Cant access internet with 3g(n900)

hi guys,i got a replacement n900 and sent my setting to the device(three network) but it wont access the web,it does connect cos i see the two little arrows appear for connection,strangely my previous n900 worked fine,allso it works fine with wlan, any ideas, cheers

yeah it all works fine with my three sim,my previous n900 had a fault so i got it replaced but my new one wont access the web allthough the connection symbol comes up on screen to show im connected,i have allso sent the settings three times to the device but it just wont load a web page,wifi is not a prob,so im guessing this is just down to access point settings somehow,my three branded e71 wont allow me to look at the settings either,this is strange.

Similar Messages

I cant access internet with new i pad 2 , i have a netgear dgn 1000 router any ideas

i cant access internet with new ipad 2 ,i have a netgear dgn 1000 router any ideas.............

More detail please. Assuming you knew how to set up the internet connection, have you tried resetting the iPad and/or rebooting the router?
The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook.

Having trouble accessing internet with new wireless WRT54...

Having trouble accessing internet with new wireless WRT54G. Used easylink to read existing router BEFSR41 which works great to westell modem provided by Verizon. When connect new router Easylink configures WRT54G but when trying to connect to internet...fails. All lites indicate good. Not using wireless device yet, just the wired ethernet. Router set up as DHCP.
I keep going back to old router and works great every time. Help!

Thanks for response, however I tried setting unit to 192.168.2.1 (leaving DHCP) to no avail. I put my old unit (BEFSR41) back in and I'm back up. I need to sit back and decide which way to go on this. Perhaps it's defective and I should return it.

HT2534 i cant access internet in iphone 4s if i click on safari it shows cellular data could not connect what should i do now

i bought a new iphone i dont know how to operste it. i cant access internet too. what should i do now?.

Hello mskanan
Check out the article below to troubleshoot the issue of not being able to get on your cellular connection.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Regards,
-Norm G.

Full bars, 3g connected, but cant access internet

please help me, i'm using TELKOMSEL (indonesian) i have data plans, and it's 4gb, the thing is, as i said Full bars, 3g connected, but cant access internet, i tried to access google using safari, chrome, but still the same message, network not available, those things.... PLEASE HELP ME..

It sounds like a poor data connection. I get the same thing when I try to use AT&T here in my house. It shows 4G and 3 bars but I get little to no data at all. If that is what is happening to you, you can try another carrier if there is one.
Here, I can get LTE at my house and about 10-15Mbps on T-Mobile. Switching carriers can make the difference.

Computer tend to freeze when accessing internet with D-Link dir-655 router

I recently bought a D-Link dir-655 router and since then my computer tend to freeze up completely when accessing internet. This also happens when certain programs access internet. Otherwise I am usually using Internet Explorer or Opera.
I've found that there are many who experience problems with D-Link router, that they may have problems with certain network card. Anyone who can say if this is a known issues and if it there is a solution or if it is better to buy another router?
Model #: HPE-140sc
Product #: WC779AA-UUW
Software-version#: A1PNv6PrA2
PCBRAND: Pavilion

Hi, Ernst:
Would you consider backing up your files and doing a system recovery?
Maybe the OS has some corrupt registry files or something.
If you recover and then it still does that, your only choice looking at the motherboard is a PCIe gigabit ethernet adapter which would be relatively easy to install, or you could even get a USB ethernet adapter and not even have to open the case.
See if there is a setting to disable the onboard NIC if you have to add a network card.
I would rule out all software problems before buying hardware.
If you want to try some other malware program, I recommend the free Kapersky rescue disk. You burn the file to a CD and boot from it. It scans the drive and deletes any malware or virus files it finds without the PC being in windows. A lot of times viruses and malware can't be removed when windows is running.
Link to the download and instuctions for use is below. I like to use the graphic interface rather than the text interface.
http://support.kaspersky.com/faq/?qid=208282173
Paul

Remote user cant access internet

Hello there,
I have a problem with my remote vpn users. They cant acces internet after they establish vpn connection. I read about split tunnel and i think its right configured, but its not working.
Please if you have the time take a look. I attached my asa 5505 configuration
Best regards.

your split-tunneling is configured correct, but the group-policy in which this configuration is done is not applied to the tunnel-group:
tunnel-group monitoring_vpn_group general-attributes
default-group-policy monitoring_vpn_policy
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Cannot access internet with my Mac Book. Please assist!

I just installed the linksys WRT54GS router on my PC which has windows 2000. The internet works fine on that but when I try to access the internet with my MacBook, it doesn't connect at all. It says it's there but when I enter the password it says there is an error. If anyone has any idea how to fix this please let me know.

Please try to put a dollar sign ($) before the wireless password.

App cant access internet

scenario: generated app in app studio that access youtube
I installed on lumia 535 windows phone 8.1 and its ok
But when i installed(via link sent to me from app studio) the app in windows desktop 8.1 cant view the you tube video because cant access the internet
ideas?

Hi, omrfrq.
Thank you for visiting Apple Support Communities.
I understand that you are unable to connect to the internet after updating. I am not sure if you are experiencing this issue while on Wi-Fi or via the cellular data network. However, here are a couple troubleshooting articles that cover both scenarios.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network
iPhone cellular data connection issues
-Jason H.

Equium A100-027 PSAAQ - having problems accessing Internet with WLan

Just installed WXP on my Equium A100-027 (PSAAQ) as Vista did not like. Now am having problems accessing Internet. What drivers do I need to download and how do I install them?
Thanks.

Hi,
I would suggest you to check the driver site of toshiba
-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
search for your machine and download the wlan drivers. If you dont know which one you need just download all of them and install em, one of that drivers MUST work. ;)
Greets

I cant access internet through ma black berry curve.

one weak back i bought ma new blackberry curve mobile. m new to it so m facing bit problem wth ma fone.can u please tell me how can i access internet. like other phones depends n GPRS so blackberry depends on which software. plz yar help me out of dis. thank u...

Under options>advanced>tci/ip punch in your carriers APN, make sure it is also showing edge or gprs on your network bar
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed

App can access Internet with out permission

Hi,
I have installed an app from blackberry world. It does not ask for Internet access permission.
I verified that by settings - security and privacy - application permission.
But the application access the Internet!!!
How it be possible?
There is lot of apps in the application and permission section that doesn't have Internet permission accessing Internet.
Some apps are,
Xe currency. Crackberry app,...
Thanks,
Prakash

To make these changes, will you be using a Mac computer, an iPad or iPhone?
In other words, what device did you use to set up the AirPort Express originally?

Cant access internet over cellular network with new iphone 5.

Havent had an issue with my old iphone 4 that i was using until this afternoon. Received my new iphone 5 today, set it up and now it wont connect to internet etc, without being contected to wifi..
What am i missing?
Thanks

Try power-cycling your router (unplug for 15 seconds, then plug back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, and try joining your network again. Note: resetting network settings will erase passwords for previously joined networks on your phone.

Can anybody help me to access Internet with my existing network

Dear All Recently I purchased new WRT 54G wireless router. Also I have tied up with new ISP to give wireless internet access to some of the my Higher authority employees only. My office network setup is as shown below Local Ip range : 172.18.0.0 to 172.18.2.254 subnet mask : 255.255.0.0 Default gateway : 172.18.0.50 Wireless Router configured as : 1) configured all ISP settings 2) configured LAN site setting( But I had to setup lan as 192.160.1.X i.e the required by ISP ). 3) connected ISP lan port of WRT54G to cable coming from ISP Modem 4) Connected Local port( any one of 4 ports) to my existing switch(existing LAN----172.18.x.x network) Now suppose I configure user laptop to access new ISP internet through wireless.I have done following setting Wireless LAN setting : Ip address : 192.168.1.2( I can give any IP of network 192.168.1.x) subnet mask:255.255.255.0 Default gateway :192.168.1.1 DNS : Automatic I can access the new ISP internet without any problem with WRT54g router. But the problem is while accessing the new ISP internet( Using 192.168.1.x/255.255.255.0/192.168.1.1 network),Also I want to access my existing network( 172.18.0.0/255.255.0.0/172.18.0.50). Since I am very weak in routing the network, can anybody help me out to do routing setting in linksys WRT54g router so as to access my New ISP internet using existing network( 172.18.0.0/255.255.0.0/172.18.0.50). Please help me anybody

O.K. Still the crucial question remains whether you want the separation of the ISPs enforced or not, i.e. do you actively want to prevent someone to switch to the other ISP simply by reconfiguring some settings on the computer or not?
If you don't want to enforce the policy and it is enough to just use different IP settings on different computers then this would probably be the easiest solution.
If you can, install a DHCP server (e.g. on a Linux box) inside your network which does the DHCP address assignments. That way you can dynamically assign the proper addresses to the computers.
You can then assign the WRT an LAN IP address inside the 172.18 subnet. The DHCP server assigns anyone addresses inside your 172.18 subnet. However, you configure different gateway and dns server addresses depending on the computer. You configure the MAC addresses of those 'preferred' laptops the gateway address of the WRT and the public DNS servers of the new ISP. All other computers you assign the old gateway address of the old router and the DNS server addresses of the first ISP.
If you don't want to install your own DHCP server you can assign either pool static IP addresses, i.e. assign all preferred laptops static IP address including the gateway address of WRT and use DHCP only for the normal computers or vice versa.
What won't work reliably is to run two DHCP servers on both routers and connect the LAN of both together. You'll end up with computers picking up the wrong IP address from the wrong DHCP server.
Again, this separation only happens due to the different configuration of the computers. If anyone can freely reconfigure the computer he has it is easily possible to change the gateway address and thus swap the ISP. But as long as people comply with the rules it works.
If you want to enforce the separation you will have to install another router between the two gateway router. This third router passes traffic from the WRT subnet for the 172.18 subnet and accepts the return traffic. In the opposite direction the router does not forward traffic. You should even be able to use a standard NAT gateway router and hook up the internet port to the 172.18 subnet and the LAN port to the WRT. You then configure a static route on the WRT to forward packets for 172.18 subnet to the third router. If the third router does not NAT then you have to configure another route on the first router to forward traffic for WRT subnet (192.168.1.*) to the third router as well.

Using 9500 to access internet with laptop

I have a basic laptop that is not connected to the internet. Is it possible to use the 9500 to connect my laptop to the internet.

Absolutely. It is even quite straightforward and well-documented. You'll need to set up internet access on your phone first - your service provider will likely tell you how to do this.
Once that's done you'll be able to use the phone just like any old modem. But, you'll need to install drivers onto your pc first. The drivers are downloadable from this site, and are also included in the PC Suite application (also downloadable from this site). In order to connect the phone and the laptop together you have a choice of what technology to use. The choices are bluetooth (good - phone needs to be in same room as laptop), infrared (not quite so good - phone needs to be within a foot or so of the laptop and the Infrared ports on both laptop and phone need to be in line-of-sight with each other) or using the usb cable that came with the phone (good, except you need to carry the cable with you). I seem to remember that the PC Suite application takes a lot of the pain out of setting all this stuff up for you. Plus the phone manual (again, downloadable from this site) will help. One final thing - if you're planning on using the phone just to dial up your ISP, you're talking very slow connection speeds. It might be worth looking at gprs or edge. You don't need to do anything with the phone, just talk to your cellular service provider to get the service enabled. HTH, Pete

Cant access internet with 3g(n900)

Similar Messages

Maybe you are looking for