Cant accept incoming calls

Just bought an iphone 3g from a friend and I am currently on a pay as you go contract. Anyone who tries to contact me gets an engaged tone, I have altered the sim card threetimes with O2 to no avail. Please can anyone advise or help
Awaiting in anticipation
Graham

Follow the directions here to restore it:
http://support.apple.com/kb/ht1212
This will remove the passcode.

Similar Messages

Can accept incoming calls but cannot make outgoing...

So I've been in this one skype group for a few months, and everything's been fine up until this point. What's happening is that I try to call the group, which I've never had a problem doing, but it just keeps calling and calling and no one receives it. I can't end the call either, I have to wait until it finishes "trying" to call. I can receive incoming calls with no problem though.
I've also been having a small problem every now and then where I lag out of a call, and I know this has nothing to do with my internet because everything else is working perfectly fine.
I have Windows 7, do not have the latest version of skype because I don't like it at all... And I know that can't be the problem because the older skype's been working fine for years. I'm not sure what could be causing this problem now, but if anyone could suggest something I can do to fix it (without updating skype), I'd be really grateful.

Posted: Nov 25, 2010 5:17 PM
If your facetime does not work and you don't see the facetime button when you try to initiate a call try texting yourself. Sometimes your phone company has deactivated your text messaging when you hook up your new Iphone 4. Phone them and get it reactivated and it will work. You need three things to activate facetime. 1. Cell phone service (naturally) 2. connection to a router (wifi) and 3. text messaging that works. A text message is sent to complete the connection.
Have a great day and enjoy facetime.
Wayne Howkins

Cant accept incoming video calls

each time someone video calls me when I'm on my desk top, it won't let me accept. it shows up for a second then says i missed a call. any suggestions?

Hi,
I see that I missed the important bit about it being "accept triggered Remotely" rather than Auto Accept.
I know just enough AppleScript to create Away Messages on Accept and set Available on Chat end.
Accept
using terms from application "iChat"
on av chat started
set status to away
set status message to "In Conference . . ."
end av chat started
end using terms from
Chat Ended
using terms from application "iChat"
on av chat ended
set status to available
set status message to "I was Busy but Now I am Not"
end av chat ended
end using terms from
As to taking the response/input from a Remote device and linking that with an "Accept" instruction in iChat is a bit beyond me.
However there is a Forum here in Apple Discussions that deals with AppleScript Here
The Full path to that forum is this Apple.com > Support > Discussions > Mac OS X Technologies > AppleScript (Where it reads "Discussions in the Index Page).
7:51 PM Wednesday; November 17, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Iam a new user of iphone..When the screen is on lock, you cant hear incoming calls or messages..Is there away when locked you can still hear your phone when a call or message comes in?

Iam a new user of the iphone 4s. When the screen is locked, its on silence.How can you change that so when it's on lock, you still can hear if a call or message
is coming in? I cant always be looking at my screen, so it would be nice if I can hear it

What do you mean "out of warranty"? Warranty is for a year right? Or am I out of warranty because the phone cracked? I'm a noob...
I'm still covered I think. I got the phone in December.

Ebay App update on 3GS UK stops incoming calls

Hi,
I thought i'd post my findings.
I had an Ebay App update 2 days ago and without realising a connection with the update my 3GS started going a bit haywire.
This maybe a one off bug with the update and my personal setting on my phone.
The first problem i noticed was the battery level started to be eratic (50% to 20% then 40%)
Next day after full charge my phone lasted about 4-5 hrs before totally flat with no calls being made. (i thought it just didn't charge properly over night)
Later on that night i re-charged it and since then the phone is running pretty warm. (could be another fault and nothing to do with the App)
The next problem was i found out it would not receive calls (everything else working normally even outgoing calls apart from running warm)
After exhausting the net on iphone forums i finally went into itunes and clicked restore. After about 15-20 mins it was restored to factory.
The iphone was working perfectly and running cold again so i decided to sync back so i was back to where i was before restoring (all contacts and apps etc)
To my horror the phone would not receive calls (straight to voice mail) with this in mind i knew it was something i had loaded on to the phone.
Realising that the Ebay App was the last thing i put on, so i decided to delete the App and the phone works perfectly again. Reload Ebay app with update and it stops incoming calls again!
How can an Ebay App or any other App stop your phone from doing the basic thing like accepting incoming calls.
Like i said this might be freak happening with my phone and the combination of things i have on my phone but be aware that this can happen.
My 3GS is only 3 weeks old and is factory unlocked and its on Orange network.
Hope this helps somebody out there, but i was worried that my 3GS had turned into a £500 ipod
Message was edited by: slipdog
Message was edited by: slipdog
Message was edited by: slipdog

Before I came to the conclusion that the eBay app is the problem, I disabled all the connections (WiFi, Bluetooth and 3G), then I reset the network settings that didn't change anything. I was about to erase everything on my phone just before I read this page and thank Goodness! The moment the eBay app was gone everything went smooth. I still get calls when the WiFi is on and even though it uses the battery it doesn't drain it like when the eBay app is installed. I reinstalled the eBay app and all the problems went back... I took it off, everything went back to normal. Now I just go to eBay.com instead of using the app.

Cant reply to incoming call with text while on phone

Before IOS7 I could reply to an incoming call while on a call with a text " Cant talk right now I will call you later". With IOS7 that is not an option. I spoke with Apple tech support they said it was a Verizon issue. That Verizon has to update their system to be compatible with the update. I spoke with people who have iphone 5's with AT&T and Sprint and the have the same issue. This was a really nice feature and I wish it was someway to get it back. Can somebody help

I am not happy that they removed this feature either. Unfortunately, Apple seems to be changing many things for the worse since Steve Jobs is gone. User friendliness was a big priority to him, and this being one of those and also being efficient and possibly safer in the case that you may be on the phone and driving. You could, with one touch, let your second caller know that you were busy or you would call them back...this is not one of Apple's best decisions by far

Is it possible to accept an incomming call automatically?

I am using my iPhone 4 or 5 while driving a car. Is it possible to accept an incomming call automatically?

No

I cant find the end button when i receive a incomming call please help me. Is there any solution for it or is it a bug in the ios7.0.3 iam updated with ios7.0.3

I cant find the end button when i receive a incomming call please help me. Is there any solution for it or is it a bug in the ios7.0.3 iam updated with ios7.0.3

Do you mean decline button before picking up the call?

HT1414 i restored my iphone now i cant accept calls or call out whats the problem?

i restored my iphone now i cant accept calls or call out whats the problem?

Hey retrothakid,
Thanks for the question. I understand that you are experiencing issues with your iPhone 4s. The following resource may provide a solution:
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
Thanks,
Matt M.

When I accept a incoming call face time says connecting but it cannot connect. Pls help me.

when I accept a incoming call face time says connecting but it cannot connect. Pls help me.

A slow Internet connection in between both parties is a typical reason for the connection taking "forever".

My iphone 5C touch wont works some times , mostly during incoming call i cant take the call or some times password inputs wont works.

My iphone 5C touch wont works some times , mostly during incoming call i cant take the call or some times password inputs wont works.

Greetings naseem770,
It sounds as if you are having an intermittent issue with touchscreen response on your iPhone. I would suggest that you troubleshoot using the steps in this article -
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

SIP Trunk not accepting inbound calls

I have a CME setup using Engin as a SIP provider
I am able to dial out with no issue, however my inbound calls do not work, they divert to the Engin voicemail
My SIP registration is OK and the number is configured as the primary DN on one of my phones
Router#sh sip-ua register status
Line                             peer       expires(sec) registered P-Associ-URI
================================ ========== ============ ========== ============
038682XXXX                       -1         1124         yes
101                              20001      45           no
102                              20003      18           no
103                              20005      45           no
104                              20006      45           no
I do see the call come in if I debug the dial peer, but it only seems to match an outgoing dp
I am seeing a couple of disconnect cause codes that I cant seem to find any relavent information on in the CCSIP debugs
Router#
Sep 8 18:15:15.009: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SESSION_REFRESH_REQ
Sep 8 18:15:15.009: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: dir:2, method:102, resp_code:0, container:4F947560
Sep 8 18:15:15.009: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLPrintTDContainer: Peer-Event: E_STSL_PASS_ST_PARAMS, SE Value:1800, SE Refresher:uas, Min-SE Value:1800, flags:2001
Sep 8 18:15:15.017: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SESSION_REFRESH_RESP
Sep 8 18:15:15.017: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: dir:1, method:102, resp_code:100, container:4F947DF8
Sep 8 18:15:15.025: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_DISCONNECT
Sep 8 18:15:15.025: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SESSION_REFRESH_RESP
Sep 8 18:15:15.025: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: dir:1, method:102, resp_code:403, container:4F947B38
Sep 8 18:15:15.061: //156/83D9548A803F/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x4C39C570
State of The Call        : STATE_DEAD
TCP Sockets Used         : NO
Calling Number           : 0417XXXXXX
Called Number            : 038682XXXX
Source IP Address (Sig ): 211.30.48.136
Destn SIP Req Addr:Port : 203.161.164.69:5060
Destn SIP Resp Addr:Port : 203.161.164.69:5060
Destination Name         : 203.161.164.69
Sep 8 18:15:15.061: //156/83D9548A803F/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream             : 1
Negotiated Codec         : g711ulaw
Negotiated Codec Bytes   : 160
Nego. Codec payload      : 0 (tx), 0 (rx)
Negotiated Dtmf-relay    : 0
Dtmf-relay Payload       : 0 (tx), 0 (rx)
Source IP Address (Media): 211.30.48.136
Source IP Port    (Media): 17768
Destn IP Address (Media): 203.161.164.69
Destn IP Port    (Media): 18314
Orig Destn IP Address:Port (Media): [ - ]:0
Sep 8 18:15:15.061: //156/83D9548A803F/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC)    : 21
Disconnect Cause (SIP)   : 403
Any Ideas
Doug

Hi Tapan,
Firstly the topology is as follows
ISP/VOIP provider - Internet - Cable modem - 2800 CME router - IP Phone
The VM is provided by the ISP
debug ccsip messages
Sep 9 10:21:41.488: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 203.161.164.69:5060;branch=z9hG4bKv0hlbo2030i1c85sm7b0.1
From: "0417XXXXXX"[email protected];user=phone>;tag=SD1uttd01-353510938-1315527701453-
To: "Doug Goding"[email protected]>
Call-ID: SD1uttd01-c27fdbf3f1de4ad1f0f2e1342b210494-au418e3
CSeq: 633854439 INVITE
Contact:
Supported: 100rel,timer
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
Accept: multipart/mixed,application/media_control+xml,application/sdp
Min-SE: 60
Session-Expires: 1800;refresher=uas
Max-Forwards: 9
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 317
v=0
o=BroadWorks 18275729 1 IN IP4 203.161.164.69
s=-
c=IN IP4 203.161.164.69
t=0 0
m=audio 18128 RTP/AVP 18 8 0 101
c=IN IP4 203.161.164.69
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=bsoft: 1 image udptl t38
Sep 9 10:21:41.508: //4375/867C64EB8067/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 203.161.164.69:5060;branch=z9hG4bKv0hlbo2030i1c85sm7b0.1
From: "0417XXXXXX"[email protected];user=phone>;tag=SD1uttd01-353510938-1315527701453-
To: "Doug Goding"[email protected]>
Date: Fri, 09 Sep 2011 00:21:41 GMT
Call-ID: SD1uttd01-c27fdbf3f1de4ad1f0f2e1342b210494-au418e3
CSeq: 633854439 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
Sep 9 10:21:41.516: //4375/867C64EB8067/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP 203.161.164.69:5060;branch=z9hG4bKv0hlbo2030i1c85sm7b0.1
From: "0417XXXXXX"[email protected];user=phone>;tag=SD1uttd01-353510938-1315527701453-
To: "Doug Goding"[email protected]>;tag=39373A4-586
Date: Fri, 09 Sep 2011 00:21:41 GMT
Call-ID: SD1uttd01-c27fdbf3f1de4ad1f0f2e1342b210494-au418e3
CSeq: 633854439 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=21
Content-Length: 0
Sep 9 10:21:41.544: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 203.161.164.69:5060;branch=z9hG4bKv0hlbo2030i1c85sm7b0.1
CSeq: 633854439 ACK
From: "0417XXXXXX"[email protected];user=phone>;tag=SD1uttd01-353510938-1315527701453-
To: "Doug Goding"[email protected]>;tag=39373A4-586
Call-ID: SD1uttd01-c27fdbf3f1de4ad1f0f2e1342b210494-au418e3
Max-Forwards: 9
Content-Length: 0
Voice Config
Router#
voice service voip
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
registrar server expires max 3600 min 3600
localhost dns:mel.byo.engin.com.au
no call service stop
voice class codec 1
codec preference 1 g711ulaw
voice translation-rule 10
rule 1 /^0/ //
voice translation-rule 11
rule 1 /^.*/ /0386821234/
voice translation-profile PSTN_Outgoing
translate calling 11
voice-card 0
dsp services dspfarm
mgcp profile default
sccp local Vlan100
sccp ccm 10.1.100.1 identifier 1 version 7.0
sccp
sccp ccm group 1
bind interface Vlan100
associate ccm 1 priority 1
associate profile 1 register confdsp
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 4
associate application SCCP
dial-peer voice 99 voip
translation-profile outgoing PSTN_Outgoing
destination-pattern .T
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 100 voip
session protocol sipv2
session target dns:mel.byo.engin.com.au
incoming called-number 0386821234
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 110 voip
description ** Incoming call from SIP trunk (Generic SIP Trunk Provider) **
session protocol sipv2
session target dns:mel.byo.engin.com.au
incoming called-number .%
dtmf-relay rtp-nte
no vad
dial-peer voice 90 voip
description Melbourne 03 Numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern [89].......
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 91 voip
description National Numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern 0[278]........
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 92 voip
description Vic/Tas 03 numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern [56].......
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 93 voip
description Mobile numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern 04........
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 94 voip
description 13XXXX numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern 13[1-9]...
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 96 voip
description 1300/1800 numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern 1[38]00......
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 98 voip
description Emergency 000
translation-profile outgoing PSTN_Outgoing
destination-pattern 000
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
sip-ua
credentials username 0386821234 password 7 XXXX realm voice.mibroadband.com.au
authentication username 0386821234 password 7 XXXX
nat symmetric role active
nat symmetric check-media-src
no remote-party-id
retry invite 2
retry register 10
timers connect 100
mwi-server dns:mel.byo.engin.com.au expires 3600 port 5060 transport udp unsolicited
registrar dns:mel.byo.engin.com.au expires 3600
sip-server dns:mel.byo.engin.com.au
connection-reuse
telephony-service
sdspfarm conference mute-on #1 mute-off #2
sdspfarm units 2
sdspfarm tag 1 confdsp
conference hardware
max-ephones 42
max-dn 144
ip source-address 10.1.100.1 port 2000
calling-number initiator
service phone videoCapability 1
service phone displayOnDuration 00:01
service phone displayOnTime 08:30
service phone displayOffTime 17:30
service phone displayIdleTimeout 00:01
service phone displayOnWhenIncomingCall 1
system message Cisco CME
load 7941 SCCP41.8-4-2S
load 7942 SCCP42.8-4-2S
load 7945 SCCP45.8-4-2S
load 7961 SCCP41.8-4-2S
load 7962 SCCP42.8-4-2S
load 7965 SCCP45.8-4-2S
load ata ATA030204SCCP090202A
time-zone 48
date-format dd-mm-yy
voicemail 90125200
mwi relay
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh music-on-hold.au
web admin system name cisco secret 5 $1$d8/H$glhLiCCWXmFSUp6BtwGho0
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern 0.T
create cnf-files version-stamp 7960 Jul 06 2011 10:32:45
ephone-dn 1 dual-line
number 038682XXXX
label 101
name 7965
mwi sip
ephone-dn 2 dual-line
number 102
label 102
name 7941
ephone-dn 3 dual-line
number 103
label 103
name 7920
ephone 1
device-security-mode none
video
mac-address 0023.5EB8.6E4E
type 7965
button 1:2 2:1
ephone 3
device-security-mode none
mac-address 0019.0633.A933
max-calls-per-button 2
type 7920
button 1:3
ephone 10
device-security-mode none
mac-address 0019.E7B7.BAB3
max-calls-per-button 2
type ata
button 1:1

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

How do I get FaceTime for Mac to stop ringing after answering an incoming call on my iPhone?

I have iPhone Cellular Calls enabled for iPhone and FaceTime and am able to make and receive calls splendidly with FaceTime. However, when I answer an incoming call on my iPhone, FaceTime will not stop ringing. This is a significant, loud, annoying issue for me, my caller, and everyone in my house. It rings for eternity, long after the call has ended, until the call notification on my Mac is either accepted or declined. FaceTime needs to know when the call is answered on another device and stop ringing. Is there any solution for this?

This works for me:
To turn off Phone Calling on your iPad or iPod Touch, go to FaceTime under Settings and switch off iPhone Cellular Calls. On your Mac, open the FaceTime app, then go to Preferences under FaceTime, and tap Settings. From there, switch off the iPhone Cellular Calls option.
Found it here:http://www.pocket-lint.com/news/131449-why-s-my-mac-taking-my-iphone-calls-how-t o-turn-off-apple-continuity
I realise it doesn't quite solve the issue of FaceTime "knowing" whether the call has already been answered on another device, which I agree is a flaw. But in my case, I don't want to receive regular phone calls on my Mac at any time. Only the very rare FaceTime call. So turning off cellular calls is a solution of sorts.

ISDN E1 PRI incoming calls busy out after 2nd b channel picks up

I have an ISDN E1 PRI line coming in from the Telco. D Channel comes up nicely and B channels accept calls, but only the first two calls. Once two callers are online, any further incoming calls get a busy tone. ISDN Debug data reports:
**ERROR**: call_incoming: Remote Protocol Error: No b channel assigned by switch, call id 0xCE
Hardware I'm using? Cisco 2650, 12.3(7T) and NM-HDV, VWIC-2MFT-E1-DI
Anybody please help?

Problem sorted - believe it or not, it was the telco. They changed their switch setting for the line to preferrable B channel - and voila!
Thanks,
Brian

Cant accept incoming calls

Similar Messages

Maybe you are looking for