Canoscan LiDE 80 not responding

My Canoscan LiDe 80 stopped working while running Mac OS X 10.5.8 (9L30). I installed Canoscan Toolbox 5.0, but the program still can't find the driver. Any advice?
Thanks!

Hello,
Mine is working on Maverick with Snow Leopard Drivers :
CanoScan Toolbox 4.9.3.4
Lide Driver 1.11.3.1
But I have some issues :
Sometime the scanner is not visible under Print & Scan view (system preference)
CanoScanToolbox complain about the driver : but I reinitialize the scanner with CanoScan Toolbox > Setup > Reinit and the scanner work
Hope I was helpful
Stéphane

Similar Messages

Canoscan Lide 200 will not start

After upgrading to Yosemite, when I plug in my USB-driven Canon scanner (into my Macbook Air from 2010) I get an error message advising that "a problem" occurred. Anyone else finding that a Canoscan Lide scanner will not start in Yosemite? Any suggestions as how to fix this situation? Thanks in advance.

Many thanks as well from me.
I was having a similar problem after upgrading to Yosemite with a USB CanoScan LiDE 700F. Don't think I had to install any drivers under Mavericks. Under Yosemite it just appears dead. Nothing ever happens. But, did see this error in Console whenever I plugged in the scanner. Then via a search found the above post.
For the LiDE 700F files are at:
http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan _lide_700f#DriversAndSoftware
Console details for Canon IJscanner2 crashes :
Process:               Canon IJScanner2 [15959]
Path:                  /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/MacOS/Canon IJScanner2
Identifier:            jp.co.canon.ijscanner2.scanner.ica
Build Info:            ScanningCanon-1~1
Responsible:           Canon IJScanner2 [15959]
Library not loaded: /Library/Printers/Canon/IJScanner/Frameworks/CIJSDA.framework/Versions/A/CIJSDA
Referenced from: /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/MacOS/Canon IJScanner2

CanoScan LiDE 700F Scanner not opening up

Whenever I try to scan anything with CanoScan LiDE 700F scanner my computer gives the message "scanner reported an error. An error ocurred while communicating with the scanner." I have to unplug and plug back the USB port and only hten it opens up. When I try to open the scanner with System Preferences, scanner opens up, but as soon as I hit "scan" the same error message pops up. I uploaded the latest driver from Canon website, but the problem persists. I also deleted and re-installed the sanner in system preferences, but it didn't help.
It used to work fine when I initially installed it (on Leopard), but then suddenly this problem arose.

This same error message was first noticed on 10.6. It would only occur after waking the Mac from sleep. Prior to the sleep state you could scan using Image Capture without error. But if the Mac entered a sleep state with the scanner connected, after waking it and then trying to scan, the error message would appear. And as you have found, the quick solution is to unplug the USB cable and then reconnect it.
This problem only occurs with Canon scanners that use USB power. The models that have their own power supply, or the All In One devices with scanner, do not suffer the same fate. Apple Engineering is aware of this and have told me that it is up to Canon to fix.
Note that the same problem does not occur when using Canon's MP Navigator application. This application uses the full TWAIN-based scanner driver, whereas Image Capture and Preview use the ICA driver, and works fine after waking the Mac from a sleep state.

Canon LiDE 100 does not respond after wake from sleep

I have a Canon LiDE 100 flatbed scanner. I constantly put my iMac to sleep and only ever shut it down once every few weeks.
When the computer wakes from sleep the scanner does not respond. Image Capture lists the scanner in the device list but reports the following error;
"An error occurred whilst communicating with the scanner"
I have to unplug the USB cable and plug it back in for it to work (or restart the computer, both always work).
Since I only moved to the Macintosh in July I have no idea how to uninstall drivers to give myself a fresh start and the scanner does not come with an uninstall utility.
Any suggestions on how to fix this little problem?
Thanks.

I am going to respond to my self and say I am nuts.
Canon does not seem to have any uninstaller for this scanner on their site:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=351&modelid=17104
Which is rather odd since they have installers. this is different from most of their other older scanners. But if you just plugged in our scanner and things worked in OSX, which it should have, then you should be OK.
However I can confirm that others see this issue (like my dad) and here is the official Canon response to the issue:
+Dear XXXX:+
+In some cases, coming out of sleep mode may not properly reinitialize+
+the USB bus on Macintosh Operating Systems. Unfortunately, the only+
+work around when this happens is to restart the computer.+
Of course this in not exactly true as logging out and back in fixes it.

MACBOOK PRO is frozen. Keyboard and Trackpad do not respond. Computer will not shut down. Tried to close lid and reopen after 1'min but no response.

Brand New MACBOOK PRO just froze up and will not respond or even shut down.
Cannot find any support except for this.
Apple will not support unless you have bought a support package and is now offering to sell you this package.
Makes me ponder the thought that this is all a scamm to get more money out of the customer and this program (virus) was purposely loaded during one of the updates.
Not sure what I bought here but my respect for apple and its products is deteriorating rapidly.

Apple will not support unless you have bought a support package and is now offering to sell you this package.
I'm not sure where you got that idea. All Macs come with free phone support for the first 90 days:
http://www.apple.com/support/complimentary/
Further, you can always make an appointment at the Genius Bar of your nearest Apple Store and take the machine there for free advice and basic diagnostics (though any service may cost money outside the warranty).
Finally, Apple offers a 14-day, no-questions-asked return policy. If your machine isn't working properly right out of the box, take it back and get a different one.
Makes me ponder the thought that this is all a scamm to get more money out of the customer and this program (virus) was purposely loaded during one of the updates.
That's a pretty ridiculous thing to say that clearly indicates an utter lack of understanding of how the tech world works. I appreciate that you're upset, but please try to stick to reality here. You won't get much sympathy from anyone saying silly things like this.

CanoScan LiDE 25 will not work. aaaaaaarrgh!!

I have been trying to install drivers and software for my CanoScan LiDE 25.
In my latest attempt, I actually get the drivers to install, but then I get an error message when I plug in the scanner.
I think this question is less of a cry for help and more just wondering if ANYONE has got their older CanoScan scanner to work under OS X 10.5.5?

After numerous attempts at d/l and installing the supposedly correct driver for my Canon Lide 60 I gave up and bought a new scanner. I tried VueScan and then realised that the cost of signing up for it, in about 2 years, would be MORE than cost of a complete new scanner.
Now I think of it as VueScam. Some smart person who, knowing there are issues on the Mac with many scanners, has moved in with a product you can't just buy, but have to subscribe to.
The other pain in the * about VueScan is the almost endless updates that you have to install on an almost weekly basis. Who needs that? Now instead, I have a fully functional scanner.
I'll never buy another Canon product again.

Image capture won't recognize Canoscan lide 700f

Hello. I have OS X, v. 10.6.7 I have been using Image Capture to run the Canoscan lide 700f scanner. Then, it stopped recognizing the scanner. Image capture is opened and says "no camera or scanner attached." The scanner is operational. The MAC sees the printer in systems preferences > hardware > print and fax. Any ideas on what I can do to get this scanner recognized by Image Capture again? Thanks for your help.

I had the problem with the same scanner and Lion. When the Mac would go to sleep, Image Capture would not recognize the scanner after it woke up. Had to unplug and replug the USB connector to get it to start correctly. I was blaming it on the scanner driver, but I accidently discovered that if I opened Adobe Photoshop Elements 6, all of a sudden the scanner would respond to an attempt to import from the scanner (to Elements). After that, Image Capture could talk to it just fine. So it appears that it is an Image Capture problem and not an issue with the Cannon driver.

How do you get canoscan lide 110 scanner to display in "file import" menu?

I have several older versions of Photoshop Elements running on various computers. In ALL of them, if you go to "File>Import" you see "Canoscan LIDE xx". when you choose it, there is a great scanning application that runs. On a newer computer, i had Photoshop CS5.5 installed. It only shows WIA under the import menu. The scanning software there is horrible. I tried installing the same scanner (lide 110) on an older computer running older photoshop elements and it showed up. i then installed a older version of the elements software on the new computer. Again, the scanner showed up. Not wanting to break licensing agreements, i just downloaded a brand new version of photoshop elements 12 and installed it. it only shows WIA in the file/import menu and not the scanner. therefore, i dont have the scanning software/application i need. without it, this version of elements is 100% useless to me. can someone please help me get my scanner to appear in the "file>import" menu? Yes, i do have the latest version of software downloaded from canon's website.

Hi,
I believe that this is where PC & MAC versions differ.
The PC version will "get from scanner" in the organizer but the MAC version has to "Import from scanner" in the editor. I don't know why they act differently.
It has been posted on this forum (can't find thread at the moment) a fix for the windows version of copying a module from a previous version if you had one. That is not an official fix.
If I find the link I'll post back.
Brian

Is CanoScan LiDE 220 compatible with Photoshop Elements 6 & 8

I purchased a CanoScan LiDE 220 scanner. My Adobe Photoshop Elements 6 & 8 do not recognize CanoScan LiDE 220,
When I go to File and import CanoScan LiDE 220 does not appear.
Is CanoScan LiDE 220 compatible with Photoshop Elements 6 & 8
Thankyou
Ken

Looks like it exceeds PSE 12 System Requirements.
http://www.adobe.com/products/photoshop-elements/tech-specs.html

CanoScan LiDE 200 - can't get it to work with 10.6.6

I have a CanoScan LIDE 200 and recently upgraded to 10.6.6, and now I cannot get the scanner to work. I spent 3 hours downloading all the latest drivers and even the Canon IJ Network Scanner Selector. Everything I tried failed and now I'm losing patience. I've never had a problem like this before, downloading the latest driver usually does the trick. Help, please!?

Are you able to add the scanner in Print & Fax? If the scanner does not appear in the Default view when connected to the Mac then the USB cable could be a cause. You can open System Profiler and select USB in the Hardware column on the left. Then in the right pane the LiDE 200 should be listed under one of the USB busses. If the scanner is not showing then try moving it to another USB port on the Mac. If it still fails to show then try another USB cable.

Is there a CanoScan LiDE 60 Driver for Lion?

Mac OS X Lion does not seem to have a driver pre-installed for the CanoScan LiDE 60 scanner. There also is no current option for a lion driver on the scanner's Manufacture support web site. Does anyone know a way to fix this?

Below is the FIX that I received from Canon - long but it works!!!
We are currently in the process of updating the listings on our website.
However, the 10.6 drivers are compatible with OS 10.7/Lion.
If you upgraded from 10.6 to 10.7, the drivers will have to be
reinstalled. The steps below will show you how to remove the drivers
from the system. If any items are not listed, move on to the next step.
Please perform the following:
1. From the Finder, hold the 'Control' key on your keyboard and click
the 'Go' menu at the top of the screen.
2. Open the 'Library' folder.
3. Open the 'Image Capture' folder, then open 'Twain Data Sources'.
4. Trash the CanoScan CanoScan XXXX.ds file.
4-1. Make note of any other files that may be in this folder. If
other files are present, move them to the desktop for now. Then place
them back after successfully using the scanner.
5. Return to the 'Library' folder.
6. Open the 'Preferences'
7. Locate and trash the 'CanoScan XXXX' folder.
8. Close the window and double-click on the Macintosh HD icon.
9. Double-click on the folder named Users.
10. Double-click on the folder named Shared.
11. Trash the folders named CanoScan, or starting with CNQL.
12. Return to the applications folder and Trash the CanoScan Toolbox
folder.
13. Open the Macintosh HD.
14. Open the 'Home' icon on the left (has a picture of a house).
15. Open the Library folder.
16. Open the Preferences Folder.
17. Locate any items named "CanoScan Toolbox", send it to the trash.
18. Restart your computer, then empty the trash.
Once this has been done, we will reinstall. To get your CanoScan LiDE
60 operating on your Mac, please follow these steps:
1. Visit Canon's website at: http://www.usa.canon.com/cusa/support
2. Just below 'Please choose your product from the menus below:',
select your model in the following manner:
2-1. Under Product Type, choose Consumer & Home Office.
2-2. Under Product Family, choose Scanners.
2-3. Under Product Series, choose CanoScan Series.
2-4. Under Models, choose the CanoScan LiDE 60 and click 'GO'.
3. On the Support page for the your unit, click the 'Drivers &
Downloads' tab.
4. Choose [MAC OSX] from the Operating System drop down box.
5. Expand the Driver listing, then click on the LiDE 60 Scanner
Driver, [lide60osx11131en.dmg].
6. Read the License Agreement on the next page, and if you agree,
click on 'I Agree - Begin Download' at the bottom.
7. A File Download box should appear. When it does, select Save.
8. When the Save As box comes up, click Save.
10. Once the download is complete, close all windows.
11. Once the download is complete, go back to the top and click on the
'Support & Service' tab and then click on the 'Drivers & Downloads' tab.
12. Choose [MAC OSX v10.6] from the Operating System drop down box.
13. Click on the CanoScan Toolbox, [cstbosx5014ej4.dmg].
14. Read the License Agreement on the next page, and if you agree,
click on 'I Agree - Begin Download' at the bottom.
15. A File Download box should appear. When it does, select Save.
16. Double click [lide60osx11131en.dmg] to install the scanner driver.
17. Double click [cstbosx4934ej4.dmg] to open the CanoScan Toolbox,
follow the steps to complete the installation.
Once this process is complete, open the CanoScan Toolbox and use the
Save function to test the scanner.

CanoScan LiDE 220 error Cannot communicate with scanner Error 2, 156,182

A month ago I bought a scanner the "Canon CanoScan LiDE 220" .
I get this scanner after a month of testing not stable / operational.
I keep getting the following error message :
and also the error 2, 156, 182
Configuration:
A. Mobo ASUS X99-A > with the latest Bios Level
B. Windows 7 64-Bit
C. When connected to a USB 2.0 or 3.0 does not matter.
D. Scan Driver is the
http://www.canon.nl/support/consumer_products/products/scanners/lide_series/canoscan_lide_220.aspx
CanoScan LiDE 220 Scanner Driver v. 1.01 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP)
File version: 1:01
Release date: April 24, 2015
E. Quick Menu v 2.5.0 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP) File version: . 2.5.0 " is used.
Please help me, It's very frustrating when you buy new stuff and it all turns out not to work.
Regards,
Rob Blankestijn

I am also getting a similar error, except mine is "Code:2,156,182"
If anyone is also getting these errors or if someone on Canon tech support could rectify this, I would really appreciate it.

Mtn Lion won't see CanoScan LiDE 90

10.8.2 won't see my CanoScan LiDE 90 scanner, which worked just fine via Preview until very recently (must be a recent sw update caused this?) I've installed new driver from Canon, but system doesn't recognize it's there -- not even in Apps. Any ideas? Thanks.

You might try the page below. You can ask Canon for help:
http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan _lide90#ServiceAndSupport

Upgrade from Mac OSX 10.4 to 10.5 + Canoscan Lide 30 Scanner + X11

I have just changed from PC to Mac (iBook G4). The iBook is already set up and workiing properly. Some questions for an inexperienced Mac user:
1. Is it worthwhile changing to OSX 10.5? Will the personal setting be automatically updated or will it led to the inevitable Microsoft crashes?
2. have downloaded drivers (*.dmg) for canoscan lide 30 and tried to install it. The scanner does not work. Which programmes do I need?
3. How/where do I get the latest version of the X11 software for OpenOffice? The downloads from the internet cannot be installed because of the new versions of OSX 10.4.
Thanks in advance for the help.
Kindest reagrds

1. Which iBook model do you have? You need a minimum of 867 mhz, 512MB of memory,
DVD drive for installation and 9GB of available disk space. Doing an upgrade should preserve your user settings. Is it worthwhile? Only you can answer that. Frankly I would stay with Tiger 10.4.11 with your machine.
2. You may need to take that up with Canon.
3.Note 10.4 customers can install X11 by using the Tiger DVD installer disk. See here:
http://overstimulate.com/articles/installing-x11-on-os-x-10-4-tiger

HT3669 Using/installing scanner Canoscan LIDE 50 with Mac OS 10.8.2

How can I use my canoscan lide 50 with my macbook pro retina (2012), which is running Mac OS 10.8.2?

It would appear that you cannot use this scanner on 10.8. Canon has not produced an ICA or TWAIN scanner driver. 10.8 does not list the LiDE 50 in its CanonIJScanner2 package. And VueScan states that to use it, you must first install the Canon TWAIN scanner driver. But the installer for this model was last written for 10.4 - meaning it requires support for PPC chipset which Apple ceased with 10.7.

Canoscan LiDE 80 not responding

Similar Messages

Maybe you are looking for