CanSplitImage Rule causing pagination issues while creating RTF output

Hi,
We are facing spacing/pagination issues when we use CanSplitImage rule for RTF output with NoFrames. It splits the section and prints in next page as expected but leaves the remaining page empty/blank and prints the next consecutive sections in the next page(basically the 3rd page).
Any suggestions on the solution based on your experience will be highly appreciated.
Thanks!

Hi,
We are facing spacing/pagination issues when we use CanSplitImage rule for RTF output with NoFrames. It splits the section and prints in next page as expected but leaves the remaining page empty/blank and prints the next consecutive sections in the next page(basically the 3rd page).
Any suggestions on the solution based on your experience will be highly appreciated.
Thanks!

Similar Messages

  • AMS 4.0 errors out while creating RTF StatusCheckStep error: Package creati

    Hi All,
    OEM: 11g
    Oracle Apps:12.1.3
    O/S: AIX 6.1
    While creating rtf through AMS 4.0, we are getting the error message:
    Error while evaluating expression:[Error evaluating expression: ${FUNC_STATUS_CHECKER(${data.V_BUGNO})} : [StatusCheckStep error: Package creation request failed
    (Status:Completed Error - Initialization Failed).]]
    Could anyone please share the resolution to the above issue faced before!
    Thanks for your time!
    Regards,

    Hi,
    perhaps my help is still useful.
    On the end of the Customization Manager procedure you will find a status checker. The purpose of status checker is to review the individual steps and highlight the job/job step under trouble.
    In your case, one of the sub jobs, here "Package creation request failed" is erroring out. It can be that the AMP plug in is not completely configured, or requires a patch.
    You should run as first the diagnostic for Customization Manager, to see if the expected configuration is in place. You may also drill down to the individual step logs (within job details) to check if there are any further details.
    Regarding rft: usually you use rtf in combination with BI Publisher. If this is the case, please make sure that you have entered the right $Header$ string
    into the properties for your rtf. This is required to inform adpatch to which data source the rtf belongs to.
    Please let me know if this response is helpful for you.
    Kr, Volker

  • Issue while creating repair order via IW52

    Hi All,
             I am facing an issue while creating a repair order from Service Notification.
    In IW52 for service Notification , we have option of Create repair order in Action box of service notification, when i am clicking that i need to enter the sales order type.. when i am selecting standard order type KD01 or any other it is saying that
    1)Order type KD01 does not have the sales doc. identifier "repair"
    Message no. QM127
    Diagnosis
    You entered an order type that is not assigned to the sales document identifier "F" or "G" = repair order.
    Procedure
    Enter an order type that has the sales document identifier "F" or "G".
    Where can we see sales document identifier in config ?
    2. I would like know is there any setting where we can give default sales order type to service notification type ..
    regards
    giri

    Dear,
            Thanks for your inputs. It will be great help if you can let me know the below :
    1) Diff between Repair order, spare parts order..
    2)I happened to create a service order from a sales order following IDES Model for CS -4.6C / the service order type created is SM01 is created and my sales order type is OR .. now my question is there any setting where we assign Service order type to sales order type ???
    Note :- In OIOL Tcode for SM01 Order type i have IRC Sales order document type linked ..
    regards
    giri

  • Issues while creating a search project in BCC

    Hi There,
    Migrating the apps from 2007.3 to 10.0.3.Experiencing issues while creating a search project.
    Step #1.In Search Administration,navigating through Project > Global Settings & creating a Content Label named as "Catalog"
    Step #2.Navigating through Project > Create Production Project.Creating a project with Content Set as "CatalogSet"
    Step #3.Adding a Content with this info:
              Content Name: Catalog
              Type of Content : ATG Repository
              IndexingOutputConfig Path : /atg/commerce/search/ProductCatalogOutputConfig
              Host name : localhost
              RMI : 10160 ( RMI port of commerce instance)
         Creating a content & getting the message as New Content "CatalogTest" has been created.
         Issue #1: Content is not displaying in the Content eventhough content has been created successfully.
         Issue #2: Getting error for "Default Text Processing Options"
         You can refer these issues in the attached screenshot "Content-Page-with-error.jpg"
    Step #4.Creating a new TPO as "English" & trying to "Associate Search Project" & getting an error.Refer the attached error log "Associate-Search-Project.log"
    Due to these issues, "Build Index" button is disabled.Did anybody experienced these issues? Any help/comments are appreciated.
    Also attached the full server logs as commerce-server.log & publishing-server.log.
    Since no options for attachment in this forum, I posted the attachment in this link.Please refer it.
    https://groups.google.com/forum/?fromgroups#!topic/atg_tech/csEHi-x3Nyc
    Thanks in advance!
    Mani
    Edited by: user11263665 on Apr 25, 2012 10:38 PM

    We faced the same problem when migrating from 2007 to ATG 10.0.3. The reason this error comes up is because the Search depends on a local customization adapter /atg/searchadmin/adapter/customization/LocalCustomizationDataAdapter which adds English as a language in the text processing options.
    After the migration you need to import the initial ATG search related data into your Search schema. These instructions have been mentioned in the ATG install guide. Here is the extract from the docs.
    Note: The import scripts import data using startSQLRepository. Make sure your JTDataSource and
    FakeXADatasource are configured to permit this in home/localconfig. JTDataSource should automatically
    point to FakeXADataSource. FakeXADataSource should point to the administration database, and
    FaxeXADataSource_production should point to the production database. Note that some product
    installation processes, including Oracle ATG Web Knowledge Manager Self Service, need FakeXADataSource
    pointed at the production database, so you may need to change the FakeXADataSource between installations.
    once you are done with the configurations above, import only the searchadmindata xml into search schema as this imports the LocalCustomizationDataAdapter config information into your search schema. Once this is done, you should be good to index.
    <ATG10dir>\home\bin\startSQLRepository.bat|sh -m SearchAdmin.AdminUI
    -repository /atg/searchadmin/SearchAdminRepository -import
    <ATG10dir>\Search10.1\SearchAdmin\common\data\initial\searchadmindata.
    xml

  • Issue while creating a new web part page (Safeunit.aspx) within a folder located under a Document Library.

    Hi, I am facing an issue while creating a new web part page (Safeunit.aspx) within a folder (Safematic Seal Support Systems) located under a Document Library (Product Information Documents).
    The path I am explaining:
    Going to the Document Library (Product Information Documents) --> now inside that, clicking on a folder (Wet Seal Support
    Systems) --> now inside the folder clicking on another sub-folder (Safematic Seal Support Systems) --> Here I want the web page Safeunit.aspx
    Issue is that when I reach to the required destination, and want to create the web page by clicking on 'Site Action' --> 'Create' --> 'Web Part Page', now while selecting the Document Library name from the drop-down list, I do use 'Product
    Information Documents' since the folder is inside this library only; but that create the page directly under the 'Product Information Documents' library, not under the sub-folder (Safematic Seal
    Support Systems).
    FYI, it is SP2007 version.
    Kindly assist in this. Thanks in advance.

    I see that you have the namespaces reference in your code.
    I think you have changed the NameSpace name of your code to CreateSPFolder, change the reference in all your manifest, and other files to point to the current namespace name. It should help.
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • Issue while creating PO

    Hi Folks,
    I have an issue while creating a purchase order for some inventory items (not all items).
    System is populating a Note "**A new part number already exists**".
    Of course, it is not stopping to save and approve the PO, but still this note is interrupting the users a lot, when they are in rush to create no of PO's.
    So, could any expert help me in this issue that how to avoid this note, please?
    Thanks in advance.

    I bet you have a customization/personalization on the po screen that looks at the item, checks if it is obsolete/superceded and displays a message to the user.
    Hope this helps
    Sandeep Gandhi

  • WHAT ALL MESSAGE'S ISSUED WHILE CREATING PO

    Sir,
    ply let me know after saving the po i want to know what all messages were issued while creating the po.
    Like "warning" or "information" message
    where  can i see this
    regards
    amey

    Hi,
    PAth- Spro-MM-Purchasing-Environment Data-Define Attributes of System Messages...
    Here are few message type:
    Contract has different purchasing organization &     W
    Validity period of contract does not start until &     W
    Validity period of contract expired on &     W
    Target value of contract & exceeded by & &     W
    Net price for item & taken from conditions     W
    Purchase requisition & item & already deleted     W
    Scheduled quantity & & greater than target quantity & &     W
    Quantity smaller than invoiced quantity &     W
    Target quantity exceeded by  & &     W
    Not possible to determine a consumption account     W
    Release date lies in the past     W
    Base unit of measure & adopted from material master record
    Release date: next workday is &     W
    Contract target value & reached     W
    Please only use plants with company code &
    Order unit copied from material master record     W
    Hope it helps.
    Utsav..

  • Issue while creating connection pool in weblogic using SERVICE NAME

    Found two issues while creating connection pool in weblogic using SERVICE NAME
    1. While running apps from jdeveloper using xxx-jdbc.xml
    weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Io exception: The Network Adapter could not establish the connection
         at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
         at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:214)
         at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1051)
    2. Configuriing the jndi in Weblogic server
    weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Listener refused the connection with the following error:
    ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
    The Connection descriptor used by the client was:
    localhost:1521:SERVICENAME
         at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
    Problem
    database url is generated based on SID
    eg: jdbc:oracle:thin:@localhost:1521:SID
    Solution
    (generate seperate url for SERVICE NAME)
    jdbc:oracle:thin:@localhost:1521/SERVICENAME
    ------------------------

    It is so clear: host not found error for network connection and the other SID servcie name not found means your oracle instance name is not up. check with srvctl status for given servcie name or node, else check CRS_Stat -t if you are using RAC.

  • Issue while Creating the records in OAF by disabling one field.

    Hi Experts,
    I am having the scenario like this.
    From the OAF page I want to create the record by omitting one field(it is disable for OAF).
    Consider the folowing scenario..
    I am having the following fields Empno,Empname,Salary,Job in the OAF page where I made the Job field alone as disable and the style i am using for job field is message text input and i have set the initial value as 'Manger'.
    I am facing issue while creating the records in OAF page without the job filed value ie 'Manager' then the records were not inserted into my tables. Whereas if I enable the job field in OAF page(meaning I gave the job as 'Manager' in OAF page) I am able to create the records from OAF page and able get inserted in the database.
    Could Anyone can suggest where I fail as it is my Priority issue.
    Any Suggestion will be a great help for me.
    Thanks,
    Murugesh.

    or you can default it in the controller by handling add row event
    if(vo.hasNext())
    vorow = vo.next();
    vorow.setAttribute("xxxx",3838);
    --Prasanna                                                                                                                                                                                                                                                                                                                                   

  • Issues while creating implementation for BADI  "ME_PROCESS_PO_CUST"

    Hi Group,
    I have issues while creating implementation for  BADI "ME_PROCESS_PO_CUST".
    I tried to create implementation for the above mentioned BADI but, I was getting an error like this:
    "Interface implementation IF_EX_ME_PROCESS_PO_CUST does not exist".
    I want to implement this BADI and so, ideas/views at the earliest will be appreciated.
    Please let me know how to overcome this error.
    Thanks,
    Vishnu.

    Hi,
    Have you activated the class which is implementing the interface? (in transaction SE19 you should see class name)
    Best regards,
    Wojciech

  • Partner function issues while creating SA using LSMW

    Hi,
    I am opening a new thread (though similar question has been put by Vihaan in below thread)
    Tax code in SA - LSMW
    We are creating SAs via LSMW IDOC method (Message Type - PURSAG_CREATE and Basic Type - PURSAG_CREATE01), all our SAs being created w r to Contract and Contract has multiple OA and PI partner functions. So while creating SA we are passing unique OA and PI value (from list of valid OA/PI avaialble in contract) in LSMW structures - E1BPMEOUTPARTNER and E1BPMEOUTPARTNERX.
    Values passed are mentioned below:
    E1BPMEOUTPARTNER               Partner Information for Outline Agreement
        Fields
            PARTN_ROLE                   Partner Function
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNER-PARTN_ROLE = 'BA'.
            PLANT                        Plant
            SUBRANGE_TX                  Description of Vendor Subrange
            LANGU                        Language Key
            LANGU_ISO                    Language according to ISO 639
            PARTNR                       Reference to other vendor
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNER-PARTNR = '1XXXXXXXX9'.
            DEF_PARTNR                   Default Partner
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNER-DEF_PARTNR = 'X'.
            DELETE_IND                   Deletion Indicator in Purchasing Document
    E1BPMEOUTPARTNERX              Change Parameter Partner Data (Outline Agreement)
        Fields
            PARTN_ROLE                   Partner Function
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNERX-PARTN_ROLE = 'BA'.
            PLANT                        Plant
            SUBRANGE_TX                  Description of Vendor Subrange
            LANGU                        Updated information in related user data field
            LANGU_ISO                    Updated information in related user data field
            PARTNR                       Updated information in related user data field
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNERX-PARTNR = 'X'.
            DEF_PARTNR                   Updated information in related user data field
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNERX-DEF_PARTNR = 'X'.
            DELETE_IND                   Updated information in related user data field
    Now issue is SAP is not recognizing above mentioned partner value and throwing error as Following mandatory roles missing in partner maintenance: OA
    If the reffered contract has single OA and PI LSMW is running fine and creating SA successfully but issue is coming only when we have multiple OA/PI.
    Has anybody faced similar issue or aware if any OSS note which resolves this issue, please advise.
    Thanks,
    Yogesh

    Hi Jurgen,
    I have created a separate source structure for passing partner function and now have below source structure:
    Source Structures
           HEADER_SA            Header Structure
               PARTNER_SA          PARTNER STRUCTURE (Lower level to Header)
               ITEM_SA              Item Structure (Lower level to Header but at the same level as Partner)
    Then created a separate file for partner having both OA and PI value as shown below (ID is common field between all three structures Header, item and Partner):
    ID     PARVW     LIFN2     DEFPA
    1     BA     1XXXXXXX9     X
    1     RS     1XXXXXXX7     X
    Now after convert data step it considers above values for partner role but still LSMW fails with same error "Mandatory PF missing, OA, PI"
    Also, one more info wanted to share- if in my contract I put a tick mark against one of the partner OA/PI in DEFAULT BOX, it works fine but that does not make any sense as the whole pupose of having multiple OA/PI is to give option to business of selecting one of the avaialble OA/PI.
    FYI - I have opened a customer message to SAP, let see what they suggest.
    Thanks,
    Yogesh

  • Business Rule calc manager issue while executing through Planning Smartview

    Hi,
    I am working on Hyperion Planning 11.1.2 and I have created few business rule in Calc manager. When user is opening it through Hyperion Planning webforms its working fine.
    I have attached the rules on webform and they run on Save and use member on data form and Hide prompts.
    All these properties are checked. So user enter the number on Planning webform and hit on save rule will cruch on the POV members.
    Please help me on below 2 issues:
    1.When user is using the Smartview Planning and opening webform in Smartview while exceuting the rule its throwing error. Can't run the rule.
    What is the exact provsiong I need to give so that they can execute it from the Hyperion Smartview Planning also.
    Currently HBRAPP is Interactive user
    and Application level is Interactive user and Essbase write access
    If I am giving Administrator access they are bale to run the rule, I can't give Administartor acess.
    2.While running rule even with admin access its not taking the POV, its taking the default mebers which I have given while creating the variables.
    However from Planning web it takes the POV selection of webform,
    Please suggest why the same thing is not happening from Hyperion Smartview.
    Thanks in advance
    Pankaj

    Please advise on this issue. Any help would be highly appreciated.

  • Issue while creating a new application in Hypeiron Planning

    Hi,
    When I am trying to create a new application in Hyperion Planning - the below log is coming...
    Planning server started fine in 4328 ms ( as shown in the below log) but once I click the finish button to create the new application its then I am facing with the issue and the same error is repeating in the Planning server..
    but I could see the new application in EAS console - but when I cannot see the application in workspace or planning web..
    When I restart the planning server - the same error is repeating - but when I delete the application from EAS and then RECONFIGURE Planning(database, instance and datasouce of planning )in shared services and restart the planning server the error is going of (most probably because all the old tables are being dropped in the database)
    Please help me resolve the issue.
    Planning server Log:
    Mar 31, 2008 3:40:24 PM org.apache.coyote.http11.Http11Protocol init
    INFO: Initializing Coyote HTTP/1.1 on http-8300
    Mar 31, 2008 3:40:24 PM org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 766 ms
    Mar 31, 2008 3:40:24 PM org.apache.catalina.core.StandardService start
    INFO: Starting service Catalina
    Mar 31, 2008 3:40:24 PM org.apache.catalina.core.StandardEngine start
    INFO: Starting Servlet Engine: Apache Tomcat/5.0.28
    Mar 31, 2008 3:40:25 PM org.apache.catalina.core.StandardHost start
    INFO: XML validation disabled
    Mar 31, 2008 3:40:25 PM org.apache.catalina.core.StandardHost getDeployer
    INFO: Create Host deployer for direct deployment ( non-jmx )
    Mar 31, 2008 3:40:25 PM org.apache.catalina.core.StandardHostDeployer install
    INFO: Installing web application at context path /HyperionPlanning from URL file
    :G:\Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning
    Creating rebind thread to RMI
    Mar 31, 2008 3:40:29 PM org.apache.coyote.http11.Http11Protocol start
    INFO: Starting Coyote HTTP/1.1 on http-8300
    Mar 31, 2008 3:40:29 PM org.apache.jk.common.ChannelSocket init
    INFO: JK2: ajp13 listening on /0.0.0.0:8302
    Mar 31, 2008 3:40:29 PM org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/31 config=null
    Mar 31, 2008 3:40:29 PM org.apache.catalina.startup.Catalina start
    INFO: Server startup in 4328 ms
    [INFO] AuthChallengeProcessor - basic authentication scheme selected
    [INFO] AuthChallengeProcessor - basic authentication scheme selected
    Setting Arbor path to: G:\Hyperion\common\EssbaseRTC\9.3.1
    [INFO] AuthChallengeProcessor - basic authentication scheme selected
    [INFO] AuthChallengeProcessor - basic authentication scheme selected
    [INFO] AuthChallengeProcessor - basic authentication scheme selected
    [INFO] AuthChallengeProcessor - basic authentication scheme selected
    Connection to the datasource created successfully.
    Query Failed: SQL_SYSDB_DELETE_EXPIRED_EXTERNAL_ACTIONS:[100]
    java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00942: table or
    view does not exist
    at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
    at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
    at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
    at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
    at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source
    at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source
    at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
    at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Error encountered with Database connection, recreating connections.
    Nested Exception: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]O
    RA-00942: table or view does not exist
    Query Failed: SQL_SYSDB_DELETE_EXPIRED_EXTERNAL_ACTIONS:[100]
    java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00942: table or
    view does not exist
    at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
    at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
    at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
    at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
    at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source
    at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source
    at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
    at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Error encountered with Database connection, recreating connections.
    Nested Exception: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]O
    RA-00942: table or view does not exist
    Query Failed: SQL_SYSDB_DELETE_EXPIRED_EXTERNAL_ACTIONS:[100]
    java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsis
    tent datatypes: expected INTERVAL got NUMBER
    at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
    at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
    at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
    at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
    at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source
    at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source
    at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
    at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Error encountered with Database connection, recreating connections.
    Nested Exception: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]O
    RA-00932: inconsistent datatypes: expected INTERVAL got NUMBER
    software details:
    EAS server is up and working fine
    Hyperion planning 9.3.1
    Oracle database 9.2.0.1.0
    Regards,
    Ravi

    Now we have a new schema in place WITH a new username and password for oldb database-
    this is the change in the datasouce configuration (USER NAME CHANGE)
    Datasource name: newplan
    Select Database: Oracle
    Database details:
    Sever: my database server ( say 10.301.222.320)
    Port:1521
    Product: PLANNING
    database: oldb
    username:HYPPLAN
    password:***
    when I use the above configuration: below is the error log
    Apr 1, 2008 11:39:49 AM org.apache.coyote.http11.Http11Protocol init
    INFO: Initializing Coyote HTTP/1.1 on http-8300
    Apr 1, 2008 11:39:49 AM org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 750 ms
    Apr 1, 2008 11:39:49 AM org.apache.catalina.core.StandardService start
    INFO: Starting service Catalina
    Apr 1, 2008 11:39:49 AM org.apache.catalina.core.StandardEngine start
    INFO: Starting Servlet Engine: Apache Tomcat/5.0.28
    Apr 1, 2008 11:39:49 AM org.apache.catalina.core.StandardHost start
    INFO: XML validation disabled
    Apr 1, 2008 11:39:49 AM org.apache.catalina.core.StandardHost getDeployer
    INFO: Create Host deployer for direct deployment ( non-jmx )
    Apr 1, 2008 11:39:49 AM org.apache.catalina.core.StandardHostDeployer install
    INFO: Installing web application at context path /HyperionPlanning from URL file
    :G:\Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning
    Creating rebind thread to RMI
    Apr 1, 2008 11:39:53 AM org.apache.coyote.http11.Http11Protocol start
    INFO: Starting Coyote HTTP/1.1 on http-8300
    Apr 1, 2008 11:39:53 AM org.apache.jk.common.ChannelSocket init
    INFO: JK2: ajp13 listening on /0.0.0.0:8302
    Apr 1, 2008 11:39:53 AM org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/16 config=null
    Apr 1, 2008 11:39:53 AM org.apache.catalina.startup.Catalina start
    INFO: Server startup in 4656 ms
    [INFO] AuthChallengeProcessor - basic authentication scheme selected
    [INFO] AuthChallengeProcessor - basic authentication scheme selected
    Setting Arbor path to: G:\Hyperion\common\EssbaseRTC\9.3.1
    Connection to the datasource created successfully.
    Error log starts here--------------------------------------
    in cpp-Created Application:planone 0
    Unable to create Analytical application. Exiting Application Creation.
    Exception in Application Creation :Unable to create Analytical application. Exit
    ing Application Creation.
    java.lang.IllegalStateException: Unable to create Analytical application. Exitin
    g Application Creation.
    at com.hyperion.planning.HspManageApplication.createApp(Unknown Source)
    at com.hyperion.planning.appdeploy.HspManageAppSession.createApplication
    (Unknown Source)
    at HspCreateApp.Handle(Unknown Source)
    at HspCreateApp.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
    icationFilterChain.java:237)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
    ilterChain.java:157)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
    alve.java:214)
    at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
    eContext.java:104)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:520)
    at org.apache.catalina.core.StandardContextValve.invokeInternal(Standard
    ContextValve.java:198)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
    alve.java:152)
    at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
    eContext.java:104)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:520)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
    ava:137)
    at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
    eContext.java:104)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
    ava:118)
    at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
    eContext.java:102)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:520)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
    ve.java:109)
    at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
    eContext.java:104)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:520)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
    at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:16
    0)
    at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:300)
    at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
    at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
    at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.ja
    va:675)
    at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
    ool.java:683)
    at java.lang.Thread.run(Unknown Source)
    java.lang.RuntimeException: Create application failed.
    at com.hyperion.planning.appdeploy.HspManageAppSession.createApplication
    (Unknown Source)
    at HspCreateApp.Handle(Unknown Source)
    at HspCreateApp.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
    icationFilterChain.java:237)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
    ilterChain.java:157)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
    alve.java:214)
    at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
    eContext.java:104)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:520)
    at org.apache.catalina.core.StandardContextValve.invokeInternal(Standard
    ContextValve.java:198)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
    alve.java:152)
    at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
    eContext.java:104)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:520)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
    ava:137)
    at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
    eContext.java:104)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
    ava:118)
    at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
    eContext.java:102)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:520)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
    ve.java:109)
    at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
    eContext.java:104)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
    a:520)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
    at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:16
    0)
    at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:300)
    at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
    at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
    at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.ja
    va:675)
    at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
    ool.java:683)
    at java.lang.Thread.run(Unknown Source)
    the error I am getting in appwizard - "error occured while creating application - please check the log"
    and if I am using the same schema - i.e. same userid and database for both planning system and planning application I was getting the previous error
    Regards,
    Ravi

  • Ibase/Component issue while creating a message from satillite system

    Hi experts,
    we have implemented the service desk functionality in solution manager system.
    User is able to create message in solution manager directly.
    While creating message from a satellite system IBASE/component fields are filled with incorrect values.
    Because of this user unable to create message from satillite system.
    Has someone any ideas where we do some settings to get correct Ibase/Component values while creating message from satillite system?
    Thank you in advance,
    Babu

    Hi  Babu,
    For Creating messages in SOLMAN make sure that in T code SM30  under the table BCOS_CUST data is maitained
    OSS_MSG     W     NONE     CUST620     1.0
    First your should make your solman ready for posting issues within.
    Then connect it to ECC systems and try posting issues there.
    Do not user Tcode NOTIF_CREATE for posting issues  always use HELP- Create Support message.
    Thanks
    Nand

  • Issue while creating Virtual provider based on HANA Model in SAP BI

    Dear Experts,
    I try to create a Virtual Provider based on HANA Model. However receive below error "Unable to find SAP HANA information model".
    I tried to assign the appropriate package and HANA model while creation of Virtual provider in SAP BI using RSA1 Transaction.
    Do I need to enable any services/ settings, so that I can able to use HANA Models in SAP BI?
    Do I required any specific authorizations either from BI or HANA side?
    Could some one kindly help to resolve this issue.
    Thanks,
    Khader

    Hi Srinivasan,
    Thank you for your response.
    I have already gone through the content provided via above links.
    However I face issue while activating the virutual provider with warning message"Unable to find SAP HANA information model". Due to which I am not able to see any data from Virtual Provider in BW.
    Do we need to have any special access/ role in BW or HANA system in order to consume HANA models in BW (Vitual Provider in this case)?
    I am trying to consume HANA Models in BW for the first time.
    So any more clues can be helpful.
    Thanks,
    Khader

Maybe you are looking for

  • How can I call an ".asp" from a Servlet?

    I want to make a call to an asp page from my servlet. If i use the conventional way of doing it as follows: RequestDispatcher rd = getServletContext().getRequestDispatcher("http://localhost:8080/abc.asp"); rd.forward(request, response) It gives me Il

  • What's wrong with my laptop?

    Every time I try to watch a video, play a game on Facebook, load my iTunes, or load a radio station on my HP laptop it freezes the program I am in and I have to close out of it. I have tried shutting it down, restarting it, and instaling updates and

  • All dx.doi links do not work on new Macbook

    I recently got a new Macbook Pro, and it generally works alright. It has OSX 10.9.  However, whenever I try to go to a website that uses dx.doi (common for scientific papers, for example), the link doesn't load, and I get a 'no data received' message

  • Is it possible to play back an After Effects composition in slow motion? (CS6)

    Hi, I'd like to play back the composition in slow motion so I can make sure the animations are smooth. I find that sometimes you see gaps in your animation when you play it back frame by frame but you only just notice that something might be off when

  • Transfering from Win8 to another Win8 machine

    I've been trying to transfer from my old PC to my new one with Easy Transfer. It works fine with my new one, but with my old one it only will ask me if I've already saved my files, as if my old PC is the one I'm transferring to. My old PC was a windo