CanoScan 9000F not seen by PSE 10 but is by PSE 8

PSE 8 has been installed on my I-Mac 27 OS 10.6.8 and working fine.
I upgraded to PSE 10. Both 8 and 10 are on the computer.
I intalled the CanoScan 9000F. It shows up under System / Print/Fax
Acrobat pro sees it with "create pdf from scanner".
PSE 8 sees it with Import
PSE 10 doesn't see the scanner under Import.
Suggestions?

In PSE 9 and 10 you must install the Adobe TWAIN driver to scan. Go to Applications>Adobe Photoshop Elements 10>Support Files>Optional Plug-Ins>ImportModules, and move TWAIN.plugin from there into Applications>Adobe Photoshop Elements 10>Support Files>Plug-Ins>Import Modules.

Similar Messages

Bangla font is not seen appropriately in firefox, but bangla font is seen in safari

In my computer Bangla font is not seen appropriately in firefox, but bangla font is seen in safari. It is also noted that bangla font is available in my computer.

I get a 500 error and the source code (right-click "View source code") show an incomplete HTML code.
I've tried Firefox and wget (a command line tool to retrieve web pages and files). Both lead to 500 server error.
For some reason, Chrome doesn't shows any error, but it seems that there's some configuration in your web server or in Wordpress.

Photo file names not seen in PSE 12 editor while editing

How can I see the file name of a photo while editing in Photoshop Element 12?

Thanks for the answer. However the name shows only when in the Expert mode not the Quick or Guided modes.
I note that in the Expert mode only the relative size of the image on screen is shown as a percent in the lower right corner. That is where I am used to see that in the PSE 9.

Noise adjustments not seen in develop mode, but in library mode

Hi all -
After trying my new copy of LR3, I'm noticing some discrepencies in the library, develop and exported modes. For example, the develop view doesn't show the noise reduction applied to the whole image, but the library mode does - to a degree. The exported image in Photoshop looks somewhere between the library mode and the develp preview. Any reason why? I'd like to get a consistent view which represents the actual changes.

Thank you. However, is there a reason why the libray view shows the applied noise reducton on the whole image preview bu develop does not? While
I do use the 100% box, I'd also like to see how the entire image will look once the noise is applied. Also, for whatever reason the NR looks different in Photoshop somehwere between the library full preview and the develop full preview.
I feel that these sorts of things are far more important than Facebook and Flicker features.

AirPort Express not seen by wifi devices, but router wired devices OK

Hi,
I purchased an AirPort Express yesterday, upgraded the firmware to 7.6.1, connected to my Netgear DG834G router as a wireless client ("Join an existing network"), plugged into stereo and iTunes on my MacPro had no problems using AirPlay.
Today I tried using the AirPort Utility on my iPad and my wife's MacBook (as well as iTunes), but neither of them can see the AX via WiFi. But my MacPro is wired into the router and can see it OK. Likewise if I connect the MacBook to the router it can see the AX fine.
On a more technical note the wired devices can ping the AX, but WiFi devices can't. I find that pretty strange as they're all on the same subnet.
I've tried several resets and reconfigs (even from the MacBook), but once the AX is set to talk to the router then the WiFi devices can't see it. And throughout all this the (wired) MacPro can use AirPlay with no problems.
Has anyone got any ideas on what's going on, I'm a bit stumped! Thanks in advance.
Cheers,
Jay

Problem solved. For some stupid reason I had switched on a setting on the Netgear called "Wireless Isolation", and you can probably guess what that does...
So it's all working now!

Airport extreme not seen by one macbook but not another

I just updated my firmware for my Airport extreme (version 7.4.1) and my macbook pro can see it just fine however my girlfriends macbook can't see it at all. We pick up all the same wi-fi connections except hers doesn't see my airport extreme connection anymore. Prior to the firmware update she could see it just fine but now it doesn't register for her at all. Any help would be appreciated.

use her computer and delete the original wireless set and re-establish the current set.

External hard drive not seen in disk utility but can be seen in system profiler

HI
i have a 500gb western digital my passport, its been working fine, since i have used it on a windows machine, i can no longer get it to be recognised in finder. The light is flashing on the side and i can see it under USB in sytem profiler. I cant see it in disk utility. i cant format as it has photos etc loaded
cheers

An update for anyone who can help me:
I have tried the external hard drive in other computers (mac and windows), each time I get the same problem above.
I have removed the HD from the enclosure and purchased a docking station for it (3.5" SATA). When I plug it in to the laptop it disconnects itself straight away before it is visible. With the windows computers it installs the drivers and says that the device is ready to use, then disconnects before it shows up.
As the HD is not visible there is no option to re-format or anything.
This is very frustrating as I was using the HD with no issues and it randomly disconnected and I have not been able to access since.
Thanks in advance for any help.
Bruce

WD Passport not mounted and not seen in Disk Utility, but something seen in Terminal

Hi,
I have a WD 1TB Passport external hard drive. THe light comes on and the disc spins, but I can't see the hard drive in disk utilitiy or anywhere else. I know that it connects. I saw a post about using terminal to mount using code, but it never found the drive. I opened Console and removed and then plugged in teh drive again and what it says is the following:
kernel:USBMSC identifier (non-unique): 0F06CB9C0F06CCCA 0x1058 0x0 0x1015, 3
I have no idea what this means. Please help me try to find my external drive again.
Thank you.

If you have another non WD enclosuer, swap into that one and see if it is now detected in Disk Utility.
Contact WD technical support for assistance.
Ciao.

Canoscan 9000F One-Touch Buttons: What 'Registered Software Application' Do I Need?

I have a Canoscan 9000F Mark II. I'm trying to get the scanner buttons to work with it -- particularly the COPY button. I've installed all available Canon software for Windows 7 (x64) for this scanner. When I hit the COPY button, I get this dialog box:
So I went into the Scanner Properties for the scanner and found this Events tab. But for every scanner button including COPY, it says "No application is registered for this event." It won't let me select anything other than Take No Action. The other choices are grayed out:
If I go to the original Canoscan 9000F (NOT the Mark II version) drivers and software page, I see this software called MP Navigator EX. I installed that just for the heck of it, since none of the Mark II apps seemed to want to register as a "registered app" for this function.
When I did that, it actually put that as a choice (the only choice) by Start This Program:
I thought that would do the trick, but then when I hit the COPY button, I get this dialog box:
So I figure that MP Navigator EX is missing from the Mark II download page for a reason -- it's for the original 9000F and is not compatible with the Mark II.
OK...so...what IS compatible?
What app do I need to "register" for this buttons in order for them to work?
I'm completely stumped. Someone please help; I'd greatly appreciate it.
-Thanks

So, I went through Canon Support. The rep not only had no idea how to fix the problem -- he first tried to deny that the problem existed at all, using phrases such as, "it SHOULDN'T need any other app in order to work," "you SHOULDN'T be getting that message from the Canon software," "it SHOULD work as long as you have the Canon Toolkit installed." Uh huh. Except that I obviously do, I am, and it doesn't.
He was also completely unaware that there are TONS of forum messages and other posts on the Internet about the same or similar problem. Tons of them. A Google search came up with 193,000 results. The rep said that this is the first time he'd heard of anything like this. Which means he's either lying or blatantly ignorant.
After about 45 minutes of repeating myself, and then finally pointing him to the pretty screenshots on this thread here (which he first, when I offered to give him the link, quickly dismissed as, "that won't be necessary,"), he finally decided that the problem was going to have to be escalated to the engineers.
That was a week ago. Most likely my request just went into the round file and was quickly forgotten. I'll be VERY surprised if I hear back again on it. Suspect I'll have to call again, get another rep, and go through the same stupid routine all over again.
Nice job, Canon. How about checking your forums once in a while? Do a Google search on this problem, for crying out loud. It's NOT an isolated case, by any means. It NEEDS to be fixed, and PRONTO!
Ridiculous.

Import in PSE 13 using CanoScan 9000F under Windows 7 64 Bit

I have installed the new PSE 13 on my Windows 7 64 Bit PC. I use a scanner CanoScan 9000F, the most actual driver is installed (ScanGear).
But the scanner doesn't appear in the list when selecting "Import" in PSE.
My last (also still installed) PSE Version was 10. Here the CanoScan 9000F appears in the selection. For this Version I copied Twain_32.8BA from directory Adobe\Photoshop Elements 10\Optional Plug-Ins\Import-Export into Adobe\PhotoShop Elements 10\Plug-Ins\Import-Export directory.
But in PSE 13, no such file exists. Copying the Version from PSE 10 does not work.
Is it right, that Twain Drivers are no longer supported?
Thanks for any help
digiwal1

Yep. I agree with the above comments. Other users have reported issues while working with outlook 64 bit. Here is one such discussion http://forums.adobe.com/message/3289324 .
Thanks

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

I want to cut and paste iCal entries on iPad. Have seen a number of questions raised but no definitive answer - is it possible or not? (I use Bento but that doesn't sync with ICal now so can use that solution)

I want to cut and paste iCal entries on iPad. Have seen a number of questions raised but no definitive answer - is it possible or not?
(I use Bento but that doesn't sync with ICal now so can use that solution)
Hope to hear helpful news soon....
C

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

I like and use Top Sites but it has become unsuable with this constant blacking out and reloading the thumbnails. My MBP has not seen a problem at all. I have been searching every other day for over a month trying to find a fix in Windows Safari with n

I like and use Top Sites but it has become unsuable with this constant blacking out and reloading the thumbnails. My MBP has not seen a problem at all.
I have been searching every other day for over a month trying to find a fix in Windows Safari with no joy. I want to resolve, not switch browsers. Please offer up a solution that only refreshes the Top Site thumbnails once a day or as some controlable interval. Started about two versions ago, now on ver 5.1.5. Windows 7 64bit.
Safari 5.1.5 for Win64 bit, Windows 7!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
the funny behaviour of the trackpad/cursor still persists. any suggestion???
thanks again

Cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike

My iphone4 is not seen on itunes. When I plug the iphone the device does not recognize it but the pc recognizes it as a camera or something. What can I do?

My Iphone is not seen on itunes when I plug it. I've tried everything that I found on the internet. but it still doesn't work, so I can't sync my iphone. What can I do? I have checked all the USB ports, I have desinstalled and installed again itunes, and I have run out of ideas.

When you plug it it, it should recognize it as an Apple IPHONE under devices. It will then bring the Camera/Connection wizard for the photos on the device. When you plug into different USB, it should bring the hardware wizard and tell you what its installing, what happens?
Under Device Manager, under Imaging Devices it will show up as Apple IPHONE. Is this being shown in your computer?

CanoScan 9000F not seen by PSE 10 but is by PSE 8

Similar Messages

Maybe you are looking for