Cant access quicktime control panel

I may be stupid or somethin, but I can't find the **** quicktime control panel to upgrade to the pro version.
I looked through my computer's control panel, there is only one user on it, but it looks like there is also an old administrator user there too.
There isn't anything about quicktime in my control panel, and I looked through the quicktime files in the c drive and didn't see anything about a control panel there either. Somebody got an idea? Because I just spent a worthless 39 dollars, and am seriously considering making the switch to linux.

Thanks. I do have a lot of appreciation for the macintosh-expecially since they came out with the os x. There's no doubt about it, it will be my next computer. If only I could get one at work.
But until I can afford that new computer, it's easy to convert my windows machine into that friendly linux that I'm getting used to.
There's no mistaking that Apple is the best in the business. But with windows, it's always one thing after another. I bought a new computer a year ago, the one I had lasted me 6 years, was expecting this one to do the same. But alas, a few viruses later it was toast. HP didn't give me the software to start over, so I had to do a system restore. Needless to say I don't have time to dig through my entire hard drive deleting the remains of the virus. But hey-no problem, because I have another one on there now.
And AIM is causing some wierd things to happen with the ui, among many other problems I constantly have.
So, instead of buying a new version of windows xp, which I can only re-install twice, I'm switching to my friendly linux. Then when I can, it's apple.
I really think the only reason people don't switch to the mac is because the first time you use it, it's different enough to be confusing or even frustrating. But after the first week, anybody should be using one with confidence. Some people might need some kind of tutorial or something.
hp a1010y Windows XP

Similar Messages

GTX590 Cant access NVIDIA control panel Black screen after 10 mins

Hi,
I recently purchased an MSI GTX590 and encountered this problem " Cant access NVIDIA control panel Black screen after 10 mins". I am running Windows7 Ultimate SP1.
I did have an xfire setup of 2xHD6970's, I uninstalled all the old drivers then used driver sweeper to clean out any remaining folders, also uninstalling them from device manager.
Next I installed the latest version of drivers from the NVIDIA site only to find that I am stuck in safe mode resolutions for my screen I cant access the NVIDIA control panel as it is saying " You are not currently using a display attached to an Nvidia GPU ". In device manager it states that
"Windows has stopped this device because it has reported problems. (Code 43) ".
I have now uninstalled and reinstalled about 6 different versions of drivers from NVIDIA including the latest BETA drivers which all have the same issue??????
I have also gone to the MSI site and downloaded their latest recommended drivers for the GTX590 NVIDIA Graphics Drivers Version 267.91 which are the only ones that seem to work as in it fixes the screen to the proper resolution and lets me into the NVIDIA control panel yet after about 10-15 mins the screen will go black or the computer will just freeze. Rebooting causes the same issue after 10-15mins
I have noticed a few others out there experiencing the same problem but no fixes as of yet any ideas??

Thankyou for the reply,
Tested the card in another working machine capable of running and its fine I am sure the PSU I have is more than capable of running this card I ran 2 6970's in xfire on the same PSU and motherboard with no problems.
I am running it on an 40"BRAVIA LCD and am using the DVI to HDMI converter that came with the GTX590 and I have also tried it with an DVI to HDMI cable also.
The system is stable under the latest NVIDIA drivers but the display drivers aren't recognized under device manager and the screen resolution is still stuck in the safe mode size, they are shown up as having the same "error 43" and I still can't get access to the NVIDIA control panel.
I strongly believe this is a driver issue or an issue relating to software within windows. To give you a rundown on several things that I have tried to isolate or fix the issue with is in a list here:
1. Installed every different version of drivers on an fresh install of windows7 including the latest Beta drivers
2. Tried to run the GTX590 on another machine and it runs using windows7
3. Run different graphics card setup using the same PSU RAM and mb on windows7 no problems.
4. Run the gfx card on only 1 gpu no change.
5. Last step I will take is to install Windows7 without the SP1 as I have read elsewhere that similar problems have been fixed by doing this if that don't work might just sell my soul to the devil n see if he can fix it lol.

Cant access lync control panel

i have troubles opening the lync server control panel, when i login using my administrator i get "navigation to the webpage was canceled".
to get the obvious out of the way:
- DNS record for admin already added, pointing at lync FE server
- The user, used for loggin in is member of CSAdministrator
- I am able to ping between the Lync FE and and AD
- IIS https setup, ip:all unassigned port 443,is set to use the lync FE certificate
if any further information is needed please tell me

Hi,
Did you change the simple URL to access Lync server Control Panel? If yes, please make sure you also change for DNS record and certificate. You can run the Enable-CsComputer on each Front End server to register the change.
Please also make sure W3SVC work normally.
You can refer to the link below of “Troubleshooting Lync Server 2013 Control Panel”:
http://technet.microsoft.com/en-us/library/gg195689.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
you mean the one i set in the lync topology manager? called admin.domain.local ? if so, then no it isnt changed

How do I locate the quicktime control panel (to upgrade to quicktime pro) in Windows 7 home premium?

I just paid to upgrade QuickTime and received a registration code. Tho problem is there is no way to find the QuickTime control panel via the Windows 7 Home Premium control panel. How to I ovrcome this?
p.s. I'm a newbe to QuickTime :-)

Thanks Gary,
This does not help me... the instructions state:
1. Locate the QuickTime 7 Control Panel
From the Windows Desktop, click on the Start menu, choose Settings, then choose Control Panel, then locate the QuickTime 7 Control Panel.
However, I cannot locate the QuickTime 7 Control Panel on the Windows 7 control panel -- it's not listed anywhere in the available options.

Exception Error from the Quicktime control panel/Update

When I press the Update button under the Update tab, I get the following error:
An exception occurred while trying to run "C:\Windows\system32\shell32.dll,Control_RunDD "C:\Program Files\QuickTime\QTSystem\QuickTime.cpl",QuickTime"
Quicktime seems to run correctly and says I have version 7.4.1 installed, so I'm not really worried as I wind up having to manually install any updates anyways. Also, I have automatic updates disabled, I have removed the autoupdater from my startup (slowed down my windows loading), and since that Bonjour service is annoying and nonessential, I have turned it off as well.
If any of these are the reason for the error, I'm willing to live with it. Just thought I'd let you know about the update error.

+When I press the Update button under the Update tab, I get the following error:+
+An exception occurred while trying to run "C:\Windows\system32\shell32.dll,Control_RunDD "C:\Program Files\QuickTime\QTSystem\QuickTime.cpl",QuickTime"+
Do you have an nVidia video card in that PC, Drakaran? That seem to be the common factor for people with the Update tab crash with 7.3.1, 7.4 and (presumably) 7.4.1 (and also the crash when they try using "Help > Update Existing Software" instead of using the Update tab in the control panel).
One way around it (for some folks) is to go to the Advanced tab in their QuickTime control panel, and check "Safe mode (GDI only)". With that setting in place, OK out of the control panel, restart QuickTime and try another check for updates.

QuickTime Control Panel causes BSOD

Installed the Quicktime 7.6.5. All went well (or so I thought). The next day on bootup, I received a notification that a driver condition caused a blue screen. O checking in the system logs, I found the actual problem was QuickTime control panel, so I removed the QuickTime from the system, after which I rebooted and removed all registry info and rebooted again. Problem solved here, but would like to see a rewrite of control panel and app support center to agree with the libraries that work with qt (quartz, etc) so the bluescreen will not occur.

O checking in the system logs, I found the actual problem was QuickTime control panel,
Interesting. When you used WinDbg (Windows debugging tools) to analyse your memory dump of the crash, did that confirm that the STOP error was caused by the QuickTime.cpl file?

Cant sign into control panel after new

cant sign into control panel after new Firmware instaltion. Please help. WRT160N v2

Thats nice to know that, So just reboot a modem has solve the problem. Enjoy.

Can't open quicktime control panel...among other issues w/ QuickTime/iTunes

I download itunes and then try to open it and before it opens and error occurs causing it to close. all other apps seem functional except quicktime. I can't open it under control panel (An exception occurred while trying to run “C:\WINDOWS\system32\shell32.dll,Control_RunDLL
“C:\WINDOWS\system32\QuickTime.cpl”, QuickTime”) and when I try to open it from the START menu I get "QuickTime failed to initialize. Error # - 2095". Any ideas on how to fix this so I can get QuickTime and iTunes working? Thanks for the help.

I have exactly the same problem!!
Been on this site since Dec 26th and still can't get ipod to work.
You would think Apple would have a help line!
If you solve yours please let me know how you did it, and I will do likewise.
Thanks
Pat Mahoney

TS4022 cant get icloud control panel to load correctly to use outlook 2013

i cant get control panel to load correctly to allow me to set up sync functions to my outlook 2013 on my pc

Solved. Uninstall iCloud Control Panel from Windows 8 machine (use Control Panel). Restart, reinstall iControl 2.0.

Updated Firefox but it disabled Microsoft net framework.. can't even access my Control Panel, now. What do I do?

It told me after the fact that it was not compatible with Microsoft net framework and that when a fix came up, I'd be able to find it. I cannot access any programs nor anything in the control panel.

Which Operating System do you have?<br />
Are you running Firefox in some compatibility mode or did you (or an extension) change the user agent as it shows NT 4 as the OS?
*Mozilla/5.0 (Windows NT 4.0; rv:7.0.1) Gecko/20100101 Firefox/7.0.1
*https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

Access to Control panel not working on iPad mini with ios7

Control center too difficult to access within apps or lock screen or home screen.
Swiping up from the bottom works once every 30 swipes.
Definitely a bug in ios7 while using my iPad mini.
Apple, please fix this.

Wait, just found a fix.
You must swipe multiple times (quickly) from the bottom to access it.
That seems to work, and not as finicky as I thought initially.
I could easily get used to it this way, however Apple doesn't explain accessing it this way, so they should update the ios7 video for iPads if this is how the control panel was designed.

Flash content blank and unable to access flash control panel to turn off hardware acceleration.

Flash content appears as blank and nothing happens when attempting to access flash player settings. Not sure if it helps, but the operating system is Mac OS X Mavericks running in virutal machine.
* QuickTime
* Shockwave Flash 14.0 r0
* Displays Java applet content, or a placeholder if Java is not installed.

Hi 薛定谔的老猫,
On your [about:addons] page, please select "Always Activate" for the Flash player.
*If it is crashing: [[Send plugin crash reports to help Mozilla improve Firefox]]
*Please also try to reload the page after you change this setting.
* Also try to reinstall Flash.
Please post back with your results, it can help other users.

Why can't I access the control panel of my E1000 router?

http://192.168.1.1/ cannot be displayed when I click on it, as if the page does not exist. http://my.E1000 doesn't work either.
My router frequently has connection issues as well when laptop users are complaining that they are "connected but have limited connectivity". In reality they have no connectivity. They have no internet access on their browsers or games. Resetting it seems to be the only thing that ever fixes this and now, despite my network supposedly being called "Neil," it's calling its self "Neil 2" and has no password. I can't change it back because I cannot get into my router's settings either!
So yea. In a few words, it's all kind of bork. Does anyone know what is wrong with it?
Solved!
Go to Solution.

What is the ip address you are getting on the computer which is connected to the router....?
Check the ip address.If you are getting the correct ip address(192.168.1.1) then,reset the browser settings and try again to open the setup page.If that also does not work then,reset the router for 45-50 seconds,power cycle the router and check.

HT4759 Problem with accessing iC Control Panel on PC

When I try to sign in, I get a server error msg. I can access iCloud web with no problem via my PC. iPad iCloud apps are fine too. I found some suggested solutions on the Internet but none works. Does anyone have any suggestions? Thanks.

- The problem seems to be fixed Here's the solution for my card: <a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493" title="Linkification: http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493"]http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493[/url]

When i opened my ipad the keyboard was up and is locked. how do i get it to go down so i can access my control panel?

When I opened my ipad cover the keyboard was up and locked so no other screen is accessible. It was not up when I closed it earlier. How do I get the keyboard unlocked and down?

You could press the keyboard down button (shown bellow), or hold it if its not going down. OR Hold the power button for about 8 seconds until it asks you if you want to reset (slide to unlock). OR switch the little switch located on the side of your ipad (shown Below)

Cant access quicktime control panel

Similar Messages

Maybe you are looking for