Canon XH-A1s not detected by Adobe OnLocation CS5

Hi All,
I recently purchased the Canon XH-A1s HDV Camcorder.
I've hooked the camera up the my 2011 MacBook Pro (8GB RAM, Quad Core i7 Processor) and am wanting to use Adobe OnLocation to record monitor footage as it is shot.
However, when I open Adobe OnLocation the camera is not detected and I just get the standard "No Video Input Available".
I've had a look at the Mac OS X System Profiler, under the FireWire section and the Camera is detected fine, so I know there isn't a problem with the FireWire 800 cable.
My current steps are as follows:
With camera turned off connect FireWire cable from the Camera to the MacBook Pro.
Open Adobe OnLocation.
Create a new project.
Turn the camera on.
Does anyone have any thoughts? Am I doing anything wrong/not doing something?
All help is greatley appreciate.
Thanks,
Oliver

I've managed to get Adobe OnLocation to detect the XH-A1.
OnLocation does not automatically detect the camera when in Manual mode, or any of the other preset modes for that matter.
The camera needs to be set to the very first option (before the VCR mode - I forget it's name).
Oliver

Similar Messages

Trying to install Adobe Premiere elements 12. When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use. Please close all running exe(s). Nothing is runnin

question: Trying to install Adobe Premiere elements 12. When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use. Please close all running exe(s). Nothing is running when trying to install this, have been through this process several times. Found undertroubleshooting to delete files PDAppFlex.swf and PDAppFlex-app.xml and have done that as well. Any help will be greatly appreciated

Try Error "Installation cannot continue until... Adobe Bridge is closed" | Installation | CS5

I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5

I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3. I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have. I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version. What should I do

I have 6.0. Tried to download newest verion and it will not download. Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
Thanks, John
m: gener7
Sent: Thursday, December 11, 2014 6:01 PM
To: JOHN STAHLY
Subject: I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
created by gener7 <https://forums.adobe.com/people/gener7> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

Canon MX870 is not detected by Yosemite after new driver installed

I just downloaded and installed the new Canon drivers from their website that are supposed to support Scanner/Printer functions for my MX870 with Yosemite, but when I go to Settings for Printer/Scanner and try to add the printer from the wireless network, the computer does not detect it.
Anyone know what else I can do, or if I'm doing something wrong here?

Hi JordoGelbo,
Thanks for visiting Apple Support Communities.
If you are trying to set up a printer wirelessly, first take a look at the guide found at this link:
OS X Yosemite: Add or remove a printer
You can review the steps in the "Add a Wi-Fi or network printer" section to make sure your printer is being properly set up.
If the printer is still not visible, the section called "Add a network printer by its IP address" can be helpful.
For more troubleshooting tips, see the advice at this link:
Troubleshooting printer issues in OS X - Apple Support
Best Regards,
Jeremy

Adobe onlocation cs5

I have purchased the Mater Collection CS5 for PC. I recently migrated to Apple with Master Collection CS6(MAC). I am missing ONLOCATION. Prelude is only part of my solution. I need live recording to control video via scopes. Do you have a solution? Or is there a way to carry over the PC Onlocation cs5 for mac? in other words is there a way to use the PC license to activate onlocation on mac? Thanks

On my Mac book pro i am running CS6 and On Location CS5. I have no problems streaming live to my mac book pro to my Canon XL-H1 via firewire 3pin to usb800. You can not however stream in the HDV setting on the camera. Adobe On location can't handle streaming High definition footage even High definition video.

Canon 5D MkII not detecting in iMovie and Photo Booth

Background:
Until a few weeks ago we were using a Panasonic N28 Camcorder to take photos via Photo Booth and record videos via Image Capture. We had it connected using Firewire and maybe we also had USB too and it was able to shoot videos via iMovie'11 too. We now replaced this model with a Canon 5D MkII.
Issue:
Our Canon 5D MkII replaced our camcorder and it's connected via usb to our MAC running Mountain Lion and iMovie'11 with the latest update, yet it is not recognised by iMovie & Photobooth. It it unable to be selected and used instead of the iSight camera. It works fine in Image Capture so there is no hardware issues with the Canon 5D MkII. I can import recorded movies into iMovie'11 also.
What is the issue? Is there anything I need to download from Apple? Can my Canon 5D MkII be used in place of my Apple iSight camera?
Please help if you can.

I guess that may be a valid point, the Panasonic N28 Camcorder was of relatively low grade certainly not HD.
So if I want a better camera to use in place of the isight camera, am I best off going with a webcam?
My Panasonic was had a screw mount so I put a very wide lense on it. i also was able to vary the depth of field and achieve really good results. This is why I wanted the 5D to be used, and need an alternative.

Adobe OnLocation CS5 5.0.1 updates for retail?

About OnLocation 5.0.1 updates:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4715
Filename:
OnLocationTrial-5.0.1-mul-AdobeUpdate.dmg
Is this one suitable for retail version (install from DVD)?
As I remember there are some Adobe updates have 2 different versions.

Reply from Customer Support Portal:
This is the file for all the products either for retail or any other version.

Nikon Df Nef File Thumbnails not showing in Adobe Bridge CS5

HI,
I am having trouble getting NEF thumbnail to show in Bridge CS5, but only from the Nikon Df. All other, older, NEF files are showing up without a problem
I have installed the latest updates (Camera Raw etc)
I would appreciate any advice on getting this to happen.
Thanks
BD

Ok thanks for that, at least I wont be chasing my tail.
I did install the DNG converter 8.3 but I still NEF files as a NEF icon. Any clues to what I may not be doing right there?

HT3669 iEPP, Easy Photo Print, App not 'detecting' my Canon MX870 printer/scanner.

Downloaded the iPod Touch iEPP Airprint app for printing wirelessly to my approved, Canon MX870 printer/scanner and the app can't detect it.
Thanks

I have been having the same issue with the Canon iEPP app not detecting the printer using an iPhone 4S, 5S and iPad Air. I was on the phone with Canon IT support and the devices and apps can communicate with the printer when I type in the printer IP address in the Safari browser.
I have Comcast Xfinity for interner and have a Linksys Wireless-G router.
I tried about 5 different free app which support my Canon MX870 printer and none can detect the printer.
Any suggestions?

Adobe OnLocation connection to mobile phone by wi-fi?

Hi,
I have Samsung S8500 wave II mobile phone. Can I connect my mobile phone by wi-fi or other connecting method to my notebook and shoot video by Adobe OnLocation CS5?
Sorry for my english.
Thank You!

Hi and welcome to the forums!
You really didn't give much info, hopefully the attached link will help.
Thanks,
Bifocals
KB23520 What is the Wi-Fi Music Sync feature?
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

OnLocation CS5.1 Codec Problems

I installed the trial version of OnLocation in order to try it out and then purchased the Production Premium Suite. When I launched the trial version and signed in it informed me that I was missing codecs that are not available in the trial version and asks me to install them. I have clicked ok hundreds of times over several months and it has never finished the download. The highest percent I have ever gotten to has been 48% but it is usually around 4%. The weirdest part is that afterward I get a message that says "Adobe OnLocation CS5.1 codecs were successfully installed. Adobe OnLocation CS5.1 must be restarted to use the new codecs." But every time I restart the program it tells me I have to install codecs not included in the trial version and the whole process starts again. Any ideas?
Thanks,
Marcus

So, it turns out I didn't try the very obvious until after I posted this question. I just reinstalled OnLocation and it fixed the problem completely.

Adobe creative cloud desktop is not detecting my internet connection?

adobe creative cloud desktop is not detecting my internet connection?

i connected with the adobe people through 'contact an agent'.
very helpful, they remote managed my desktop to fix the issue.
apparently something to do with permissions not activated for adobe, not sure how and why this happens though, or why it was fine earlier and suddenly stoppped.
they insisted it was to do with being on a wifi connection but that's not possible because i have my laptop right next to my desktop and that was working fine.
it took about four hours to fix though, so be patient!

Canon MP560 Printer is not detected by System Preferences

Hi everyone,
I am using a 2010 Macbook Pro with OS X Version 10.7.5, I have had this Canon MP560 Printer for about 2 years now and it has been working perfectly until lately when it starts to keep on returning "a communication error has occured" whenever I tried to print something.
I have read through the forum and noticed that people have experienced the same thing as me.
So for me, I have tried the following solutions:
1. Checking if the LAN connection is working and printing the LAN test page from printer. It does print ad says that wireless LAN is enabled an active.
2. I deleted the printer and scanner from System Preferences and try to re-add it
3. Update my software
When I tried to re-add it, there is no printer detected. I tried doing the step-by-step that PAHU recommended that worked for some one but unfortunately it does not work for me. My printer still does not appear when I tried to look up a printer.
(Here is the step by step that I followed:
The printer component of the MP560 can take longer to appear than the scanner component. The scanner uses Bonjour to advertise itself on the wireless network, while the printer component uses a proprietary protocol called "canonijnetwork". If you select to add a printer and have the Default Add Printer view open, you will see the MP560 as Bonjour Scanner in the Kind column. But if you wait at least 15 seconds more, the printer should appear showing "canonijnetwork" in the Kind column.
If this printer component does not appear after 30 seconds maximum then it would suggest a problem with the printer driver installation. So open Finder and navigate to HD > Library > Printers > Canon > BJPrinter and trash the contents of this folder. Then download the latest MP560 driver via this link and run the installer. With the installation completed, try to add the printer again.)
Since I have tried these suggestions but still is not successful I wonder what's wrong with my Printer/Macbook and if there's any other way to add printer (using IP address for example ). If anyone could help me, I would really appreciate it.
Thanks!

Yes I can Ping the IP address from Network Utility.
Before, my Macbook couldn't even recognize the scanner, but now I can add the Scanner from System Preferences.
However, my printer is stll not detected. I am missing some sort of an application or something?

Mac OS X 10.9.3 does not detect the presence of Canon MX395 printer. Help?

Hi,
My printer/scanner was working fine before I upgraded to Mac OS X Mavericks. I now run OS X 10.9.3, the printer is Canon MX395.
Basically mr problem is that the printer is simply not detected. I turn it on and plug in the USB cable but nothing happens. I cannot view the printer in the list of printers in System Preferences > Printers & Scanners, nor can view it if I click Add. I have already spent 2 sessions of 3-4 hours following all steps provided in Apple Support pages about setting up printers and troubleshooting with printers (including reset printing system and deleting all canon related files/applications and installing everything again, meaning both drivers from canon and canon drivers from Apple) and I am sure that the printer is working and well connected.
Need help please!
Thanks,
Antoine

Hi all,
Update on my situation, my problem is solved.
I disinstalled and reinstalled many times everything to come to the conclusion that, in my case, installing the driver from Canon PROHIBITS the printer/scanner from working. Indeed, everything is now running fine with Apple driver for Canon printers (Apple Canon Printer Driver 3.0 for mac OS). BUT, if Canon driver is at the same time installed, computer is not being recognized. Having solely Canon driver without Apple driver also results in the printer not being recognized.
This may sound weird (at least to me) but that is how it seems to be. Hope this can help anyone.
Final solution:
1) disinstall everything printer related (printers, drivers, reset printing system)
> In my case, I did not reinstall Mavericks nor reset the whole OS
2) install the Apple driver (and ignore the one from Canon)
3) connect the printer, turn it on, should be working
Regards,
Antoine

I can not re install Adobe Acrobat 7.0 professional on my computer. It is saying a qualifying product is not detected. I cant even get through using the customer service line they provide 800-272-3623. This is the worst interactionI have ever had with a

i can not re install Adobe Acrobat 7.0 professional on my computer. It is saying a qualifying product is not detected. I cant even get through using the customer service line they provide 800-272-3623. This is the worst interactionI have ever had with a company.

Hi joej49728017,
I am so sorry for the inconvenience caused. However this is just because Adobe Acrobat 7.0 is an outdated version & the now the activation server for it does not exist.
Please refer to the following KB doc. Error: "Activation Server Unavailable" | CS2, Acrobat 7, Audition 3
The above link will help you to install a special version that does not require activation.
In case you further need any help, please let us know. We will be more than happy to help you.
Regards,
Aadesh

Canon XH-A1s not detected by Adobe OnLocation CS5

Similar Messages

Maybe you are looking for