Canon XF100 HD - Does it's Codec Work in FCPX

I'm shooting a job with the
Canon XF100 HD it's format is Canon XF Codec
Does that codec work in Final Cut Pro X without any conversions?
I've looked at the supported Codec list for Final Cut Pro X and the Canon XF Codecis not listed. However neither is another camera I use and that camera's codec works fine.
Your feedback is much appreciated.

It works well in Lion as long as you have the plug-in from Canon installed.
Good luck.
Russ

Similar Messages

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either. I get an error message with multiple suggestions but none of them apply to my situation.
I am so dissatisfied with this printer. I'm sorry I got it from Amazon because now it is a hassle to return it. I will never buy another Canon.
The printer menus are confusing. I hate using it. I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model. Never again. Stick with cameras.
Marcy Hotz

This note won't be as angry and frustrated as the last one...
Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer. I deleted all the old stuff.
I also had several scanning applications on my drive which just confused me.
When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which). So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
It works now. So I'm satisfied, will keep this maching. I just had to take some time, sit down and focus on the problem.

I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

If you had given us sensible information, I could look it up for you if your efforts fail.
Right now, I don't even know if you are on a Mac or on a Windows box.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Codec settings for uploading Canon XF100 footages to Vimeo

I use a Canon XF100 camera and I want to upload the footages to Vimeo.com, what’s your recommend on the codec I should use?

Mp4 will be the universal format. I am using the H264 encoder in Pavtube with HD resolution. The program I use is Pavtube HD Video Converter for Mac.
You can get a free trail from below.
http://www.pavtube.com/hd-video-converter-mac/
Edited by: 966455 on 2013-4-4 上午4:02

Importing Canon XF100

I have a brand new iMac 27" with the latest version of FCPX installed. I am trying to import the media from the 32GB flash card from a Canon XF100. FCPX does not recognize the media.
I researched many threads, all leading me to download a Canon XF Utitlity Software
When I go to this site, it tells me that "There is no - software for the OS Version you selected."
I have the latest version of Mavericks
I tried downloading the version for 10.8 but nothing happens when I try to install the software. It just says "extracting" files and then the launching window disappears. I searched my computer for the extracted files...they are nowhere.
I do not want to use 3rd party software, so I appreciate the advice but would rather not go that route.
What am I doing wrong? Why can't I find this software?
Any help/advice will be appreciated.
Mike K.

Hi
I don't know if it will work for you since things could be different from one country to another, but Canon Australia sent me this link and it worked for me.
http://support-au.canon.com.au/contents/AU/EN/0200247102.html
Cheers

Canon XF100 and full HD recording

Hello,
I am Canadian videographer established in Hawaii for a while and I am developing a project. I want to make Hawaii known to Canadian via Skype. It is a new concept of reality show where people can follow me in Hawaii in real time and ask me questions. It would be a premiere in the reality show world. You are welcome to financially support the project (around 900$). It could be an awesome way to promote how Skype can be powerful. But now, I need your help to make it a success. I use a Canon XF100 and a MacBook Pro 2011. I want to use the Canon XF100 as an external HD camera on the MacBook Pro for his features, his XLR quality sound and the Full HD video. I tried to add the link to the diagram but it says "it is not a valid URL" then it is... So, here are the details:
The MacBook Pro settings: Skype 5.8 + Mac OS X 10.7 + 2,2 GHz I7 + 8G RAM + 256 SSD hard disk drive.
What I want to do:
- Use Clear Hotspot for wireless internet (with G4 and G3).
- Connect the Canon XF100 to BlackMagic Design via HDMI.
- Connect BlackMagic Design to MacBook Pro via Thunderbolt.
- Connect the headset to the MacBook Pro via USB.
My questions:
Does Skype recognize Thunderbolt connection from the BlackMagic Design?
How can I record audio from the headset microphone, from people questioning and from the Canon XF100?
How can I record Full HD chat video from Skype (Ecamm can’t do that)?
I look forward to having answers from you as soon as possible. Thank you.

Yes. with it's newer cameras, (T4i, T5i, 6D, 70D,5D3,etc) Canon gets around this by allowing you to continue past 4GB but the video is automatically split into separate files. This means you will need to edit the movie back together in post processing.
Magic Lantern does not degrade your video quality. It can actually improve your quality thanks to all the options it adds, but it does not allow you to exceed the 4GB limit.
Magic Lantern has an "Movie Restart" option to go past 30 mins. The camera will stop after 29.59minutes, but will restart in less than a second, so you don't lose very much and you don't need to touch the camera for that, as it will work automatically.
Mike Sowsun
S110, SL1, 5D Mk III

Media Encoder won't import MXF files from Canon XF100

I'm running Media Encoder CC on two laptops: a macbook pro and a macbook air. Both systems are running the most recent version of Media Encoder CC (including updates) but only one will import MXF files from a Canon XF100? The macbook air imports and encodes the files without issue, however the macbook pro won't import the same MXF files and kicks the following error:
The file /Users/.../.../.../AA0106.MXF could not be imported. Could not read from source. Please check the settings and try again.
I could understand if both computers errored but using the same file, one will import and the other will not. Any help would be greatly appreciated. Thanks.

Just try this and see if it will work for you.
Open iPhoto > Preferences > General and deselect 'Connecting camera opens: iPhoto'.
Change it to 'No Application' and close iPhoto.
Now connect your camera to your computer and turn it on or better still use a card reader.
If iMovie tries to open, close it.
Your camera/card should now appear as an external drive.
Copy/paste your video files into a new folder on your desktop.
Eject and disconnect your camera/card.
Now open iMovie and go File > Import > Movies... and navigate to that folder.
Z.

FCP 7.0.3, Canon XF100, saved some clips to a portable hard drive and now they won't import? Tried moving them back to the CompactFlash but still won't import?

FCP 7.0.3, Canon XF100, saved some clips to a portable hard drive and now they won't import? Tried moving them back to the CompactFlash but still won't import? iMac, 10.6.8

Well, for FCP to see this file structure and recognize it, you need to download the Canon XF Log and Transfer plugin...
http://software.canon-europe.com/software/0040354.asp?model=
>I don't have the original clips on the card.
Meaning that they didn't back up the full card structure? Lordy...very few shooters do this and it is maddening. If you don't have the full card structure, even with the plugin, FCP cannot log and transfer.
As for ClipWrap2...that should work. Do you have the right files?

Can't import mxf-files (Canon XF100) into FCP 10.0.8 after Mavericks

Hello
It's not possible for me, to import mxf-files into FCP.
I haven't yoused FCP for a couple of days, but today I could not import files from my Canon XF100, so i think the problems came with Mavericks??
Does any of you have same problems?
What to do?
Kind regards
Thomas (Denmark)

Hi Russ -
I downloaded the utility and driver from here:
http://www.learn.usa.canon.com/resources/blogs/2012/20120223_xf_utilities_and_pl ugin_updates.shtml
But after looking around realized it isn't updated for Mavericks yet. I was only given two files and both weren't in any sort of directory structure- here is a screenshot.
Thanks in advance for your help!
-Robert

Does Lion really not work with Microsoft Office?

does Lion really not work with Microsoft Office?

I am afraid I have reverted to Snow Leopard as I was having one problem after another with Lion and for every problem I was solving, two new ones cropped up. I won't bore you with a long list, but one example is whenever I clicked on a single saved document to view, Microsoft Word would open not only that particular document, but also half a dozen other ones as well. Also, my Canon printer did not operate properly nor would Aol. With a lot of other weird stuff happening every day, the final straw was when my Time Capsule wouldn't backup properly, but just 'hang' indefinitely.
Luckily, I have two HD disks on my iMac and I had installed Lion on HD2 while still retaining Snow Leopard on HD1. I also made a Lion installation disk for future installation when all these software bugs have been sorted.
I am back to normal service with Snow Leopard and shall not return to Lion until at least the next upgrade/patch becomes available. I so looked forward to Lion as well, but I was fighting a losing battle.
I would suggest anyone who is in my position trying to stem the tidalwave of software problems with Lion, make an installation disk for Lion and go back to SL until the next upgrade.

No import from canon XF100 anymore?

no import from canon XF100 anymore in fcpX 10.1?
(this type of cam that is not mentioned in the list of supported cams. and with file import the data does not show up)
How further?
I even can 't finds a discription how to handle with the mts files wich should be possible in this version (i.m.o.)
Thanks!
bruce

The XF105 is on the list
Canon XF105
MPEG-2
Memory
Have you tried to import .mts files? For me they just show up in the import window like any other file. It may depend on the specific of the file. .mts doesn't tell you much.

Does final cut pro work on Macbook air.

Does final cut pro work on Macbook air.
I know it works fine on my Macbook Pro, but considering getting an Air for travelling, and like to import and do some basic editing while away.
Used to have a Macbook, and FCP wouldn't load on that.
Understand the Air's limitations on disk size, but only wanting it as a travelling editor.
Thanks

"Traveling editor" could imply dedicated offlining. Shane, do you think that could work with a low rez ProRes codec?
I don't think anyone has tried to use an AirBook for FCP. Anyone bother to search?
bogiesan

Why does everyone at my work loose their internet connection when I update Adobe Cloud Products?

Why does everyone at my work loose their internet connection when I update Adobe Cloud Products? We are on a 20mb broadband connection and there is around 20 people using computers at my work but when I start my Adobe Cloud Product update or when I try and download my Adobe Cloud Product everyone at my work looses their internet connection and so do I. But the update keeps downloading and installing.

I am sorry FooWingLi but the difficulties you are describing sounds more like a local network configuration issue. I would recommend working with your I.T. department to investigate this matter.

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two?

Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?

Is it possible to have your whole family on one apple id or is it better to have each person have there own?
Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
If each has their own does each id have to buy their own music and apps?
Yes, all purchases are non-transferable.
How does find my iphone work with one apple id or two?
Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID.

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Canon XF100 HD - Does it's Codec Work in FCPX

Similar Messages

Maybe you are looking for