CanoScan Lide 210 Help

Hi,
Just purchased the 210 to go with my new iMac 10.9 OS and are having problems. I don't have a CD drive. 
I downloaded from the Canon website the following,
ICA Driver Ver.3.1.0
LIDE 210 Scanner Driver Ver. 17.7.1a
Software : MP Navigator / Quick Menu / Solution Menu
Documents scan okay but nothing happens - can't print / e-mail / PDF etc.
I've obviosly mucked something up and not being tech savvy I would appreciate someone pointing me in the right direction.

Thank you, Paul, for looking into my issue. The canon support person did have me to install the latest ICA driver from their site and it didn't help the problem. I really like the canoscan lide 210, even using it in mp navigator. I would love to be able to use it from image capture & preview and print & scan...without having to either restart the computer or unplug the usb cable, or as I mentioned, using the scanner in navigator first, and then switching over to the other applications, it works fine. For me, the issue is the scanner is D.O.A. after coming out of sleep. I removed the twain driver to see if the image capture would work on the ICA driver. No good. I truly believe that this scanner will just not "wake from sleep" in the aforementioned applications. I asked another Canon tech guy if I got a "powered" scanner would it work after sleep on my iMAC lion 10.7.3. He just didn't know. My hp printer works fine, after sleep, from its usb port, using the hp driver. My scanner works fine, after sleep, using the mp navigator driver, on the usb port. My problem is the ica driver won't work on the usb port for my scanner, after sleep.
Thank you again, for looking into this issue. Hopefully, you will have a good suggestion, even if it means purchasing an epson scanner, which is AC powered.
Ronnie

Similar Messages

  • Will a CanoScan LIDE 210 scanner work with OSX 10.11 beta?

    I am testing OSX 10.11 Beta release and happen to need a scanner.  I am asking to find out if the CanoScan Lide 210 will work with this version of OSX?

    Any luck? I upgraded to OSX 10.11 and sometimes it works sometimes it doesnt.

  • Canoscan LiDE 210 won't work on my macbook pro

    Can't get my scanner to work on my macbood pro, OSX 10.8.4.  I've downloaded the driver for the scanner and the MP Navigator EX 5.02.  MPNav won't even open.  LIsts only a few Canon products supported.  EXTREMELY frustrating.

    I should have clarified I was referenceing the software as Canoscan LiDE 5.0.1.4 for Mac OS X. It appears to be the most current version.
    The scanner is a Canon model CanoScan LiDE 600F. After posting, I found and installed the current scanner driver. Same results with a subsequent scan attempts. The preview displays the full picture, but finished horz. image is clipped at the top and shows part of the sprocket holes at the bottom of the frame.
    But after teasing the piece of film into the most extream position against the bottom edge of the holder with a toothpick I was able to trial and error some full frame images with minimal clipping. I suspect it is a software problem. Probably some focusing or alignment algorythm
    The film adapter is a 13"X4" device that lays on the larger glass, a cable plugs into a port labled FAU and the device engages two magnetic latches to exactly position the film adapter. The adapter itself has a hinged lid and seems to be disigned for a 35 mm strip of film, not an idividual cut frame. The larger scanner lid is double hindged, so it can close over the film adapter when its mounted on scanner bed.

  • Update Re: Using Canon LiDE 210 with OS X 1.6.8

    Hello,
    I've read some older threads regarding this discussion but they must be closed since I couldn't add a comment.  So, I thought it would be best to open a new one.  I apologize if I'm treading old ground.
    Here's my setup:  MacBook Pro (mid-2010), Mac OS X v10.6.8 Snow Leopard, Safari 5.1.2.  I needed a basic scanner, did research and everything looked good, so I bought a Canon CanoScan LiDE 210 scanner.  All I need is to be able to scan documents (minimal graphics) to the MacBook, preferably in PDF format.  Not really interested in scanning photos etc.
    I just want to be careful and would like some clarification, please.  So regarding installation, I've gotten three "recommendations/methods":
    1) With the purchased Scanner, included was installation CD with instructions.
    2) Emailed Canon Support and was told to download the latest driver and the MP Navigator EX from their website instead.
    3) Read and referenced Apple Support Article HT3669 , which has been updated recently - February 15th, 2012.
    Now, step #3 is my preferred selection, since it comes from Apple Software Update and the article lists the LiDE 210 as supported.
    I also noticed on the other thread (that I could not comment on), that PAHU commented:
    I have the LiDE200 and it works fine with Image Capture and Preview. The driver was included with one of the Canon updates hosted via Apple and part of Software Update. Checking the [latest Canon update|http://support.apple.com/kb/HT3669#canon] hosted by Apple, the LiDE210 and LiDE700F are both included as supported scanners.
    This sounds exactly what I want to do for installation and use (Image Capture and Preview).
    So before mucking up anything, if possible, could someone please confirm the step #3 approach and the supporting comments. (PAHU ?!  ).
    The way it appears, step #3 seems like minimal hassle, straightforward, and the best way to go.  Also, do I really need this "MP Navigator EX", if I have Image Capture and Preview?  I would prefer to avoid as much third party SW as possible.
    I apologize for the lengthy post and thanks in advance for the help!
    DMerz

    Nice to read that it is all working. In response to the questions;
    DMerz wrote:
    I would love to have Adobe Acrobat Pro but funds won't allow it.  You mentioned TWAIN based (Adobe Acrobat Pro) and making PDF's.  What is the difference in creating a scanned PDF file via Image Capture vs creating one with Adobe Acrobat Pro?  Or another way to ask is, what does the TWAIN driver do that the ICA doesn't?  I googled TWAIN but got lost pretty quick.  Sorry if that is a dumb question... 
    A PDF created by Image Capture is not a text searchable PDF. It is basically an image file (it is usually a TIFF with a Postscript header). So if you wanted to locate some line of text on the page, you would not have the ability to do so. In contrast, a PDF created in Acrobat will be text searchable, as the software will do character recognition (aka OCR). So if you wanted the means to locate content within each document, then you should OCR the scanned document. An Acrobat Pro will do this on the fly as you scan the document. Using Image Capture, you would have to scan the document first and then use some OCR package to convert the scanned image.
    For the record, MP Navigator has an OCR function, but it is not as accurate as Acrobat Pro's version.
    DMerz wrote:
     One last question (I think - ).  I'm still running Snow Leopard OS X v10.6.8. but probably will go to Lion soon.  It looks like the Apple Support Doc says that the ICA driver I got through SW update will work with Lion OS X v10.7, so will the driver "disappear" when I do the Lion upgrade, causing me to have to setup the scanner again?
    The driver won't disappear if you upgrade. The ICA driver package available from Apple is for 10.6 and 10.7. But it is sometimes advisable to remove the printers and scanner in 10.6 before you upgrade, or at least ensure you have the latest versions available before the 10.7 update. Given that you have just done this installation then you have the latest drivers so there should be no issue with the scanner after the Lion update.

  • Problems with using Canon LiDE 210 and OSX 10.7.4

    I am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP. Has anyone else had a similar problem or can anyone suggest a fix? Many thanks

    Hellooo, I realise this thread is a year old and yet I'm having some real difficulty, hopefully this will fall on someones ears...
    Firstly I have a mac mini bought recently and running on Mountain Lion 10.8.3 I tried downloading what is apparently the most up to date drvier and mp navigator for use with the CanoScan LiDE 210 meaning, that both the driver and mp navigator are compatible with Mountain Lion. Here is the following link I used that was forwarded to me by Canon:
    http://support-asia.canon-asia.com/contents/ASIA/EN/0100434402.html
    http://support-asia.canon-asia.com/contents/ASIA/EN/0200153502.html
    I install both of the downloads, plug in the scanner, and nothing... no noise, no beep nothing to say that it is on. I try and open the scanner through system preferences-printer/scanner-canoscan icon yet I am then presented with the message; "failed to open a session on this device"
    Strange, I call canon back and they do not know what else to suggest apart from all the usual trouble shooting, the type that is very patronising and annoying... did you click the icon and press scan, did you click the install button after downloading the software... the sort of thing that might otherwise result in the beating, of ones own face with the phone
    At the end of this call, and after forwarding me a couple more useless links to unworkable downloads they say that it must be the product, and that I should contact the seller for a replacement.
    So I do, I contact Amazon, I get my replacement and voila, exactly the same problem.
    I even try getting it going using my mbp which is on snow leopard, which means I can use the installation disc that it is packed with it, it makes a noise, it sounds like its turning on but then when I click "open scanner" ... nothing, no option to scan, no acknowledgement of the device other than the icon itself in system preferences.
    Does anyone have any experience of this issue, does anyone know how I might resolve it?
    Many thanks,
    Jeff

  • My Canoscan Lide 35 has been unresponsive since I have updated mac software to 10.9.1 Mavericks. Help please!

    My Canoscan Lide 35 has been unresponsive since I have updated mac software to 10.9.1 Mavericks. I have reinstalled the correct drivers from the canon support page, this didn't work. I have just installed MP Navigator from the canon website as suggested by Apple and try to open it and get the message "The scanner driver supported by this software is not installed. Install it and retry", even though I've just installed it! Any help or suggestions would be much appreciated.

    Hey, Clinton,
         Thanks for your help!  I was able to go to iMovie 9.0.9 and import video.  I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support.  They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded.  That didn't change anything.  In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge.  But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2. 
         1.  Open iMovie 9 (finder/applications/iMovie 9.0.9
         2.  Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
         3.  Close iMovie 9
         4.  Open iMovie 10 (probably in the dock)
         5.  File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events.  Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.) 
         6.  Select the clips and import.  Click the blue "Import Selected" button on the bottom right.
    You may get a message that some files cannot be imported.  Click continue import.  It's a little glitchy.  It imports your clip, and also makes a copy of it, too.  On the copy, the audio is normal, but the video is choppy.  In any case, you would delete the copy, anyway.
    Hope this additional information helps somebody else.  Thanks again, Clinton for helping me!

  • How do you get canoscan lide 110 scanner to display in "file import" menu?

    I have several older versions of Photoshop Elements running on various computers.  In ALL of them, if you go to "File>Import" you see "Canoscan LIDE xx".  when you choose it, there is a great scanning application that runs. On a newer computer, i had Photoshop CS5.5 installed.  It only shows WIA under the import menu.  The scanning software there is horrible.  I tried installing the same scanner (lide 110) on an older computer running older photoshop elements and it showed up.  i then installed a older version of the elements software on the new computer.  Again, the scanner showed up.  Not wanting to break licensing agreements, i just downloaded a brand new version of photoshop elements 12 and installed it.  it only shows WIA in the file/import menu and not the scanner. therefore, i dont have the scanning software/application i need.  without it, this version of elements is 100% useless to me.  can someone please help me get my scanner to appear in the "file>import" menu?  Yes, i do have the latest version of software downloaded from canon's website.

    Hi,
    I believe that this is where PC & MAC versions differ.
    The PC version  will "get from scanner" in the organizer but the MAC version has to "Import from scanner" in the editor. I don't know why they act differently.
    It has been posted on this forum (can't find thread at the moment) a fix for the windows version of copying a module from a previous version if you had one. That is not an official fix.
    If I find the link I'll post back.
    Brian

  • Image capture won't recognize Canoscan lide 700f

    Hello.  I have OS X, v. 10.6.7   I have been using Image Capture to run the Canoscan lide 700f scanner.  Then, it stopped recognizing the scanner.   Image capture is opened and says "no camera or scanner attached."  The scanner is operational.  The MAC sees the printer in systems preferences > hardware > print and fax. Any ideas on what I can do to get this scanner recognized by Image Capture again?  Thanks for your help.

    I had the problem with the same scanner and Lion.  When the Mac would go to sleep, Image Capture would not recognize the scanner after it woke up.  Had to unplug and replug the USB connector to get it to start correctly.  I was blaming it on the scanner driver, but I accidently discovered that if I opened Adobe Photoshop Elements 6, all of a sudden the scanner would respond to an attempt to import from the scanner (to Elements).  After that, Image Capture could talk to it just fine.  So it appears that it is an Image Capture problem and not an issue with the Cannon driver.

  • CanoScan LiDE 200 - can't get it to work with 10.6.6

    I have a CanoScan LIDE 200 and recently upgraded to 10.6.6, and now I cannot get the scanner to work. I spent 3 hours downloading all the latest drivers and even the Canon IJ Network Scanner Selector. Everything I tried failed and now I'm losing patience. I've never had a problem like this before, downloading the latest driver usually does the trick. Help, please!?

    Are you able to add the scanner in Print & Fax? If the scanner does not appear in the Default view when connected to the Mac then the USB cable could be a cause. You can open System Profiler and select USB in the Hardware column on the left. Then in the right pane the LiDE 200 should be listed under one of the USB busses. If the scanner is not showing then try moving it to another USB port on the Mac. If it still fails to show then try another USB cable.

  • Can't run the Installation Software for the LiDe 210, need a signed/verified copy???

    Can't run the Installation Software for the LiDe 210, need a signed/verified copy???

    Hi lanepoor!
    So that the Community can help you better, we will need to know the Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other details you'd like to give will only help the Community better understand your issue! Thanks and have a great day!

  • CanoScan LiDE 220 error Cannot communicate with scanner Error 2, 156,182

    A month ago I bought a scanner the "Canon CanoScan LiDE 220" .
    I get this scanner after a month of testing not stable / operational.
    I keep getting the following error message :
    and also the error 2, 156, 182
    Configuration:
    A. Mobo ASUS X99-A > with the latest Bios Level
    B. Windows 7 64-Bit
    C. When connected to a USB 2.0 or 3.0 does not matter.
    D. Scan Driver is the
    http://www.canon.nl/support/consumer_products/products/scanners/lide_series/canoscan_lide_220.aspx
    CanoScan LiDE 220 Scanner Driver v. 1.01 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP)
    File version: 1:01
    Release date: April 24, 2015
    E. Quick Menu v 2.5.0 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP) File version: . 2.5.0 " is used.
    Please help me, It's very frustrating when you buy new stuff and it all turns out not to work.
    Regards,
    Rob Blankestijn

    I am also getting a similar error, except mine is "Code:2,156,182"
    If anyone is also getting these errors or if someone on Canon tech support could rectify this, I would really appreciate it. 

  • Mtn Lion won't see CanoScan LiDE 90

    10.8.2 won't see my CanoScan LiDE 90 scanner, which worked just fine via Preview until very recently (must be a recent sw update caused this?)  I've installed new driver from Canon, but system doesn't recognize it's there -- not even in Apps.  Any ideas?  Thanks.

    You might try the page below. You can ask Canon for help:
    http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan _lide90#ServiceAndSupport

  • Upgrade from Mac OSX 10.4 to 10.5 + Canoscan Lide 30 Scanner + X11

    I have just changed from PC to Mac (iBook G4). The iBook is already set up and workiing properly. Some questions for an inexperienced Mac user:
    1. Is it worthwhile changing to OSX 10.5? Will the personal setting be automatically updated or will it led to the inevitable Microsoft crashes?
    2. have downloaded drivers (*.dmg) for canoscan lide 30 and tried to install it. The scanner does not work. Which programmes do I need?
    3. How/where do I get the latest version of the X11 software for OpenOffice? The downloads from the internet cannot be installed because of the new versions of OSX 10.4.
    Thanks in advance for the help.
    Kindest reagrds

    1. Which iBook model do you have? You need a minimum of 867 mhz, 512MB of memory,
    DVD drive for installation and 9GB of available disk space. Doing an upgrade should preserve your user settings. Is it worthwhile? Only you can answer that. Frankly I would stay with Tiger 10.4.11 with your machine.
    2. You may need to take that up with Canon.
    3.Note 10.4 customers can install X11 by using the Tiger DVD installer disk. See here:
    http://overstimulate.com/articles/installing-x11-on-os-x-10-4-tiger

  • Canon Scanner LIDE 210

    I have been using a Canon  LIDE 210 scanner with no trouble for some time.  Now sometimes the scanner light does not light up and I get several dark, or black, pages in my scans. I have re installed the software but it still happens
    If I scan 5 or 6 pages I might get 2 good ones and the others black.
    Scanner is about 4 years old.  Do I need a new scanner ?
    Joe Sullivan

    Contact Canon support forum for help
    http://forums.usa.canon.com/
    This topic is far from "Windows 7 Hardware Compatibility " topic, because your scanner has worked for some time.
    I am afraid the you have reached the end of life of your scanner and new scanner is an only option here. Hope this statement is not true one.
    Rgds
    Milos

  • Windows 7 driver for CanoScan LiDE 80?

    Since upgrading to Windows 7, 64 bit, I have searched for a driver for my Canoscan Lide 80. Trying various suggestions to use other drivers like XP, Windows 7 32 bit have all failed. Is there a solution to this problem? Thanks.

    Hello owg1!
    Canon USA does not have a 64bit WIndows 7 driver for the CanoScan LiDE 80 scanner.  We're so sorry for any inconvenience this may cause!  We don't recommend installing other driver versions onto your 64bit Windows 7, but feel free to Contact Us for possible upgrade options available.
    We hope this information helps!

Maybe you are looking for