Cant access my itnues cause it claims it was reintstalled wrong

my itunes wont open cause stupid itunes claims it was not reinstalled correctly ive dealt with this stupid excuse so many times

This link will help you. https://support.apple.com/kb/ht1212
If you get to the point your iPad is fully disabled, you'll need recovery mode:
http://support.apple.com/kb/ht1808

Similar Messages

I can not access my itunes because a "c file" was loaded wrong.

It says I should reinstall Itunes, and I have numerous times. but nothing has worked.
I tried to "fix" every part of the apple support things but they will begin and state that I do not have access to itunes. I dont understand.
The itunes support also says to go in through your files and look for two certain files, and the files dont exist on my laptop. what do i do?

Doublechecking. Have you worked through the following user tip?
Troubleshooting issues with iTunes for Windows updates

I cant access time capsule hard drive.

I cant access time capsule hard drive. Everything was working before but all of a sudden i get an error msg when double clicking on my network drive which states ' The local device name is already in use'. The time capsule wireless network works fine though. I am using Vista 64.

Reboot the entire network.. everything must go off.. all stuff off.
Restart in order.. modem.. router.. TC (maybe also working as router).. other network stuff.. clients.
Can vista now open the disk?
If not try doing it manually.. in windows explorer type the TC address \\10.0.1.1 for instance.. whatever IP it has. I just used default as example.
If no good, open the airport utility which I hope you have installed.
Make sure the TC name is short no spaces pure alphanumeric.
Make sure workgroup is correct and guest access is on with read and write permissions.
If still no good.. press and hold the reset.. redo the setup.
Later TC firmware is useless for windows users.. the best was 7.5.2 which you should go back to.
Do you have other clients using the TC? Are they all ok?
vista.. shudder.. has one virtue.. it made me give up windows and move to Mac OS.

I cant access my itunes account cause i cant get into my old email

I guess I have 2 itunes accounts... I can get into one account but i dont remeber the password to my old account that i bought all my apps on.... I cant redo my passward cause i dont know the secert password or get into email that it would send it to... Can anyone help plz????????????

Can you reset your password to your email address??

BT infinity installed and cant access secure sites...

Had BT Infinity installed last Friday and now cant access secure sites such as my Bank to check my account or Credit Card site to check latest outgoings. My laptop accesses but PC doesnt using the same router. Any suggestions please.
Solved!
Go to Solution.

Seen this hundreds of times, the most likely cause is CMOS battery in your PC running flat, it means that whenever you unplug your PC it loses the date and time.
SSL certificates are valid for date periods and your PC things it's not in that date period.
First thing to check is your Date/Time

I cant access my facebook through my iphone and ipad but i can access it through my friend's laptop

i cant access my facebook through my iphone and ipad but i can access it through my friend's laptop

Facebook has a feature that requires you to authorise a new device, which could be causing an issue. Check your account settings when you're signed in on the computer, and see if it has anything along the lines of 'App Passwords'

I got ipod in a public toilet but no one is there to ask who owns it. it has pass code so i cant access her/his info. so i decided to keep it and use it. i want to reset the passcode. do you think they can track it and know whos using it?

i got ipod in a public toilet but no one is there to ask who owns it. it has passcode so i cant access her/his info. so i decided to keep it and want to use it. i want to reset the passcode so that i can change the settings. do you think they can track it and know whos using it?

Hand it to the police and if nobody claims it maybe they will let you have it. The person who loss it will be grateful.

Cant access local PC Network shares

On the highly filtered network that I connect to at a University this does not work.
I do the following in the finder.
1. Go menu
2. network command
Nothing shows up.
However last Saturday I was able to browse network shares using this method.
I emailed IT and they do not know whats up. Perhaps they have this service filtered, yet enabled on Windows, as I can use Dave to access network shares. However Dave costs moneya nd why I uninstalled it.
Can anyone tell me whats up and what I should email to IT? I emailed them this morning and sent themn a screenshot and they claim they need more ifnormation. But all I gave them is that I cant access network shares and told them that last saturday I could.
John

You cannot easily do this. If your app is delivered via a web
domain, then you cannot access both network and local assets.
The only way to do what you ask is to physically install the
application in a trusted folder.
See this doc:
http://livedocs.adobe.com/flex/2/docs/00001953.html
and this for details on hot to set it up:
http://livedocs.adobe.com/flex/2/docs/00001952.html
Tracy

GTX590 Cant access NVIDIA control panel Black screen after 10 mins

Hi,
I recently purchased an MSI GTX590 and encountered this problem " Cant access NVIDIA control panel Black screen after 10 mins". I am running Windows7 Ultimate SP1.
I did have an xfire setup of 2xHD6970's, I uninstalled all the old drivers then used driver sweeper to clean out any remaining folders, also uninstalling them from device manager.
Next I installed the latest version of drivers from the NVIDIA site only to find that I am stuck in safe mode resolutions for my screen I cant access the NVIDIA control panel as it is saying " You are not currently using a display attached to an Nvidia GPU ". In device manager it states that
"Windows has stopped this device because it has reported problems. (Code 43) ".
I have now uninstalled and reinstalled about 6 different versions of drivers from NVIDIA including the latest BETA drivers which all have the same issue??????
I have also gone to the MSI site and downloaded their latest recommended drivers for the GTX590 NVIDIA Graphics Drivers Version 267.91 which are the only ones that seem to work as in it fixes the screen to the proper resolution and lets me into the NVIDIA control panel yet after about 10-15 mins the screen will go black or the computer will just freeze. Rebooting causes the same issue after 10-15mins
I have noticed a few others out there experiencing the same problem but no fixes as of yet any ideas??

Thankyou for the reply,
Tested the card in another working machine capable of running and its fine I am sure the PSU I have is more than capable of running this card I ran 2 6970's in xfire on the same PSU and motherboard with no problems.
I am running it on an 40"BRAVIA LCD and am using the DVI to HDMI converter that came with the GTX590 and I have also tried it with an DVI to HDMI cable also.
The system is stable under the latest NVIDIA drivers but the display drivers aren't recognized under device manager and the screen resolution is still stuck in the safe mode size, they are shown up as having the same "error 43" and I still can't get access to the NVIDIA control panel.
I strongly believe this is a driver issue or an issue relating to software within windows. To give you a rundown on several things that I have tried to isolate or fix the issue with is in a list here:
1. Installed every different version of drivers on an fresh install of windows7 including the latest Beta drivers
2. Tried to run the GTX590 on another machine and it runs using windows7
3. Run different graphics card setup using the same PSU RAM and mb on windows7 no problems.
4. Run the gfx card on only 1 gpu no change.
5. Last step I will take is to install Windows7 without the SP1 as I have read elsewhere that similar problems have been fixed by doing this if that don't work might just sell my soul to the devil n see if he can fix it lol.

I'm using a macbook and recently cant access my Hotmail account. Normally it comes up as my home page. The address bar shows what looks like my account but a blank screen. Help

Question
I'm using a macbook and recently cant access my Hotmail account. Normally it comes up as my home page. The address bar shows what looks like my account but a blank screen.
I have disabled Silverlight after seeing that suggested somewhere. That didnt help.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
See also:
* [[Troubleshooting extensions and themes]]

Asa 5505, the outside cant access to a server in the inside

hi, i have an Asa 5505, a pc in the outside with the ip 10.1.1.6 cant access to a server in the inside 192.168.1.4, pls help...
this is my conf:
ASA Version 8.0(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 0
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 10.1.1.2 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa804-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list 100 extended permit tcp any host 10.1.1.3 eq www
pager lines 24
logging enable
logging asdm debugging
mtu inside 1500
<--- More --->
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-613.bin
no asdm history enable
arp timeout 14400
nat-control
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 10.1.1.3 192.168.1.4 netmask 255.255.255.255
access-group 100 in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
<--- More --->
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.1.2-192.168.1.254 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
<--- More --->
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:14e7b74fabc386613ae646b915f60e9e
: end
ciscoasa#

Andres
The security level for your inside interface should be 100 ie.
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
After changing that can you
1) ping the outside interface of the ASA from the pc or ping the PC from the ASA
2) I'm assuming you are trying to connect to 10.1.1.3 when you attempt the connection ?
Jon

Why i cant access asa 8.4 thruogh asdm from outside interface ???

hi all ,
plz help e why i cant access asa asdm from outside interface
my puclic ip on outisde is :
x.x.55.34
i changed portf of asdm to 65000 because i have portforward ,
i tried to connect to my ip thriuogh asdm bu :
x.x.55.34
x.x.55.34:65000
but no luck ,
it succed if i try to connect locally
here is my sh run command :
====================================================
ASA5505#
ASA5505# sh run
: Saved
ASA Version 8.4(2)
hostname ASA5505
enable password qsddsEGCCSH encrypted
passwd 2KFsdsdbNIdI.2KYOU encrypted
names
interface Ethernet0/0
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 2
interface Vlan1
nameif ins
security-level 100
ip address 10.66.12.1 255.255.255.0
interface Vlan2
nameif outside
security-level 50
ip address x.x.55.34 255.255.255.248
boot system disk0:/asa842-k8.bin
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-0.0.0.0
host 0.0.0.0
object network localsubnet
subnet 10.66.12.0 255.255.255.0
description localsubnet
object network HTTP-Host
host 10.66.12.249
description web server
object network HTTPS-HOST
host 10.66.12.249
description Https
object network RDP-Host
host 10.66.12.122
description RDP host
object network citrix-host
host 10.66.12.249
description citrix
object service rdp
service tcp destination eq 3389
object service https
service tcp destination eq https
object service citrix
service tcp destination eq 2598
object service http
service tcp destination eq www
object network RDP1
host 10.66.12.249
object network HTTPS-Host
host 10.66.12.249
object network CITRIX-Host
host 10.66.12.249
object-group network RDP-REDIRECT
object-group network HTTP-REDIRECT
object-group network HTTPS-REDIRECT
object-group network CITRIX-ICA-HDX-REDIRECTION
object-group network CITRIX-ICA-SESSION-RELIABILITY-REDIRECTION
object-group service CITRIX-ICA-HDX
object-group service CITRIX-SR
object-group service RDP
object-group network MY-insideNET
network-object 10.66.12.0 255.255.255.0
access-list outside_in extended permit tcp any host 10.66.12.249 eq www
access-list outside_in extended permit tcp any host 10.66.12.249 eq https
access-list outside_in extended permit tcp any host 10.66.12.249 eq 2598
access-list outside_in extended permit tcp any host 10.66.12.122 eq 3389
access-list outside_in extended permit tcp any host 10.66.12.249 eq citrix-ica
access-list outside_in extended permit tcp any host x.x.55.34 eq 65000
access-list outside_in extended permit tcp any host x.x.55.34 eq https
access-list outside_in extended permit ip any any
pager lines 24
mtu ins 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645.bin
no asdm history enable
arp timeout 14400
object network localsubnet
nat (ins,outside) dynamic interface
object network HTTP-Host
nat (ins,outside) static interface service tcp www www
object network RDP-Host
nat (ins,outside) static interface service tcp 3389 3389
object network HTTPS-Host
nat (ins,outside) static interface service tcp https https
object network CITRIX-Host
nat (ins,outside) static interface service tcp citrix-ica citrix-ica
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 62.109.55.33 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable 65000
http 10.66.12.0 255.255.255.0 ins
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
    308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
    0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
    30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
    13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
    0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
    20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
    65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
    65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
    30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
    30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
    496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
    74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
    68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
    3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
    63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
    0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
    a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
    9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
    7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
    15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
    63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
    18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
    4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
    81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
    db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
    7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
    ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
    45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
    2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
    1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
    03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
    69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
    02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
    6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
    c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
    69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
    1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
    551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
    1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
    2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
    4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
    b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
    6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
    481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
    b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
    5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
    6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
    6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet 0.0.0.0 0.0.0.0 outside
telnet timeout 5
ssh timeout 5
console timeout 0
management-access outside
dhcpd address 10.66.12.160-10.66.12.180 ins
dhcpd dns 212.112.166.22 212.112.166.18 interface ins
dhcpd enable ins
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username test password P4ttSdddd3SV8TYp encrypted privilege 15
username ADMIN password 5dddd3ThngqY encrypted privilege 15
username drvirus password p03BtCddddryePSDf encrypted privilege 15
username cisco password edssdsdOAQcNEL encrypted privilege 15
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD
CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: end

For access over VPN you need:
management-access inside
and don't forget:
ssh inside
http inside
I'm guessing you forgot to grant ASDM (http/https) access to the IP addresses used by the VPN? Can you SSH? If not, that is your problem to solve first.

Cant access to the integrated web browser RG60SE

Hi. I recently bought a RG60SE router. Following the instructions in the quick manual i tried to configure it, but i cant access to the integrated web based configuration utility. I tried access from three diferent pcs with same results. I tried to access connecting only the router and one PC, without ADSL modem, but not results.
I tried to reset, plug, unplug, power off, power on, the PC and the router, in many combinations, but i have zero results.
Im very frustrated, may be im doing something wrong?
I have a one desktop directly connected to ADSL modem:
IP 192.168.1.2
Mask 255.255.255.248
Gate 192.168.1.1
DNS1 200.105.128.40
DNS2 200.105.128.41
Please, i need help,
Thanks

Thanks for your answer:
Yes i am using http://192.168.1.1
I have an another router D-link dir-400. When this router is resetted, i can see a d-link wireless signal within my notebook. But i can not see anything about MSI router.

I cant access firefox, everytime i try i get that windows can't find the file, i tried redownloading it but it still gave me the same message?

i cant access firefox, everytime i try i get that windows can't find the file, i tried downloading it again but it still gave me the same message. the problem has nothign to do with my internet because it wonks on internet explorer and everythign is fine, my computer just can't access firefox for some reason. i tried uninstallign ti adn then installing it again, but that didnt work, i tried installing a different version and it still didnt work.
okay the exact message is" Windows cannot find 'C:\Program Files\Mozilla Forefox 4.0 Beta 1\firefox.exe'. make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.
Nothing happens after i install is the "Launch Firefox now" checkbox set, the same message comes up.
i usually start firefox from the shortcut i have on my desktop but when this happened i thought that the shortcut is the problem, but i went to the Mozilla firefox folder and tried it from there, but it didnt work. i also tried downloading different versions of firefox but that didnt work either.

can you tell me the solution to "windows cant find firefox" error. thanks.

I cant access the root share of a windows server after upgrading to mountain lion

Hi Guys,
Since upgrading to mountain lion i cant access the shared drives on our windows server. For example in a windows machine if i go to run the type \\server\ i get all the visible shares available. in my previous version i was able to do the same (obviously i would authenticate with my AD account). now when i try to access those same shares i get the message below:
"The operation cant be completed becuase the original item for "/" cant be found"
I can however connect to the shares directly for example if i connect to server path \\server\data it works ok.
I have verified my account details and they are ok - i have also disconnected and reconnected the connection.
This was working fine before the upgrade. can anyone help??

well iv just managed to get to 35 gig free (just deleting iphone backups) and im now able to get past the next screen on bootcamp.
unfortunatly its only allowing me to create a new partition not delete the current.
this is leading me to think the old ones master partition has become damaged and the hard drive dosent know it exists any more.
if this is the case (please tell me im wrong though) what options do i have as i dont want to / have the money to buy another hard drive to back everything up to it with.
thanks again
gareth

Cant access my itnues cause it claims it was reintstalled wrong

Similar Messages

Maybe you are looking for