Cans or 5.1 setting in audigy

Of course,I'm confidentiality listening music thru cans but I was just wondering why sound quality will totally be better whenever I set up 5. speakers instead of cans setting.CMSS3D will always be enable in stereo surround and untweaked in audio effects.All views are highly appreciated.

No one else has experienced this problem?

Similar Messages

  • I can't save the setting for dowloads to go to the specified folder (such as the desktop). It restores to default when I close Forefox.

    I can't save the setting for downloads to go to the specified folder (such as the desktop). It works once but it restores to default next time I open Firefox.
    == This happened ==
    Every time Firefox opened

    Make sure that you not run Firefox in [[Private Browsing]] mode.
    In Private Browsing mode some menu items are disabled (grayed) and some features like visited links and others are disabled and not working.
    You are in Private Browsing mode if you see "Tools > Stop Private Browsing".
    See [[Private Browsing]] and http://kb.mozillazine.org/Issues_related_to_Private_Browsing
    See also http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]

  • Regarding receiving texts as emails:  Can you apply this setting to one individual? I want to continue to receive texts from everyone else except one person!

    Regarding receiving texts as emails:  Can you apply this setting to one individual? I want to continue to receive texts from everyone else except one person!

    Don't want to block the person, just have all his texts going directly to my email so that I can maintain a continuous record of his text contacts (rather than remain in text form).
    It appears that I must select an option that makes ALL texts go to email, which I'd prefer not doing.

  • How can i distinguish between set or tuples from incoming filters in a calculation

    How can i distinguish between set or tuples from incoming filters in a calculation. i am using descendants function with the leaves option to calculate some project revenue cause there is different calcuation method on sub projects the sum on the main project
    should reflect the sum of the sub project with all different methods.
    this works fine until i try to select 2 sub projects at the same time. i am getting the standard currentset dosnt work cause its a set.
    is there i way i can check if its a multiple select or not and handle it a different way

    Hi,
    Check the following link about Multi Select Calculations written by Mosha.
    http://sqlblog.com/blogs/mosha/archive/2007/01/13/multiselect-friendly-mdx-for-calculations-looking-at-current-coordinate.aspx
    Best regards...
    Chandima Lakmal Fonseka

  • How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

    How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

    Settings>General>AutoLock>Never. Now it will not sleep at all so change it back when you are done reading.

  • Can an iPad be set up for more than one user accounts?

    I have an Ipad wifi. i would like to let my son use it, but would like to set up a separate user account for him. Is this possible on an Ipad?

    No, an iPad is a single-user device, it can only have one set of apps and content on it

  • When I tap on the to line to add an address sometimes people's names come up that I don't have as contacts.  How can I change this setting?

    When I tap on the to line to add an address sometimes people's names come up that I don't have as contacts.  How can I change this setting?

    The only way that I know currently know of to remove old or incorrect email addresses from the Mail app is to reset the iPad back to factory defaults, which I assume that you don't want to to. You could try leaving feedback for Apple and maybe one day we'll day be able to edit them : http://www.apple.com/feedback/ipad.html#ipad

  • My main PC with my Itunes Library just crashed.  I still have all my music on Apple TV, Ipod Touch (Gen 2), and Iphone 4 (verizon).  How can I get everything set up on a new PC and working ?

    My main PC with my Itunes Library just crashed.  I still have all my music on Apple TV, Ipod Touch (Gen 2), and Iphone 4 (verizon).  How can I get everything set up on a new PC and working ?

    I downloaded Itunes 10.2 on new desktop, ran sync with my ipod touch (Gen 2) and have all my music on new PC.  Just can't get it to sync with my Apple TV (Gen1).  I have made music purchases on Apple TV and cannot get them to Ipod/Iphone?  Help

  • I no longer want to merge my work laptop with my icloud account on other devices.  How can I change the setting for the laptop?

    I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate.  How can I change the setting for the PC at work?

    Sign out of iCloud.

  • I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"?

    I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"? I have back up in the past but the last month I have not. I really want to keep the data.
    So how can I go in and change the setting, It stays ofcourse at the apple screen with wheel. All info is there and the computer works fine, just cannot use it or have been able to log in.

    wjosten is spot on.  If you really want iCloud, then you will need to acquire a new or second hand MBP that can run Lion.
    Ciao.

  • Can I hide the set time in the event boxes in Week View?

    Can I hide the set time in the event boxes in the Week View?

    David
    No way around this that I can find. That toolbar pops up if you pause the show.
    The nearest I could figure is to use the settings button for a long slide - 'Play each slide for 120 seconds' then tapping the arrows will move the slides along without showing the toolbar. And the 120 second slide is almost as good as a pause.
    iPhoto menu -> Provide iPhoto Feedback
    Regards
    TD

  • How can I do a set ?

    Hello people,
    How can I do a set ? like ... set = {1,2,3,4,5,6,7,8,9,10} I need to know that becouse in one of my programs there is a menu and the user can not choise another number .

    I don't want to give the impression of being a wise-crack - but um, that isn't a set, that's an array.
    Would this be a set containing only 2 items of value 1 and 2?
    int[] myStuff = {1,2,1,2,1,2}
    No, it would not, it would be a 6-element array containing duplicate values.
    A set can be created using the java.util.Set and related classes/interfaces.
    Depends on what you really meant.

  • Can Aperture not be set up to show a "Last Import" smart folder?

    I'm trying to make the transfer from using iPhoto to using Aperture.
    One thing I found really great in iPhoto was the smart folder that was simply set to show the last import, no matter when that import was done - whether it was today, yesterday or 6 months ago.
    The reason I found this so handy was because I set my iPad up in iTunes to only sync the photos from that Last Import smart folder, rather than all my photos.
    That way, every time I synced my iPad, I always had my most recent photos on my iPad, no matter when the pictures were taken.
    Now with Aperture, I cannot see a way to create anything similar. The best I can do is to create a smart folder with photos imported within the last month, let's say.
    But the problem with that is that if I haven't imported any new photos for over a month, then the next time I sync my iPad, then all my photos will no longer be on the iPad.
    If I create a longer timeframe, to let's say 3 months, then I might end up with way too many photos trying to sync across, and that's something I don't want. I could end up with hundreds and hundreds of photos, and I don't have the free space to be able to do this!
    When I used "Last Import" with iPhoto, then I always only had around 50 or 60 photos, because that's just generally how many I usually imported at any one time. Sometimes it was more, sometimes less, but the average worked for me.
    So to sum up: Can Aperture not be set up to show a "Last Import" smart folder, regardless of date?
    Or alternatively, is there any way I could "hack" or "trick" Aperture into doing something like this so that I always have a managable amount of the most recent photos on my iPad?

    Hello Brett,
    that does not seem to be an easy probem as you discovered.
    Some Workarounds:
    You might to use a smart album rule "Import session is" instead of a date range, but that will not be automatic.
    Create a folder "recently added" and keep your recent projects inside that folder; create a smart album at the top level of that folder; move older projects somewhere else.
    Or enable the Photo Stream - that is the current replacement for the "most recently added" album; it will (is supposed to) always show the most recent 1000 images.
    If you are familiar with AppleScript, you can make Aperture run an AppleScript on import (Import Settings) to add your imported image to an album of new images. From time to time remove the older images.
    Sorry, but no really convenient way to do it..
    Regards
    Léonie

  • How can I change the setting to one appropriate to java1.2

    Hello.
    I am using WebLogic 4.5.1 .
    and recently started to use JDK 1.2 instead of JDK 1.1.7.
    So, I set [start]-[weblogic]-[Choose1.2JRE] in environment.
    and then, if I execute T3Server, the message of
    "javai.dll class path cannot be found " is displayed and the server is not
    loaded.
    However, javai.dll was in java1.1.X\bin.
    I can assume that a setting is to java1.1.X.
    --> How can I change the setting to one appropriate to java 1.2
    It's my environment
    ClassPath
    .;c:\weblogic\classes;C:\weblogic\lib\weblogicaux.jar;C:\weblogic\license;c:
    \weblogic;C:\weblogic\myserver\clientclasses;C:\weblogic\myserver\serverclas
    ses;C:\weblogic\myserver\servletclasses;C:\weblogic\mssqlserver4\classes;c:\
    weblogic\classes\boot;C:\weblogic\eval\cloudscape\lib\cloudscape.jar;c:\rmi-
    iiop\lib\iioprt11.jar;c:\rmi-iiop\lib\iioprt.jar;c:\rmi-iiop\lib\rmiorb.jar;
    C:\jsdk2.1\runner.jar;C:\jsdk2.1\servlet.jar
    Path :
    %SystemRoot%\system32;C:\jdk1.3bin;c:\weblogic;c:\weblogic\bin;
    c:\;c:\bat;c:\util\;C:\jsdk2.0\bin
    Hyung Gi Min

  • How can i check my setting details are correct on my iPhone I recevied an error when sending a text this morning and while checking it out noticed my state and city are wrong

    How can i check my setting / about tab? This morning I got an error message say something wasn't safe (not sure what) I think it was my common name whcih is ch4iv.myvzw.com and while looking in there I noticed my state say NJ I live in PA, I did not buy my phone in NJ, the city says Bedminster I have never even been there. Can anyone advise?
    Can't I go on my Apple account and get to my setting / details.

    Here is the message...

Maybe you are looking for