Canoscan 4400f not recognized by image capture

My imac with lion installed will not recognize my canoscan 4400f scanner. My white macbook is fine.
I have tried using Cannon software and it tells me no driver is found.

I had the same issue and when I searched for a solution, all I found was your question. So I messed around a bit and got it working.
I'm no computer engineer, so I did about 3 things at once rather than 1 at a time. Thus, I don't know if it was one step or a series of steps that got things working again so I'll tell you what I did and you can take it from there.
I had the iphone 4 connected with the cable. I had image capture running. It listed the proper number of images but I couldn't see the thumbnails and when I downloaded all, the newest ones didn't download.
In image capture, I went to the devices menu and clicked "browse devices" and unchecked iphone. Then I did a hard reset of the iphone by pressing the home and power button at the same time until the apple logo appeared. Image capture said no devices were connected. After the reboot (while still plugged into the USB), image capture showed my phone and all the thumbnails correctly.
I'm guessing it was just the reboot that did the trick.
good luck.

Similar Messages

  • Canon PIXMA 860 and 560 not recognized by Image Capture

    I can scan from the printers to my MacBook. And I go to System Prefernces / Printers and Faxes and both are shown as printers and as scanners. I can open from their and scan but when I open image capture it doesn't find any scanners.
    I down loaded and installed both the newest canon printer and scanner drivers as well as the newest ICA driver. Still they are not recognized.
    What am I missing?

    ATC7 wrote:
    Just for testing purposes, I removed the canon printer, removed all canon software and updates from my system and then used the original CD that came with my 870 to reinstall the printer and lo and behold, Image Capture started working again for wireless scanning.
    Hello and thanks for the feedback.
    There are two scanner drivers available for many of the new models of Canon AIOs. There is the ICA driver and the Canon scanner driver.
    During my tests on clean builds of 10.6.x I found that my Canon AIOs were able to print and scan via wireless by simply installing the Canon update provided by Apple. This update consisted of the then latest printer driver for many models of Canon AIO and inkjet and the ICA driver. Canon's scanner driver was not included as part of this download from Apple.
    The ICA driver is installed in HD > Library > Image Capture > Devices and the package is called Canon IJScanner1. Later versions of the ICA driver also installed another package, Canon IJScanner2. These ICA drivers provide a minimal amount of scanning selections and only appear to work with Image Capture and Preview. Other applications like Canon's own MP Navigator and Adobe Acrobat Pro will not scan with just the ICA driver installed. The Canon scanner driver for the respective model is required.
    From what you have said and from my own testing I propose that the original CD did not contain the ICA driver but the Canon scanner driver for the MX870. And with only this driver installed you were able to scan using Image Capture via the wireless. I don't recall ever testing a 10.6 build where only the Canon scanner driver was installed and not the ICA driver (it is present by default on 10.6 but only has older models of Canon AIO's - your MX870 is not there). Had I tested this I believe that I would have been able to scan via wireless using Image Capture.
    I also propose that once you installed the Canon v2.4.1 update, which contains a version of the ICA driver package that is also available from Canon web sites, then Image Capture stopped using the Canon MX870 scanner driver and used the ICA driver instead, thus stopping you from wireless scanning.
    Right now I am using a new build of 10.6.6 on my MBPro. So that I could print to my MP990 at home and an MG6150 at work I simply installed the v2.4.1 update and have printer and scanner queues in Print & Fax for both. I have not installed scanner drivers for either device and at home with my MP990 Image Capture does not show any device being available, while Preview does show the MP990 once I select 'Import from Scanner > Include Networked Devices'. Also, Acrobat Pro 9 does not show my MP990 being available.
    And with regards to the v2.4.1 update, the drivers included are provided by Canon to Apple, just as the other vendor drivers are provided to Apple, to make life easier for us Mac users. The drivers are available individually and get downloaded and installed automatically when the respective model is connected to the Mac and no local driver is present. As for the package including all these individual vendor drivers, this would be created by Apple.
    Pahu

  • IPhone 4 not recognized by Image Capture

    help! so i'm trying to transfer photos i've taken with my iphone to my mac. when i open image capture, the iphone doesn't pop up as a recognizable device. tried to google the issue and to no avail... any help is appreciated! thanks

    I had the same issue and when I searched for a solution, all I found was your question. So I messed around a bit and got it working.
    I'm no computer engineer, so I did about 3 things at once rather than 1 at a time. Thus, I don't know if it was one step or a series of steps that got things working again so I'll tell you what I did and you can take it from there.
    I had the iphone 4 connected with the cable. I had image capture running. It listed the proper number of images but I couldn't see the thumbnails and when I downloaded all, the newest ones didn't download.
    In image capture, I went to the devices menu and clicked "browse devices" and unchecked iphone. Then I did a hard reset of the iphone by pressing the home and power button at the same time until the apple logo appeared. Image capture said no devices were connected. After the reboot (while still plugged into the USB), image capture showed my phone and all the thumbnails correctly.
    I'm guessing it was just the reboot that did the trick.
    good luck.

  • I have my photos  iPhoto but my iPhoto library is empty. when clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

    I have my photos in  iPhoto but my iPhoto library is empty.When clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

    When what is clicked?
    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Iphone and iPad not appearing in Image Capture

    Hi
    Since upgrading my iPhones and iPads to 8.1.1 I no longer see them in the Image Capture program.
    I liked this program for mass deleting bad photos.

    Hello adambravo,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Best of luck,
    Mario

  • Canon MP560 no longer recognized by Image Capture/Preview

    I have a Canon MP560 wireless printer/scanner and for some reason the scanner can no longer be seen by either Image Capture, Preview, or the Canon mp560 scanner toolbox under the Print menu. This happened either after installing 10.6.5 or after installing the latest Canon Printer Driver updates (I am not sure which caused it, as I did both updates recently...)
    It can, however, be seen by MP Navigator 3.0.
    Anyone found a fix for this yet?
    thanks

    Okay, have done some testing and found some interesting things.
    With a new install of 10.6.5 (selecting not to add any printers) I was not able to locate any Canon AIO via wireless. The Default Add Printer pane was empty so it looks like the printer and scanner driver needs to be present on the Mac. For the printer this is understood, as the Canon protocol 'canonijnetwork' is not present in the BJPrinters folder located in Library > Printers > Canon (due to the customized installation the Canon folder was not even present). In checking the Image Capture folder (HD > Library) I also found that the Devices folder was missing. Inside of here you would normally find the Canon IJScanner package/s for a standard installation of 10.6. But with the customized install this package was not present and appears to influence the Mac's ability to 'see' the networked scanner component. To confirm this, I installed the Canon v2.4.1 driver update, which in turn created the Devices folder in Image Capture and consequently made the scanner component appear in the Default Add Printer view.
    Another observation was that prior to installing the Canon v2.4.1 update, Image Capture would still display the MP on the network, but under the Shared menu - not the Devices menu. So even without the ICA driver installed nor the MP scanner driver installed, I was still able to use Image Capture to scan a document from the wireless MP. The same was true for Preview in as far as the Networked Scanner selection showed all the MP's present on the wireless network.
    At this stage I believe that the Canon driver update you mentioned may have contributed to part, if not all, of your current symptom. The install.log does have a record of what this update installs. If you checked it there may be record of the installer not completing correctly. In any case I assume that for your Mac this update did not complete correctly and is causing the problem. So one suggestion would be to run the [Canon Driver v2.4.1 update|http://support.apple.com/kb/DL899] again (or for the first time if you simply used Software Update previously) to see if this repairs the CanonIJScanner packages.

  • I can print to a Lexmark X4550, but not scan (with Image Capture)

    Following tips (by "Lexmark Listens" and others) I succeded in printing (via USB and wifi) to a Lexmark X4550.
    But when scanning (via USB) using the Image Capture app (included in Mac OS), Image Capture sees the scanner a couple of seconds, then complains that no scanner is connected (although it still is).
    This happens with a MacBook (Pro), but not with another MacBook (white).
    I tried (not necessarily in this order):
    - reboot
    - repair disk permissions
    - re-installing drivers (both printer driver and "Image Capture Application Scan Driver for for 10.6.8 and later Mac OS") from Lexmark support site.
    - running Mac OS software update (which updated the printer driver to version 2.8]
    - resetting the printing system: http://support.apple.com/kb/HT1341
    How can I completely remove all files related to Lexmark printers&scanners and try again installing from a clean state?
    (I see in other posts that a Lexmark Uninstaller is sometimes located in HD/Library/Printers/Lexmark/YEAR/ ; I used to have one here, but it was removed during previous attempts at getting the scanner working ; and anyway when I run this Uninstaller at the time, it did not completely clean the /Printer/Lexmark)
    My problem is very similar to this one described in this bug report in Lexmark knowledge base:
    http://bit.ly/MOR9bd
    But the patch proposed is "For Mac OS X 10.6 only" and titled "LexmarkPro800-Pro900SeriesQFE1.0.0.dmg" so I don't think it would work for a Lexmark X4550. (Indeed I installed this patch and the problem is still there).
    As for the workaround suggested, "When using Apple's Image Capture application, do not use the "Show Details" option [...]", I can't get it to work: as soon as I launch Image Capture, it starts scanning (a preview) and the "Show Details" bouton is grayed out.
    I've already spent many hours trying to get this printer-scanner to work with my Mac.
    Any suggestion would be very helpful!

    Same issue, sort of.  After ML upgrade, Lexmark x264dn fails to register as a printer & scanner, there is no scan tab anymore.   Also, image capture application is stuck in a crash loop until I disable mDNS (bonjour) on the printer.   Still, it does not register as a scanner anywhere (protoshop, image capture, preview...)
    I have installed all the package scripts from Lexmark's Mountain Lion support page.   No dice.

  • PS E9 not recognized by image browser.

    I recently updated from PS E7 to E9. When using E7, my image browser (Nikon View NX2) worked properly. After installing E9, NX2 no longer connects to E9. When right clicking on an image in the browser, it gives ask for which program to open the image with. One of the selections is PS Elements (Editor). When clicking on that option, a dialog box opens and says the program does not exist.. I also have CS2, and that works properly with View NX2. I am using a PC with Windows 7, 32 bit. Help please.
    Thanks,
    Gerry
    PROBLEM HAS BEEN CORRECTED. 20Apr2012 @ 2:45 PM PST
    Gerry

    Try this fix posted by user Robin Johnson:
    Robin Johnson
    Re: ios update problem - 7.1 11D167 iphoto not picking up new photos
    This solved my questionRe: ios update problem - 7.1 11D167 iphoto not picking up new photos
    Mar 20, 2014 7:15 AM (in response to JdinPa)
    I figured out the fix for the Mac users having this problem. I connected my iPhone to my iMac and started iTunes. A dialogue came up in iTunes, I OK'd that and then OK'd the usual "Do you trust this Mac" that comes up on my iPhone.
    Suddenly Image Capture launched itself and there were all my photos, ready to be downloaded.

  • Epson Photo RX600 no longer recognized by Image Capture but still prints

    Recently my Epson Photo RX600 disappeared from Image Capture (in between doing an overview and final scan) and I can no longer seem to find/assign it. I am still able to print to the device through my Mac and to scan/copy using the buttons on the device, but no luck on scanning through the Mac. Any advice?
    Thanks.

    My name is Syd and I work for Epson America, Inc.
    If nothing has been changed on the computer itself, you may want to re-install the ICA scanner driver and restart. If this does not work and the RX600 is connected directly to your Mac USB port, we would recommend contacting tech support to more quickly determine the issue as there are variables involved. The direct number is 562-276-4382.
    Here to help,
    Syd

  • IPhone only shows up as a device in iTunes. Not in iPhoto, Image Capture, or anything else.

    Right now, only iTunes sees my iPhone connnected to it. iPhoto doesn't see it, and neither does Image Capture or Xcode. I can sync with iTunes just fine, but I can't get transfer photos from my phone to my MacMini.
    I have an iPhone 4 (not 4S) that I recently upgraded to IOS 5. My MacMini is running Lion (10.7.2) & was just purchased last month.

    Just checked it. The settings in iPhoto are for "Connecting camera opens: iPhoto"
    When I connect the phone, iPhoto will launch, but the iPhone will not show up under devices.
    Where's the 2012 version of SCSI Probe when I need it?

  • Aperture not reading EXIF Image Capture time properly

    Hi
    I have recently imported a folder of Raw/JPEG files into Aperture as a new project.  They previously had been managed in Media Pro.  When I sorted the images by date, I found that some (but not all) Raw files didn't have the image capture time recognised.  I.e. the image date time was shown as 'Date X time 00:00:00'.  These are Olympus ORF files (from the E-M5 and XZ-1.  The JPEG files are properly date-stamped.
    I have tried to alter the image date/time as per the Metadata menu command.  However, although looks like it is doing the job, when next I open the library there is no change to the information and the image is still sorted in the wrong place if I sort by image date.
    The wierd thing is that the capture time is correctly shown in the image EXIF (I can see it in EXIF Editor, Olympus Viewer and in Media Pro), but that it isn't being seen by Aperture or OS X properly.  Something somewhere has obviously got muddled.  Any ideas on how this can be sorted out?  It has been driving me mad trying to sort this out!
    Andrew

    Here is another example of this effect, but with a different type of subject matter: a ball. The original is a raw file from a Canon 350D/Digital Rebel.
    In Aperture's Zoom mode there is a pattern on the ball that looks like Maze Craze:
    The pattern is maintained to a lesser degree as the image is sized down:
    Exported as Original Size png:
    Exported as Half Size png:
    Now, as pointed out in the earlier post, the real problem is that other apps do not have this problem. The following is from ACR:
    Aside from the pattern, Aperture does look better, but the pattern is nasty and almost makes the image unusable.
    Will
    Dual Core 2.3GHz PowerMac G5, 2GB RAM, GeForce 6600   Mac OS X (10.4.6)   Canon Digital Rebel XT, Edirol UA-5
    Dual Core 2.3GHz PowerMac G5, 2GB RAM, GeForce 6600   Mac OS X (10.4.6)   Canon Digital Rebel XT, Edirol UA-5
    Dual Core 2.3GHz PowerMac G5, 2GB RAM, GeForce 6600   Mac OS X (10.4.6)   Canon Digital Rebel XT, Edirol UA-5

  • My MFU does not appear in Image Capture scanner list

    Hi,
    I have a brand new Samsung XPress C460FW/TEG MFU connected over WLAN. This appears perfectly in the list in the Printer and Scanner app, the Samsung's own scan software does see it as well. As it is acessible from Hamrick's ViewScan.
    But
    In the system own Image Capture App it is not there.
    What am I doing wrong? How can I expose the scanner to Imapge Capture? It was there before I upgradet to Yosemite. Now I have 10.10.2
    Regards and many thanks in advance.

    To scan with Image Capture your Samsung needs an ICA driver. The software from Samsung and VueScan most likely support an alternate scanner driver language known as TWAIN. So if you want to scan with Image Capture you need to check with Samsung if they have an ICA driver for your new device.

  • Photo not showing on image capture and iphoto

    Dear all
    IPhone5S Gold
    16gb
    whenever i take a new photo
    it wouldn't show up in image capture and iphoto
    but the photos are in my phone
    and i want to transfer the photo to my macbook pro
    I think its got some problem when my iphone5s
    the image capture and iphoto can scan any new photos of my iphone 5s
    what can i do about this problem?
    Thank you

    Hello edison_hi,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Unable to import photos to computer
    http://support.apple.com/kb/ts3195
    Have a nice day,
    Mario

  • ARD not recognizing disk image

    I used Network Disk Utility to make an image of my powerbook to set up clients. When I try to set the startup disk to the image it always fails. The image does not appear in the list. So I tried to set it to a special volume but to no avail. I have searched the manual and website for the correct procedure. All I find is "set the client's startup disk to [point to the image." How do I do this? I am a new user of ARD and deperately need help.

    First, am I correct in presuming that you have a Mac OS X Server set up with NetBoot running and your image enabled? If not, that's your problem. You can only boot a workstation to a disk image served by NetBoot.
    If you do have this set up, can you successfully boot from the image when you're sitting at a workstation (i.e. not setting it through ARD)?

  • Image Capture does does not recognize iPhone 3GS

    Greetings,
    Something is amiss with one of my profiles on my PowerMac G5 and the Image Capture.app no longer recognizes my iPhone 3GS when I plug it in. The phone is recognized in other profiles so it’s not a phone of computer problem. Without the device recognition I can’t easily move images to iPhoto or Lightroom.
    Thanks,
    Steve

    I wish it was as simple as rebooting. I was on the phone with Apple Support for more than 3 hrs today and we were not able to resolve the problem (yet).
    Approx 2 weeks ago iPhoto, Aperture and Image Capture all stopped recognizing my iPhone. Oddly, iTunes has no problem recognizing the iPhone. Here are just a few of the things we tried but didn't get the apps to see the iPhone again:
    - Removed and deleted all photos on camera roll using a windows machine
    - Removed all other photos synced between my iMac and iPhone
    - Made sure an image existed on the camera roll
    - Recorded some video on iPhone and then tried to get iMovie to recognize device
    - Restored (gulp) the device followed by a restore from back-up
    - Restored again (double gulp) but this time to factory settings and kept the device as a "new iPhone"
    - Logged on as different users
    and on and on.
    Also, after noting that my machine refused to send a systems report to my Sr Advisor at Apple, he suggests we re-install Lion (ack).  But when we went to access the Recovery Partition we realized it wasn't there.
    So now I wait for Lion to arrive on one of those nifty Apple thumb drives for me to try re-installing ;-(
    The following screen grab show my iPhone in iTunes but not recognized by Image Capture. URGH!

Maybe you are looking for