Cant access one web site!!! Help.
Suddenly cant access a forum I have been using for years.
Have cleared cookies, history and just about everything that can be cleared.
Tried on Safari, Firefox and also a cheapo Dell with XP on Firefox, IE etc...
Friends can access the site. It is a very small site and the owner hasnt made an appearance since...
This happened a month ago. I was able to get on with a proxy. Once on with the proxy something happened and I was able to access the site without the proxy but this time I can access the site with the proxy but cant sign in with the proxy as was able to do last month...
Any suggestions to get back onto the normal setting? I am on DSL with Verizon. Dell is hard wired and MBP is airport... I get either a blank page or a page cannot be found message.
thanks for any suggestions.
Thank you for the response... yes, I knew it was all gonna be a bit confusing, sorry.
At least I learned something... I wasnt aware of Safaris Proxie settings. I was using a web based free proxie: xroxy.com which in the past not only allowed me to gain entrance to the home page and log in and after that the site worked without the proxy site???
This time xroxy.com allows me into the home page but cant log in. Again, this is both on the MBP with Safari & Firefox and a Dell with XP with Firefox, IE & just tried Windows Safari. I enter my login info, it shows the thank you for logging in and then a blank page.
If I try without the proxy site I simply get a blank page - no home page, no login page, NOTHING. Earlier yesterday I was getting a "server is too busy at the moment" page or the page cannot be found. Again, NOW nothing, just a white/blank page!
In the Safari Proxy setting everything is as you describe. Nothing is checked in either the Manual or PAC sections except for this *.local, 169.254/16 in the "Bypass proxy settings for these Hosts & Domains. Should I keep this as is or remove it?
If there is nothing else to do with the setting of the MBP & browsers or Dell XP & browsers the next step will be to contact Verizon and ask about setting the router..
Any other suggestions? Please!!!
thanks
frank
Similar Messages
-
I can only access one web site . www.cisco.com. I am connected to the internet via a lynksys DSL Router, I am using dhcp and NAT from the Lynksys note:works fine for 3 other windows based pc's.
when I try to connect to any other site the page Hangs during load and neve displays.
I can ping all of the web sites that do not come up
I am using a SunBlade 100 and did a new install. I tried the install with webstart and had the same result during the install. again I can only open sucessfully www.cisco.com.Hello!
I am getting this error, but the above fix does not solve the issue, however I do know what has caused it.
I have an edmx file in a WCF webservice which feeds a silverlight app. The edmx is quite complex and a bit fragile, but was working fine up until I introduced our Industry Codes view into the model. The view is basically { ID, ParentID, Name, ... }. In my model I have created an association to itself which describes Children(*)/Parent(0/1) so I have a nice and tidy hierarchical structure. The edmx and the service build without any errors - hurrah! However, when I update the service reference I then get the below error (and a whole load of others as none of the webservice objects exist anymore):
Error 21 Custom tool error: Failed to generate code for the service reference 'WCF_ContactAdmin'. Please check other error and warning messages for details. X:\2008-054 ContactAdmin_Silverlight\Contact2_Admin_Silverlight\Service References\WCF_ContactAdmin\Reference.svcmap 1 1 Contact2_Admin_Silverlight
When I try the fix mentioned in the link above this error disappears, but then so do all the objects in the datamodel, so I cannot continue from there.
Having the hierarchical data objects defined in the EDM will make like so much easier in future, any help will be greatly appreciated, thank you!!
Tim
Web Developer at Terrapinn -
I can browse the web perfectly with OS X 10.5.7 and Safari 4.0.2 except for one site - Northumberland County Council. Using both Safari and Firefox I just get 'Loading...' for several minutes then the message:
"Safari can’t open the page “http://www.northumberland.gov.uk/” because the server where this page is located isn’t responding."
I can access this site fine from my work pc using IE or Firefox. I have asked for advice on my ISP's forums, but because the site seems to work fine for others am not getting anywhere. I would appreciate any advice on where I should start looking for the problem.
I have an Intel Mac mini connected to the internet with a Thomson TG585 router.Thanks sitspotsit, it seems to work fine from every computer except this one
I did add the OpenDNS servers a couple of days ago hoping that would fix it, but no change I'm afraid.
I assume I'm correct in adding them to my Airport/Advanced/DNS settings as I connect wirelessly to my router and don't use the ethernet? -
Hi, problem occurs when I'm clicking a button or a new url on the current site. For instance, when i clicked that "Ask This" button on this web site, It redirects me to the default homepage. I cant go back and I'm losing the previous web site HELP PLEASE!
Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
Just in the past week, when I try to access many web sites, including PayPal and Capital One, I get a Untrusted Connection screen and it prevents me from entering these sites.
hello ra12rick, first please make sure that the date, time & timezone are set correctly on your system. if this doesn't solve the issue (or it is already set properly), a possible solution depends on different factors:
* what is the '''error code''' shown under ''technical details'' on the error page?
in case the error code equals ''sec_error_unknown_issuer'', please attempt to add an exception on the bottom of the error page & inspect the certificate (see the screenshot attached for instructions):
* which '''issuer information''' does the certificate contain?
thank you! -
Up until two months ago I was able to access this one web site (www.melaleuca.com). It is a site that I order from monthly. When I type the address in I get a screen saying "the connection was reset while the page was loading". I called their tech support & of course it's never their fault, it must be my computer! NOT! I go on financial trading and banking web sites that are super crypted, so it's not my computer. The tech support said that their web site only works with Firefox 3.0. I told them that was dumb! My other theory is that one of those insidious "upgrades" that Microsoft is always doing changed something, but they're never going to admit to it. I can access the web site on my iPhone, but that is tedious. Help!
I'm sorry I don't have an answer to your problem, but I wrote to them also to get back the old Firefox, where Google was there. I lost one of my toolbars with certain
bookmarks, this is a major headache. If you get any info. I would like it if you could let me know and I will do the same. [email protected] -
hello,
i downloaded some iWeb templates and installed them. they work so far.
but since i added those templates i cant do several things:
-i cant create a blank web-site
-i cant create any web-site with my other user accounts
i got 3 users on my mbp. only 1 user allows me to create new web-sites. if i log in with another user (i also tried to create a new user) then i only get a grey + in the lower left corner of my iWeb. grey means i cant click it.
i deleted iweb preferences already. what else can i do to solve that?
is it a good idea to delete iweb from aplication folder and install it again? is there a full installer?
thx 4 any help, ichiCan you do this in some user accounts and not others, as the case for the original poster, or is this a problem across the board?
If all the controls are greyed out, the easiest potential fix is to open iPhoto, select some pictures/and or an album there and click on the iWeb button at the bottom of the iPhoto window. This should "force" iWeb to create a photo page.
It that doesn't work, you will need to try to download one of the iWeb upgrades. Which version of iWeb are you using? -
Storing multiple passwords for one web site
I go to one web site that I have over 30 different user accounts that I access. Is there a way to have Firefox remember all of the user account login and passwords?
You may be able to do that with the LastPass add-on https://addons.mozilla.org/en-US/firefox/addon/lastpass-password-manager/
I don't know about the maximum but it does support multiple info for the same domain / URL. Please note that the app is basically a secure online backup solution for passwords and whatever is created is mirrored to an online backup site. -
How to show data from one web site to other web site having diffrent domain.
Dear all,
i want to show the selected data from one web site to other web site.
the location of the two web site is geographically seprated (and diffrent domain)
Please tel me in how many ways it can be accomplished.
If it can be done using jquery then please tel me the function or procedure to do it.
Note: ( i have seen the above behavior in many web sites .
like, i was purchasing some thing but finally declined,
after that i visited some other web sites to gets some other data on other area
, and i show my selected items of the first web site on second website as advertisement.)
i would like to know how these things are accomplished and how it can be done in asp.net.
yours sincerelyHello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Safari Does Not Allow Access to Web Sites With Wildcard X.509 Certificates
I'm really getting irritated with the Safari browser in OSX Mavericks. One of the more irritating features involves the inability to access web sites that use improperly constructed wildcard X509 certificates. By improperly constructed, I mean that the X.509 certificate does not contain the host name of the system being accessed in the Subject Alternate Name list.
Earlier versions of Safari would, at least, allow me to examine the X.509 certificate and determine whether I wanted to proceed with the connection. The current version of Safari doesn't provide that option. It simply displays a screen stating that it can't establish a secure connection to the web site. If you actually have a need to access the web site, you need to use a web browser like Firefox.
What's really irritating about this is that Safari had improved to the point where it was reliable enough to be used as the default browser.
Is there a Safari.plist setting that will allow me to change the behavior of Safari when it encounters an improperly constructed X.509 certificate and provide me the opportunity to examine the certificate to decide whether to proceed or not?Hi
Have a look in your Networks panel in System Preferences. Click on the Advanced button, then Proxies. There may be an errant proxy present blocking the site load. -
Can't access some web sites with safari
Can't access financial web site since time before last of safari update. Any help?
In my original post, not today's, I had said I was having the issues on the Mini, running OSX 10.6.8 and Safari v.5.1.5 for my bank's pill pay. I should have been more specific as to which machine and OSX Safari browser I'm having the T-Mobile problem with. My mistake.
It is on both the MacMini and now the Air too. A moment ago, I was able to log in to my.t-mobile.com on the Air, but after putting into my Bookmarks folder, I can't do it anymore. The Log in button comes up greyed out instead of green.
I'm also still having trouble with my bank's bill pay section on both computers too.
I wonder if it's related to the saving of the log in info or putting in the Bookmark Folder? -
I am using ipad 2, Wi-Fi is connected but cant open any web-site " error : safari cannot open the page becasue it is not connected to the internet "
need support pleaseYou haven't provided much information, such as what type of router you have? If you entered the encryption key as the password as opposed to the router name you have selected? If you have WEP or WPA? What you've tried that didn't work, other than saying it doesn't work? So, below is a link to some assistance. Follow this and see if it helps you.........
http://www.apple.com/support/ipad/assistant/wifi/ -
Since I updated my IPad software to iOS 5.0.1 from 5.0, I cannot access some web sites. How can I go back?
Sorry, you cannot downgrade iOS software.
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appear. Let go of the buttons and let the iPad restart. See if that fixes your problem. -
I cant save for web - please help me?!
I cant save for web - please help me?!
It says:
"Could not complete this operation. An unknown operating system error has occurred." -
What event handling code do I need to access a web site ?
Hello
I am doing a GUI program that would go to a program or a web site when a button is clicked. What event handling code do I need to add to access a web site ?
for instance: if (e.getSource() == myJButtonBible)
// go to www.nccbuscc.org/nab/index.htm ? ? ? ? ? ? ?
} below is the drive class.
Thank you in advance
import java.awt.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import java.awt.event.*;
import javax.swing.JEditorPane.*;
public class TryGridLayout
public TryGridLayout() {
JFrame myJFrame = new JFrame("Choose your program");
Toolkit myToolkit = myJFrame.getToolkit();
Dimension myScreenSize = myToolkit.getDefaultToolkit().getScreenSize();
//Center of screen and set size to half the screen size
myJFrame.setBounds(myScreenSize.width / 4, myScreenSize.height / 4,
myScreenSize.width / 2, myScreenSize.height / 2);
//change the background color
myJFrame.getContentPane().setBackground(Color.yellow);
//create the layout manager
GridLayout myGridLayout = new GridLayout(2, 2);
//get the content pane
Container myContentPane = myJFrame.getContentPane();
//set the container layout manager
myContentPane.setLayout(myGridLayout);
//create an object to hold the button's style
Border myEdge = BorderFactory.createRaisedBevelBorder();
//create the button size
Dimension buttonSize = new Dimension(190, 100);
//create the button's font object
Font myFont = new Font("Arial", Font.BOLD, 18);
//create the 1st button's object
JButton myJButtonCalculator = new JButton("Calculator");
myJButtonCalculator.setBackground(Color.red);
myJButtonCalculator.setForeground(Color.black);
// set the button's border, size, and font
myJButtonCalculator.setBorder(myEdge);
myJButtonCalculator.setPreferredSize(buttonSize);
myJButtonCalculator.setFont(myFont);
//create the 2nd button's object
JButton myJButtonSketcher = new JButton("Sketcher");
myJButtonSketcher.setBackground(Color.pink);
myJButtonSketcher.setForeground(Color.black);
// set the button's border, size, and font
myJButtonSketcher.setBorder(myEdge);
myJButtonSketcher.setPreferredSize(buttonSize);
myJButtonSketcher.setFont(myFont);
//create the 3rd button's object
JButton myJButtonVideo = new JButton("Airplane-Blimp Video");
myJButtonVideo.setBackground(Color.pink);
myJButtonVideo.setForeground(Color.black);
// set the button's border, size, and font
myJButtonVideo.setBorder(myEdge);
myJButtonVideo.setPreferredSize(buttonSize);
myJButtonVideo.setFont(myFont);
//create the 4th button's object
JButton myJButtonBible = new JButton("The HolyBible");
myJButtonBible.setBackground(Color.white);
myJButtonBible.setForeground(Color.white);
// set the button's border, size, and font
myJButtonBible.setBorder(myEdge);
myJButtonBible.setPreferredSize(buttonSize);
myJButtonBible.setFont(myFont);
//add the buttons to the content pane
myContentPane.add(myJButtonCalculator);
myContentPane.add(myJButtonSketcher);
myContentPane.add(myJButtonVideo);
myContentPane.add(myJButtonBible);
JEditorPane myJEditorPane = new JEditorPane();
//add behaviors
ActionListener myActionListener = new ActionListener() {
public void actionPerformed(ActionEvent e) throws Exception
/*if (e.getSource() == myJButtonCalculator)
new Calculator();
else
if (e.getSource() == myJButtonSketcher)
new Sketcher();
else
if (e.getSource() == myJButtonVideo)
new Grass();
else*/
if (e.getSource() == myJButtonBible)
// Go to http://www.nccbuscc.org/nab/index.htm
}; // end of actionPerformed method
//add the object listener to listen for the click event on the buttons
myJButtonCalculator.addActionListener(myActionListener);
myJButtonSketcher.addActionListener(myActionListener);
myJButtonVideo.addActionListener(myActionListener);
myJButtonBible.addActionListener(myActionListener);
myJFrame.setVisible(true);
} // end of TryGridLayout constructor
public static void main (String[] args)
new TryGridLayout();
} // end of TryGridLayout classHello
I am doing a GUI program that would go to a program or a web site when a button is clicked. What event handling code do I need to add to access a web site ?
for instance: if (e.getSource() == myJButtonBible)
// go to www.nccbuscc.org/nab/index.htm ? ? ? ? ? ? ?
} below is the drive class.
Thank you in advance
import java.awt.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import java.awt.event.*;
import javax.swing.JEditorPane.*;
public class TryGridLayout
public TryGridLayout() {
JFrame myJFrame = new JFrame("Choose your program");
Toolkit myToolkit = myJFrame.getToolkit();
Dimension myScreenSize = myToolkit.getDefaultToolkit().getScreenSize();
//Center of screen and set size to half the screen size
myJFrame.setBounds(myScreenSize.width / 4, myScreenSize.height / 4,
myScreenSize.width / 2, myScreenSize.height / 2);
//change the background color
myJFrame.getContentPane().setBackground(Color.yellow);
//create the layout manager
GridLayout myGridLayout = new GridLayout(2, 2);
//get the content pane
Container myContentPane = myJFrame.getContentPane();
//set the container layout manager
myContentPane.setLayout(myGridLayout);
//create an object to hold the button's style
Border myEdge = BorderFactory.createRaisedBevelBorder();
//create the button size
Dimension buttonSize = new Dimension(190, 100);
//create the button's font object
Font myFont = new Font("Arial", Font.BOLD, 18);
//create the 1st button's object
JButton myJButtonCalculator = new JButton("Calculator");
myJButtonCalculator.setBackground(Color.red);
myJButtonCalculator.setForeground(Color.black);
// set the button's border, size, and font
myJButtonCalculator.setBorder(myEdge);
myJButtonCalculator.setPreferredSize(buttonSize);
myJButtonCalculator.setFont(myFont);
//create the 2nd button's object
JButton myJButtonSketcher = new JButton("Sketcher");
myJButtonSketcher.setBackground(Color.pink);
myJButtonSketcher.setForeground(Color.black);
// set the button's border, size, and font
myJButtonSketcher.setBorder(myEdge);
myJButtonSketcher.setPreferredSize(buttonSize);
myJButtonSketcher.setFont(myFont);
//create the 3rd button's object
JButton myJButtonVideo = new JButton("Airplane-Blimp Video");
myJButtonVideo.setBackground(Color.pink);
myJButtonVideo.setForeground(Color.black);
// set the button's border, size, and font
myJButtonVideo.setBorder(myEdge);
myJButtonVideo.setPreferredSize(buttonSize);
myJButtonVideo.setFont(myFont);
//create the 4th button's object
JButton myJButtonBible = new JButton("The HolyBible");
myJButtonBible.setBackground(Color.white);
myJButtonBible.setForeground(Color.white);
// set the button's border, size, and font
myJButtonBible.setBorder(myEdge);
myJButtonBible.setPreferredSize(buttonSize);
myJButtonBible.setFont(myFont);
//add the buttons to the content pane
myContentPane.add(myJButtonCalculator);
myContentPane.add(myJButtonSketcher);
myContentPane.add(myJButtonVideo);
myContentPane.add(myJButtonBible);
JEditorPane myJEditorPane = new JEditorPane();
//add behaviors
ActionListener myActionListener = new ActionListener() {
public void actionPerformed(ActionEvent e) throws Exception
/*if (e.getSource() == myJButtonCalculator)
new Calculator();
else
if (e.getSource() == myJButtonSketcher)
new Sketcher();
else
if (e.getSource() == myJButtonVideo)
new Grass();
else*/
if (e.getSource() == myJButtonBible)
// Go to http://www.nccbuscc.org/nab/index.htm
}; // end of actionPerformed method
//add the object listener to listen for the click event on the buttons
myJButtonCalculator.addActionListener(myActionListener);
myJButtonSketcher.addActionListener(myActionListener);
myJButtonVideo.addActionListener(myActionListener);
myJButtonBible.addActionListener(myActionListener);
myJFrame.setVisible(true);
} // end of TryGridLayout constructor
public static void main (String[] args)
new TryGridLayout();
} // end of TryGridLayout class
Maybe you are looking for
-
Help-- and running out of time, too!
Oh boy, I just spent several hours loading music, tweaking playlists on my iPod, all geared up ahead of leaving on a three week trip tomorrow AM, and NOW, something's messed-up. Just have the grey-shaeded Apple logo, it will not show a menu, stays da
-
Best way to manage digital signing on Active Directory environment?
Hi, I have created a couple of interactive documents and they have signature fields for the staff. Some documents have multiple signature fields. At the moment staff signing the document and emailing his/her supervisor and supervisor saving as this d
-
Hello, i lost my iphone5 32gb and i want to track it but the thing is that in my iphone5 i did not setup the find my iphone application :'( ...so, is there any option where i can track my phone or block it that nobody can use it..please help me out
-
How can i retrieve my passcode for restrictions if i forgot it
need help to retrieve passcode for restrictions
-
Hi All, Is it possible to search all the columns of a table with particular value(without using or functionality in query)? For ex. I have multiple columns(contains more than 10 values) in a table. IFE_ID Locale Name Cate Movid F Y S SubCate ife_deta