Canopus advc110 now not recognizing analog input

anyone ever experience this? It just still stays blue screen. Its on analog in but no movie shows. It worked for 6 tapes now nothing? I trashed the plist, restarted, unplugged and plugged....nothing

Hi k
Are You sure that it is the analog imput that are a problem.
My first (spinal reflex thought) is Can the FW connector been turned 180 deg
wrong. One second and the A/D chip blows in the Canopus (expencive repair).
or
You might have tried to mix wrong set of Mac OS + QT versions + iDVD version.
But the there can be other things. I would look in my Camera probl list.
May be You find some help by it:
Mac:
- hardware
◊ Slow hard disk (fragmented: repair permissions, repair hard disk, use a faster hard disk)
◊ I wonder how full your Mac's hard disc is. (David Babsky) A near full hard disk prevents Import/Capture. 10% free is recommended + space for Import/Capture + work space (about 4 to
5 times the amount needed for Capture) eg on a 200Gb hard disk You need 20Gb + (one hour tape)
13Gb + 50Gb = about 80 to 90Gb free space.
◊ Disconnect all other ext devices (FW and USB) exept Camera (and keyboard + mouse) and try again
◊ Reset PRAM
◊ Bad RAM-chips
◊ disconnect Mac from powerline (not just switch off, really plug out) for a few minutes to reset FW ports
- software
◊ File-Vault is on - turn it off
◊ Something is occupying the CPU/System, like other programs, Internet etc.
◊ Do You have desktop pictures or screen or energy-savers active? Try turning them off.
◊ Updating - OS has to be a clean install - not an update eg from X.3.x to X.4.x (no good) OS X.4.0-5 needs a clean install to work (I use X.3.9)
◊ Updating QT and/or other updates (to 7 needs v6 to be cleaned out first) QT v.7.0.0-4 needs a clean install to work (I use 6.5.2)
◊ Have you tried the crazy fix: Open GarageBand, play a few notes, close it and reopen iMovie. The camera should import fine now. Sue/SDillini
◊ Running iDVD at the same time as iMovie can cause problems: (Lennart Thelander)
◊ If You also have installed FinalCut Express/pro there are possibly problems with this
iMovie:
◊ remove bookmarks in iMovie project
◊ Trash: com.apple.iMovie.plist and com.apple.iMovie3.plist : files (Xinram)
Connection:
◊ don’t Daisy chain Camcorder <--> external hard disk <--> Mac
◊ FW-wire cable, is it OK?
◊ USB/USB2 is NO GO !
◊ Cheque FW connection at Camera end. OK? (Adam Smith1)
◊ Cheque FW connection at Mac end. OK?
Camera:
◊ The Camera is set to VTR ? (not as when You ”film” record with it)
◊ You may be need to go to the Camera menu and select digital out.
◊ defective camera TRY IT ON ANOTHER MAC ! (if the A/D chip in the camera is harmed then it will say in iMovie that the camera is connected and You can forward resp. backward the tape but there will be no picture or sound just the blue screen).
◊ connect camera to power-line, not battery-only....(Karsten Schlüter)
◊ Canons don't allow daisychaining on firewire, make it "only device" on port (Karsten Schlüter)
◊ Cheque the menu on Your Camera so that it communicates with the FW digitally to Your Mac
◊ Date and Time is correct on Your Camera ?
Tape:
◊ Drop outs on the miniDV-tape - make a camera to camera copy on a tape which You have previous recorded with a time code (dummy recording).
◊ Break in the time-code on the miniDV tape (make a camera to camera copy on a tape which is pre-recorded with nothing/anything so that the tape has a time-code from beginning to the end)
◊ If You recorded in LP-mode (90 min on a standard 60 min tape with 12-bit sound). Try to change in iMovie pref. to import but not as individual clips. If this doesn’t work You have to make a Camera to Camera copy with the receiving Camera set to SP-mode and 16-bit sound.
More:
◊ follow advises here http://docs.info.apple.com/article.html?artnum=43000
◊ follow Grandmaster Dan's advice for Sony cameras here: http://www.danslagle.com/mac/iMovie/usage/5020.shtml
NEWS: Jerry Harris writes:
I know that in a lot of the new Sony HD cameras, iMovie requires that you turn iLink Conv off. I would look for a similar setting for your camera. This setting has to do with shooting a movie in one format, and using the camera to import as a different format. For instance, if you shoot HD footage and have iLink conv on - the camera will send DV to the computer etc...
So, case in point: look for a setting on your camera that has to do with the video format and see if that helps.
Good luck !!!
Yours Bengt W

Similar Messages

Recently, iTunes upgraded. My 7th generation iPod is now not recognized and I cannot sync. The troubleshooting talks about being visible in Windows (iPod is invisible) No other options and nothing about windows 8

Recently, iTunes upgraded. My 7th generation iPod is now not recognized and I cannot sync. The troubleshooting talks about being visible in Windows (iPod is invisible) No other options and nothing about windows 8

I have had similar issues with mine, happens mainly if I transfer songs and then decide to disconnect my iPod to listen to them with my IEMs (I use Interenet Explorer in my case and it is not neccessarely up when this happens, so I seriously doubt it is an issue conencted to the web browser). I have no patience for this so my trick is I try to eject it from iTunes, if that does not work, then I bring Windows explorer up, right mouse click on the iPod mounted drive and select Eject. It gives me the same warning but there is a third button selection called Continue. When I choose that it just disconnets the drive anyway and the iPod is finally disconnected. It seems to work each and every time I do it so this solution is fine for me. Would be intersting to see what the real root cause of this is because I started getting this problem with the newer iTunes 11.

TV not recognizing VGA input

I have this TV hooked up to my Arch machine and whenever I run xrandr the computer sees the output. The problem is, the TV is not recognizing any input so I can't change into VGA. Arch even detects the correct resolution and when I hook up a Debian machine it displays image with no problem.

Look into your TV manual for the supported resolutions
I had a experience a while back with a TV at my wife parents place where xrandr said that 1980x1080 (fullHD) was a supported resolution, but the screen just went blank. When I consulted the manual, I found out that the maximum supported resolution was in fact, 1366×768 (WXVGA), which worked almost perfectly (there was a missing pixel column on the right side, not too much of a trouble).
Short version: Check the TV specs, xrandr sometimes lies.

HT201210 I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with prompt to restore, phone w/screen with iTunes symbol and can't use.

I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with repeated prompts to restore phone. Now phone w/screen with iTunes symbol and USB cord can't use. It appears the phone has been restored, but I cannot activate it.
I disabled my anti-software, iTunes and computer software (microsoft vista) are both up to date, I restarted the computer several times. My usb ports are working properly. I followed the troubleshooting suggestions from apple.

yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries

Updated To Snow Leopard And Now Not RecogNizing Admin and password

Did a search, but didn't find the same thing(Just new system not SAVING passwords).
I updated from 10.5.8 to 10.6.1. First off, many apps wouldn't open(Spinning ball), and when going to update the OSX further, the admin/password screen popped up, with no admin name, as well as no password. When inputting info, it says they're incorrect. I double-checked my account info, and it's just not recognizing me. I hesitate to do a fresh install because of the time it will take with all the apps to re-install(Plus I wiped HD 2 weeks ago). Any suggestions are appreciated.

Since this happened after installation, this forum seemed appropriate. However, after looking around more, found that a number of people(Although the minority)are having the same problem, and are talking in account and login, so off I go.

Garageband not recognizing external inputs from minijack entrance

Hello
I need to connect a sound mixer to the Macbook via minijack audio entrance. Even I have changed the settings for audio input in System Preferences (from internal mic to external line) garageband is not recognizing any external input and internal microphoen is always active.
Someone had the same problem?
Thankx

Change the input in Garageband > Preferences > Audio Midi.

I can not read Analog input (a square wave)

I am programming with Labview 7.1 on FPGA. The hardware is PCI7831. With CB-68LP connector, I connect analog input (a square wave generator) to AI0+(68) and AIGND0(67). I try to read it with waveform chart. But I can't get a square wave on the screen. I did check the square wave generator's output. It is correct. The connector CB-68LP connected with PCI7831 on analog port.
I am runing the program on emulation, not on real FPGA.
Thanks

Signal generator I used is 3010 function generator for BK precision. It is an old instrument. I probed output signal from this generator on oscilloscope with signal generator output conected to oscilloscope probe (+) and signal generator ground to probe (groud). It is a square wave.
I suspect the teminal I used for I/O port to PCI7831. Because my coworkers installed the hardware for me, he is absent recently. The terminal is CB-68LP from NI with numbers ( 1 to 68) to specify each connector on it. And I got a SCB-68 Quick Reference Label sheet on my desk to specify numbers correspanding I/O port (for example, 68 -- AI0+). I suspect if this SCB-68 Quick Reference Label sheet matches the terminal CB-68LP?
I will talk to my coworkers next week.
jason

Application exe not displaying analog input measurements

i am using the compactDAQ cDAQ 9172, after building the exe all the other digital and analog output ports are working properly whereas the analog input section is displaying the value as Zero, if i read read this channel from the max, it reads the values without any errors.what might be the issues.

Hi Kodeeswar:
I have a couple suggestions first try to create your analog input application with no digital or analog output task just "analog input" and then build the executable and try it again; second if it is possible for you please try updating to the new drivers of (NI DAQmx), and third reinstalling the last version of the “labview run time engine”. Also the 9172 is the chassis so which module are you using to handle the Analog Input application? To synchronize multiple modules or chassis if this is your case these links might be able to help you so please take a look at: NI CompactDAQ Module Synchronization, Synchronized Continuous Analog Input Across. I hope I was able to help you.
Jaime Hoffiz
National Instruments
Product Expert
Digital Multimeters and LCR Meters

Please Help! MBP shutting off when plugged in, now not recognizing MagSafe Adapter

I started seeing this problem a few weeks ago, my MacBook Pro just shut off spontaneously while watching a video full-screen. I turned it back on and the problem went away for a while. But now, the shut-downs happen more frequently. It doesn't matter if the MBP is running off of the battery or if its running off of the AC cord, it will just shut off. No warning. No standard shut-down process, everything just stops and a balck screen shows up. After it shuts off, it takes a few seconds to get it to restart, and when it does, the computer's date and time will be reset to some date in 2000. Very strange, I've had this computer for a year and I know people with the same model that have had no such problems. The battery is at 168 cylces (I use this for school, so it was being used everyday throughout the last two semesters), and the Condition is listed as Normal in the System profiler, so I doubt the problem is with the battery, but I could be wrong. I've seen posts about the RAM/PRAM causing the date/time resets. Nevertheless, the MBP has been running normally on the battery, battery life is still the same length of time as it was when I first got the computer, and runs smoothly. Up until last night, the AC MagSafe Adapter was still working, so I only used that as the power source. Everything was fine, but the MBP shut off once or twice while it was plugged in within the last month or so, but the AC would still have a green light, indicating the computer was still recognizing the power source. Now, I can't get the MagSafe to be rocognized at all. The computer is running on battery only, and I've tried resetting the SMC, but I'm unsure if it worked since the MagSafe is still unrecognized. When its plugged in, the System Profiler says it is not connected and not charging.
I'm running on Mac OS X 10.6.8, a 2.4 GHz Intel Core 2 Duo, with a 4GB memory (of which less that half is used). Computer usage is low, so its not like I'm running several programs at once, at most, its two or three at a time, for short periods. My MBP is a 13" aluminum body, doesn't seem to be overheating, has worked fine after long periods of being on and getting hot, I always let it cool down after I feel it getting too warm.
Please help if you can! Thank you!

Battery Information:
Model Information:
Manufacturer:          DP
Device name:          bq20z451
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0201
Hardware Revision:          0002
Cell Revision:          0164
Charge Information:
Charge remaining (mAh):          2037
Fully charged:          No
Charging:          No
Full charge capacity (mAh):          5078
Health Information:
Cycle count:          168
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -917
Voltage (mV):          11235
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          5
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Wake On LAN:          Yes
Display Sleep Uses Dim:          Yes
Battery Power:
System Sleep Timer (Minutes):          5
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          1
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          No
Charging:          No
thanks for the quick reply~

Television Not Recognizing HDMI Input

I recently bought a Toshiba 24L4200U and in the few weeks I've had it, I have had no trouble connecting it to my Dell laptop. This afternoon, I left the two connected and turned the TV off before I left the house, with the display reverting to the laptop as it is supposed to (I have it configured to automatically display on the TV when connected). When I returned this evening, I turned on the TV, and though the computer recognized that it was connected to an external display, the TV displayed the "no signal" prompt.
I have attempted:
Unplugging/plugging back in the TV
Unplugging/plugging back in the computer
Plugging into the HDMI 2 input (I normally use HDMI 1) and changing the input on the TV
Plugging back into the HDMI 1 unput and changing the input on the TV
Restarting computer, turning TV off, and plugging both back in (computer first, then TV)
Each time the computer tells me it is connected to an external display, yet it retains the display. The TV gives no indication that it is connected to anything. I have not changed any menu settings in the interim. This TV is way too new to be having problems. Does anyone have any ideas?

I would double-check another HDMI device with the TV. If it works, then it's likely an issue with the laptop. If it doesn't work, you'll know it's likely an issue with the TV. If it is the TV, you could try resetting it to factory settings to see if that helps.
- Peter

Firewire port previously working now not recognized

Hello,
I understand this particular issue has been discussed at length on this forum and in other places but none of the solutions have yielded any success for me and I see this is often the case for others. So, I'm posting the question again in hopes that there is an Apple guru out there who has figured this one out. (All relevant specs below.)
Problem: Firewire port was working fine for downloading video from a Panasonic PV-GS320 into iMovie 8.0 on an iMac 10.5.8. Then, suddenly the firewire port was no longer recognized:
FireWire Bus:
Warning:          Unable to list FireWire devices.
Maximum Speed:          Up to 800 Mb/sec
The problem cannot be with the camera or cable as I can swap them over to an iBook 10.4 and the camera and firewire download perfectly there.
I have run AHT. Test results show no hardware problems.
I've tried all of these suggestions:
http://docs.info.apple.com/article.html?artnum=88338
http://macperformanceguide.com/blog/2011/20110808_0_Firewire800--howto.html
and quite a number of other solutions that involve rebooting SMC and PRAM but no dice.
I'm guessing this might be some kind of driver or software issue. There's got to be a simple solution to kick this thing in the butt and get it working again. I'd prefer not to do an OS re-install if I can avoid it.
Thanks much! Below are the specs:
iMac: 10.5.8
2.4 GHz Intel Core 2 Duo
4 GB 667 MHz DDR2 SDRAM
Firewire: 800 Mb/sec

Hi Tom,
I've had an opportunity to try all of the options listed on those links. I did omit one however, the Combo Update for 10.5.8. I hesitate to pursue this one b/c from what I can understand this 1GB's worth of update is basically a reinstall of the OS. I'd prefer not to take such a drastic action b/c I'm in the middle of editing a documentary and I don't want any other hardware or software to malfunction or alter behavior while I'm in mid-stream.
Let me know if I'm mistaken about this. As it stands the Combo Update is my last option, otherwise I'm just going to move forward with a dead port.
Just as a sidenote: the behavior of the firewire recognition has changed. Now, the system does not recognize the firewire plugged in at all. I used to get an error message, now nothing.
Thanks Tom and BDAqua.
If anyone else is reading this post I'd like to hear from someone who has experienced the same problem and found a/the solution.
Best Regards,
-J Mann

My IPOD Classic 160GB is now not recognized by iTunes and will not sync

I have a 160GB IPOD Classic that now will not sync with iTunes. Both the iPod and iTunes have up to date software versions and I am connecting thru a MAcBook Pro running OS X 10.10.2. I have synced this iPod i the past with no problems and now it does not appear in the iTunes source list.
I have tried the rest options that the Troubleshooting guide suggested and now at a loss for the next step.

This is a problem caused by 10.10.2, only way to fix it at the moment is to revert to 10.10.1.
Quite a few threads on it on other sites and only that one solution. Make sure you raise a feedback to apple though.

My DVD drive is now not recognized in boot camp.

I just found the Matshita DVD-R UJ-898 is no longer recognized in Boot Camp Win 7. Tried uninstalling in Device Manager but the driver fails to load upon restart and also fails when trying to update. The DVD drive works fine in OSX Lion so I know the drive is ok. It worked fine when I first installed Windows 7 in Boot camp last year. This is an early 2011 macbook Pro 17 with Lion. All updates have been installed. Hadn't used the drive in Win 7 for a long time so not sure when it ceased to work.

Found the solution. Microsoft Fix-It found and made the driver repairs automatically.

I have a 3g iphone i updated phone now not recognizing sim card

phone worked good till did update now wont recognize sim cared dont know what to do cant do any thing with it help i have t mobiel siervice any help with this problem would be great lol it ***** not bein abel to use it at all

Identify iPhone Models
http://support.apple.com/kb/HT3939
It is unclear whether you have an iPhone 3G or 3Gs...
If a 3G... iOS 4.2.1 is as high as it will go...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

Can not get analog input with SCC-SG04

I have used the wizard and wrote a simple AI input channel loop with a digital readout. The voltage doesn't change.

Well, I guess I'm not sure what all you have tried or how you have things set or configured. I would first try verifying the input through the test panels in MAX. Make sure you have your DAQ card set to NRSE mode, make sure you have your SC termination equipment set as the "Accessory" to the DAQ card under it's properties, double check your connections, then see if you can read the voltage through the MAX test panels. After you can read the voltage there, then you can try using a program. I hope this helps!
Russell

Canopus advc110 now not recognizing analog input

Similar Messages

Maybe you are looking for