Canon XH Series Levels

All my video from a Canon XH A1 is transferring at a luminence range of 7.5-110 IRE and the highlights look over exposed. Is that normal on this camcorder? The other cameras I've used have always been in the range of 7.5-100. Anyone have the same issue?
Thanks for the help.
Jim

Thanks. I turned off AGC and recorded some video and the levels on the captured footage are now in spec, although the range was only between 15-80 IRE. I never had a camera with AGC so I thought it might be helpful in run & gun situations, but I don't like it at all. So OFF it shall stay! Thanks for answering - very helpful.
Jim

Similar Messages

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server.

I'm trying to setup my Canon MX870 USB ink jet printer plugged into my Airport Extreme's USB port. However, I keep getting a message of; "Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server." And then I have to click cancel.
The "Print & Scan" from System Preferences, can see the printer as it has the NAME: Canon MX870 series, and the LOCATION: 'the name of my network', and USE: MX870 series. But after clicking "Add", it tries to install the software (I've already installed the latest drivers however on my Mac Pro) and that's when I get this message;
"Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server."
Any ideas, help would be greatly appreciated!
Marty

Hello Marty,
It sounds like you are not able to add your Canon printer in System Preferences. I found an article with steps you can take to resolve this:
Resolution
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Canon 2100 Series printing in reverse order

I have a Canon 2100 series -- an MG 2120. When I print things out, they come out in the tray in reverse order -- a six page document will thus have p. 6 on top when I take the stack out. I cannot find a setting on my computer to make things print out in reverse order, so that page one will be on top and I won't have to manually put multipage documents in order. Help?

Hi oldwest,
To change the order in which pages are printed, please follow the steps located at the link below:
PIXMA MG2120 - Changing the Print Order
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

[SOLVED] Make failing for Canon MG6400-series scanner driver

EDIT: ~~ Solution ~~ << Click this
Hello,
Been trying to install my scanner, Canon MG6450 (PSC, all-in-one), however no package in repository nor AUR so downloaded the tarball from Canon's website, ran the autogen.sh and make. The make keep failing, been scratching my head and searching for hours but so far no luck.
Running the autogen.sh seems flawless, then time for make... and errors. Full log of make:
$ make
(CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/user/scangearmp-source-2.20-1/scangearmp/missing autoheader)
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
rm -f stamp-h1
touch config.h.in
cd . && /bin/sh ./config.status config.h
config.status: creating config.h
config.status: config.h is unchanged
make all-recursive
make[1]: Entering directory '/home/user/scangearmp-source-2.20-1/scangearmp'
Making all in po
make[2]: Entering directory '/home/user/scangearmp-source-2.20-1/scangearmp/po'
file=./`echo de | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -c -o $file de.po
de.po:6: warning: header field 'Language' missing in header
file=./`echo fr | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -c -o $file fr.po
fr.po:6: warning: header field 'Language' missing in header
file=./`echo ja | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -c -o $file ja.po
ja.po:6: warning: header field 'Language' missing in header
file=./`echo zh | sed 's,.*/,,'`.gmo \
&& rm -f $file && /usr/bin/msgfmt -c -o $file zh.po
zh.po:6: warning: header field 'Language' missing in header
make[2]: Leaving directory '/home/user/scangearmp-source-2.20-1/scangearmp/po'
Making all in backend
make[2]: Entering directory '/home/user/scangearmp-source-2.20-1/scangearmp/backend'
/bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I. -I./include -DV_MAJOR=2 -DV_MINOR=2 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT libsane_canon_mfp_la-canon_mfp.lo -MD -MP -MF .deps/libsane_canon_mfp_la-canon_mfp.Tpo -c -o libsane_canon_mfp_la-canon_mfp.lo `test -f 'canon_mfp.c' || echo './'`canon_mfp.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I. -I./include -DV_MAJOR=2 -DV_MINOR=2 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT libsane_canon_mfp_la-canon_mfp.lo -MD -MP -MF .deps/libsane_canon_mfp_la-canon_mfp.Tpo -c canon_mfp.c -fPIC -DPIC -o .libs/libsane_canon_mfp_la-canon_mfp.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I. -I./include -DV_MAJOR=2 -DV_MINOR=2 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT libsane_canon_mfp_la-canon_mfp.lo -MD -MP -MF .deps/libsane_canon_mfp_la-canon_mfp.Tpo -c canon_mfp.c -o libsane_canon_mfp_la-canon_mfp.o >/dev/null 2>&1
mv -f .deps/libsane_canon_mfp_la-canon_mfp.Tpo .deps/libsane_canon_mfp_la-canon_mfp.Plo
/bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I. -I./include -DV_MAJOR=2 -DV_MINOR=2 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT libsane_canon_mfp_la-canon_mfp_tools.lo -MD -MP -MF .deps/libsane_canon_mfp_la-canon_mfp_tools.Tpo -c -o libsane_canon_mfp_la-canon_mfp_tools.lo `test -f 'canon_mfp_tools.c' || echo './'`canon_mfp_tools.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I. -I./include -DV_MAJOR=2 -DV_MINOR=2 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT libsane_canon_mfp_la-canon_mfp_tools.lo -MD -MP -MF .deps/libsane_canon_mfp_la-canon_mfp_tools.Tpo -c canon_mfp_tools.c -fPIC -DPIC -o .libs/libsane_canon_mfp_la-canon_mfp_tools.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I. -I./include -DV_MAJOR=2 -DV_MINOR=2 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT libsane_canon_mfp_la-canon_mfp_tools.lo -MD -MP -MF .deps/libsane_canon_mfp_la-canon_mfp_tools.Tpo -c canon_mfp_tools.c -o libsane_canon_mfp_la-canon_mfp_tools.o >/dev/null 2>&1
mv -f .deps/libsane_canon_mfp_la-canon_mfp_tools.Tpo .deps/libsane_canon_mfp_la-canon_mfp_tools.Plo
/bin/sh ../libtool --tag=CC --mode=link gcc -DV_MAJOR=2 -DV_MINOR=2 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -version-info 2:2:0 -o libsane-canon_mfp.la -rpath /usr/lib libsane_canon_mfp_la-canon_mfp.lo libsane_canon_mfp_la-canon_mfp_tools.lo -lusb -ldl -lcncpnet -lpthread -lz -lusb
libtool: link: gcc -shared -fPIC -DPIC .libs/libsane_canon_mfp_la-canon_mfp.o .libs/libsane_canon_mfp_la-canon_mfp_tools.o -ldl -lcncpnet -lpthread -lz -lusb -O2 -Wl,-soname -Wl,libsane-canon_mfp.so.2 -o .libs/libsane-canon_mfp.so.2.0.2
libtool: link: (cd ".libs" && rm -f "libsane-canon_mfp.so.2" && ln -s "libsane-canon_mfp.so.2.0.2" "libsane-canon_mfp.so.2")
libtool: link: (cd ".libs" && rm -f "libsane-canon_mfp.so" && ln -s "libsane-canon_mfp.so.2.0.2" "libsane-canon_mfp.so")
libtool: link: ar cru .libs/libsane-canon_mfp.a libsane_canon_mfp_la-canon_mfp.o libsane_canon_mfp_la-canon_mfp_tools.o
libtool: link: ranlib .libs/libsane-canon_mfp.a
libtool: link: ( cd ".libs" && rm -f "libsane-canon_mfp.la" && ln -s "../libsane-canon_mfp.la" "libsane-canon_mfp.la" )
make[2]: Leaving directory '/home/user/scangearmp-source-2.20-1/scangearmp/backend'
Making all in src
make[2]: Entering directory '/home/user/scangearmp-source-2.20-1/scangearmp/src'
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-main.o -MD -MP -MF .deps/scangearmp-main.Tpo -c -o scangearmp-main.o `test -f 'main.c' || echo './'`main.c
mv -f .deps/scangearmp-main.Tpo .deps/scangearmp-main.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-callbacks.o -MD -MP -MF .deps/scangearmp-callbacks.Tpo -c -o scangearmp-callbacks.o `test -f 'callbacks.c' || echo './'`callbacks.c
mv -f .deps/scangearmp-callbacks.Tpo .deps/scangearmp-callbacks.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-interface.o -MD -MP -MF .deps/scangearmp-interface.Tpo -c -o scangearmp-interface.o `test -f 'interface.c' || echo './'`interface.c
mv -f .deps/scangearmp-interface.Tpo .deps/scangearmp-interface.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-support.o -MD -MP -MF .deps/scangearmp-support.Tpo -c -o scangearmp-support.o `test -f 'support.c' || echo './'`support.c
mv -f .deps/scangearmp-support.Tpo .deps/scangearmp-support.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-coloradjust.o -MD -MP -MF .deps/scangearmp-coloradjust.Tpo -c -o scangearmp-coloradjust.o `test -f 'coloradjust.c' || echo './'`coloradjust.c
mv -f .deps/scangearmp-coloradjust.Tpo .deps/scangearmp-coloradjust.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-coloradjust_bc.o -MD -MP -MF .deps/scangearmp-coloradjust_bc.Tpo -c -o scangearmp-coloradjust_bc.o `test -f 'coloradjust_bc.c' || echo './'`coloradjust_bc.c
mv -f .deps/scangearmp-coloradjust_bc.Tpo .deps/scangearmp-coloradjust_bc.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-coloradjust_hg.o -MD -MP -MF .deps/scangearmp-coloradjust_hg.Tpo -c -o scangearmp-coloradjust_hg.o `test -f 'coloradjust_hg.c' || echo './'`coloradjust_hg.c
mv -f .deps/scangearmp-coloradjust_hg.Tpo .deps/scangearmp-coloradjust_hg.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-coloradjust_tc.o -MD -MP -MF .deps/scangearmp-coloradjust_tc.Tpo -c -o scangearmp-coloradjust_tc.o `test -f 'coloradjust_tc.c' || echo './'`coloradjust_tc.c
mv -f .deps/scangearmp-coloradjust_tc.Tpo .deps/scangearmp-coloradjust_tc.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-coloradjust_fr.o -MD -MP -MF .deps/scangearmp-coloradjust_fr.Tpo -c -o scangearmp-coloradjust_fr.o `test -f 'coloradjust_fr.c' || echo './'`coloradjust_fr.c
mv -f .deps/scangearmp-coloradjust_fr.Tpo .deps/scangearmp-coloradjust_fr.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-coloradjust_mc.o -MD -MP -MF .deps/scangearmp-coloradjust_mc.Tpo -c -o scangearmp-coloradjust_mc.o `test -f 'coloradjust_mc.c' || echo './'`coloradjust_mc.c
mv -f .deps/scangearmp-coloradjust_mc.Tpo .deps/scangearmp-coloradjust_mc.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-com_gtk.o -MD -MP -MF .deps/scangearmp-com_gtk.Tpo -c -o scangearmp-com_gtk.o `test -f 'com_gtk.c' || echo './'`com_gtk.c
mv -f .deps/scangearmp-com_gtk.Tpo .deps/scangearmp-com_gtk.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-cnmsstr.o -MD -MP -MF .deps/scangearmp-cnmsstr.Tpo -c -o scangearmp-cnmsstr.o `test -f 'cnmsstr.c' || echo './'`cnmsstr.c
mv -f .deps/scangearmp-cnmsstr.Tpo .deps/scangearmp-cnmsstr.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-w1_main.o -MD -MP -MF .deps/scangearmp-w1_main.Tpo -c -o scangearmp-w1_main.o `test -f 'w1_main.c' || echo './'`w1_main.c
mv -f .deps/scangearmp-w1_main.Tpo .deps/scangearmp-w1_main.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-w1_size.o -MD -MP -MF .deps/scangearmp-w1_size.Tpo -c -o scangearmp-w1_size.o `test -f 'w1_size.c' || echo './'`w1_size.c
mv -f .deps/scangearmp-w1_size.Tpo .deps/scangearmp-w1_size.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-w1_ui.o -MD -MP -MF .deps/scangearmp-w1_ui.Tpo -c -o scangearmp-w1_ui.o `test -f 'w1_ui.c' || echo './'`w1_ui.c
mv -f .deps/scangearmp-w1_ui.Tpo .deps/scangearmp-w1_ui.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-preference.o -MD -MP -MF .deps/scangearmp-preference.Tpo -c -o scangearmp-preference.o `test -f 'preference.c' || echo './'`preference.c
mv -f .deps/scangearmp-preference.Tpo .deps/scangearmp-preference.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-save_dialog.o -MD -MP -MF .deps/scangearmp-save_dialog.Tpo -c -o scangearmp-save_dialog.o `test -f 'save_dialog.c' || echo './'`save_dialog.c
mv -f .deps/scangearmp-save_dialog.Tpo .deps/scangearmp-save_dialog.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-prev_main.o -MD -MP -MF .deps/scangearmp-prev_main.Tpo -c -o scangearmp-prev_main.o `test -f 'prev_main.c' || echo './'`prev_main.c
mv -f .deps/scangearmp-prev_main.Tpo .deps/scangearmp-prev_main.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-prev_sub.o -MD -MP -MF .deps/scangearmp-prev_sub.Tpo -c -o scangearmp-prev_sub.o `test -f 'prev_sub.c' || echo './'`prev_sub.c
mv -f .deps/scangearmp-prev_sub.Tpo .deps/scangearmp-prev_sub.Po
gcc -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_DATA_DIR=\""/usr/local/share"\" -DPACKAGE_LOCALE_DIR=\""/usr/local/share/locale"\" -I../include -I../backend -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -pthread -I/usr/include/gimp-2.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/harfbuzz -I/usr/include/libdrm -I/usr/include/libpng16 -DV_MAJOR=1 -DV_MINOR=0 -O2 -D__GIMP_PLUGIN_ENABLE__ -D_FILE_OFFSET_BITS=64 -MT scangearmp-scanfile.o -MD -MP -MF .deps/scangearmp-scanfile.Tpo -c -o scangearmp-scanfile.o `test -f 'scanfile.c' || echo './'`scanfile.c
scanfile.c: In function ‘WritePnmHeader’:
scanfile.c:469:2: warning: incompatible implicit declaration of built-in function ‘strncpy’
strncpy( buf, "\0", 1 ); /* Buff Init */
^
scanfile.c:499:18: warning: incompatible implicit declaration of built-in function ‘strlen’
if( (len_type = strlen( str_type )) == 0 )
^
scanfile.c:501:2: warning: incompatible implicit declaration of built-in function ‘strncat’
strncat( buf+ptr, str_type, len_type);
^
scanfile.c: In function ‘Change_RAW_to_PNG’:
scanfile.c:643:54: error: ‘Z_BEST_SPEED’ undeclared (first use in this function)
plibpngapi->p_png_set_compression_level( write_ptr, Z_BEST_SPEED ); /* maximum speed */
^
scanfile.c:643:54: note: each undeclared identifier is reported only once for each function it appears in
Makefile:799: recipe for target 'scangearmp-scanfile.o' failed
make[2]: *** [scangearmp-scanfile.o] Error 1
make[2]: Leaving directory '/home/user/scangearmp-source-2.20-1/scangearmp/src'
Makefile:423: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/user/scangearmp-source-2.20-1/scangearmp'
Makefile:355: recipe for target 'all' failed
make: *** [all] Error 2
Any suggestions on how to make progress it would be appriciated. Will keep on trying to find a solution.
Thanks in advance.
PS.
I'm fairly new to Arch, comming from a long history with Ubuntu.
Oh, and btw, it's just scanner drivers that fails - found printer ones at AUR. Scanner drivers up to MG6300-series are at the AUR.
DS.
Last edited by am2del (2015-05-09 14:59:46)

~~ Solution ~~ (version numbers are current availible)
[As root]: Install the printer over network
Driver: Availible at AUR, cnijfilter-mg6400series 4.00-1
yaourt cnijfilter-mg6400series
Device url: (replace XX-XX-XX-XX-XX-XX with Printer MAC)
cnijbe://Canon/?port=net&serial=XX-XX-XX-XX-XX-XX
Make & model:
Canon MG6400 series Ver.4.00
[Download]: MG6400 series ScanGear MP driver RPM from Canon
[As root]: Install rpmextract
$ pacman -S rpmextract
[As user]: Extract RPM
$ rpmextract.sh scangearmp-common 2.20-1.rpm
$ rpmextract.sh scangearmp-mg6400series-2.20-1.x86_64.rpm
[As root]: Copy to folders
$ cp -r ~/etc/* /etc/
$ cp -r ~/usr/lib64/* /usr/lib64/
$ cp -r ~/usr/local/* /usr/local/
$ cp -r ~/usr/share/* /usr/share/
[As root]: Make symbolic links for lib64 files
$ ls -s /usr/lib64/libcn*
[As root]: Install GIMP & XSane
$ pacman -S gimp xsane-gimp
[As user]: Open GIMP
File > Create > XSane: Device dialog... [Scanning for devices...]
Ready to scan~ (and ofcourse over network, honestly never tried USB for this printer...)
Gonna see if I can figure out how to add this finished to AUR for automatic install... Might be beyond me still, but gonna try.
This reference << Helped a lot.
Last edited by am2del (2015-05-09 15:01:00)

Buying new all-in-one printer- canon pixma series?

hi!
i really wanna replace my hp 5610 with a better, faster printer.
* fax
* duplex (feeder ofc) scanner
* duplex printing
* five ink cartridges (not combined)
* network access: ethernet OR wifi. which will connect to the router; wireless or wired.
**cheap black ink**
well, i checked out canon pixma series. the real problem is that i dont know what "mac support" mean. at my hp 5610, hp say the printer is mac cimpatible. but as i worked with windows and mac, i can honestly say the mac support is as good as nothing... just to add "mac supported" at the features.
i am a student so i will print much @ black. plus i always scan my papers so i really need duplex scaning too.
what do you say about the canon pixma mx860 model?
if you can recommend other models (*not HP!!!!*) i will love to know.
thanks!

PAHU wrote:
edenmac wrote:
well, i checked out canon pixma series. the real problem is that i dont know
what do you say about the canon pixma mx860 model?
I would actually recommend the [PIXMA MX870|http://www.canon.com.au/en-AU/For-You/Printers/PIXMA-InkJet-Printers/MX870].
It has 5 individual tanks with a high volume black tank for text printing.
Duplex document feeder
Wireless or Ethernet support
Mac OS X printer and scanner driver included as part of Apple Software Update
well my hp (which *****) also have "mac support" via apple software update. the peoblem is that its features lacking and even the simplest operations like increasing brightness/contrast are missing.
i would prefer the manufacturer's software is its full featured + ofc mac supported.
Bruce De Benedictis wrote:
I am very happy with my MX 850, a predecessor. I use it for most of my printing, except that I have a color laser printer for really big jobs. I suspect that the cost of consumables is comparable on both printers, as 5-8 ink cartridges print about the same as a laser cartridge, and cost about the same as well. Maybe the laser is a bit more expensive, when the other consumables are taken into account.
Scanning is very convenient. I also use the printer as a card reader, although the computer cannot write to them.
do you use canons software or the apple built-in? can you set a new profile with higher brightness+higher contrast?
what about the duplex feature? for scanning? works well? fast? those kind of details usually arent taking into consideration either at specs nor reviews
Message was edited by: edenmac

MacBook Air can not find canon f8500 series printer on network.

MacBook Air running OS X Yosemite can not find Canon MF8500 series printer on wireless network. AirPrint is turned on at printer. iPhone iOS 8.2 can not AirPrint to printer as well. Recently switched from Verizon to Comcast for internet service, no issues before switch. Tried to add printer via IP address, it was located but could not print to printer.

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Try setting it up as something other than AirPrint. I have seen several posts where that was the problem.

Error on my Canon MX530 series Printer

Hi, I have a Canon MX530 series Printer. The printer works good when I use it to scan or fax but when I try to print a PDF or Excel or whatever that comes from my computer it dosen't want to print (It says ''the printer dosen't respond'' or ''L'imprimante ne repond pas''). Bluetooth works fine, Wifi works fine and when I go in the printer's setting, on my computer, it says it works fine. BUT IT DOSEN'T WANT TO PRINT DOCUMENTS !!!
HELP ME !!!!!!
thank you very much .
David

Hi @jennirvinpest,
Welcome to the HP Forums!
I noticed that you are getting the error message that says your USB is not connected with your HP Photosmart c4200 series.
For further assistance, I will need some more information:
The Product/Model Number of your printer. Follow instructions in this link. Finding Your HP Product Model Number.
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is able to make copies.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
Thank you for posting, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

IConnect and Canon iP4700 series

My system is:
MacBook Pro with 10.6.4
EPSON Stylus COLOR 880
Canon iP4700 series
iConnect
My problem:
I want to connect 2 printers with iConnect.
The connection with my first printer Epson was successfull.
The problem starts when I tried to connect my second printer Canon.
Is the printer of Canon compatible with iConnect ?
When I try to add the printer, he does not appear in the printerlist.
I get the following answer, but when I want to chose a printermodel he does not accept the chosen driver
Does there not exist a driver from Gutenprint?
Can I use another printerdriver from another brand to connect my Canonprinter?
With the attached harddrive all other functions works good.
My main reason of buying iconnect was to be able to print in my wireless network.
Thanks for your help

Hello and welcome to Apple Discussions.
The Canon printer driver cannot be used when you have the printer connected to the USB port of a 3rd party print server. It will work when the printer is connected to an Apple Extreme or Express USB port, but not any other brand.
For these types of connections you need to use either the Gutenprint driver or PrintFab. Looking at v5.25 of Gutenprint, the iP4700 is not yet listed as a supported model - it is a very new model after all. The previous model, the iP4600, is listed and this may work for you. The caveat with finding another compatible model is the types of inks used by the printer. If the supported driver uses the same inks as the unsupported model, then there is a good chance the alternate driver will work.
If you cannot find a compatible model within the Gutenprint driver suite, then you could look at using [PrintFab|www.printfab.net] as the iP4700 is listed as a supported model. Note that there is a cost for PrintFab, although there is a 30 day trial version available. So you could at least try this driver suite and decide if you want to pay for it or wait until Gutenprint releases another update that does support the iP4700.
Pahu

I have a canon mg2100 series printer. I print shipping labels with black ink. I ran out and changed

I have a canon mg2100 series printer. I print shipping labels and use black ink. I ran out and changed the cartridge, now the text is faded looking and I can't read major parts of the label. I did the cleaning print head under control panel and it did fine, but when I try to print again it's still faded. Help!

Hi ttsheppard,
It is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case.
Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon MX390 series Printer - Printing pictures to bright

Hey everybody
So my printer is starting to make problems for some reason The problem is everytime i print picture, it coming out to much bright Althought when im printing a document/text file it turns out just fine..
Someone can maybe help?
Printer: Canon MX390 series Printer
Any help will be much appriciate

It just started to do this like just 2 weeks agoAnd i didnt touched the program im usingthis:

What is "Printer WS" for my Canon MX710 series printer?

In addition to "Canon MX710 series Printer," there is a "Canon MX710 series Printer WS" listed. I never print to the WS one, and would like to remove it from my printer list to reduce the icon options. What is it and why would I want to print to it? Couldn't find a clear answer to this on the net or in this forum. Thanks.

Web Services, and it makes a difference when you try to connect wirelessly to your pc if you have printer WS selected or not.

[SOLVED]Canon D1100 Series UFRII LT doesn't print, CUPS thinks it does

Hello everyone,
I have been struggling getting a network printer at work working with my laptop. I installed the driver from Canon's web site, and everything seems to be fine on my end, but the network printer doesn't print anything I give it. I can't find the issue in my log after running the following command:
echo "This is a test. Hello world." | lpr -p
Here's the output from the error log:
D [30/Jan/2014:14:52:31 -0600] [Client 14] 2.0 Create-Job 2
D [30/Jan/2014:14:52:31 -0600] Create-Job ipp://localhost:631/printers/Canon_D1150_D1170
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [30/Jan/2014:14:52:31 -0600] add_job: requesting-user-name="yaro"
I [30/Jan/2014:14:52:31 -0600] [Job 15] Adding start banner page "none".
D [30/Jan/2014:14:52:31 -0600] Discarding unused job-created event...
I [30/Jan/2014:14:52:31 -0600] [Job 15] Queued on "Canon_D1150_D1170" by "yaro".
D [30/Jan/2014:14:52:31 -0600] [Client 14] Returning IPP successful-ok for Create-Job (ipp://localhost:631/printers/Canon_D1150_D1170) from localhost
D [30/Jan/2014:14:52:31 -0600] [Client 14] Content-Length: 179
D [30/Jan/2014:14:52:31 -0600] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=179, response=0x7f8adff8f1e0(IPP_IDLE), pipe_pid=0, file=-1
D [30/Jan/2014:14:52:31 -0600] [Client 14] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
D [30/Jan/2014:14:52:31 -0600] [Client 14] bytes=0, http_state=0, data_remaining=0
D [30/Jan/2014:14:52:31 -0600] [Client 14] Waiting for request.
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Client 14] POST /printers/Canon_D1150_D1170 HTTP/1.1
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [30/Jan/2014:14:52:31 -0600] [Client 14] No authentication data provided.
D [30/Jan/2014:14:52:31 -0600] [Client 14] 2.0 Send-Document 3
D [30/Jan/2014:14:52:31 -0600] Send-Document ipp://localhost:631/printers/Canon_D1150_D1170
D [30/Jan/2014:14:52:31 -0600] cupsdIsAuthorized: requesting-user-name="yaro"
D [30/Jan/2014:14:52:31 -0600] [Job 15] Auto-typing file...
D [30/Jan/2014:14:52:31 -0600] [Job 15] Request file type is text/plain.
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [30/Jan/2014:14:52:31 -0600] [Job 15] File of type text/plain queued by "yaro".
I [30/Jan/2014:14:52:31 -0600] [Job 15] Adding end banner page "none".
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Job 15] time-at-processing=1391115151
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
D [30/Jan/2014:14:52:31 -0600] [Job 15] 4 filters for job:
D [30/Jan/2014:14:52:31 -0600] [Job 15] texttopdf (text/plain to application/pdf, cost 32)
D [30/Jan/2014:14:52:31 -0600] [Job 15] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [30/Jan/2014:14:52:31 -0600] [Job 15] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
D [30/Jan/2014:14:52:31 -0600] [Job 15] pstoufr2cpca (application/vnd.cups-postscript to printer/Canon_D1150_D1170, cost 0)
D [30/Jan/2014:14:52:31 -0600] [Job 15] job-sheets=none,none
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[0]="Canon_D1150_D1170"
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[1]="15"
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[2]="yaro"
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[3]="(stdin)"
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[4]="1"
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[5]="finishings=3 number-up=1 prettyprint job-uuid=urn:uuid:9566668d-244b-32ad-4b26-afeeb081bd7f job-originating-host-name=localhost time-at-creation=1391115151 time-at-processing=1391115151"
D [30/Jan/2014:14:52:31 -0600] [Job 15] argv[6]="/var/spool/cups/d00015-001"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[7]="CUPS_STATEDIR=/run/cups"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[8]="HOME=/var/spool/cups/tmp"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[10]="SERVER_ADMIN=root@spike"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[11]="SOFTWARE=CUPS/1.7.1"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[13]="USER=root"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[14]="CUPS_MAX_MESSAGE=2047"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[17]="IPP_PORT=631"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[18]="CHARSET=utf-8"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[19]="LANG=en.UTF-8"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[20]="PPD=/etc/cups/ppd/Canon_D1150_D1170.ppd"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[21]="RIP_MAX_CACHE=128m"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[22]="CONTENT_TYPE=text/plain"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[23]="DEVICE_URI=socket://192.168.2.51"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[24]="PRINTER_INFO=Canon D1150/D1170"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[25]="PRINTER_LOCATION="
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[26]="PRINTER=Canon_D1150_D1170"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[27]="PRINTER_STATE_REASONS=none"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[28]="CUPS_FILETYPE=document"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[29]="FINAL_CONTENT_TYPE=printer/Canon_D1150_D1170"
D [30/Jan/2014:14:52:31 -0600] [Job 15] envp[30]="AUTH_I****"
I [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter /usr/lib/cups/filter/texttopdf (PID 5140)
I [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter /usr/lib/cups/filter/pdftopdf (PID 5141)
I [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter /usr/lib/cups/filter/pdftops (PID 5142)
I [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter /usr/lib/cups/filter/pstoufr2cpca (PID 5143)
I [30/Jan/2014:14:52:31 -0600] [Job 15] Started backend /usr/lib/cups/backend/socket (PID 5144)
D [30/Jan/2014:14:52:31 -0600] Discarding unused job-state-changed event...
D [30/Jan/2014:14:52:31 -0600] [Client 14] Returning IPP successful-ok for Send-Document (ipp://localhost:631/printers/Canon_D1150_D1170) from localhost
D [30/Jan/2014:14:52:31 -0600] [Client 14] Content-Length: 171
D [30/Jan/2014:14:52:31 -0600] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=171, response=0x7f8adff825e0(IPP_IDLE), pipe_pid=0, file=-1
D [30/Jan/2014:14:52:31 -0600] [Client 14] Writing IPP response, ipp_state=DATA, old wused=0, new wused=0
D [30/Jan/2014:14:52:31 -0600] [Client 14] bytes=0, http_state=0, data_remaining=0
D [30/Jan/2014:14:52:31 -0600] [Client 14] Waiting for request.
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Client 14] HTTP_STATE_WAITING Closing on EOF
D [30/Jan/2014:14:52:31 -0600] [Client 14] Closing connection.
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Job 15] Page = 612x792; 14,14 to 598,778
D [30/Jan/2014:14:52:31 -0600] [Job 15] STATE: +connecting-to-device
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Job 15] Looking up "192.168.2.51"...
D [30/Jan/2014:14:52:31 -0600] [Job 15] pstoufr2cpca start.
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
D [30/Jan/2014:14:52:31 -0600] [Job 15] pdftops - copying to temp print file "/var/spool/cups/tmp/0141652eb6fae"
D [30/Jan/2014:14:52:31 -0600] [Job 15] prtGeneralCurrentLocalization type is 5, expected 2!
D [30/Jan/2014:14:52:31 -0600] [Job 15] backendWaitLoop(snmp_fd=5, addr=0x7f63fcee8c88, side_cb=0x7f63fb5631e0)
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5140 (/usr/lib/cups/filter/texttopdf) exited with no errors.
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5141 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [30/Jan/2014:14:52:31 -0600] [Job 15] Printer make and model: Canon d1100
D [30/Jan/2014:14:52:31 -0600] [Job 15] Using image rendering resolution 600 dpi
D [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter gs (PID 5149)
D [30/Jan/2014:14:52:31 -0600] [Job 15] Started filter pstops (PID 5150)
D [30/Jan/2014:14:52:31 -0600] [Job 15] Page = 612x792; 14,14 to 598,778
D [30/Jan/2014:14:52:31 -0600] [Job 15] slow_collate=0, slow_duplex=0, slow_order=0
D [30/Jan/2014:14:52:31 -0600] [Job 15] Before copy_comments - %!PS-Adobe-3.0
D [30/Jan/2014:14:52:31 -0600] [Job 15] %!PS-Adobe-3.0
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%BoundingBox: 0 0 612 792
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%HiResBoundingBox: 0 0 612.00 792.00
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%Creator: GPL Ghostscript 910 (ps2write)
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%LanguageLevel: 2
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%CreationDate: D:20140130145231-06'00'
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%Pages: 1
D [30/Jan/2014:14:52:31 -0600] [Job 15] %%EndComments
D [30/Jan/2014:14:52:31 -0600] [Job 15] Before copy_prolog - %%BeginProlog
D [30/Jan/2014:14:52:31 -0600] [Job 15] Before copy_setup - %%Page: 1 1
D [30/Jan/2014:14:52:31 -0600] [Job 15] Before page loop - %%Page: 1 1
D [30/Jan/2014:14:52:31 -0600] [Job 15] Copying page 1...
D [30/Jan/2014:14:52:31 -0600] [Job 15] pagew = 583.7, pagel = 763.7
D [30/Jan/2014:14:52:31 -0600] [Job 15] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [30/Jan/2014:14:52:31 -0600] [Job 15] PageLeft = 14.2, PageRight = 597.8
D [30/Jan/2014:14:52:31 -0600] [Job 15] PageTop = 777.8, PageBottom = 14.2
D [30/Jan/2014:14:52:31 -0600] [Job 15] PageWidth = 612.0, PageLength = 792.0
D [30/Jan/2014:14:52:31 -0600] [Job 15] Wrote 1 pages...
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5150 (pstops) exited with no errors.
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5149 (gs) exited with no errors.
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5142 (/usr/lib/cups/filter/pdftops) exited with no errors.
D [30/Jan/2014:14:52:31 -0600] [Job 15] opvpOpenPrinter(410)
D [30/Jan/2014:14:52:31 -0600] [Job 15] CStubOpenPrinter(349)
D [30/Jan/2014:14:52:31 -0600] [Job 15] Error Response:ReqNo=0, SeqNo=1,opvpErrorNo=-1
D [30/Jan/2014:14:52:31 -0600] [Job 15] Connecting to 192.168.2.51:9100
I [30/Jan/2014:14:52:31 -0600] [Job 15] Connecting to printer.
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [30/Jan/2014:14:52:31 -0600] [Job 15] Set job-printer-state-message to "Connecting to printer.", current level=INFO
D [30/Jan/2014:14:52:31 -0600] Discarding unused job-progress event...
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
D [30/Jan/2014:14:52:31 -0600] [Job 15] STATE: -connecting-to-device
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
I [30/Jan/2014:14:52:31 -0600] [Job 15] Connected to printer.
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Job 15] Set job-printer-state-message to "Connected to printer.", current level=INFO
D [30/Jan/2014:14:52:31 -0600] [Job 15] Connected to 192.168.2.51:9100...
D [30/Jan/2014:14:52:31 -0600] [Job 15] backendRunLoop(print_fd=0, device_fd=6, snmp_fd=5, addr=0x7f63fcee8c88, use_bc=1, side_cb=0x7f63fb5631e0)
D [30/Jan/2014:14:52:31 -0600] Discarding unused job-progress event...
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5143 (/usr/lib/cups/filter/pstoufr2cpca) did not catch or ignore signal 13.
I [30/Jan/2014:14:52:31 -0600] [Job 15] Waiting for printer to finish.
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:31 -0600] [Job 15] Set job-printer-state-message to "Waiting for printer to finish.", current level=INFO
D [30/Jan/2014:14:52:31 -0600] Discarding unused job-progress event...
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
D [30/Jan/2014:14:52:31 -0600] [Job 15] PID 5144 (/usr/lib/cups/backend/socket) exited with no errors.
D [30/Jan/2014:14:52:31 -0600] [Job 15] time-at-completed=1391115151
D [30/Jan/2014:14:52:31 -0600] Discarding unused job-completed event...
I [30/Jan/2014:14:52:31 -0600] [Job 15] Job completed.
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:31 -0600] Discarding unused printer-state-changed event...
D [30/Jan/2014:14:52:31 -0600] cupsdMarkDirty(---J-)
D [30/Jan/2014:14:52:31 -0600] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:52:32 -0600] [Job 15] Unloading...
I [30/Jan/2014:14:53:02 -0600] Saving job.cache...
D [30/Jan/2014:14:53:02 -0600] cupsdSetBusyState: newbusy="Not busy", busy="Printing jobs and dirty files"
D [30/Jan/2014:14:53:02 -0600] Report: clients=0
D [30/Jan/2014:14:53:02 -0600] Report: jobs=8
D [30/Jan/2014:14:53:02 -0600] Report: jobs-active=0
D [30/Jan/2014:14:53:02 -0600] Report: printers=1
D [30/Jan/2014:14:53:02 -0600] Report: stringpool-string-count=2756
D [30/Jan/2014:14:53:02 -0600] Report: stringpool-alloc-bytes=8744
D [30/Jan/2014:14:53:02 -0600] Report: stringpool-total-bytes=49520
I believe this is all the relevant information from the log. I've not had any success finding this issue in the wiki or in the forums. Google's turned up no help. I'd really like getting this printer to work. Any help would be greatly appreciated.
Last edited by Yaro (2014-02-25 19:44:17)

I can't find that printer on the canon eu support website (canon uses model numbers on that site, not series designations) , and canon printers are not easy to get to work well on archlinux.
However there are 2 aur packages that provide the UFRII driver :
- cndrvcups-lb (built from source)
- cndrvcups-lb-bin (uses the binaries)

How do I install a new Canon MG3500 series printer on my IMac?

How do I install a new Canon MG 3500 series printer on my IMac? When I click on the cd rom icon I get a menu and I do not know what to do then.

For 10.6 see > Mac 101: Printing (Mac OS X v10.6)
For 10.8 see > OS X Mountain Lion: Set up a printer
For 10.9 see > OS X Mavericks: Set up a printer

I could not print using Canon MF8300C Series with Yosemite 10.10.1

After download and installing, I am not able to print using MF8300C Series. Help anyone?

So assuming that you have downloaded and installed the Canon MF Driver v10.3.0, have you been able to add the printer in Printers & Scanners? And if yes, does this printer go through the motions as if it is going to print that then fails?

Canon XH Series Levels

Similar Messages

Maybe you are looking for