CanoScan LiDE 700F

Hi,
a few months back i bought a macbook pro... os x 6.10.2 ... yesterday i received the canoscan lide 700f and tried to install it... with the cd - but i had to go to the canon side to download the driver... when trying to use the navigator that apparentely was installed sucessfully - again - i had to go to the canon side to download the 'opener EX'... but still - when trying to open the navigator it pops up with the notice that it can't somehow connect?
did anyone have a similar problem - or maybe anyone that knows what i did wrong?
any suggestions?
thank youuuuu :o)

Interesting - I've got the same problem with the LIDE 600F.
I can only get it going by doing a repair permissions & rebooting.
Maybe you could answer a question on the 700F - I was about to buy one but noticed the dpi is 9600 only for film & only 4800 for everything else. I don't understand how that works - I use mine to scan pictures so which would it use?

Similar Messages

  • Image capture won't recognize Canoscan lide 700f

    Hello.  I have OS X, v. 10.6.7   I have been using Image Capture to run the Canoscan lide 700f scanner.  Then, it stopped recognizing the scanner.   Image capture is opened and says "no camera or scanner attached."  The scanner is operational.  The MAC sees the printer in systems preferences > hardware > print and fax. Any ideas on what I can do to get this scanner recognized by Image Capture again?  Thanks for your help.

    I had the problem with the same scanner and Lion.  When the Mac would go to sleep, Image Capture would not recognize the scanner after it woke up.  Had to unplug and replug the USB connector to get it to start correctly.  I was blaming it on the scanner driver, but I accidently discovered that if I opened Adobe Photoshop Elements 6, all of a sudden the scanner would respond to an attempt to import from the scanner (to Elements).  After that, Image Capture could talk to it just fine.  So it appears that it is an Image Capture problem and not an issue with the Cannon driver.

  • I have a CanoScan Lide 700F scanner ,how do I scan Black and white neg.and turn them into positives?

    I am scaning all old pictures, docts,  slides ,but I have alot of b&w negs verious sizes, how can I turn  them into b&w positives??

    Hi Teddy.
    The MP Navigator EX software that was bundled with your CanoScan LiDE 700F can be used to scan your black and white negatives.  To use the MP Navigator, please follow these steps:
     1.  Start MP Navigator EX and open the Navigation Mode screen.
     2.  Point to Scan/Import and click Film.
     3.  Place the film on the Platen.
     4.  Click Specify... to set the document size and scanning resolution as required.
     5.  When setting is completed, click OK.
    Important
    Film may not be scanned correctly when Film Type in the Scan Settings dialog box is set to Auto. In that case, select the type of film in Film Type and scan again.
    Note
    To scan black and white film, it is recommended that you select Black and White Negative Film or Black and White Positive Film for Film Type in the Scan Settings dialog box.
     6.  Click Scan.  Preview scan starts.  When preview scan of the film is completed, the preview image appears.
    Important
    If a message for calibration appears, remove the film, then place the Film Adapter Unit over the first frame of the Film Guide and click OK.
     7.  When the calibration is completed, follow the on-screen instructions to load the film into the Film Guide, then click OK.
    Note
    Preview image does not appear when the Preview before scanning checkbox is not selected in the Scan Settings dialog box. The scanned images appear directly in the Thumbnail window.
     8.  Select the checkbox of the frame and click Scan.  When scanning is completed, the Scan Complete dialog box opens.
     9.  Select Scan or Exit. To scan another frame, place the Film Adapter Unit over the frame you want to scan, then select Scan. Select Exit to end.
    The scanned images appear in the Thumbnail window.
    10.  Edit the scanned images as required.  Use Edit Tools to rotate images, select a part of an image, etc.
    Note
    First select images to edit. (Selected images are outlined in orange.) Drag the mouse or use Shift + arrow keys to select multiple images.
    11.  Save the scanned images.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • CanoScan LiDE 700F Scanner not opening up

    Whenever I try to scan anything with CanoScan LiDE 700F scanner my computer gives the message "scanner reported an error. An error ocurred while communicating with the scanner." I have to unplug and plug back the USB port and only hten it opens up.  When I try to open the scanner with System Preferences, scanner opens up, but as soon as I hit "scan" the same error message pops up.  I uploaded the latest driver from Canon website, but the problem persists.  I also deleted and re-installed the sanner in system preferences, but it didn't help.
    It used to work fine when I initially installed it (on Leopard), but then suddenly this problem arose.

    This same error message was first noticed on 10.6. It would only occur after waking the Mac from sleep. Prior to the sleep state you could scan using Image Capture without error. But if the Mac entered a sleep state with the scanner connected, after waking it and then trying to scan, the error message would appear. And as you have found, the quick solution is to unplug the USB cable and then reconnect it.
    This problem only occurs with Canon scanners that use USB power. The models that have their own power supply, or the All In One devices with scanner, do not suffer the same fate. Apple Engineering is aware of this and have told me that it is up to Canon to fix.
    Note that the same problem does not occur when using Canon's MP Navigator application. This application uses the full TWAIN-based scanner driver, whereas Image Capture and Preview use the ICA driver, and works fine after waking the Mac from a sleep state.

  • CanoScan LiDE 700F and Image Capture

    I just purchased and received the my Canon Scanner and followed the discussions on the product page not to install the Installation CD from Canon but rather use the Image Capture feature already on my iMac. My issue is that I can't seem to get the scanner to "copy, scan, email or pdf" using the buttons on the actual device. Learning to use Image Capture is all new to me and so is this tiny scanner. The 'scan' button on the computer screen works fine, but I don't know what I am doing incorrectly that the buttons on the scanner do not respond. Any suggestions? Thank you.
    Mildred (Moms90)

    You can only use the scanners buttons with the Canon driver installed. The ICA driver included with OS X 10.6 that lets you use the scanner with Image Capture does not support the button operation.
    You can get the scanner driver for OS X 10.6 from any Canon web site rather than using the included CD, although this model is very new so I believe the driver that is on the web will be the same as is supplied with the CD.

  • Image Capture does not recognize my CanoScan LiDE 700F after downloading pix via iPhoto.

    My scanner was working fine. I downloaded some photos using iPhoto. My computer now does not recognize my scanner when I use ImageCapture. I think this happened once before but I can't remember how I remedied the situation. In researching the scanner before purchase, I discovered many reviews that indicated "don't download the software; it doesn't work: just use ImageCapture. That has worked well....until now. Any suggestions?

    Try resetting the printing system. It can also affect the scanner.
    OS X Mavericks: Reset the printing system
    You can also check for drivers here.
    Gimp - Print
    HPIJS for Mac OS X

  • Canoscan Lide 200 will not start

    After upgrading to Yosemite, when I plug in my USB-driven Canon scanner (into my Macbook Air from 2010) I get an error message advising that "a problem" occurred. Anyone else finding that a Canoscan Lide scanner will not start in Yosemite? Any suggestions as how to fix this situation? Thanks in advance.

    Many thanks as well from me.
    I was having a similar problem after upgrading to Yosemite with a USB CanoScan LiDE 700F. Don't think I had to install any drivers under Mavericks. Under Yosemite it just appears dead. Nothing ever happens. But, did see this error in Console whenever I plugged in the scanner. Then via a search found the above post.
    For the LiDE 700F files are at:
    http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan _lide_700f#DriversAndSoftware
    Console details for Canon IJscanner2 crashes :
    Process:               Canon IJScanner2 [15959]
    Path:                  /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/MacOS/Canon IJScanner2
    Identifier:            jp.co.canon.ijscanner2.scanner.ica
    Build Info:            ScanningCanon-1~1
    Responsible:           Canon IJScanner2 [15959]
      Library not loaded: /Library/Printers/Canon/IJScanner/Frameworks/CIJSDA.framework/Versions/A/CIJSDA
      Referenced from: /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/MacOS/Canon IJScanner2

  • How do I scan multiple pages into one document using the CanoScan LiDE 200?

    How do I scan multiple pages into one document using the CanoScan LiDE 200?
    I can't seem to find a way to get them to scan continuously, or a way to stitch them together afterwards.

    Hi dagda24,
    You can scan multiple pages into a single document with the scan to PDF option.  Use the following steps to do so:
    1.  Open MP Navigator.
    2.  Click One Clcik.
    3.  Click Save to PC.
    4.  Change the File Type from PDF to PDF (multiple pages).
    5.  Make any other changes as needed, then click scan.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How do you get canoscan lide 110 scanner to display in "file import" menu?

    I have several older versions of Photoshop Elements running on various computers.  In ALL of them, if you go to "File>Import" you see "Canoscan LIDE xx".  when you choose it, there is a great scanning application that runs. On a newer computer, i had Photoshop CS5.5 installed.  It only shows WIA under the import menu.  The scanning software there is horrible.  I tried installing the same scanner (lide 110) on an older computer running older photoshop elements and it showed up.  i then installed a older version of the elements software on the new computer.  Again, the scanner showed up.  Not wanting to break licensing agreements, i just downloaded a brand new version of photoshop elements 12 and installed it.  it only shows WIA in the file/import menu and not the scanner. therefore, i dont have the scanning software/application i need.  without it, this version of elements is 100% useless to me.  can someone please help me get my scanner to appear in the "file>import" menu?  Yes, i do have the latest version of software downloaded from canon's website.

    Hi,
    I believe that this is where PC & MAC versions differ.
    The PC version  will "get from scanner" in the organizer but the MAC version has to "Import from scanner" in the editor. I don't know why they act differently.
    It has been posted on this forum (can't find thread at the moment) a fix for the windows version of copying a module from a previous version if you had one. That is not an official fix.
    If I find the link I'll post back.
    Brian

  • Is CanoScan LiDE 220 compatible with Photoshop Elements 6 & 8

    I purchased a CanoScan LiDE 220 scanner. My Adobe Photoshop Elements 6 & 8 do not recognize CanoScan LiDE 220,
    When I go to  File and import CanoScan LiDE 220 does not appear.
    Is CanoScan LiDE 220 compatible with Photoshop Elements 6 & 8
    Thankyou
    Ken

    Looks like it exceeds PSE 12 System Requirements.
    http://www.adobe.com/products/photoshop-elements/tech-specs.html

  • CanoScan LiDE 200 - can't get it to work with 10.6.6

    I have a CanoScan LIDE 200 and recently upgraded to 10.6.6, and now I cannot get the scanner to work. I spent 3 hours downloading all the latest drivers and even the Canon IJ Network Scanner Selector. Everything I tried failed and now I'm losing patience. I've never had a problem like this before, downloading the latest driver usually does the trick. Help, please!?

    Are you able to add the scanner in Print & Fax? If the scanner does not appear in the Default view when connected to the Mac then the USB cable could be a cause. You can open System Profiler and select USB in the Hardware column on the left. Then in the right pane the LiDE 200 should be listed under one of the USB busses. If the scanner is not showing then try moving it to another USB port on the Mac. If it still fails to show then try another USB cable.

  • Canoscan LiDE 25 Only Scans at Low-Resolution

    Since upgrading to Snow Leopard, I can't get a high-res scan out of Image Capture with my Canoscan LiDE 25. I've downloaded the 11.031 drivers from Canon's site but didn't improve anything.
    I open image capture, choose the advanced options, let it run the overview scan, turn off the "Detect Separate Items" checkbox, resize the border to the part I want to scan, choose a scan location and filename, then turn up the resolution to 150 DPI. The scan runs really fast and then create a ~125 x 90 pixel image from the ~3" x 2" graphic I'm scanning. The same thing happens when I try to do a "Import from scanner" in Preview.
    The Canon tools don't work with the latest driver version; anyone have an idea about how to get high-res scans again? (Besides buying VueScan…)

    I know it's a great program — back when I worked in academic technology I convinced management to switch our computer labs to VueScan for both Mac and Windows.
    However, considering I scan maybe 3 times a year, it seems there should be a solution for basic scanning that doesn't require a $40 license.

  • Canoscan Lide 25

    Does anybody know whether it works in 10.6, either through Canon's ScanGear tool or through Apple's Image Capture?

    Canon Customer support let me know the following: "With regards to the new Apple Macintosh Operating System that has just been released, the CanoScan LiDE 25 will be supported. You can expect a new driver and application to be available for download on our website in the coming weeks. "

  • Is there a CanoScan LiDE 60 Driver for Lion?

    Mac OS X Lion does not seem to have a driver pre-installed for the CanoScan LiDE 60 scanner. There also is no current option for a lion driver on the scanner's Manufacture support web site. Does anyone know a way to fix this?

    Below is the FIX that I received from Canon - long but it works!!!
    We are currently in the process of updating the listings on our website.
    However, the 10.6 drivers are compatible with OS 10.7/Lion.
    If you upgraded from 10.6 to 10.7, the drivers will have to be
    reinstalled.  The steps below will show you how to remove the drivers
    from the system.  If any items are not listed, move on to the next step.
    Please perform the following:
    1. From the Finder, hold the 'Control' key on your keyboard and click
    the 'Go' menu at the top of the screen.
    2.  Open the 'Library' folder.
    3.  Open the 'Image Capture' folder, then open 'Twain Data Sources'.
    4.  Trash the CanoScan CanoScan XXXX.ds file.
        4-1.  Make note of any other files that may be in this folder.  If
    other files are present, move them to the desktop for now.  Then place
    them back after successfully using the scanner.
    5.  Return to the 'Library' folder.
    6.  Open the 'Preferences'
    7.  Locate and trash the 'CanoScan XXXX' folder.
    8.  Close the window and double-click on the Macintosh HD icon.
    9.  Double-click on the folder named Users.
    10. Double-click on the folder named Shared.
    11. Trash the folders named CanoScan, or starting with CNQL.
    12. Return to the applications folder and Trash the CanoScan Toolbox
    folder.
    13. Open the Macintosh HD.
    14. Open the 'Home' icon on the left (has a picture of a house).
    15. Open the Library folder.
    16. Open the Preferences Folder.
    17. Locate any items named "CanoScan Toolbox", send it to the trash.
    18. Restart your computer, then empty the trash.
    Once this has been done, we will reinstall.  To get your CanoScan LiDE
    60 operating on your Mac, please follow these steps:
    1.  Visit Canon's website at:          http://www.usa.canon.com/cusa/support
    2.  Just below 'Please choose your product from the menus below:',
    select your model in the following manner:
      2-1.  Under Product Type, choose Consumer & Home Office.
      2-2.  Under Product Family, choose Scanners.
      2-3.  Under Product Series, choose CanoScan Series.
      2-4.  Under Models, choose the CanoScan LiDE 60 and click 'GO'.
    3.  On the Support page for the your unit, click the 'Drivers &
    Downloads' tab.
    4.  Choose [MAC OSX] from the Operating System drop down box.
    5.  Expand the Driver listing, then click on the LiDE 60 Scanner
    Driver, [lide60osx11131en.dmg].
    6.  Read the License Agreement on the next page, and if you agree,
    click on 'I Agree - Begin Download' at the bottom.
    7.  A File Download box should appear. When it does, select Save.
    8.  When the Save As box comes up, click Save.
    10.  Once the download is complete, close all windows.
    11.  Once the download is complete, go back to the top and click on the
    'Support & Service' tab and then click on the 'Drivers & Downloads' tab.
    12.  Choose [MAC OSX v10.6] from the Operating System drop down box.
    13.  Click on the CanoScan Toolbox, [cstbosx5014ej4.dmg].
    14.  Read the License Agreement on the next page, and if you agree,
    click on 'I Agree - Begin Download' at the bottom.
    15.  A File Download box should appear. When it does, select Save.
    16.  Double click [lide60osx11131en.dmg] to install the scanner driver.
    17.  Double click [cstbosx4934ej4.dmg] to open the CanoScan Toolbox,
    follow the steps to complete the installation. 
    Once this process is complete, open the CanoScan Toolbox and use the
    Save function to test the scanner.

  • CanoScan LiDE 220 error Cannot communicate with scanner Error 2, 156,182

    A month ago I bought a scanner the "Canon CanoScan LiDE 220" .
    I get this scanner after a month of testing not stable / operational.
    I keep getting the following error message :
    and also the error 2, 156, 182
    Configuration:
    A. Mobo ASUS X99-A > with the latest Bios Level
    B. Windows 7 64-Bit
    C. When connected to a USB 2.0 or 3.0 does not matter.
    D. Scan Driver is the
    http://www.canon.nl/support/consumer_products/products/scanners/lide_series/canoscan_lide_220.aspx
    CanoScan LiDE 220 Scanner Driver v. 1.01 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP)
    File version: 1:01
    Release date: April 24, 2015
    E. Quick Menu v 2.5.0 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP) File version: . 2.5.0 " is used.
    Please help me, It's very frustrating when you buy new stuff and it all turns out not to work.
    Regards,
    Rob Blankestijn

    I am also getting a similar error, except mine is "Code:2,156,182"
    If anyone is also getting these errors or if someone on Canon tech support could rectify this, I would really appreciate it. 

Maybe you are looking for