Cant Access 10g Grid Control

Hi Everyone!
I just tried to start Enterprise Manager (Grid Control) on our 10g server (using the 'Application Server Control Console' icon from Windows), and Internet Explorer gives me a "page cannot be displayed" error, with "Cannot find server or DNS Error" as the reason.
From what I can see, the relevant services are running, but I'm not sure what else to check.
What can I check?
Many thanks.

Please post this question in
Enterprise Manager 10g Grid Control
Enterprise Manager
Is it a DHCP?
Adith

Similar Messages

  • Oracle 10g Grid Control Installation On RedHat Advanced Server 3.0

    I am planing to install Enterprise Manager 10g Grid Control Release 1 (v10.1.0.3)
    on RedHat Advanced Server 3.0. The agent I am trying to download is showing version 10.1.0.4.1. I am not sure iof this agent is going to work with (v10.1.0.3). Pl. let me know if someone has performed this installation. Do I need to apply any patch on OEM and agent.
    Thanks
    Raj

    Actually, entirely the other way around, unless you like seeing errors in your OMS.
    OMS must be at at least the same patch level as the communicating agents.
    10.1.0.3 agent against a 10.1.0.4 OMS = OK
    10.1.0.4 agent against a 10.1.0.3 OMS = Bad mojo
    Download the 10.1.0.4.1 patchset from Metalink and update your OMS, or stick with the 10.1.0.3 agent if you've no access to metalink.

  • Want Access Data Grid control in SharePoint 2013?

    Hello everyone!
    Recently we noticed something funny in SharePoint 2013. While quite many people were hoping to have the datasheet view like those in SP2007 and 2010, Microsoft has chosen a different interface to display datasheet view.
    Now, if you try to create a sub site under a publishing site, and use the
    Publishing Site template then try to create a datasheet view in the sub site, SharePoint will try to use the Access data grid control to display the view. In some situations the view will display and other situations it will not, and will show this
    error:
    The list is displayed in Standard view. It cannot be displayed in Datasheet view for one or more of the following reasons: A datasheet component compatible with Microsoft SharePoint Foundation is not installed, your browser does not support ActiveX controls,
    a component is not properly configured for 32-bit or 64-bit support, or support for ActiveX controls is disabled.
    If you create a sub site using Publishing Site with Workflow instead, then the datasheet view will be created properly using SP2013 interface.
    Using PowerShell, we can see that both Publishing Portal and
    Publishing Site With Workflow are using the BLANKINTERNET 53 template. The
    Publishing Site on the other hand is using the CMSPUBLISHING 39 template.
    Want to try it out and let me know if that happens to your SharePoint too?

    Hi Conway,
    I tested the issue in my environment per your description and it returned the results as below:
    I created a subsite using Publishing site under a team site in SharePoint server 2013, the datasheet view in a list displayed as pic1
    I reproduced the issue in SharePoint server 2010, the datasheet view in a list displayed as pic2
    It turns out by design the datasheet view in the subsite based on Publishing site template displays as your situation. Here is an article which explains this:
    http://www.sharepointblues.com/2010/03/31/data-sheet-view-not-working/
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Error while installing Oracle 10G Grid control in RHEL

    I was installing Oracle 10G Grid control in RHEL. Got the following error. Any idea what this means and what is the remedy?
    =======================================
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    /home/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre: relocation error: /home/oracle/jre/1.1.8/bin/../lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
    Configuration assistant "Oracle Net Configuration Assistant" failed
    =======================================
    regards,
    Anjan

    I saw this once but I forgot how I solved it. I believe that I made a softlink to the libc.so.6 from another libc. Have a look on Metalink, becauses I've got the idea for my solution there.
    cu
    Andreas

  • Install EM 10g Grid Control on  Solaris 10 x86

    Hi all
    I need to install Enterprise Manager 10g Grid Control Release 2 on Solaris 10 x86 platform.
    I found out the following link where I can download the software:
    http://www.oracle.com/technology/software/products/oem/index.html
    Howerver it seems that there isn't any download for my platform. Does anybody know where can I find the software?
    How can I configure EM Grid Control on that platform if I don't have the software. Does anybody know a manual installation and configuration method?
    King regard and thank you
    Aron

    That means it is not yet available for 10.2, but it is for 10.1

  • Configuration Assistant failed during OEM 10g Grid control installation

    Hi i got an error while installing OEM 10g Grid control 10.2.0.2.1 on Windows 2008 32bit server.
    Installation of OEM 10g was successfull but during configuration im getting an error "ORA-12560: TNS: protocol adaptor error". hence configuration assistant get failed to create emrep database. i stopped the TNSListener service and started db creation using DBCA again i got the same error. please find the below logs from db10g/cfgtoollogs/cfgfw
    INFO: oracle.assistants.dbca:About to execute plug-in Oracle Database Configuration Assistant
    INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant is running
    INFO: oracle.assistants.dbca:Launching CmdExec
    INFO: oracle.assistants.dbca:ExitCode=1
    INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant executed as attached=true in separate process with exitcode=1
    INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant has failed its perform method
    Note: i got one more error during installation which is "Failed to initialize OCR" and "OS error in starting service OracleCSService"
    INFO: Calling Action ntServicesActions10.2.0.3.0 ntStartService
         selectedNodes = null
         serviceName = OracleCSService
    INFO: Exception thrown from action: ntStartService
    Exception Name: StartIndeterminate_OS_ErrorException
    Exception String: OS error in starting service OracleCSService
    Exception Severity: 0
    please provide me the solution.

    [http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
    [Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
    http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
    HTH
    Anantha

  • Oracle Enterprise Manager 10g Grid Control Release 5

    Hi All,
    Has anyone here already using Oracle Enterprise Manager 10g Grid Control Release 5? Currently we are using Release 2 of Oracle Enterprise Manager as a package upon installation of Oracle 10g. Curious about Release 5 I want to try it out in our Dev Environment. But before making any changes. I would like to ask guidance from you.
    Upon installation does it needs Operating System Patches, Packages etc.? Currently we are using AIX 5L Based Systems (64-Bit) and 10g for Database. Is this a complete installation or Just an upgrade?
    Regards,
    Dexter

    We are using 10.2.0.5 on windows.
    10.2.0.5 is just an upgrade
    How to install and upgrade on AIX?
    http://www.oracle.com/technology/software/products/oem/htdocs/Grid_Control_10.2.0.5.0_AIX5L_readme.html
    quick installation quide.
    http://download.oracle.com/docs/cd/B19306_01/install.102/b28033.pdf
    Hope that will help you.
    Anil Malkai

  • Installing Enterprise Manager 10g Grid Control Using an Existing Database

    I want to install Enterprise Manager 10g Grid Control 10.2.0.3 using an existing database. This database is RAC 10.2.0.2. and I use it as Infrastructure Metadata Repository.
    I is said in Oracle documentation that SYSMAN schema has to be dropped, thus Database console repository has to be dropped. As far as I understand after Grid Control installation I will not be able to use Database console for my RAC 10.2.0.2 Infrastructure Metadata Repository database. I will be able to use only Grid Control for this database.
    Am I right? Could you give me any advice about Installing Enterprise Manager 10g Grid Control Using an Existing Database?
    Thank you.

    I am trying to install the OEM rel 2.0 on AIX 5L from the downloaded software zip files which are as below,
    AIX_Grid_Control_full_10201_disk1.zip (656,766,406 bytes) (cksum - 2157028496)
    AIX_Grid_Control_full_10201_disk2.zip (655,758,726 bytes) (cksum - 2350778444)
    AIX_Grid_Control_full_10201_disk3.zip (641,760,716 bytes) (cksum - 2053607771)
    AIX_Grid_Control_full_10201_disk4.zip (606,903,411 bytes) (cksum - 4162514797)
    AIX_Grid_Control_full_10201_disk5.zip (576,555,758 bytes) (cksum - 3304661461)
    AIX_Grid_Control_full_10201_disk6.zip (459,658,650 bytes) (cksum - 3120478203)
    AIX_Grid_Control_full_10201_disk7.zip (311,903,435 bytes) (cksum - 2438252536)
    AIX_Grid_Control_full_10201_disk8.zip (224,594,251 bytes) (cksum - 2618845234)
    I am unable to locate the runInstaller in any of the disks 1- 8 ,can somebody help me on this. Thanks

  • Insufficient Data in Interval.  on 9i db  in 10g grid control

    Hi,
    I am getting this while trying to monitor a 9i db in 10g grid control.
    Insufficient Data in Interval. For displaying data on this page, two historical snapshots are needed. Make sure that two snapshots are present in the target database instance. In addition modify the interval so that it is contained within two available snapshots
    Is there anyway how to deal with this .
    TIA
    PK

    Sounds like its looking for statspack data.
    Can you run statspack.snap() as perfstat user a couple times and see if it sees the data.
    If thats way off - then what screen are you seeing this on?

  • Can I see a Oracle9i db in a (10g) Grid Control?

    Hello, here is the scenario:
    I have a windows 2000 server. An Oracle 9.2.0.5 database is running already. I have freshly installed a Oracle 10g database. At this point both (9i and 10g) db are running fine.
    I am planning to install 10g Grid Control on that machine. Will I be able to see/include the Oracle 9i database in the Grid Control?
    Thanks in advance.
    Lily.

    Yes, as long as you have a 10g agent running on the server where the 9.2 db is, 10g grid control can be used to manage a 9.2 db.

  • Error - when creating a standby database with EM 10g Grid Control

    Hi,
    I am experiencing some problems when I want to create through the EM 10g Grid Control a standby database from a allready existing db. At step 2 when the files should be generated and copied to the other system, I am always getting the error that there isn't enough disk space on the other system. This can't be because there is at least 30GB free and the installer is asking for less than 1GB. I was searching the whole internet for a solution to this issue, but there was just nothing that could help me out with that point...
    Has someone an idea at this point? Thanks for helping...
    I am working on a Windows 2003 Server - Enterprise Edition for every system (Grid Control, Primary DB and Standby DB).
    Best regards,
    Patrick.

    Check that filesystem space using GC under targets>hosts on which you are trying to create standby. Do you have any specific error message from GC ? If GC shows proper size under host filesystem section then there shuld be no such problem. Double chk ur locations too.
    Regards,
    http://askyogesh.com

  • OMS unable to reach host in 10g grid control

    Greetings Gurus:
    I installed oracle 10g grid control r2 and agent on a windows xp machine. on another windows xp machine i installed the agent. i am able to see the host in grid control on the machine with the grid control installed but cannot see the remote machine with only the agent installed. i have reloaded and uploaded, started and stopped the agent using emctl and opmnctl without any issues(this is on the remote machine) but still cannot see the remote host. when i try to secure the agent on the remote machine i get the following:
    Requesting an HTTPS Upload URL from the OMS...   Failed.
    The OMS is not set up for Enterprise Manager Security.
    I am fairly new at using grid control and standby database and have had a torrid time trying to fix this problem. your assistance would be greatly appreciated

    *1. Stop dbconsole*
    emctl stop agent
    OR
    emctl stop dbconsole
    *2. Secure it*
    emctl secure dbconsole sysman_pwd agent_reg_pwd
    *3. Start dbconsole*
    emctl start dbconsole
    *4. After some time when the dbconsole starts check the status*
    emctl status
    Ss

  • How to know what *.exe is called my notification in OEM 10G Grid Control

    Our Port 25 is blocked. and the security does not want to open the port 25 for the machine. He wants to give exact .exe file the permission which executes the email..
    Do you guys what exe is called for email notification ?
    Thanks
    Atul

    You can get all the default Grid Control Ports in Metalink Note Note:235298.1 -
    Overview of Default Ports Used by EM 10g Grid Control, DB Control and AS Control

  • Creating a new Oracle Database using 10G Grid Control

    Hi
    Is it possible to create a new database using the 10g Grid COntrol.

    The way to create a database with EM, is by using Provisioning procedures. For instance with the Oracle Clusterware / RAC Provisioning For UNIX, you can provisioning Clusterware, ASM + ASM instance creation and DB Software. Then by provisoning you would create a database. There are also procedures to extend a cluster.
    So, provisoning is the way to go!
    Regards
    Rob

  • How to create dynamic web report in 10G Grid Control

    Hi experts..
    In OEM 9i, it provides a OEMgenerationServlet servlet to generate dynamic Web reports, my company uses the servlet to generate many OEM report, those reports cal also take parameters, such as dabatase name. the generated web reports are viewable to public end users. I am looking for a similar function in 10G Grid control...
    Does anyone have the similar requirement, any suggestion will be highly appreciated..
    Regards,
    Jinsen

    Hi,
    Thank you for the reply. I read about Clear and Purge from Oracle Doc about 10gR2, but nothing about R1. I drilled down all the way, can't find any thing to click for clear and purge. And I can't find anything from Oracle Doc, either.
    Laura

Maybe you are looking for

  • API Error Handling

    I want to create store procedure that reads datas from text file and using API to create the record in database. I've try to write the simple code by follow the code example in "Oracle Order Management Suit API and Open Interface". I have the followi

  • Unlimited data plan gone...please advise!!!

    I have been a VZW customer for two years now, and been using smartphones since July 2010. Therefore I have always had an unlimited data package and have thus been grandfathered in now that these new limited packages are available. Last Saturday, I or

  • HELPPPPP help during restore

    HELPPPP...my 4s came unplugged during a factory restore using Itunes, it is now frozen with a load bar thats not changing and itunes wont even find it when i plug it in. I cant do anything with is now and i was hoping that someone out there knows how

  • Rendering of Tax Registration Num text input is not work

    Hi All, We are use R12.0.6 instance. On Customer Screen Tax Registration Num and Credit text input are not appear. We checked the personalizations of Tax Registration Num; render is "Yes" but we could not entry the data. We bounced apache and cleared

  • Extended Analytics template label issue

    I'm trying to create star schema via extended analytics from work space but getting below error 'Invalid Extn Analy templete label. Please provide a valid template label. ' I followed all steps provided on http://www.oracle.com/technetwork/middleware