Cant access BIOS on Satellite L40T-A202
Hi!
Months ago i updated my Toshiba L40T-A202 laptop's bios. After the restart i cant seem to access the bios. I fixed it by jumping the jcmos in mobo. Now the problem occurrd again and i cant seem to fix it with the same fix i did.
Can someone help me? This latop was bought outside the country and i dont want to spend much cash and send it to repair shops.
Please help me on this.
Yes. I know i already voided the warranty by doing that. But jumping the cmos is the only qay to do that at that point. Besides toshiba service station here is very far and as I've said I don't have the means of flying there. Anyway to answer your questions sir: Yes, it was successfully updated. I can see the toshiba screen at start-up but it is stuck there, hence I can't log into windows.
The stuck in toshiba screen already happened before, but fixed by jumping the cmos. But now the problem appeared again and jumping the cmos don't seem to work anymore.
Thanks for the response sir.
Message was edited by: mbermundo
Similar Messages
-
How to access BIOS on Satellite L670-134
Hi there,
i need to access the BIOS but i dont know the key combination.
Tried F1 F2 DEL Backspace etc none worked.
I think i turned an option like fast boot on once before... when i turn on the laptop i cant see any postscreen, the screen stays black after turning the laptop on and then the windows logo appears.
So how do i access the BIOS!?Hi buddy,
If you enable this fast boot option you must be very quick to enter the BIOS so press F2 key immediately after you turned on your notebook.
Alternative you can access the BIOS using preinstalled Toshiba HWsetup. The fast boot option you can also disable/enable with this tool as far as I know. -
Z77A-G43 cant access BIOS with USB keyboard
Hello guys,
I`ve been running into a bit of trouble.
It seems that I can no longer access the UEFI / BIOS menu at boot time by means of DEL key.
Even though my USB keyboard is powered and lighten up, the motherboard won`t take input from it. I can`t use ANY of the keys (DEL, Pause, F11 ..) until OS is done booting.
On the other hand, and old PS/2 keyboard apparently works just fine.
Now, I did tried the usual steps for troubleshooting: reset bios, then update to the latest version (2.12) / clear CMOS, etc.
So far, no luck.
Whats boggles me is that I know FOR SURE that the keyboard used to work some time ago. I mean, it`s the only one I have and I know I used it to set up the BIOS when I initially put the PC together.
Any further advice will be most welcomed.
Thanks.Quote from: sisif on 17-November-13, 21:30:20
Some digging on the tubes hints to FastBoot option not allowing USB to run during POST.
I`ll keep trying ..
10x for the advice
Thats it man, turn it off and it will work. The same happened to me, now I can acces it without any problems. -
Hi Everyone,
I have had my pc for a few months now and i have been able to access my bios with no issues at all.
However, for a few days now my computer has skipped past the option to enter bios and just starts windows almost immediately. Everything ive tried to access it (ie press del or F8 etc when i power on) has not let me in. At start up the code 'A2' flashes up for a split second on a blank screen then windows starts up.
Does anyone have any ideas what I can do?
ThanksQuote from: jch1321 on 05-July-14, 05:26:15
Yes I had fast boot enabled. I cleared CMOS and that has solved the problem.
Thank you -
Can't access BIOS Setup on my Satellite C660-24F
I cant access my laptop Bios Setup - when I pres F2 , F11 or F12
*Satellite C660-24F PSC1NE*
It only statup Windows I cant access BIOS startup menu. I searched for BIOS updat for my model Satalite C660-24F - PSC1NE - and I didnt find on this web.
Can anyone help me please?Hi
The BIOS for this unit can be found on Toshiba EU driver page:
http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU
Currently it looks like the BIOS 1.50-WIN is the newest one.
According to BIOS access:
Press F2 while powering on the unit. This is the right and only method to access the BIOS. Press F2 several times in the row -
Satellite L55-B5357 Can't access BIOS
How can i access/open BIOS on my satellite L55-B5357 laptop?? I've never had an issue opening bios on any conputer i've owned. I like this laptop, but i need to access bios and just can't figure it out. I've held F2 while powering up, held FN key plus F2 while powering up, tried ESC and most other F keys to no avail. I get the Tishiba Black screen first then it goes to the windows screen where i have to log in, no bios option. Please help???? This is driving me nuts, i've searched all over the internet and you guys are my last hope, what can i possibly be doing wrong, this should not be a problem, it should be as easy as pressing a key during boot. Thanks.
Since Win 8 and 8.1 came along, things have changed a bit. Hold DOWN the shift key while clicking Shutdown. Hold DOWN F2 while pressing the Power button. Voila! The BIOS/UEFI will appear.
-
P-45 neo-f(outside box) / ms-7519(sandra)
BIOS : 64-0100-009999-00101111-081208-Eaglelake
version: 1.0
when i press [DEL] to enter the bios setup .. i get a blank screen .. and nothing more happends.
and sometimes the screen tells me "No signal input"
.. I have never been able to on this computer.
I never tried to update or flash the bios .
It would be a very slow process to get it fixed by the reseller ..probably a few month..
Maybe anyone here knows whats wrong?
and what i can do to fix it
The computer boots and operates normally .. but i want to disable the built in soundcard, to replace it with a better one.
I also want to replace the cpu with something faster.. its a 2.33ghz quadcore now .(whats the fastest cpu for this mainboard ? where can i find a list)
If i flash or reset the bios? will it autodetect the hardware, even if i still cant access the setup screen? or just make things worse
.. now it works .. its a miracle .. i figured out u u have to press del at the exact right moment at boot .. if u press it too soon .. = black screen .. too late = no signal input .. wierd design
but i still dont find this board at the msi site .. only p45 neo .. without F .. and i cant use the live update becuse of 64bit osQuote
only p45 neo .. without F
P45 Neo-F and P45 Neo are identical.
Quote
whats the fastest cpu for this mainboard ? where can i find a list)
On the MSI Product Site for your Board:
http://global.msi.eu/index.php?func=prodcpu2&prod_no=1482&maincat_no=1&orderby=cpu_speed%20ASC#menu
Quote
its a 2.33ghz quadcore now
Must be a Q8200 then. But which one exactly? There are three different revisions. In any case, if your really have BIOS v1.0, you need a BIOS Update to ensure proper CPU Support.
Quote
P-45 neo-f(outside box) / ms-7519(sandra)
BIOS : 64-0100-009999-00101111-081208-Eaglelake
version: 1.0
Do not trust Sandra for board and BIOS Information. Please check your current BIOS Version in the BIOS Setup under Standard CMOS Features -> System Information.
Before posting another reply here, please read this:
>>Posting Guide<< -
P67A-GD55 can't access bios.
Had problem earlier to access bios using an msi p67a gd43, today i changed in to a p67a gd55 and i have the same problem. When i start it counts "98","99","A3" and then i press ALT and it just locks saying "starting setup".
I'm able to boot in to windows 7 64bit without any problem.
My setup is:
CPU: i5 2500k
GFX: Palit Geforce GTX460 768mb
RAM: 2x UMAX DDR3 1600 oc 2gb
PSU: Zumax 630W
I've unplugged all HDD and DVD.
So far I've tried to Clear Cmos with button and also jumper/battery method. Bios was 1.8 stock but flashed it anyway to 1.8.
Switch slots for RAM.
Removed the moderboard from chassi so it had no metal contact.
Changed PSU.
Only things i havent been able to change is ram and gfx so i suppose one of them is causing this problem, as for the memory im not able to get any information from it in sisoft sandra, in cpu-z it cant identify the brand.
Anyone had this or similare problem, and what did you do?Quote
I hearby would like to inform all people that cetus UMAX DDR3-1600 OC is NOT suitable with MSI's P67 chipset.
It would be beneficial if you could advise the forum what memory you are using now that does work. Makes it easier for others that are considering memory for their boards. -
Laptop will not boot, stops at Toshiba screen then an error message. Can't access BIOS
I receive the following error message:
For Atheros PCIE Ethernet Controller v2.2.7(11/02/10)
Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key
Before it first shut down, there was some blue screen with a message I was unable to read in time. I turned it back on and got the above message. I have done some research and it sounds like some kind of hard drive problem. I've checked the hard drive connection and it's fine, the same message appears. I also saw that you can access BIOS(not sure what this is exactly, I've never used it) and then somehow recover, reset or change a boot setting that may have changed by itself. I can't access it though. I have tried F8, I have tried pressing escape as soon as the red Toshiba screen comes on, and also tried holding it and releasing when the tone sounds, then pressing F1 but all I get is a tone and no screen.
It's about to be finals week and I really need some help getting this fixed...preferrebly without having to by a new hard drive because all kinds of homework, papers and study info is on this computer. I haven't even had it for two years yet. I can attach a picture of the screen if needed but it's just a black screen with the above message.
Thanks for any help!
EDIT: Satellite L655-S5150 and Windows 7
Solved!
Go to Solution.It does sound like a hard drive related issue, be it a virus, or physical failure. If you have fast boot enabled, you will need to hold down F8 while you power up, as just tapping F8 at the BIOS splash screen will not work. If you are unable to recover that way, hopefully you created recovery media when you first got the laptop(it would have prompted you in the action center).
If that was not done, you could always swap in a new hdd to get the system up and running, and get a eSATA to USB cable to get all of your info off your old drive.
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system) -
T43 motherboar​d damage cant access hard drive
Hello, I wonder if anyone to there could advise me.
I have a T43 with finger print reader, I was shoved on the train and dropped my bag
which resulted in it hitting the floor and the plug punched through the back into the
motherboard. The laptop was in standby at the time.
I have brought a USB 2.5 hard drive connector to try and recover my data but cannot
access it.
Is the hard drive encrypted if the finger print reader is used.
Can the hard drive be crashed so badly by the mother board being damaged that
you cant access it anyway?
Many Thanks
Davedavidadams, welcome to the forum,
ouch! sorry to hear about your bad luck.
The fingerprint doesn't encrypt the hard drive, Client Security does if you configured it to do so.
If you had the finger print configured with a hard drive password set in bios you will not be able to access the hard drive in an usb enclosure. As long as you know the password it is possible to remove the password in another ThinkPad, preferably another T43.
As your T43 was in standby, it is possible that the drop also damaged the hard drive. This would have been less likely if it had been in hibernation mode or turned off as the heads would have been properly parked.
There are ways to recover files from a damaged hard drive, some less costly than others; it depends on how badly it is damaged, if it is damaged.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
My ideapad S300, running 64-bit os, cpu 64-bit, I need to enable VT via the bios, cant access the bios via setup, there is no option to edit bios, what is up with that !. Am running a Vmware player, wich will not run without Vizuliation, can anybody help me, my new business depends on it, by this time next week !.
Thanks !!!!hi mikeevy2,
That's good to know but the recovery disc will just re-install the OS and will not allow you to enable Intel VT in the BIOS.
If the machine came with a pre-installed Windows 7, see also if you can access the BIOS by pressing F2 on startup (Fn+F2 is required if you have function key as an alternate key)
Spoiler (Highlight to read)
regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
hello, im new to this so i hope my lack of knowledge isnt to frustrating. i need help though. i recently 95% completed my first build. using the items listed below. now i cant access my slave drive. i receive a message telling me " d: drive not formatted do you wish to format now" in windows (the drive in question has always been a slave never had any os installed but was present with the xp os on master drive in previous system) both hard drives and cds are present in bios and in windows , i was wondering if there is ANY way to save teh data or if im out of luck thank you for any information. look forward to learing more .
windows XP pro OS
MSI pt880 NEO-LSR main board
Pentium 4 2.40A Ghz 104 V max cpu
512 ddrram memory,( more to follow)
IBM ide 12 gig drive (master) IDE 1
western didgital 80 gig drive (slave) IDE1
cd rom (master) IDE2
plextor cd/cdw (slave) IDE2
im not sure if you need more specs than that please let me know if you do i can look it up as i said im new but willing to learn. thank you
i accidently posted in the amd forum first , but was given the advice to try it in another system and save to cd's so ill try that. any other advice would be greatly appreciated. thank youFirst, you need to verify that D: point to your slave drive. You can do that in WinXP Disk Management. Do you have any valuable information you need in the slave drive? If no, just go ahead and format it. Did you also mention the slave drive had a OS for previous system? If yes, change the boot sequence settings in the BIOS and let it boot to your slave drive. Perhaps from there you can save some data. If not, well, just go ahead and format it.
-
Asa 5505, the outside cant access to a server in the inside
hi, i have an Asa 5505, a pc in the outside with the ip 10.1.1.6 cant access to a server in the inside 192.168.1.4, pls help...
this is my conf:
ASA Version 8.0(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 0
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 10.1.1.2 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa804-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list 100 extended permit tcp any host 10.1.1.3 eq www
pager lines 24
logging enable
logging asdm debugging
mtu inside 1500
<--- More --->
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-613.bin
no asdm history enable
arp timeout 14400
nat-control
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 10.1.1.3 192.168.1.4 netmask 255.255.255.255
access-group 100 in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
<--- More --->
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.1.2-192.168.1.254 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
<--- More --->
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:14e7b74fabc386613ae646b915f60e9e
: end
ciscoasa#Andres
The security level for your inside interface should be 100 ie.
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
After changing that can you
1) ping the outside interface of the ASA from the pc or ping the PC from the ASA
2) I'm assuming you are trying to connect to 10.1.1.3 when you attempt the connection ?
Jon -
Can not access BIOS after update BIOS
Can not access BIOS after update X220 BIOS to version 1.19
Type: 4290-R32
BIOS: 1.19
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.iso
Ask google and try anyway but not work
- Press ThinkVantage, Press F1, Press Fn+F1
- Power off, unplug AC, unplug battery, wait 15 miniute, try all again
- Try to update BIOS againThat is really weird.
When you are in Windows, can you test and see if the F1 key is working? If it is working. Shut down the laptop then boot it back up. At the Thinkpad screen, keep spamming the F1 key and see if you are able to boot into BIOS.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD -
Why i cant access asa 8.4 thruogh asdm from outside interface ???
hi all ,
plz help e why i cant access asa asdm from outside interface
my puclic ip on outisde is :
x.x.55.34
i changed portf of asdm to 65000 because i have portforward ,
i tried to connect to my ip thriuogh asdm bu :
x.x.55.34
x.x.55.34:65000
but no luck ,
it succed if i try to connect locally
here is my sh run command :
====================================================
ASA5505#
ASA5505# sh run
: Saved
ASA Version 8.4(2)
hostname ASA5505
enable password qsddsEGCCSH encrypted
passwd 2KFsdsdbNIdI.2KYOU encrypted
names
interface Ethernet0/0
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 2
interface Vlan1
nameif ins
security-level 100
ip address 10.66.12.1 255.255.255.0
interface Vlan2
nameif outside
security-level 50
ip address x.x.55.34 255.255.255.248
boot system disk0:/asa842-k8.bin
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-0.0.0.0
host 0.0.0.0
object network localsubnet
subnet 10.66.12.0 255.255.255.0
description localsubnet
object network HTTP-Host
host 10.66.12.249
description web server
object network HTTPS-HOST
host 10.66.12.249
description Https
object network RDP-Host
host 10.66.12.122
description RDP host
object network citrix-host
host 10.66.12.249
description citrix
object service rdp
service tcp destination eq 3389
object service https
service tcp destination eq https
object service citrix
service tcp destination eq 2598
object service http
service tcp destination eq www
object network RDP1
host 10.66.12.249
object network HTTPS-Host
host 10.66.12.249
object network CITRIX-Host
host 10.66.12.249
object-group network RDP-REDIRECT
object-group network HTTP-REDIRECT
object-group network HTTPS-REDIRECT
object-group network CITRIX-ICA-HDX-REDIRECTION
object-group network CITRIX-ICA-SESSION-RELIABILITY-REDIRECTION
object-group service CITRIX-ICA-HDX
object-group service CITRIX-SR
object-group service RDP
object-group network MY-insideNET
network-object 10.66.12.0 255.255.255.0
access-list outside_in extended permit tcp any host 10.66.12.249 eq www
access-list outside_in extended permit tcp any host 10.66.12.249 eq https
access-list outside_in extended permit tcp any host 10.66.12.249 eq 2598
access-list outside_in extended permit tcp any host 10.66.12.122 eq 3389
access-list outside_in extended permit tcp any host 10.66.12.249 eq citrix-ica
access-list outside_in extended permit tcp any host x.x.55.34 eq 65000
access-list outside_in extended permit tcp any host x.x.55.34 eq https
access-list outside_in extended permit ip any any
pager lines 24
mtu ins 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645.bin
no asdm history enable
arp timeout 14400
object network localsubnet
nat (ins,outside) dynamic interface
object network HTTP-Host
nat (ins,outside) static interface service tcp www www
object network RDP-Host
nat (ins,outside) static interface service tcp 3389 3389
object network HTTPS-Host
nat (ins,outside) static interface service tcp https https
object network CITRIX-Host
nat (ins,outside) static interface service tcp citrix-ica citrix-ica
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 62.109.55.33 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable 65000
http 10.66.12.0 255.255.255.0 ins
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet 0.0.0.0 0.0.0.0 outside
telnet timeout 5
ssh timeout 5
console timeout 0
management-access outside
dhcpd address 10.66.12.160-10.66.12.180 ins
dhcpd dns 212.112.166.22 212.112.166.18 interface ins
dhcpd enable ins
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username test password P4ttSdddd3SV8TYp encrypted privilege 15
username ADMIN password 5dddd3ThngqY encrypted privilege 15
username drvirus password p03BtCddddryePSDf encrypted privilege 15
username cisco password edssdsdOAQcNEL encrypted privilege 15
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD
CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: endFor access over VPN you need:
management-access inside
and don't forget:
ssh inside
http inside
I'm guessing you forgot to grant ASDM (http/https) access to the IP addresses used by the VPN? Can you SSH? If not, that is your problem to solve first.
Maybe you are looking for
-
Oracle DB 10g - Count records from a subquery is to slow. (after tuning)
Hi everybody: I have the following problem. 1.- I have a transactional table with 11 millions of records. 2.- The user asked for a few reports, to know some sumarized data for business decisions. 3.- Initialy the query was developed in a development
-
Terrible Flickering/Delay While Playing Video in Hyper-V
Hello Community, I have a Hyper-V server running on Windows 8.1. I have had it for a couple years now. There's been this problem that has been bugging me (I can't believe I waited this long to say anything!) and I wanted to see if someone can help me
-
OAM 10g - Simple question (I think)
Hey guys, I want to run something by you to see if I'm missing something critical. What I'm trying to do is fairly simple... I want 2 login forms for the same webpage, depending on which hostname is used. internal.mydomain.com external.mydomain.com b
-
User exit for release strategy
Dear Sappers I want to reset the release strategy after change in price field for PO or Scheduling agreement .( When the price less than the ex-price then PO never goes to release ) For this, We have to required the user exit can u please tell me whi
-
EXCEPTION_DURING_EXECUTE and Cannot create target element ?
hi experts i got error in jdbc to idoc scenario (PI 7.1 sp7) <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!-- Request Message Mapping --> - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap