Cant access internet on desktop computer

My laptop works but when i try and connect to the internet on my desktop computer it says that the user name and password is wrong. Someone please help me. By the way i have windows 98 on the desktop compter. I have the wireless WRT54G router

It sounds as though you have 98 configured as a PPOe connection. Try creating a new connection for your desktop. Use Automatic settings for connection rather than PPOe. This may help. You may have to BIND TCIP to the network adapter rather than DIALUP. WIN 98 is tricky because you have to know how to get to the bindings. Are you trying to connect via wired connection to the ports on the router, or is it wireless you are using on the desktop. Windows 98 is not very good for this. You might want to consider upgrading to XP, obviously VISTA would be too much for this computer you are using. Good luck.

Similar Messages

HT2534 i cant access internet in iphone 4s if i click on safari it shows cellular data could not connect what should i do now

i bought a new iphone i dont know how to operste it. i cant access internet too. what should i do now?.

Hello mskanan
Check out the article below to troubleshoot the issue of not being able to get on your cellular connection.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Regards,
-Norm G.

I cant access internet with new i pad 2 , i have a netgear dgn 1000 router any ideas

i cant access internet with new ipad 2 ,i have a netgear dgn 1000 router any ideas.............

More detail please. Assuming you knew how to set up the internet connection, have you tried resetting the iPad and/or rebooting the router?
The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook.

Full bars, 3g connected, but cant access internet

please help me, i'm using TELKOMSEL (indonesian) i have data plans, and it's 4gb, the thing is, as i said Full bars, 3g connected, but cant access internet, i tried to access google using safari, chrome, but still the same message, network not available, those things.... PLEASE HELP ME..

It sounds like a poor data connection. I get the same thing when I try to use AT&T here in my house. It shows 4G and 3 bars but I get little to no data at all. If that is what is happening to you, you can try another carrier if there is one.
Here, I can get LTE at my house and about 10-15Mbps on T-Mobile. Switching carriers can make the difference.

App cant access internet

scenario: generated app in app studio that access youtube
I installed on lumia 535 windows phone 8.1 and its ok
But when i installed(via link sent to me from app studio) the app in windows desktop 8.1 cant view the you tube video because cant access the internet
ideas?

Hi, omrfrq.
Thank you for visiting Apple Support Communities.
I understand that you are unable to connect to the internet after updating. I am not sure if you are experiencing this issue while on Wi-Fi or via the cellular data network. However, here are a couple troubleshooting articles that cover both scenarios.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network
iPhone cellular data connection issues
-Jason H.

I cant access internet through ma black berry curve.

one weak back i bought ma new blackberry curve mobile. m new to it so m facing bit problem wth ma fone.can u please tell me how can i access internet. like other phones depends n GPRS so blackberry depends on which software. plz yar help me out of dis. thank u...

Under options>advanced>tci/ip punch in your carriers APN, make sure it is also showing edge or gprs on your network bar
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed

Remote user cant access internet

Hello there,
I have a problem with my remote vpn users. They cant acces internet after they establish vpn connection. I read about split tunnel and i think its right configured, but its not working.
Please if you have the time take a look. I attached my asa 5505 configuration
Best regards.

your split-tunneling is configured correct, but the group-policy in which this configuration is done is not applied to the tunnel-group:
tunnel-group monitoring_vpn_group general-attributes
default-group-policy monitoring_vpn_policy
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Read FAQs and still cant access internet

im working with a WRT54GR and i cant seem to connect to the internet anymore
i set up my router last night and everything was working fine
i downloaded and installed a few windows updates on my computer .. i took a personal phone call and when i got back to my laptop i couldnt connect to the internet anymore
now im recieving a strong signal from my router ..
.. my wireless client is telling me ive got a smooth connection not only to my router but to my internet as well .. and i still cant connect to the internet
.. i have read the FAQs and followed every instruction and still i have no connection .. according to the FAQs it should work .. but it doesnt
i just got done lowering the RTS threshold hoping that would fix my problems .. but still no
what do i do?
please helpMessage Edited by Pointblank510 on 11-12-200605:58 PM

... seems like it
"Pinging webgod.linksys.com [66.161.11.20]with 32 bytes of data:
Reply from 66.161.11.20: bytes=32 time=37ms TTL=42
Reply from 66.161.11.20: bytes=32 time=37ms TTL=42
Reply from 66.161.11.20: bytes=32 time=37ms TTL=42
Reply from 66.161.11.20: bytes=32 time=37ms TTL=42
Ping statistics for 66.161.11.20:
Packets: Sent = 4, Recieved = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 24ms, Maximum = 37ms, Average = 27ms"

Cant connect internet to home computer

hi, able to connect to my sons laptop but cant contect to home computer. have a westell versa link model 327w old as mud! i went int the 192.168.1.1 maybe more harm than help to try to connect. is there something on my home computer that i can click to contect to internet? internet is up but cant contect to that computer! help

Before I can tell you what to do, I must get more info.
Are you trying to connect this home computer to the Internet OR are you trying to allow users from the Internet to connect to that computer?
If you are trying to connect this home computer to the Internet:
What is the OS and Version?
If you know it is Windows but you don't know which version..
a) Go to Start -> Run.
b) Type in winver and press enter.
If you are trying to to allow users from the Internet to connect to that computer, not only what OS and Version does that computer use, what app are you trying to forward for?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

IMac and XP machine, if both switched on cant access internet.

If I switch on my XP PC, and connect to internet through a router, through to cable modem everything ok.
if I then switch on my iMac I cannot connect to the internet, getthe normal "cant connect to network"
The vice versa happens if the iMac is switched on 1st, ie the PC then cant connect.
Can anyone help? Its a Linksys router, everything works as normal, so it cant be that,
cheers

Interesting. First, turn off the router (probably unplug it). Start up one of the computers and go online. Immediately go into the network configuration and check out what IP it has received. Then start the other and try going online. Maybe restarting the router has solved the problem. If not, check out what IP that computer has received. If they aren't the same then I'm flummoxed. If they are, on the Mac, try clicking on the renew DHCP Lease button and see if you can get a different IP.

Cisco ASA 8.2, cant access internet,

Hi All,
Hope some one can help me.
I have spent the last two days trying to resolve this problem but had no luck.
When I configure the ASA5520 from scratch every thin works fine, I can access the internet and surf with out a problem. The problem is when I save the config and reload the ASA then i'm not able to access the internet.
the ASA is connected directly to a Business Grade Wireless broadband via PPOE, I have a outside network and an inside network.
I have pasted the fonfig below, have I done somthing wrong....?
ciscoasa# sh run
: Saved
ASA Version 8.2(5)
hostname ciscoasa
enable password Jv79779910k1fr encrypted
passwd 2K86079IdI.2KYOU encrypted
names
interface GigabitEthernet0/0
description CIS_Internet
nameif outside
security-level 0
pppoe client vpdn group Cis
ip address pppoe
interface GigabitEthernet0/1
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
description Internal_Local
nameif inside
security-level 100
ip address 10.10.10.1 255.255.255.252
interface Management0/0
shutdown
no nameif
no security-level
no ip address
ftp mode passive
same-security-traffic permit inter-interface
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 101 interface
nat (inside) 101 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 210.55.XX.XX 1
route inside 10.1.1.0 255.255.255.0 10.10.10.1 1
route inside 172.16.20.0 255.255.255.0 10.10.10.1 1
route inside 172.16.30.0 255.255.255.0 10.10.10.1 1
route inside 192.168.1.0 255.255.255.0 10.10.10.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 10.10.10.0 255.255.255.252 inside
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group Cis request dialout pppoe
vpdn group Cis localname [email protected]
vpdn group Cis ppp authentication chap
vpdn username [email protected] password *****
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
anyconnect-essentials
username SystemUser password Khkx/sd/vu encrypted privilege 15
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:992c963510d5f2724a1a2d
: end
ciscoasa#

Jouni
not able to receive email i am able to send but not receive.
can you please look at the config below and see if I have missed anything
ASA Version 8.2(5)
hostname ciscoasa
enable password Jv1hg0k1fr encrypted
passwd 2KFQnbNYOU encrypted
names
interface GigabitEthernet0/0
nameif outside
security-level 0
pppoe client vpdn group Cirrus_Internet
ip address pppoe setroute
interface GigabitEthernet0/1
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
nameif inside
security-level 100
ip address 10.10.10.1 255.255.255.0
interface Management0/0
shutdown
no nameif
no security-level
no ip address
boot system disk0:/asa825-k8.bin
ftp mode passive
object-group network Exchange_Server
access-list OUTSIDE-IN remark Allow SMTP
access-list OUTSIDE-IN extended permit tcp any interface outside eq smtp
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-714.bin
no asdm history enable
arp timeout 14400
global (outside) 101 interface
nat (inside) 101 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface smtp 192.168.1.205 smtp netmask 255.255.255.255
access-group OUTSIDE-IN in interface outside
route inside 10.1.1.0 255.255.255.0 10.10.10.1 1
route inside 172.16.20.0 255.255.255.0 10.10.10.1 1
route inside 172.16.30.0 255.255.255.0 10.10.10.1 1
route inside 192.168.1.0 255.255.255.0 10.10.10.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 10.10.10.0 255.255.255.0 inside
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group Telstra_Internet request dialout pppoe
vpdn group Telstra_Internet localname [email protected]
vpdn group Cirrus_Internet ppp authentication chap
vpdn username [email protected] password *****
threat-detection basic-threat
threat-detection statistics host
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username XXXXXX password Khkx/sd/vu encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c68da9839bcbaa7205a4d7babdcc6eae
: end
ciscoasa(config)#

Third Party/Android Apps Cant access Internet when connected through Data Network

hi..
when i try to access features of third party/android app though data network it shows no internet connection but when connected to wifi, it works properly.
issue is with only third party/android apps not with apps downloaded from bb world
urgent update req in this matter

Tidbits i Wonder if the FCC got things cleared up with the 700 or 800 Blocks that Law Enforcement was supposed to get i know when i sold my scanner it was gearing up to be cluster.. because who was getting what an where..i know when i listen to it some now it's way different than it was on Analog.. I miss also listening to the Railroad and hearing the Amtrak Engineers when they're coming threw here..
This post was of off topic a bit please excuse and to move back on the thread thanks Tidbits for sharing your Info! To add it's fun to use the good stuff but good stuff no matter what & were has that little price tag to go with it.. b

What does it mean when i cant access itunes on my computer?

I have the iTunes icon for a shortcut to iTunes but it wont let me access to itunes

Patience. This is user to user support forum. You need to wait for a response from someone who thinks they have something useful to offer. If your post drops off the first page without an answer then then that would be a suitable time to bump it.
Try deleting the iTunes icon from the desktop, start menu and task bar if there. Then open the Programs and Features control panel, locate iTunes, right-click on it and click repair.
If that hasn't worked then for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

During VPN connection cant access internet locally.

When I log into VPN all internet access locally apart from the VPN tunnel stops....no safari or mail.
Any ideas on how to address this...
Anything.

Wow... 5 minutes. And I thought the 30 to 45 seconds I always have are long...
Glad to hear that I could be of help and maybe also in reducing the coffee/tea/cigarettes consumption
Stefan

HT201263 my ipod is asking for passcode and its disabled now I cant access it as my computer in which I had synced it is crashed

I have ipod touch for the last two years. I had not used it for long time now, since my computer has been changed I can not synce it as its asking for passcode and its disabled now. I had not saved the password. I also can not format it. Pl help me.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps..

Cant access internet on desktop computer

Similar Messages

Maybe you are looking for