CanoScan Lide 70 and Twain 64-bit plugin

Is there a downladable Twain driver which is 64-bit, for using CanoScan Lide70 in Photoshop CS6?

There is no Twain support for 64 bit Photoshop unless you wish to try VueScan www.hamrick.com
Windows
In Windows, the Photoshop TWAIN plug-in can be used if you run Photoshop CS6 in 32-bit mode. TWAIN is not supported in Photoshop when it’s run in 64-bit mode. If you need a scanning solution when you run Photoshop CS6 in 64-bit mode, use the WIA (Windows Image Acquisition) interface for your device, if it’s available. WIA is also available for use when running Photoshop in 32-bit mode. Contact your scanner manufacturer for more information.
Mac OS
In Mac OS, you can use the TWAIN plug-in to scan when running Photoshop CS6 (Photoshop CS6 only runs in 64-bit mode). Not many scanner manufacturers have released 64-bit versions of their scanner drivers, so you may not be able to use TWAIN. Contact your scanner manufacturer for more information.
http://helpx.adobe.com/photoshop/kb/twain-plug-photoshop-cs4-cs5.html
Gene

Similar Messages

CanoScan LiDE 700F and Image Capture

I just purchased and received the my Canon Scanner and followed the discussions on the product page not to install the Installation CD from Canon but rather use the Image Capture feature already on my iMac. My issue is that I can't seem to get the scanner to "copy, scan, email or pdf" using the buttons on the actual device. Learning to use Image Capture is all new to me and so is this tiny scanner. The 'scan' button on the computer screen works fine, but I don't know what I am doing incorrectly that the buttons on the scanner do not respond. Any suggestions? Thank you.
Mildred (Moms90)

You can only use the scanners buttons with the Canon driver installed. The ICA driver included with OS X 10.6 that lets you use the scanner with Image Capture does not support the button operation.
You can get the scanner driver for OS X 10.6 from any Canon web site rather than using the included CD, although this model is very new so I believe the driver that is on the web will be the same as is supplied with the CD.

Is there a CanoScan LiDE 60 Driver for Lion?

Mac OS X Lion does not seem to have a driver pre-installed for the CanoScan LiDE 60 scanner. There also is no current option for a lion driver on the scanner's Manufacture support web site. Does anyone know a way to fix this?

Below is the FIX that I received from Canon - long but it works!!!
We are currently in the process of updating the listings on our website.
However, the 10.6 drivers are compatible with OS 10.7/Lion.
If you upgraded from 10.6 to 10.7, the drivers will have to be
reinstalled. The steps below will show you how to remove the drivers
from the system. If any items are not listed, move on to the next step.
Please perform the following:
1. From the Finder, hold the 'Control' key on your keyboard and click
the 'Go' menu at the top of the screen.
2. Open the 'Library' folder.
3. Open the 'Image Capture' folder, then open 'Twain Data Sources'.
4. Trash the CanoScan CanoScan XXXX.ds file.
4-1. Make note of any other files that may be in this folder. If
other files are present, move them to the desktop for now. Then place
them back after successfully using the scanner.
5. Return to the 'Library' folder.
6. Open the 'Preferences'
7. Locate and trash the 'CanoScan XXXX' folder.
8. Close the window and double-click on the Macintosh HD icon.
9. Double-click on the folder named Users.
10. Double-click on the folder named Shared.
11. Trash the folders named CanoScan, or starting with CNQL.
12. Return to the applications folder and Trash the CanoScan Toolbox
folder.
13. Open the Macintosh HD.
14. Open the 'Home' icon on the left (has a picture of a house).
15. Open the Library folder.
16. Open the Preferences Folder.
17. Locate any items named "CanoScan Toolbox", send it to the trash.
18. Restart your computer, then empty the trash.
Once this has been done, we will reinstall. To get your CanoScan LiDE
60 operating on your Mac, please follow these steps:
1. Visit Canon's website at: http://www.usa.canon.com/cusa/support
2. Just below 'Please choose your product from the menus below:',
select your model in the following manner:
2-1. Under Product Type, choose Consumer & Home Office.
2-2. Under Product Family, choose Scanners.
2-3. Under Product Series, choose CanoScan Series.
2-4. Under Models, choose the CanoScan LiDE 60 and click 'GO'.
3. On the Support page for the your unit, click the 'Drivers &
Downloads' tab.
4. Choose [MAC OSX] from the Operating System drop down box.
5. Expand the Driver listing, then click on the LiDE 60 Scanner
Driver, [lide60osx11131en.dmg].
6. Read the License Agreement on the next page, and if you agree,
click on 'I Agree - Begin Download' at the bottom.
7. A File Download box should appear. When it does, select Save.
8. When the Save As box comes up, click Save.
10. Once the download is complete, close all windows.
11. Once the download is complete, go back to the top and click on the
'Support & Service' tab and then click on the 'Drivers & Downloads' tab.
12. Choose [MAC OSX v10.6] from the Operating System drop down box.
13. Click on the CanoScan Toolbox, [cstbosx5014ej4.dmg].
14. Read the License Agreement on the next page, and if you agree,
click on 'I Agree - Begin Download' at the bottom.
15. A File Download box should appear. When it does, select Save.
16. Double click [lide60osx11131en.dmg] to install the scanner driver.
17. Double click [cstbosx4934ej4.dmg] to open the CanoScan Toolbox,
follow the steps to complete the installation.
Once this process is complete, open the CanoScan Toolbox and use the
Save function to test the scanner.

CanoScan LiDE 200 - can't get it to work with 10.6.6

I have a CanoScan LIDE 200 and recently upgraded to 10.6.6, and now I cannot get the scanner to work. I spent 3 hours downloading all the latest drivers and even the Canon IJ Network Scanner Selector. Everything I tried failed and now I'm losing patience. I've never had a problem like this before, downloading the latest driver usually does the trick. Help, please!?

Are you able to add the scanner in Print & Fax? If the scanner does not appear in the Default view when connected to the Mac then the USB cable could be a cause. You can open System Profiler and select USB in the Hardware column on the left. Then in the right pane the LiDE 200 should be listed under one of the USB busses. If the scanner is not showing then try moving it to another USB port on the Mac. If it still fails to show then try another USB cable.

Upgrade from Mac OSX 10.4 to 10.5 + Canoscan Lide 30 Scanner + X11

I have just changed from PC to Mac (iBook G4). The iBook is already set up and workiing properly. Some questions for an inexperienced Mac user:
1. Is it worthwhile changing to OSX 10.5? Will the personal setting be automatically updated or will it led to the inevitable Microsoft crashes?
2. have downloaded drivers (*.dmg) for canoscan lide 30 and tried to install it. The scanner does not work. Which programmes do I need?
3. How/where do I get the latest version of the X11 software for OpenOffice? The downloads from the internet cannot be installed because of the new versions of OSX 10.4.
Thanks in advance for the help.
Kindest reagrds

1. Which iBook model do you have? You need a minimum of 867 mhz, 512MB of memory,
DVD drive for installation and 9GB of available disk space. Doing an upgrade should preserve your user settings. Is it worthwhile? Only you can answer that. Frankly I would stay with Tiger 10.4.11 with your machine.
2. You may need to take that up with Canon.
3.Note 10.4 customers can install X11 by using the Tiger DVD installer disk. See here:
http://overstimulate.com/articles/installing-x11-on-os-x-10-4-tiger

CanoScan LiDE 700F

Hi,
a few months back i bought a macbook pro... os x 6.10.2 ... yesterday i received the canoscan lide 700f and tried to install it... with the cd - but i had to go to the canon side to download the driver... when trying to use the navigator that apparentely was installed sucessfully - again - i had to go to the canon side to download the 'opener EX'... but still - when trying to open the navigator it pops up with the notice that it can't somehow connect?
did anyone have a similar problem - or maybe anyone that knows what i did wrong?
any suggestions?
thank youuuuu :o)

Interesting - I've got the same problem with the LIDE 600F.
I can only get it going by doing a repair permissions & rebooting.
Maybe you could answer a question on the 700F - I was about to buy one but noticed the dpi is 9600 only for film & only 4800 for everything else. I don't understand how that works - I use mine to scan pictures so which would it use?

Upgraded to OS X 10.9 and now cannot connect to Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

I have upgraded to OS X 10.9 and now I cannot connect to my Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??

Like Dan White, I have found that I can still run the Lide 90 under Mavericks. As Dan says, the buttons on the front of the scanner don't work but I rarely if ever used them.
I have just tested the scanner using Acrobat Pro and it loads up the Scangear software to capture the scan, with no problems at all. I didn't have to reinstall anything as it was all there already and working in Mountain Lion. Photoshop CS 5.1 is different; it does not recognise the scanner, presumably because it can't find a TWAIN driver for it. Image Capture does not recognise the scanner either, but I don't have the latest (10.8) Canon MP Explorer and Explorer Opener software installed.

Getting Canon CanoScan Lide 20 to work with 10.4.10 and 10.4.11

When I upgraded to the latest version of Tiger 10.4.10 and .11 ... My Canon Lide 20 which had been working perfectly for years just stopped working. I tried to download the latest driver from canon but kept getting errors. After several different attempts I found this posting on version tracker did what it said and it worked!
"Problems Installing CanonScan Software - Version: 4.1.3, 2/5/2007 06:30AM PST
(3 of 3 users found this comment useful)
robert.loney
For Macintosh OSX users (including intel Macintosh computers) who have problems installing Canon scanner software, including older models. Please try the following steps to successfully install your scanner driver software:
Short Fix:
1. Use the "Deldrv" program to remove previously unsuccessfully installed driver(s). The "Deldrv" uninstaller can be found on the Canon website at the bottom of the Canon scanner driver pop up window that you access to get the drivers for your scanner.
2. Use the "Find?" under the File menu (command-F) or use Spotlight (command spacebar) to find the folder "CFMSupport". Select this folder (don't open it), and use the 'Get info' command in the File menu (command-I) to open information about the Ownership and Permissions of the folder. Click on the arrow beside 'Ownership and Permissions' so it points downwards, then click on the arrow beside 'Details' so you can see the details. Click on the padlock icon so it is unlocked. Then set owner to your user name, set the Group to admin, and set access for all users to Read & Write.
3. Reinstall the CanoScan Toolbox first, then the scanner drivers from the Canon website or your CD, restart your computer."
Uninstalling I think made all the difference. I hadn't done that before. Thanks to Robert Loney for this. I was about to purchase VueScan which also worked... but he saved me $49 buckswhich is more than I paid for the Lide 20 5 years ago.
I also lost my external hard drivers when I upgraded to 10.4.10. never fixed that problem... just went and returned my Western digital Mybooks (both premium and pro additions) (I had been dealing with customer service and returning the ones they kept shipping me for months). I got a Maxtor 750 GB one from Circuit city and it has worked like a charm! I wonder if there was something I needed to uninstall to get that to work as well.
I hope this is helpful to everyone else out there.

To add to Ryan's posting, anyone in the UK/Europe may need to access the Canon US website (http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=351&modelid=6624) to obtain the latest version of the scangear driver 7.0.1.1X and Canoscan software 4.1.3.0. Judging by their file dates these versions appear to have been released in 2007. The Canon Europe site has the older version 7.0.1.0 of the driver.
The tips should may also apply to the LIDE 30 and N670 and other scanners which appear to use the same software.
On my system the permissions on the CFMsupport folder allowed update of the software without changes so you may also find that updating the drivers to these versions is sufficient, and you don't need to bother with the permissions changes.
I have experienced problems with the scan gear software not setting the folder to receive the images correctly. At one point in the scan process - after clicking the scan button - it offered an open file dialogue box rather than a choose folder dialogue. I found that if selected any file in the folder and clicked open the problem seemed to go away.

I have mac OS X, Photoshop CC 64 bit and and i would like to run 32 bit plugins.. How may I do this ?

I have mac OS X, Photoshop CC 64 bit and and i would like to run 32 bit plugins.. How may I do this ?

As said already by JJMack, you cannot do that.
Photoshop CS6, CC & CC 2014 only install a 64-bit version on Mac OS.
Photoshop CS5 installs a version that can launch in either 32 bit or 64 bit when you install on a 64-bit version of Mac OS (Mac OS X 10.5 or later). If you are using Mac OS X 10.4 or earlier, then Photoshop only installs the 32-bit version.
Photoshop CS4 installs a 32-bit version only.
64-bit OS benefits, limitations
~ Arpit

Windows 7 64 bit,CS5 64bit or 32 bit and 32 bit plugins

Hello
Is there a list of 32 bit plugins that will work with Windows7 64 bit and CS5 64 and 32bit?
I use Xenofex2
KPT3
KPT6
KPT Collection
Eye Candy 3.1
Andromeda 3D deluxe
Flo's Undistort
Redfield Plugins
Mike Engles

Hello
Thanks for the reply.
It seems that I will need to spend £110 ($165) to find out. That would go a little way to buying a Canon MPE 65 Macro lens.
Very likely I will say where I am. Windows XP Pro SP2 is good enough.
Thanks
Mike Engles

Can 32-bit plugins remain in plugin folder and not crash Logic?

Pre-sales question:
1) If you have any 32-bit plugins in the plugin folder, can they just be disabled in the Logic X AU manager, or do they crash Logic X upon launch? The reason I ask is because I wanted to keep some in the folder for when I use another DAW that doesn't have a problem with them.
Question on Logic 9:
2) If I am in Mountain Lion, and wanted to run Logic 9 at times, plus Logic X, does Logic 9 have to be set to run at 32-bit so that it could still use the 32-bit plugins?
3) If Logic 9 is running in 64-bit mode, can it access the 32-bit plugins in Mountain Lion?
I know the only thing will be that I can't open a Logic X session back in Logic 9, but I might want to bounce a quick part back in Logic 9 that uses a 32-bit plugin.
Thanks.

hi
1. Yes you can leave your 32bit plugins in Component folder. Logic X just ignore them.They don't crash LPX
2. Logic 9 can run with Logic X installed. It doesn't matter if you run LP9 in 32 or 64bit mode.LP 9 will work
as before.
3. Yes Logic 32bit mode can access 32bit plugins through the bridgre as before
B

I have a CanoScan Lide 700F scanner ,how do I scan Black and white neg.and turn them into positives?

I am scaning all old pictures, docts, slides ,but I have alot of b&w negs verious sizes, how can I turn them into b&w positives??

Hi Teddy.
The MP Navigator EX software that was bundled with your CanoScan LiDE 700F can be used to scan your black and white negatives. To use the MP Navigator, please follow these steps:
1. Start MP Navigator EX and open the Navigation Mode screen.
2. Point to Scan/Import and click Film.
3. Place the film on the Platen.
4. Click Specify... to set the document size and scanning resolution as required.
5. When setting is completed, click OK.
Important
Film may not be scanned correctly when Film Type in the Scan Settings dialog box is set to Auto. In that case, select the type of film in Film Type and scan again.
Note
To scan black and white film, it is recommended that you select Black and White Negative Film or Black and White Positive Film for Film Type in the Scan Settings dialog box.
6. Click Scan. Preview scan starts. When preview scan of the film is completed, the preview image appears.
Important
If a message for calibration appears, remove the film, then place the Film Adapter Unit over the first frame of the Film Guide and click OK.
7. When the calibration is completed, follow the on-screen instructions to load the film into the Film Guide, then click OK.
Note
Preview image does not appear when the Preview before scanning checkbox is not selected in the Scan Settings dialog box. The scanned images appear directly in the Thumbnail window.
8. Select the checkbox of the frame and click Scan. When scanning is completed, the Scan Complete dialog box opens.
9. Select Scan or Exit. To scan another frame, place the Film Adapter Unit over the frame you want to scan, then select Scan. Select Exit to end.
The scanned images appear in the Thumbnail window.
10. Edit the scanned images as required. Use Edit Tools to rotate images, select a part of an image, etc.
Note
First select images to edit. (Selected images are outlined in orange.) Drag the mouse or use Shift + arrow keys to select multiple images.
11. Save the scanned images.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Plugins and twain for CS5

I spent four hours trying to find the plugins and twain drivers for CS5 that the "read me" file for CS5 said was available for download. They even gave a link for them. Finally called them and spent another hour and and a half on the phone and was transferred three times just to find out they have not put them online yet. THANKS GUYS. Why don't you put them up "before" telling people that they are there.
Also, why were these features taken out. It is kind of like buying a new car and when they deliver it the radio is missing and they tell you to come back in a couple of days and look in the back of the parking lot for it and put it in yourself. Then when you you can't find they say "oops, we forgot to put it there."
Anyway does any one know when "picture package, web photo gallery, twain and other old wonderfull plugins" are going to be available?
If you use these features you might as well wait to buy CS5!

That's really the point--the problem isn't so much that Adobe didn't have the TWAIN/extras plugin pack ready to go at CS5 launch (though I'd much rather they did), it's that the most obvious link to said pack:
http://www.adobe.com/go/ps_cs5_plugins_mac_en
...doesn't lead to a placeholder page that says "These plugins aren't available yet, please be patient." ...or better yet "...fill out this form to get an email when they are ready for download." Heck, it doesn't even lead to a 404--it immediately (and confusingly) redirects to the Adobe home page. It's that an official URL for the product exists and is linked from more than one place, but doesn't have anything there to tell people what's up when they use the built-in Help feature and click on it.
Thus, when I did a search from within CS5 for TWAIN, it came up with an article that answered my question exactly. I clicked the link, and ended up at the Adobe home page. "Huh? Oh, I guess I have to search for it myself..." A half hour wasted later I finally surmised that, indeed, it just wasn't available for download yet. Launch weekend, I suppose that's understandable. A week later, I'd at least expect a placeholder. (And I never did find the above-linked document that does explain what's up in my own searching--I just got the helpful-but-useless help page I linked).
I also wish I'd known about this before I started my 30 day trial; for all I know it's going to be over a month before the plugin is ready, which would mean I would have to buy CS5 without having any idea whether the TWAIN interface is going to be so crash-prone as to be useless, or just fine.

Update both CS6 and CS6 64-bit apps?

Adobe Application Manager is showing updates for both regular CS6 and CS6 64-bit versions of Creative Suites apps like Illustrator, Photoshop and Dreamweaver. These were both automatically installed on my system when I downloaded from the cloud. Do i need to update both? Do I even need to have both on my system?
Thanks.

The Cloud installer installs both 32 bit and 64 bit versions of some apps on 64 bit systems because we're in a transition between 32 bit and 64 bit computing.
Soon 64 bit will be everywhere. Until then some people with 64 bit systems still need occasional access to 32 bit plugins (TWAIN for scanning comes to mind http://helpx.adobe.com/photoshop/kb/twain-plug-photoshop-cs4-cs5.html) which have not yet been upgraded to 64 bit by the plugin vendor. So they open 32 bit Photoshop, run their filter then close it and launch 64 bit Photoshop.
http://helpx.adobe.com/photoshop/kb/64-bit-os-benefits-limitations.html

CanoScan LiDE 220 error Cannot communicate with scanner Error 2, 156,182

A month ago I bought a scanner the "Canon CanoScan LiDE 220" .
I get this scanner after a month of testing not stable / operational.
I keep getting the following error message :
and also the error 2, 156, 182
Configuration:
A. Mobo ASUS X99-A > with the latest Bios Level
B. Windows 7 64-Bit
C. When connected to a USB 2.0 or 3.0 does not matter.
D. Scan Driver is the
http://www.canon.nl/support/consumer_products/products/scanners/lide_series/canoscan_lide_220.aspx
CanoScan LiDE 220 Scanner Driver v. 1.01 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP)
File version: 1:01
Release date: April 24, 2015
E. Quick Menu v 2.5.0 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP) File version: . 2.5.0 " is used.
Please help me, It's very frustrating when you buy new stuff and it all turns out not to work.
Regards,
Rob Blankestijn

I am also getting a similar error, except mine is "Code:2,156,182"
If anyone is also getting these errors or if someone on Canon tech support could rectify this, I would really appreciate it.

CanoScan Lide 70 and Twain 64-bit plugin

Similar Messages

Maybe you are looking for