up a bill? I have tracked my usage and realize that the LTE is being used even when I am not using it, just because the phone is turned on.

    Merely being on should not use any data.  You must have something running - something using push notifications, or push email, prhaps?
    So, you can either track down what is using the data and change it, or you could go in and disaple cellular data in your settings.
    One other thing to check is
    Settings -> General -> About -> Diagnostic and Usage data -> set it to "Don't Send"
    Settings -> Restrictions -> Location Services -> System Services -> turn all these "OFF" (this will not affect how you use your phone at all, but will stop any outgoing location information being sent periodically back to Apple).

  • How do I turn off the external display screen on my MBP even after I disconnect the second screen?

    I connected my MBP to my television via the HDMI port to watch a movie. Whenever I have a second display connected I have different wallpapers for each screen. After the movie was over I disconnected the cable and started surfing the web, and I always have safari full screen so I have to three finger swipe to go back to my desktop. After disconnecting the hdmi cable, the external display screen became part of the three finger swipe in full screen mode. I can swipe to go from safari to second display screen (not connected to anything) and then to my desktop.
    My question is how do I get rid of the dog-gone external display screen? I am getting tired of having to swipe more than once from full screen to my desktop.

    Disregard this question, I figured it out. I just had to go in a delete the other desktops that showed up, how they got there in the first place, I'm not sure but I will visit the apple store to ask some questions.
    Mods you can close and/or delete this whole convo.

  • How can I turn off the price display in the Book module?

    I would love to use the book module to design wedding albums with my clients, but with my cost splashed all over the screen I can only imagine the negotiations that will happen over the price I'll be charging them!  What I need is to be able display the client price,  something allowing a mark-up percentage would be great, however for now I would be happy just to turn it off.

    johnbeardy wrote:
    Adobe have stated elsewhere why they initially went with Blurb (worldwide coverage, customer profiles) and that there are mechanisms for other book publishers to come on board.
    John, with all due respect (and I do have the utmost respect for your opinion and your contributions here and elsewhere) that just doesn't stand the litmus test. Could you please pont out another Adobe authored application that is so restrictive as to what can be exported. Or so restrictive as to document size and customization to the point where I must either use an outside application or wait patiently for vendors "to come on board" in order to achieve my desired customization? Other than Flash of course ... even then Adobe has gone to great lengths of late to make output from that app much more versatile with conversion options to other devices.
    Let's experiment with the other modules and see if your information about Adobe's methods for the Book module holds water:
    Develop Module:
    "Adobe have stated elsewhere why they initially went with Nikon (worldwide coverage, customer profiles) and that there are mechanisms for other camera makers to come on board."
    Print Module:
    "Adobe have stated elsewhere why they initially went with Epson (worldwide coverage, customer profiles) and that there are mechanisms for other printer manufacturers to come on board."
    Web Module:
    "Adobe have stated elsewhere why they initially went with Internet Explorer (worldwide coverage, customer profiles) and that there are mechanisms for other internet browser developers to come on board."
    Slideshow Module:
    "Adobe have stated elsewhere why they initially went with WMV (worldwide coverage, customer profiles) and that there are mechanisms for other video file options to come on board."
    As I have shared elsewhere, when I want to design a custom size for a book in Aperture 3, I simply select Custom, type in the dimensions and margin sizes and procede to lay out the book. Once completed, I can export the book to the favored vendor (Which could be Blurb for all I know), export to PDF, Export the pages or spreads to TIFF or JPEG ... and all this in one of those terrible restrictive, limiting and "closed" Apple software options ...
    I'm sorry, but the Book module in it's current form is almost a total non-feature for many users. Adobe simply got it wrong. I expected much more from them and was willing to pay for it. Half-measures are not sollutions. Unfortunately for Adobe, I only invest in sollutions not more workarounds.

  • Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

    Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

    Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

    How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

    To disable that feature it will depend on whether or not you sync everything in the cloud using Apple's iCloud, OR if you both use the same desktop/laptop computer with iTunes. Here is a link to the Apple support page in regards to the automatic download feature included with your iPhone and corresponding softwares such as iTunes.
    http://support.apple.com/kb/ht4539
    Follow those instructions and it will all be taken care of.

  • How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit our company's needs.
    The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
    Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our own application-based security module?
    2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
    At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

    hi,
    1.You can write your own realm in 61 which can plugged for your security
    calls.
    2. once you write your ownrealm.. you can access it through weblogic
    api/ur api..
    thanks
    kiran
    "Richard Koudry" <[email protected]> wrote in message
    news:3dd0d081$[email protected]..
    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit ourcompany's needs.
    >
    The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
    to change their password when these expire after 30 days.
    >
    Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
    the answer we got back, was.
    >
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our ownapplication-based security module?
    >
    2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
    these expire?
    >
    At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
    could advise me on how to turn this default security off so that we can
    write our own security module.

  • How do I turn off the annoying voice on Apple TV.

    How do I turn off the very annoying voice to come on when I use Apple TV. I did not have this when I first set it up but had to reset the apple tv as my Netflix wa not working?

    settings > general > accessibility > off

  • How do I turn off the requirement to enter my password everytime I want to delete a file in Finder?

    How do I turn off the requirement to enter my password everytime I delete a file in finder?

    Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
    1. Triple-click anywhere in the line below on this page to select it:
    ~/.Trash
    2. Right-click or control-click the highlighted line and select
    Services ▹ Show Info in Finder (or just Show Info)
    from the contextual menu.* An Info dialog should open.
    3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
    4. In the General section, uncheck the box marked Locked if it's checked.
    5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
    6. Close the Info window and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • How can I turn off the yellow pop-up tool tips?

    Howdy,
    I have searched high and low in the preferences and found nothing that does the trick. How can I turn off the yellow pop-up tool tips?
    See attached screen shot. They are incredibly annoying. It's probably obvious, but I cannot find it anywhere on internets or this forum.
    Thanks!

    Thanks Nancy. Unfortunately that doesn't do it. I turned those off awhile back. Nor can I find anything under VIEW that seems to make a difference.  Just FYI: I'm on a Mac OS w/Dreamweaver CS6 - but this has happened on previous versions of DW. Thanks again.

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset?

    I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset/earphones?

    Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

  • How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn- the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign.

    How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn-off the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign but in this version I could not do so and my iPad appears slower.

    Close inactive apps
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe the app's windows upwards to close
    3. The app will fly off the screen

  • I downloaded the os7 and now I have to sign in ever time I turn on my ipad. How do I turn off the password

    How do I turn off the password every time I turn on my ipad. I have the new os7 installed.

    Settings, general, passcode lock, enter passcode, turn passcode off.

  • How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

    How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

    An alternate method is Accessibility Settings when connected to iTunes. You should be able to turn it off there. I would also check out some of the answers listed to the right of this post and see if they can help.

Maybe you are looking for