Canoscan lide 110 scanner

I cannot seem to find a way to set up an email address so I can scan and send documents.  I have tried everything I can fine in the manual.  Can anyone help?

Hello Lfailla,
You can set a few settings for email in the MP Navigator software the unit came bundled with.  Please note not all email programs are supported.  You can always scan to your desktop and attach it to an email.  However, feel free to visit the link below to let us know your computer's operating system, and which email provider you use, and we can look into if  you have any scanning to email options.  Thanks! 
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • How do you get canoscan lide 110 scanner to display in "file import" menu?

    I have several older versions of Photoshop Elements running on various computers.  In ALL of them, if you go to "File>Import" you see "Canoscan LIDE xx".  when you choose it, there is a great scanning application that runs. On a newer computer, i had Photoshop CS5.5 installed.  It only shows WIA under the import menu.  The scanning software there is horrible.  I tried installing the same scanner (lide 110) on an older computer running older photoshop elements and it showed up.  i then installed a older version of the elements software on the new computer.  Again, the scanner showed up.  Not wanting to break licensing agreements, i just downloaded a brand new version of photoshop elements 12 and installed it.  it only shows WIA in the file/import menu and not the scanner. therefore, i dont have the scanning software/application i need.  without it, this version of elements is 100% useless to me.  can someone please help me get my scanner to appear in the "file>import" menu?  Yes, i do have the latest version of software downloaded from canon's website.

    Hi,
    I believe that this is where PC & MAC versions differ.
    The PC version  will "get from scanner" in the organizer but the MAC version has to "Import from scanner" in the editor. I don't know why they act differently.
    It has been posted on this forum (can't find thread at the moment) a fix for the windows version of copying a module from a previous version if you had one. That is not an official fix.
    If I find the link I'll post back.
    Brian

  • CanonScan LiDE 110 Scanner problem

    I have just recently purchased a new CanoScan LiDE 110 scanner. I am  using it with my new iMac computer (2013 model, 10.9 Mavericks O.S. I like to use the sleep mode on my iMac. When I awaken my computer from the sleep mode,  the scanner is reluctant to reconnect and work. In order to use the scanner I  have to reboot my computer to get power to the scanner. Is this a common problem with this scanner? How do I solve it. Once powered the scanner works beautifully. Having to reboot every time I use the scanner is very bothersome.  On my old iMac (2007 model) I had an older canon scanner.  It worked just fine coming out of the sleep mode. Always turned on the way it should.
    Hopefully, someone has some insight into this situation.
    Bob Mc Farland

    Thank you for your support.
    I already re-installed the software but it's still have the same problem. I got the software from canon website.
    http://support-asia.canon-asia.com/P/search?model=CanoScan+LiDE+110&menu=download&filter=0&tagname=g...
    Is that the latest software?
    fyi, i try this software in my laptop with window 7 starter and it's work..Does my pc have problem?

  • I have just downloaded OSX Mountain Lion. I have Canoscan LiDE 110. I am continuously getting an error message, "MP Navigator EX quit unexpectedly. Application Specific Information: *** Terminating app due to uncaught exception 'NSInvalidArgumentException

    I have just downloaded OSX Mountain Lion 10.8.3 and installed it on my lap top. I have Canoscan LiDE 110. I am continuously getting an error message, "MP Navigator EX quit unexpectedly when ever I try to scan a document. Application Specific Information: *** Terminating app due to uncaught exception 'NS Invalid Argument Exception..."
    Please let me know how to solve this problem.

    LexSchellings wrote:
    According to www.roaringapps.com the MP Navigator EX does not run on Mountain Lion.
    There are different versions of MP Navigator available depending on the Canon device you have. And there are version of this app that do work on 10.8. So www.roaringapps.com would need to amend their statement.
    LexSchellings wrote:
    Instead I use Canon Solution Menu EX, which does even more for you than the MP Navigator. This Solution Menu runs perfectly on Mountain Lion.
    Solution Menu is just a front-end for other Canon applications. When you click on the Use Scanner menu and select Auto Scan, OCR or Attach To E-mail, MP Navigator will open.
    As for the OP, they can obtain the latest version of MP Navigator, which is 10.8 compatible, and the supporting scanner driver via this link.
    http://support-au.canon.com.au/P/search?model=CanoScan+LiDE+110&menu=download&fi lter=0&tagname=g_os&g_os=Mac%20OS%20X%20v10%2E8
    And you don't need to uninstall an older version. The new version will overwrite.

  • Upgraded to OS X 10.9 and now cannot connect to Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

    I have upgraded to OS X 10.9 and now I cannot connect to my Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

    Like Dan White, I have found that I can still run the Lide 90 under Mavericks. As Dan says, the buttons on the front of the scanner don't work but I rarely if ever used them.
    I have just tested the scanner using Acrobat Pro and it loads up the Scangear software to capture the scan, with no problems at all. I didn't have to reinstall anything as it was all there already and working in Mountain Lion. Photoshop CS 5.1 is different; it does not recognise the scanner, presumably because it can't find a TWAIN driver for it. Image Capture does not recognise the scanner either, but I don't have the latest (10.8) Canon MP Explorer and Explorer Opener software installed.

  • Re: Trouble with peripherals (CanoScan LIDE 30 Scanner & HP LaserJet 1020)

    The Canon CanoScan LIDE 30 scanner didn't have any autodetection, so I want to the Canon Web site to look for drivers. I grabbed the drivers, packaged in a .dmg file, from Canon. Running the setup file, I was a bit perplexed what it wanted me to do, so I installed the drivers in the Applications directory and rebooted the system when prompted.
    That did nothing - I still couldn't access the scanner. I tried a couple other places - root of the hard drive, /Library/Image Capture... nothing.
    I'm at a complete loss here, and couldn't figure out how to do it.
    And the printer.
    I hooked up the HP LaserJet 1020 to the Mac. Nothing happened, so I went into the Print & Fax System Utility to set it up. The printer browser was able to detect it, but there was no listing for the HP LaserJet 101 in the driver selections. Hewlett Packard doesn't offer Mac drivers for the printer.
    Anything I can do to get these two peripherals working?
    Feel free to CC responses to [email protected]

    The Canon CanoScan LIDE 30 scanner usually installs a file "N124u-buttonmanager" in your Login items (actually the standard install used to put the "buttonmanager" for both the LiDE 20 and LiDE 30 scanners, see this User Tip: kmosx2: Looking for devices matching vendor..).
    Their more recent software is better behaved: I have an all in one, and there are no Login items, everything is installed in a "Canon Utilities" folder inside "/Applications".
    So, if the software you downloaded includes a "buttonmanager", make sure you choose the right one (see the User Tip) and put it in your login items (System Preferences > Accounts).

  • CanoScan LiDE 700F Scanner not opening up

    Whenever I try to scan anything with CanoScan LiDE 700F scanner my computer gives the message "scanner reported an error. An error ocurred while communicating with the scanner." I have to unplug and plug back the USB port and only hten it opens up.  When I try to open the scanner with System Preferences, scanner opens up, but as soon as I hit "scan" the same error message pops up.  I uploaded the latest driver from Canon website, but the problem persists.  I also deleted and re-installed the sanner in system preferences, but it didn't help.
    It used to work fine when I initially installed it (on Leopard), but then suddenly this problem arose.

    This same error message was first noticed on 10.6. It would only occur after waking the Mac from sleep. Prior to the sleep state you could scan using Image Capture without error. But if the Mac entered a sleep state with the scanner connected, after waking it and then trying to scan, the error message would appear. And as you have found, the quick solution is to unplug the USB cable and then reconnect it.
    This problem only occurs with Canon scanners that use USB power. The models that have their own power supply, or the All In One devices with scanner, do not suffer the same fate. Apple Engineering is aware of this and have told me that it is up to Canon to fix.
    Note that the same problem does not occur when using Canon's MP Navigator application. This application uses the full TWAIN-based scanner driver, whereas Image Capture and Preview use the ICA driver, and works fine after waking the Mac from a sleep state.

  • CanoScan LiDE 60 scanner driver problems

    I'm usually pretty good at troubleshooting software issues on my iMac, but this scanner problem has me absolutely stumped!!! My old Canon CanoScan LiDE 60 scanner stopped working the other day...out of the blue. I have been using the ScanGear software without a hitch, and now every time I open the program, I get a "Failed To Open Driver" message. I figured out that I obviously needed to upgrade my software and drivers. I did some research online and was told I needed to install the new CanoScan software and driver from the Canon website. This scanner model is technically not supported by Snow Leopard, but some people got it to work!! Well...I tried that, followed all instructions correctly, then restarted my Imac and replugged my scanner USB cord. I opened the ScanGear software again, but I still have the missing driver message!! I've been trying several little tricks to get it work, but still nothing. I'm at the point where I need to start from scratch and uninstall everything related to the scanner, but I'm not sure how to do that correctly either, removing all the orphaned data! Can someone please give me a step-by-step process what I need to do?

    Guys, thanks for this. I've had similar problems but with your help and others solved both issues for the Toolbox and Driver (OS X10.6.8):
    Make sure all previous drivers downloads etc are deleted, inc the DMG files etc and disconnect the scanner.
    You can then download the latest Toolbox from the UK site [dated Feb 2011] (it doesn't require you to reboot, for some strange reason??). Then download the latest driver from the Australian site. You have to reboot then.
    Everything seems to work fine. No preview as before unfrotunately but goes a treat. Hope that helps guys.

  • Upgrade from Mac OSX 10.4 to 10.5 + Canoscan Lide 30 Scanner + X11

    I have just changed from PC to Mac (iBook G4). The iBook is already set up and workiing properly. Some questions for an inexperienced Mac user:
    1. Is it worthwhile changing to OSX 10.5? Will the personal setting be automatically updated or will it led to the inevitable Microsoft crashes?
    2. have downloaded drivers (*.dmg) for canoscan lide 30 and tried to install it. The scanner does not work. Which programmes do I need?
    3. How/where do I get the latest version of the X11 software for OpenOffice? The downloads from the internet cannot be installed because of the new versions of OSX 10.4.
    Thanks in advance for the help.
    Kindest reagrds

    1. Which iBook model do you have? You need a minimum of 867 mhz, 512MB of memory,
    DVD drive for installation and 9GB of available disk space. Doing an upgrade should preserve your user settings. Is it worthwhile? Only you can answer that. Frankly I would stay with Tiger 10.4.11 with your machine.
    2. You may need to take that up with Canon.
    3.Note 10.4 customers can install X11 by using the Tiger DVD installer disk. See here:
    http://overstimulate.com/articles/installing-x11-on-os-x-10-4-tiger

  • Will a CanoScan LIDE 210 scanner work with OSX 10.11 beta?

    I am testing OSX 10.11 Beta release and happen to need a scanner.  I am asking to find out if the CanoScan Lide 210 will work with this version of OSX?

    Any luck? I upgraded to OSX 10.11 and sometimes it works sometimes it doesnt.

  • I have a CanoScan Lide 700F scanner ,how do I scan Black and white neg.and turn them into positives?

    I am scaning all old pictures, docts,  slides ,but I have alot of b&w negs verious sizes, how can I turn  them into b&w positives??

    Hi Teddy.
    The MP Navigator EX software that was bundled with your CanoScan LiDE 700F can be used to scan your black and white negatives.  To use the MP Navigator, please follow these steps:
     1.  Start MP Navigator EX and open the Navigation Mode screen.
     2.  Point to Scan/Import and click Film.
     3.  Place the film on the Platen.
     4.  Click Specify... to set the document size and scanning resolution as required.
     5.  When setting is completed, click OK.
    Important
    Film may not be scanned correctly when Film Type in the Scan Settings dialog box is set to Auto. In that case, select the type of film in Film Type and scan again.
    Note
    To scan black and white film, it is recommended that you select Black and White Negative Film or Black and White Positive Film for Film Type in the Scan Settings dialog box.
     6.  Click Scan.  Preview scan starts.  When preview scan of the film is completed, the preview image appears.
    Important
    If a message for calibration appears, remove the film, then place the Film Adapter Unit over the first frame of the Film Guide and click OK.
     7.  When the calibration is completed, follow the on-screen instructions to load the film into the Film Guide, then click OK.
    Note
    Preview image does not appear when the Preview before scanning checkbox is not selected in the Scan Settings dialog box. The scanned images appear directly in the Thumbnail window.
     8.  Select the checkbox of the frame and click Scan.  When scanning is completed, the Scan Complete dialog box opens.
     9.  Select Scan or Exit. To scan another frame, place the Film Adapter Unit over the frame you want to scan, then select Scan. Select Exit to end.
    The scanned images appear in the Thumbnail window.
    10.  Edit the scanned images as required.  Use Edit Tools to rotate images, select a part of an image, etc.
    Note
    First select images to edit. (Selected images are outlined in orange.) Drag the mouse or use Shift + arrow keys to select multiple images.
    11.  Save the scanned images.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • CanoScan LiDE 110: error msg: "Canon MP Navigator EX has stopped working..."

    I have tried all the trouble shooting tips from the manual that I am able to understand how to do. Nothing seems to work. 
    Windows 7, 64 bit.  Brand new scanner, out of the box. 

    Hello Isecretan,
    The error you are experiencing may be related to the user account you are currently using.  Please try using the MP Navigator in a different user account or create a new account for testing purposes.  Perform the following to create a new administrative account:
     1.  Click Start and open the Control Panel.
     2.  Under User Accounts, select 'Add or Remove User accounts'.
     3.  In the Manage Accounts window, select 'Create a new account' at the bottom.
     4.  Create a name for the account, then select 'Administrator' and click 'Create Account' at the bottom.
     5.  The new account should be visible in the Manage Accounts screen.
    Once this process is complete, close all windows or programs.  Then log out of the current account using the Log Out option from the start menu, then log in to the new account.  Once logged in, attempt to scan from the MP Navigator on the new account.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • CanoScan LiDE 220 error Cannot communicate with scanner Error 2, 156,182

    A month ago I bought a scanner the "Canon CanoScan LiDE 220" .
    I get this scanner after a month of testing not stable / operational.
    I keep getting the following error message :
    and also the error 2, 156, 182
    Configuration:
    A. Mobo ASUS X99-A > with the latest Bios Level
    B. Windows 7 64-Bit
    C. When connected to a USB 2.0 or 3.0 does not matter.
    D. Scan Driver is the
    http://www.canon.nl/support/consumer_products/products/scanners/lide_series/canoscan_lide_220.aspx
    CanoScan LiDE 220 Scanner Driver v. 1.01 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP)
    File version: 1:01
    Release date: April 24, 2015
    E. Quick Menu v 2.5.0 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP) File version: . 2.5.0 " is used.
    Please help me, It's very frustrating when you buy new stuff and it all turns out not to work.
    Regards,
    Rob Blankestijn

    I am also getting a similar error, except mine is "Code:2,156,182"
    If anyone is also getting these errors or if someone on Canon tech support could rectify this, I would really appreciate it. 

  • Canon LiDE 110 error code: 5,202,52

    i just got my brand new LiDE 110 scanner, and i installed the driver and everything was fine except for the error code 5,202,52 keeps showing up. i tried everything i could do, including reinstalling the driver over and over, however, it doesn't work.
    my laptop is win7 64-bit home premium. im getting crazy, any one help?

    Hi jakehues,
    The 5,155,75 error is a generic communications error and unforutnately does not pinpoint the cause.  Please make sure that the USB cable that you are using is 6 feet long or shorter.  Also, please make sure that the USB cable is connected directly from the CanoScan LiDE 110 to your computer and is not connected to a USB hub or some other device.  Please disconnect all other USB devices connected to the computer and then attempt to scan.  Are you able to scan?
    If not, please try temporarily disabling security software and then attempt to scan, as firewalls and anit virus have been known to cause these type of errors as well.
    If you continue to have difficulties, please contact our support group using the following link:
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Is CanoScan LiDE 220 compatible with Photoshop Elements 6 & 8

    I purchased a CanoScan LiDE 220 scanner. My Adobe Photoshop Elements 6 & 8 do not recognize CanoScan LiDE 220,
    When I go to  File and import CanoScan LiDE 220 does not appear.
    Is CanoScan LiDE 220 compatible with Photoshop Elements 6 & 8
    Thankyou
    Ken

    Looks like it exceeds PSE 12 System Requirements.
    http://www.adobe.com/products/photoshop-elements/tech-specs.html

Maybe you are looking for