Canoscan 9000f and Mac OS.10.8.2 not compatible. Driver not found on either canon us or uk sites.

Canoscan 9000f and Mac OSX 10.8.2 not compatible. Install CD gives error. It said when I bought it it would work on Mac OSX 10.8. Searched for drivers on both Canon US and UK sites. Not found. What to do? Thank you.

Hi Aleksandra, Drivers for 10.8 are on the website. Here are the basic steps to navigate to the downloads:
1. Visit Canon's web site at:
http://www.canontechsupport.com
2. Click on SUPPORT & DRIVERS. On the Support & Drivers page, select your model in the following manner:
     a. From the first menu, select SCANNERS.
     b. From the second menu, select CANOSCAN Series.
     c. From the third menu, click DRIVERS & SOFTWARE under your model.
3. Select Windows or Macintosh as needed using the drop down menu SELECT OPERATING SYSTEM.
4. Select your specific version of Windows or Macintosh using the drop down menu SELECT OS VERSION.
5. Click on DRIVERS.
6. Click on the file you need.
7. Instructions for completing the download and installation will appear on the page that follows. You will also see a disclaimer at the bottom. Review the disclaimer, and click I AGREE - BEGIN DOWNLOAD.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

HP 8610 AND MAC OS X 10.4.11 COMPATIBLE?

HP 8610 AND MAC OS X 10.4.11 COMPATIBLE?

Check whether or not your system supports 10.6.
http://store.hp.com/webapp/wcs/stores/servlet/us/en/pdp/printers/officejet-pro-8 610-e-all-in-one-a7f64a-b1h?jumpid=re_r11662_redirect_ETR&ts=20150123223820_33qh kvhsfWpe&HP-Officejet-Pro-8610-e-All-in-One-Printer
I do not see the printer listed here.
http://gimp-print.sourceforge.net/p_Supported_Printers.php
http://gimp-print.sourceforge.net/MacOSX.php
I have the Cannon pixma mg3120 works fine for me with mac os x 10.4.11. I am able to refill the color ink jet cartridge. Press reset + color copy button for 10 seconds.
Mac OS® X v10.4.11 to v10.6.x
http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all _in_one_inkjet_printers/pixma_mg3120

Driver Problems with CanoScan 9000F and Mountain Lion?

I have recently taken delivery of a MacBookPro with Mountain Lion. I used Migration Assistant from an older MacBook and all seems to have gone well except for my CanoScan 9000F. This refused to load the MP Navigation software, even though I downloaded the latest drivers. I am a heavy user of the Scanner as I move towards a Paperless Office .
Does anyone have experience of this combination of Scanner and Lap Top? Thank you.

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

When I back up my Mac Book Pro to an external hard drive not all files are backed up. Can anyone help please?

When I try to back up my Mac Book Pro to an external hard drive some of the files are backed up but not all files are backed up. I don't understand. Can anyone help please?

I've used time machine in the past and couldn't get to the bottom of the problem so I've recently downloaded and am using carbon copy cloner and I get the same problem. The files that are missing are just word and number documents. Seems so odd.
Thanks for replying
John

HP 2600n and Mac OS X 10.2.8: Compatible?

According to the HP website they are indeed compatible. Unfortunately, I can't confirm that. I've downloaded the drivers from HP's site and I can't install them. I get the same Error 95, unable to mount drive error every time. Any ideas are greatly appreciated as always. I am trying to print to the HP Color Laserjet 2600n using an IP address. Thanks so much.

I have the same problem.
Downloaded the HP2600n MAC drivers and unpacked the installer (it says complete, it doesn't tell me of course where the files have been unpacked too???). Then when I go to install the printer via TCP/IPP (Or IPP as MACs call it) the 2600n doesn't appear in the list.
There is a plethora of other printers and printer drivers, but not the one i require.
Any help would be appreciated.

Mac PRo with raid card shipped with drive not suitable for raid?

Hi all,
I ordered a Mac Pro with raid card and a 1TB hard drive. The drive which came in the computer was WDC WD1001FALS which is not a hard drive rated for raid usage. On Western Digital's site they suggest using WD1002FBYS.
Is the model WD1001FALS the correct drive which Apple ships although one ordered the raid card?

The WD 640GB Blue, and WD 1TB Black are the only drive options for the mac pro; that's what you choose.
The RE3 (or FBYS) is not an option sold through apple. Buying the raid card, is not going to change the drive.
On whether to use the RE3 over the Blacks, it depends on how you will be using it. From what I've heard, the Blacks are enterprise drives themselves; basically with just a less robust firmware (no TLER). If you will have the drives on 24/7 in a raid 5, then yes, RE3 will probably be better. If not, I think the black will suffice; note the blacks are GREAT drives by themselves anyway.
The apple raid card can connect to both SATA and SAS drives internally, however most times people buying the raid card want to use it for SAS drives. There are a lot more cheaper and possibly a lot more stable options then apple's raid card if you are looking to use SATA drives.
Check amug:
http://www.amug.org/
A common problem with the apple raid card is the battery:
http://store.apple.com/us/product/MA849Z/B?mco=NDc1ODczNw
Lastly about enterprise drives, truthfully I don't see the difference really. I have enterprise drives in a 8-drive raid5 config running 24/7 as a server. 2 drives died on me after about 4 months. To top it off, they died within 10 min of each other, crushing the raid to pieces. Granted they were Seagate ES.2's, it's understandable
The boot drive of the server is a stock desktop WD drive and running 24/7. It's been running for almost 4 years straight.

Mac osx 10.8.1 update printer driver not available

We are getting a message asking to update the printer (HP Laserjet 1320). If we accept it searches for the update and returns the message "...unavailable".
OK, so how do stop that message window from popping up?

Normally I do not shut down my iMac - rather I just let it sleep as per System Preferences > Energy Saver settings. This morning I did a complete shut down and then restarted and the problem has gone away again. Then I did a bunch of testing by launching all the usual applications I might have run since updating to 10.8.2 to see if one of these triggers the problem. After each new application launch I turned on the printer to see if the problem would occur (and then shut down the printer before the next application launch.) So far I haven't found what triggers this but once triggered it seems to then occur with each printer start (until I shut down the iMac again I guess.) I will have to keep a close watch on what I launch for a while to see what I have missed.

Rescue and Recovery to clone to Crucial Msata SSD drive Not Working Error

I have a T520 andI did a complete backup through Rescue and Recovery I did the back up to DVD. I then checked all the DVDs They all have data and are almost full. The T520 came with a Toshiba 500 gig HD, I have added a Crucial Msata 128 GiG, The T520 is running windows 7, and I have loaded the programs I use, and almost no data. The DVDs from the complete back up are marked as follows:
Final SP Backup
Startup Disk
1c
2c
3c
4c
Final Q
Final C
All DVDs are full I Take out the Toshiba 500Gig put in my Crucial Msata Drive Boot with the Startup Disk select complete restore select from CD/DVD The T520 Asks for all the disks Some are only used for a few mnutes then after I put in final C It says it is going to reboot select drive after reboot and then I get the error screen:
1. Insert Your windows installation Disc and restart your computer
2. Choose your language settings
3 Click Repair your computer
File: \windows\system32\winload.exe
Status: 0xc000000f
The Selected Entry could not be loaded because the application os missing or corrupt.
When you receive a laptop from Lenovo they do not give you Windows 7 discs. So there is no way to do a srt. All I want to do is get the Msata drive to boot and run the os and all my loaded programs. This way it is faster and more efficient. Is there a simpler way. Please help I have only got about 40 hours into this mess. Thanks for any help from the experts.
Chipman

I'm a bit confused about the process you are using and what you are trying to do.
If I understand you,
you currently have a working 500gb hdd with the operating system, your programs and your data.
You want to move your operating system to the mSATA drive and have your computer boot from there.
you have made a set of recovery disks using the Lenovo program. This is intended to restore your system to its original state (no data or extra programs)
Here are a couple of options
You can create a "backup and recovery" set of DVD's using the Windows built in programs (click the 'Start' button, then type 'backup' into the search box at the bottom) that will back up all of your system (OS, programs, data, setting etc.)
Use a stand alone program like Acronis to create a clone of your current disk
Thereafter
Remove your current 500gb drive from your machine
Install the mSATA drive
Restore whatever image you want (the Lenovo recovery, the Windows restore or the Acronis [or whatever program you used] image)
Reinstall your 500gb hdd and rename that drive to a letter other than 'C'

Can I scan 110 film negatives on the canoscan 9000f?

I am contemplating buying the canoscan 9000f, but I will need to be able to scan 110mm film format. Can I do this on the canoscan 9000f? I have seen an adapter for that film size on ebay and amazon (oddly enough, cannot find it on Canon), but the price is prohibitive. Can I scan negatives without any holder - in other words, just lay the film directly on the glass platen and scan the negatives in that way?

I found a useful article online called: "How to Scan Odd (Non-Standard) Size Film Negatives on a CanoScan 8800F Scanner -Made Easy".
Here's the URL: http://askjoanne.hubpages.com/hub/How-to-Scan-Odd-Non-Standard-Sized-Negative-on-a-CanoScan-8800F
I have a Canoscan 9000f, and I guess it is similar to the 8800f.
Under the scanner lid, remove the white and black background panel. Center the 110 negative on the glass and close the lid.
When you get into the Canon MP Navigator software, you want to Scan and Import -- Film. Click on the little box that says "Use the scanner driver." Then click on "Open Scanner Driver." That sends you to the ScanGear Advanced Mode settings.
   The first time I did this, I could not understand why many choices were grayed out.
    You have to click on PREVIEW    !!
     When I did this, I got an error message: "The film could not be detected. Please check if the Select Source is correct, or confirm if the film is set correctly and execute preview again. Otherwise, please switch off the thumbnails view mode."
    That last part was the key -- the thumbnails switch is in the upper left corner of the screen. There's a little Slide icon and a little Negative icon. Click on this "switch", and when the Negative icon shows up in color, you are set to go.
    Now, when you click on PREVIEW, your 110 negative should appear. Now just "crop" the 110 negative: move the cursor over one corner of the negative, hold down the left mouse button, move to the diagonally opposite corner, release the mouse button.
    Delete the black box (if there is one) in the upper left of the scan area.
     Now click on SCAN. When it finishes scanning, you can choose to "Retouch and save the image (Close ScanGear dialog)". When you close ScanGear, you will wind up back in the MP Navigator.
    In the Scan Complete box, click on exit.
    Then SAVE your scan under a new name (not IMG).
    Then you can Open the image in a good photo-editing software. I use PhotoShop Elements. There you will need to crop each individual photo on the 110 strip, and save each photo under a different name.
   I think you can use the same technique on other sized negatives.
A good article about negative sizes is: "About Film Formats - Slides, Negatives, & Transparencies" at www.pearsonimaging.com .

AP1242AG WPA and MAC Filtering problem

Hello,
Presently I managed some AP1242AG in ofiice area
I need implement WPA and MAC filtering.
I found what :
In IOS 12.2(13)JA branch IOS and before, MAC authentication was supported
in conjunction with WPA.
In 12.2(15)JA and above, configuring MAC authentication with WPA does not
work. MAC Authentication passes everyone through.
I can't found IOS 12.2(13) in Cisco site.
Can anybody help me and give link to download 12.2(13)JA ?
Thanks.

Also when I acivete MAC filterring
access-list 700 deny   0024.d7ed.2204   0000.0000.0000
access-list 700 deny   0000.0000.0000   ffff.ffff.ffff
dot11 association mac-list 700
dot11 ssid zero!v
   vlan 390
   authentication open eap eap_methods
   authentication network-eap eap_methods
   authentication key-management wpa
   wpa-psk ascii 7 14531708030A2E1A3108212127015644
The WPA is working but MAC filtering not reject
IOS Ver.
Cisco IOS Software, C1240 Software (C1240-K9W7-M), Version 12.3(11)JA1, RELEASE SOFTWARE (fc2)

Boot device ....my cdrom....... Ffile and args: Drive not ready

Hi,
I have a problem: I try to install Solaris10 on a sparc 250 and if I type boot cdrom an err "Drive not ready".
What does this err means?
Thx.

You either have a mechanically or electronically failed disk drive or else your Operating System (I an presuming it is Solaris on that SPARC system) is completely mucked up.
If it is the OS at issue, you will need to install everything fresh.
If it is the 18GB disk drive, you will need to replace it and install everything fresh.
Either way, at some point you will have to go get your OS installation media and install everything fresh. The solution is not that difficult to understand.

I can not update to itunes 10.4, and when I try manually it keeps saying error f drive not available??

I have tried loads of times to update to Itunes 10.4 but it fails every time and tells me to try and download the file manually then install it but this also fails and keeps giving me a error of "F drive not available"
I have itunes on a removable hard drive on my laptop if this makes any difference
Please help
Thanks

Open a Windows Command prompt, e.g. Hit Start > Run, type in CMD and press OK. Type in SUBST F C:\<enter>
This will map F: to C: until the machine is restarted or you enter
SUBST F: /D at the command prompt. Now you can try uninstalling or upgrading the software again. (If upgrading the software, install the software in the default location, not on the F:\ drive.)
tt2

Problem with interface between Photoshop and CanoScan 9000f, mark II

I have just upgraded my Mac to OS X 10.9.1, Photoshop to CC, and purchased the CanoScan 9000F, mark II. I had the CanoScan 8600F previously which came 8+ years ago with Elements 4 but now all this is obsolete with the current software and OS. In Photoshop Elements 4 and the old scanner, I could go to the File menu, select "Import" and find the scanner listed, going then directly to the Canon ScanGear interface to use to scan images. This is not currently happening with the new software and scanner. Under the File menu now I now only see "Images from device..." which takes me to another much less useful interface with the scanner. How can I get Photoshop to again connect directly to the ScanGear interface?

How can I get Photoshop to again connect directly to the ScanGear interface?
AFAIK, you cannot.
The direct connection required the less-than-reliable TWAIN plugin to access the manufacturer's scanner driver which was usually 32 bit only. Photoshop CC is going 64 bit only (it's there already on Macs) so Adobe has removed TWAIN from CC entirely.
http://helpx.adobe.com/photoshop/kb/twain-plug-photoshop-cs4-cs5.html
http://forums.adobe.com/thread/1245120
Additionally, when in use, TWAIN requires exclusive access to Photoshop so you cannot do anything else while scanning is occurring.
Adobe recommends scanning outside Photoshop (using a 3rd party utility such as Vuescan http://www.hamrick.com/). You can then scan (with Vuescan) and use Photoshop simultaneously. Then import the scanned image into PS CC.

CanoScan 9000F scanner won't work on my MacBook Pro even though it should be compatible with the Mac 10.7.2 OS.

My new CanoScan 900F scanner won't work on my MacBook Pro even though I've followed all instructions to make it compatible with the 10.7.2 OS. The USB connection isn't recognised. What else con I do?

I have a similar problem with a new CanoScan 9000F which I tried to use without any success on my desktop computer (Mac Pro 5,1) and laptop (Macbook Pro 1,2) both running OS 10.6. Problem is identical on both, viz:
• Scanning process appears to start, a message comes on the screen: Scanning do not open document cover followed by Scanning...
• This is then replaced by the message: Cannot communicate with scanner. Cable may be disconnected or scanner may be turned off. Check status. Scanner driver will be closed. 2.155.33
I've spent several hours on the phone with Canon support but having uninstalled/installed/reinstalled/updated/turned on/turned off/unplugged/plugged/restarted innumerable times, the problem is exactly the same. The scanner icon shows up in the Printer & Fax System Prefs (though without the little status lights) and shows as being connected in the USB tree. I think it's a problem with the scanner, Canon bods are suggesting the Macs are at fault and suggest I try connecting to a wintel (hawk, spit) and it's 100km to the nearest Canon service centre.
Any suggestions as to what might be the problem/s and what I might be able to do to fix it/them?
Thanks.
By the way, bought the Canon to replace a HP Scanjet 8300 which I've used for 6 years almost without problems. Any that I have had have been fixed merely by turning the scanner off then on after a 10 second rest.

CanoScan 9000F Mark II: HP or Dell what graphics card etc are needed to use the 9000F?

My computer is not up to snuff to handle the 9000F scanner. I am shopping for an HP or Dell unit. What should I look for in the details to be able to select one that is adequate or better. Sometimes a graphics card is indicated and I don't know which can do what though I know the one I have can't do it. What about processors an i5 or i7 intel can do it I think?. What hard drive capacity is required or recommended? I am not a techie but would like to be able to purchase something that will get the job done. I shall be scanning many slides, negs and photos. Thanks

Hi EddS,
The system that the CanoScan 9000F Mark II will be installed on will need to meet the following minimum requirements:
OS Requirements (any OS listed below)
Windows® 8, Windows® 7, Windows Vista®, Windows XP and Mac OS® X v10.6.8 to 10.9
Power Requirements
AC 100-240V, 50/60 Hz
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canoscan 9000f and Mac OS.10.8.2 not compatible. Driver not found on either canon us or uk sites.

Similar Messages

Maybe you are looking for