Canoscan scanner - N67OU - cant get to work!
I've been using this scanner for a few years without a problem with my old power mac but im having a few problems getting it to work with my macbook...
ive downloaded the 'canoscan toolbox x' but when i try and scan it just says "the scanner plug-in was not found"
im also having problems getting the 'link scanned image to' section to link up with photoshop like it did previously.. i go into applications and then photoshop but it wont let me link to the program itself...
help!
Did you ever get your Canon N670U to work on your Mac book? I bought a new iMac and I can't get it to work at all! I've tried reinstalling it, but it is missing a file. Could it be the Adober reader? It has the options of .jpg and .pdf grayed out like they aren't an option, although it won't let me scan it as a .gif, either.
Marcia Patrick
Similar Messages
-
i have an iphone 3G 16GB 4.2.1 - i moved back to canada and got telus mobile service. they cant get phone working because cellular data network tab/button is not on my phone. How do i get it on there
OK. T-Mobile is NOT owned by AT&T... yet... The deal hasn't gone through yet. T-Mobie's US network is not compatible with the iPhone. Lots of things don't work right. There is not, and never has been an unlocked 3G sold in the US. Don't know where the phone originated, but more than likely it was in the US. If that's the case, the phone has been hacked/jailbroken to get it to work.
Have you tried doing a restore or restoring the phone as new? I have to warn you, if you do so and the phone is hacked/jailbroken, it will re-lock to AT&T and will become unusalbe. I think your best bet right now might be to save yourself a lot of grief and just upgrade to new phone from a legitimate source.
I would never even consider buying an iPhone on ebay. 99% or more are hacked, jailbroken and/or stolen. -
Ghost 970 6gb mini display port to Asus pg278Q 144hz cant get to work
I am using a straight mini display port cable to display port no adapter and I can only get 120hz. It seems like it has to do with the fact the monitor is using the intel 4600 gpu instead of the 970m. Is there anyway around this? I changed the setting in nvidia control panel to use it all the time but does not help. Is there any setting I can do?
I cant get 144hz and therefore cannot get g-sync to work. I have searched these forums but cant seem to find a clear answer.Currently none of MSI laptops support G-Sync, only the dock for GS30 supports (because it's actually a desktop).
I heard MSI they are still working on this but not sure if current models can be patched to support G-Sync or only new models support. -
Hi,
Im quite new to Arch and so far everything work smoothly. Today I tried to get my Option GE0201 3G card working with umtsmon from aur. But sadly its not working although the card is recognized and I can send sms and see the signal strengh.
First problem: After program start umtsmon complains about some missing binaries (sorry for the german dialog) and clicking the "correct" button doesnt help, just results in a "umtsmon coudn"t find binary *su which is required for full operation" message. What binaries are missing here?
Second problem: Ignoring this complaint and trying to connect pppd gives me the following error
/usr/sbin/pppd: unrecognized option 'replacedefaultroute'
pppd version 2.4.4
Usage: /usr/sbin/pppd [ options ], where options are:
<device> Communicate over the named device
<speed> Set the baud rate to <speed>
<loc>:<rem> Set the local and/or remote interface IP
addresses. Either one may be omitted.
asyncmap <n> Set the desired async map to hex <n>
auth Require authentication from peer
connect <p> Invoke shell command <p> to set up the serial line
crtscts Use hardware RTS/CTS flow control
defaultroute Add default route through interface
file <f> Take options from file <f>
modem Use modem control lines
mru <n> Set MRU value to <n> for negotiation
See pppd(8) for more options.
pppd seems not to provide replacedefaultroute in Arch. Even when I turn of the replacedefaultroute option in the profile setting I still get the same error message. I jused cant get rid of replacedefaultroute...
Does anybody have an idea what going wrong here? With my previous Ubuntu installation and using umtsmin 0.8.9 I never ran across these kind of problems.
Cheers
FelixThe missing su binary is some kind of bug since all arch system has su, and on my systems umtsmon works fine after ignoring this one.
Arch's pppd built wouthout the replacedefaultroute patch, so that one will not work, and you have to enable the default route option. -
Cant get cluster working on different machines
Hi,I am using weblogic 5.1 with Service pack 9. I had the cluster up and running on one NT machine. Then I decided to expand it on another maching in the LAN. I created the same directory structure i.e mycluster and mycluster/server(ip address) in the 2nd machine. Cluster name and the multicast address also remaining the same. But on getting my server instances up on both the machines, I cant get it on one clusterNilesh
Are the two machines on the samesubnet, i don't know about WLS6.0 but in
WLS5.1, it is required that both these machines must be in the same subnet.
Hope this helps.
Ramesh
"Nilesh Shah" <[email protected]> wrote in message
news:3b3a50b4$[email protected]..
> Hi,I am using weblogic 5.1 with Service pack 9. I had the cluster up and
running on one NT machine. Then I decided to expand it on another maching in
the LAN. I created the same directory structure i.e mycluster and
mycluster/server(ip address) in the 2nd machine. Cluster name and the
multicast address also remaining the same. But on getting my server
instances up on both the machines, I cant get it on one clusterNilesh
-
Please help ?
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Kindle fire hd cant get to work.
While I think I downloaded flashplayer. When I click download box (after it says it's completed it says download is complete) it says unable to open file.
This is so frustrating!The latest Kindle Fire HD is not officially supported by Flash Player. Please see this page for a list of all certified devices:
Flash Player Certified Devices
That said, some users have been able to get Flash Player working on the Kindle Fire by using Dolphin, a third party browser.
How to install Adobe Flash on your Kindle Fire HD
Get Flash on Kindle Fire HD (video) -
[SOLVED]XBMC Alsa Nvidia HDMI cant get dmix working with plughw:1,
With 2.6.34 i'm able to get audio through my Asus (Nvidia chipset) GF210.
The issue is that in order to get audio in XBMC, i have to specify a custom audio device as plughw:1,7 and that seems to disable dmix -- ergo, no more two sounds at once (so no crossfade during music playback).
this is the only card description that works; it basically tells XBMC to output to the raw hardware directly on card 1 device 7 skipping all layers of abstraction (including dmix).
this method is only recommended for applications that will do all their own mixing (think jackd). so the behavior is to be expected.
some online docs say dmix will only work with the "default" device, others say it might work if i don't use the hw descriptor, but omitting the "hw" --> no sound at all.
the only other way i can get sound at all is to redefine pcm.!default as the plughw:1,7 device in /etc/asound.conf and then specify "default" in XBMC (this makes sense) but this still seems to mean no dmix.
obviously, resetting everything and using the normal VGA + Headphone-out mixes and crossfades just fine.
So, does anyone know:
* a way to get dmix going with a custom plughw card/device
* a way to tell XBMC to do the mixing on its own before sending the sound to plughw -- is this possible?
any help appreciated, it's more of a want than a need right now.
up to date 64bit, stock 2.6.34.1-1 kernel, and xbmc 9.11-17 if that matters.
Last edited by brisbin33 (2010-07-10 01:16:54)Getting dmix to run through a custom device is easy:
pcm.dmixer {
type dmix
ipc_key 2048
slave {
pcm "hw:1,7" # Always use pure hw. dmix will reformat/resample audio.
period_size 512 # If you get stuttering/or non-working audio, fiddle around with these
buffer_size 4096
rate 48000 # HDMI, I'll assume 48kHz
format S16_LE # Should be default for pretty much any soundcard.
bindings {
0 0
1 1
pcm.!default {
type plug
slave.pcm dmixer
Using this approach, everything will pass through dmix, which passes to hw:1,7.
Last edited by Themaister (2010-07-09 21:58:01) -
Cant get videos working on my other itunes
hi there hope someone can help,
I have 2 macs, a mini plugged into my TV and my G4 tower for everyday use, but as this has a larger hardrive i store all my tunes and videos on this and has my ipod syncd. I have recently installed tubesock to download utube vids and some i have bought off itunes but they are on my mac mini, when i copy them over to my other mac and try to put them on my ipod it says i cant.
can anyone help ??Your videos that you've downloaded or you made have another Format than iPod:-iPod,MPEG
-other,mp3(for example)
So you need to download on google an MPEG converter programm(easy to find).you convert your videos into MPEG and iTunes will accept the videos with the sound.lol -
PLSQL - fail, cant get it work. PLEASE HELP
This is the sql: I am basically trying to loop through every table in a users schema and write a line in a file for all the columns it has:
repheader off
set echo off
set feedback off
set trimout on
set trimspool on
set verify off
set serveroutput on format wrap
DECLARE
CURSOR table_cur IS SELECT DISTINCT table_name FROM dba_tab_cols WHERE owner = 'BATCH_AFTER' and not table_name like 'CB%' and not table_name like 'CE%' and not table_name like 'CF%'
and not table_name like 'CI%';
v_table VARCHAR2(100);
v_col VARCHAR2(100);
v_string VARCHAR2(32767);
file_name VARCHAR2(200);
out_file utl_file.file_type;
BEGIN
file_name := 'tables_to_check.txt';
out_file := utl_file.fopen('JOHAN',file_name, 'w');
v_string := 'select count(DISTINCT ';
FOR tab_rec IN table_cur
LOOP v_table := tab_rec.table_name;
EXIT WHEN table_cur%NOTFOUND;
DECLARE
CURSOR table_col_cur IS
SELECT DISTINCT a.column_name
FROM dba_tab_cols a
WHERE a.owner = 'BATCH_AFTER'
AND a.table_name = v_table
AND not a.column_name in ('O__EDN', 'O__KDN', 'O__EDX', 'O__KDX','O__KDXA', 'O__ST');
BEGIN
FOR tab_col_rec IN table_col_cur
LOOP
EXIT WHEN table_col_cur%NOTFOUND;
v_col := RTRIM(tab_col_rec.column_name, ' ');
v_string := v_string || v_col || '||' ;
END LOOP;
exception
when others then
DBMS_OUTPUT.put_line (v_table||v_col);
END;
v_string := RTRIM(v_string,'||');
v_string := v_string ||' from BATCH_AFTER.' ||v_table;
UTL_FILE.PUTF(out_file, v_string);
END LOOP;
UTL_FILE.FCLOSE(out_file);
exception
when others then
DBMS_OUTPUT.put_line (v_table||' ' ||v_col);
END;Hello
I have review your code and i have rewritte it so you do not need those variables anymore, I hope that it will works for you
repheader off
set echo off
set feedback off
set trimout on
set trimspool on
set verify off
set serveroutput on format wrapDECLARE
out_file UTL_FILE.file_type;
BEGIN
file_name := 'tables_to_check.txt';
out_file := UTL_FILE.fopen ('JOHAN', 'tables_to_check.txt', 'w');FOR tab_rec IN (SELECT DISTINCT table_name
FROM dba_tab_cols
WHERE owner = 'BATCH_AFTER'
AND NOT table_name LIKE 'CB%'
AND NOT table_name LIKE 'CE%'
AND NOT table_name LIKE 'CF%'
AND NOT table_name LIKE 'CI%')
LOOP
UTL_FILE.putf (out_file, 'select count(DISTINCT ');
FOR tab_col_rec IN (SELECT DISTINCT a.column_name
FROM dba_tab_cols a
WHERE a.owner = 'BATCH_AFTER'
AND a.table_name = tab_rec.table_name
AND NOT a.column_name IN
('O__EDN',
'O__KDN',
'O__EDX',
'O__KDX',
'O__KDXA',
'O__ST'
LOOP
UTL_FILE.put (out_file, RTRIM (tab_col_rec.column_name, ' ') || '||');
END LOOP;
UTL_FILE.put (out_file, ''''' from BATCH_AFTER.' || tab_rec.table_name);
UTL_FILE.new_line;
END LOOP;
UTL_FILE.fclose (out_file);
EXCEPTION
WHEN OTHERS
THEN
UTL_FILE.fclose (out_file);
DBMS_OUTPUT.put_line (SQLERRM);
END; -
Sick of this crap sound card cant get it working in
All it does is pop, fart, squeel, sound is completely knackered.
Sys:
AMD FX 55
2 GB RAM
A8N ALI
7900gtx
crap audigy zs platinum that gives me worse sound quality than software medium.a friend of mine, with an Audigy card tracked the problem to the Punkbuster; there a forums who discuss this issue
I own an X-FI Fatalty; from the latest di'ver update i've got problems with BF2, none prior to upate
A few days ago I've noticed that the "bug" was gone, maybe the PunkBuster folks tracked and solved the problem -
Trying to get connected to Oracle via tcp redirection, cant get it working.
Hi All
I have an oracle server behind a firewall, and i want to connect to it directly.. Let's say the Oracle is on 10.0.0.1 and I want to connect to it over internet. Machine has a public IP of 12.34.56.78 and an open port 80.
I have a software that will take any bytes sent to port 80, and send them to 1521, and same for reverse direction, so I run this on the box with oracle, and I can certainly TELNET 12.34.56.78 80 just fine.. And I can TNSPING it after I set this host and port in tnsnames
But it seems that oracle "knows" its IP address is 10.0.0.1 and when I connect a client to 12.34.56.78 port 80, the client is then seen (sniffing the network traffic) to immediately try connecting to 10.0.0.1 on some random port in 4000 range, as if oracle has told it "ok, now connect to me on 10.0.0.1 4000"
What is going on/how can I stop oracle behaving in this way?Charred,
Let's say you put the tns listener listening on the public IP and in port 1521, this is only the way in. On the way out the TNS process does a hand-shake between the user process connecting from the outside and the server process forked inside the machine to serve that session, but it comes out through a different port, in a random range.
What you need to do is to let the binaries of Oracle pass whatever they want through the firewall instead of opening ports. I'm assuming your firewall technology lets you do that.
Hope it helped.
LMC -
Help now please Cant make links work imported from PhotoShop6
I made slices in Photoshop6 which work when tested in Image ready but when I bring them into GoLive6 cant get to work? Saved as gif, psd, bmp?
>Dont see where to "copy" inthe save to web window.
Don't know what you mean by that. When it asks where you want to save the HTML and images, you can point it to a folder in your GoLive site. Otherwise, you could just save it wherever and copy whatever it exports into GoLive (or Dreamweaver) later. -
I have upgraded to OS X 10.9 and now I cannot connect to my Canoscan LIDE 90 Scanner. Cant find a new driver anywhere. Any ideas??
Like Dan White, I have found that I can still run the Lide 90 under Mavericks. As Dan says, the buttons on the front of the scanner don't work but I rarely if ever used them.
I have just tested the scanner using Acrobat Pro and it loads up the Scangear software to capture the scan, with no problems at all. I didn't have to reinstall anything as it was all there already and working in Mountain Lion. Photoshop CS 5.1 is different; it does not recognise the scanner, presumably because it can't find a TWAIN driver for it. Image Capture does not recognise the scanner either, but I don't have the latest (10.8) Canon MP Explorer and Explorer Opener software installed. -
My Macbook pro no longer outputs to my vizio led tv. It was working fine now I cant get any picture. It just says no signal. It is not the hdmi or the adapter because it works fine with my other tv. Any ideas on how to resolve this would be greatly appreciated. Please be as specific as possible. Thanks. BTW--I am using the mini dvi to hdmi adapter in case that was unclear.
Since you say that the same connectors work on your other TV is suggests that the fault is not in the connectors but your Vizio TV. I would check the settings on the Vizio TV. Verify that is is set to receive HDMI input. Perhaps you or some one else has inadvertently changed them. Pressing the wrong buttons on a remote control device can do that. (I am assuming no changes were made in SYSTEM PREFERENCES>DISPLAYS)
Ciao.
Maybe you are looking for
-
How do I get desktop ical calendars to appear in ICloud
I'm helping an office mate to get her new iphone, etc to work in concert. We've updated her desktop to Lion. Trying to get everything to synch. What a royal pain. I've been using Google Calendar and Contacts and Email for a year and a half with n
-
Check box in ALV - how to remove line selectors?
Hai All, I have to display sales orders in ALV grid. A check box shoud be displayed against each row. So if the user selects few sales orders & click on SAVE the data will be saved in custom table. The problem now is, I used the statement field_cat-E
-
HT4113 how can i enable my daughter ipod
My daughter friend hady daughter ipod touch 8GB set up a passcode which my daughter cant remember. Well now her ipod has been disabled which says connect to itunes please help me enable her ipod. She just got it Christmas. Also,my desktop is currentl
-
Add new line in ALV report on click of button...
Dear All, How to add a new line for input in ALV report at runtime, on click of a button. Waiting for early and favorable reply. Regards, Dharmesh Vyas
-
Program for activating transformations
Hi All, Can you plz tell me is there any standard program to activate transformations in BI. Thanks, Chella.