Cant access router's login page
my macbook cant access the router's login page,but i cant access the internet through this wifi
here is some info i think may be useful
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 80:e6:50:00:a0:c6
inet6 fe80::82e6:50ff:fe00:a0c6%en0 prefixlen 64 scopeid 0x4
inet 192.168.2.101 netmask 0xffffff00 broadcast 192.168.2.255
nd6 options=1<PERFORMNUD>
media: autoselect
status: active
en1: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 72:00:04:91:16:20
media: autoselect <full-duplex>
status: inactive
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=60<TSO4,TSO6>
ether 72:00:04:91:16:21
media: autoselect <full-duplex>
status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 82:e6:50:00:cc:00
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x2
member: en1 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 5 priority 0 path cost 0
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 6 priority 0 path cost 0
nd6 options=1<PERFORMNUD>
media: <unknown type>
status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
ether 02:e6:50:00:a0:c6
media: autoselect
status: inactive
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.2.1 UGSc 28 0 en0
127 localhost UCS 0 0 lo0
localhost localhost UH 34 2643545 lo0
169.254 link#4 UCS 1 0 en0
169.254.71.63 74:2f:68:73:6d:e UHLSW 0 0 en0 281
192.168.2 link#4 UCS 2 0 en0
192.168.2.1 94:c:6d:30:49:de UHLWIir 29 178 en0 1029
192.168.2.101 localhost UHS 0 0 lo0
192.168.2.102 74:2f:68:73:6d:e UHLWI 0 0 en0 290
If some people cant help I'll really appreciate.
What I did was a hard reset... (hold reset for 10 or 30 seconds then while holding, unplug unit then release reset button. After 10 more seconds, plug unit back in.)
Between that and using the TFTP program, I was able to get back into my management screen. You will have to reconfigure your router after that. Be sure, if you have a dedicated ip on your computer, you temporarily set it to obtain everything automatically incase your set ip doesnt correspond to the default settings for your router. Then once everything is back up, you can change you ip settings on your PC back to what you had, if any.
Similar Messages
-
Cant access Router's Web Based Management anymore
WRT54G v5
All of a sudden, i cant access the web management pages for my router. I have reflashed using the TFTP program and no change. I have tried resetting my router and it doesnt reset. Anyone have any ideas what else to try?What I did was a hard reset... (hold reset for 10 or 30 seconds then while holding, unplug unit then release reset button. After 10 more seconds, plug unit back in.)
Between that and using the TFTP program, I was able to get back into my management screen. You will have to reconfigure your router after that. Be sure, if you have a dedicated ip on your computer, you temporarily set it to obtain everything automatically incase your set ip doesnt correspond to the default settings for your router. Then once everything is back up, you can change you ip settings on your PC back to what you had, if any. -
Limit access to Apex login page
Hi,
We are deploying an application to our users. I need to limit access to Apex login page f?p=4550 to some predefined Ip adresses. Any ideas on this?
Best regards,
Onur.How exactly the APEX engine forces a '404' to be returned, I am not entirely sure. Perhaps it sends back the Response with the Header Status set to 404 ?Yes, with this process on the login page.
begin
if not #OWNER#.wwv_flow_security.ip_check then
#OWNER#.wwv_flow.g_unrecoverable_error := true;
sys.owa_util.status_line(404, 'Page Not Found');
sys.owa_util.http_header_close;
end if;
end;Scott -
How to set up automatic connection to a router's login page
When I try to use a public wifi (say at the library) that requires a simple login, my Firefox does not automatically seek the login page. How can I make that automatic? Of course, I am manually connecting to the router and opening my Mozilla, but it simply times out because it finds nothing. In order to make it work, I always have to type in IP address. How do I make Mozilla automatically find the login page once connected to the router?
jscher2000,
I tried your suggestions: (i) When I clicked a bookmarked page (wsj.com) it continued to spin its wheels and ultimately timed out. (ii) Ctrl+Shift+r did absolutely nothing also.
Also, I tried your suggestions in both Mozilla Firefox and Internet Explorer to no avail.
There must be a simple setting in either of the two browsers options menus that tells it to automatically seek out a router's login page. Why would this not be occurring on my four month old laptop.
Thanks for helping. -
Not able to access the portal login page and idenetity console page
Hi all.
I installed PS 6.1 on a new Solaris 8 Box. DNS is not configured for this box.
I use netscape browser on the solaris boz to test my installation - everything is fine
issue:
When i tried to access the amconsole or amserver/UI/Login application, it bombs with the following exception.
but i can see the default webserver page (or any static html for that matter).
any clue?
10/28/2003 03:22:22:776 PM EET: Thread[Thread-195,5,main]
ERROR: Exception occured
java.lang.Exception: Service URL not found:session
at com.iplanet.services.naming.WebtopNaming.getServiceURL(WebtopNaming.java:180)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:686)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:668)
at com.iplanet.dpro.session.Session.getSession(Session.java:540)
at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:73)
at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:280)
at com.sun.identity.authentication.service.AuthUtils.getOrigLoginURL(AuthUtils.java:1546)
at com.sun.identity.authentication.UI.LoginViewBean.forwardTo(LoginViewBean.java:253)
at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:783)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:434)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:312)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:282)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:919)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1061)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)I am facing the same problem. I am using Custom Authentication module. When I access the login page for this custom authentication module I got this error. I have DNS entry and added the IP Adress in the host file too. Anyone tell us, what could be the problem?
-
Help: can't access router's config page
Hi, Anyone else having this issue? Whether is via WiFi or Wired, I can't access the router's config page. Thank you.
hectorresto725 wrote: ... I can't access the router's config page. ...What is the device model number? If it's a Comcast gateway try pressing the (probably recessed) Reset button (use a toothpick or similar), and then log in to http://10.0.0.1/ with userid "admin" and password "password". See http://customer.xfinity.com/help-and-support/internet/wireless-gateway-username-and-password/
-
Cant access Gmail or any page where i have to sign in.
Cant access Gmail or most any page where i have to sign in. Doesn't matter whether I use FireFox or Safari, I still get a message like,
safari can't open page
safari can't open the page "https://support.Apple.com/.........because Safari can't establish a secure connection to the server "support.apple.com"
I had to use my phone to post this very message since I could not access this page on my Mac Mini .
I get similar messages when trying to check my Gmail .
This only occurs on my Mac Mini , not on my other computers that are on the same wireless network. My Dell laptop and desktop have no problem accessing mail or other sites
thanks,
JeffI'd try this:
1) Disable all your add-ons
2) Delete your history and cookies
3) do you use the password manager? If so, delete your passwords
4) If nothing works, backup your profile (optional), and create a new one
http://support.mozilla.com/en-US/kb/Managing%20profiles -
Unable to Access SSL WebVPN Login Page
I am unable to access the SSL WebVPN login html page. I tried using FF, Chrome, and IE via https://24.43.XXX.XXX. All I get is "Page cannot be displayed". I am stumped here, any help would be greatly appreciated.
PLAN-FW# show run
: Saved
ASA Version 9.1(1)
hostname PLAN-FW
domain-name intranet.example.com
enable password s9HtiQv6kkqqiJhc encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd 2KFQnbNIdI.2KYOU encrypted
names
ip local pool VPN-Clients 192.168.5.2-192.168.5.220 mask 255.255.255.0
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 24.43.XXX.XXX 255.255.255.252
interface GigabitEthernet0/1
channel-group 1 mode active
no nameif
no security-level
no ip address
interface GigabitEthernet0/2
channel-group 1 mode active
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
management-only
nameif Management
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Port-channel1
nameif DR-01
security-level 100
ip address 10.0.0.1 255.255.255.252
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
name-server 8.8.8.8
name-server 4.2.2.2
domain-name intranet.example.com
object network obj-internet
subnet 0.0.0.0 0.0.0.0
object network obj-vlan100
subnet 10.0.100.0 255.255.254.0
object network NETWORK_OBJ_192.168.5.0_24
subnet 192.168.5.0 255.255.255.0
pager lines 24
mtu outside 1500
mtu DR-01 1500
mtu Management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-713.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (DR-01,outside) source static any any destination static NETWORK_OBJ_192.168.5.0_24 NETWORK_OBJ_192.168.5.0_24 no-proxy-arp route-lookup
object network obj-vlan100
nat (DR-01,outside) dynamic interface
route outside 0.0.0.0 0.0.0.0 24.43.XXX.XXX 1
route DR-01 10.0.0.0 255.255.255.252 10.0.0.2 1
route DR-01 10.0.100.0 255.255.254.0 10.0.0.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 Management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint SELF-TP
enrollment self
fqdn intranet.example.com
subject-name CN=intranet.example.com
keypair myrsakey
crl configure
crypto ca trustpool policy
crypto ca certificate chain SELF-TP
certificate 4fb08954
30820203 3082016c a0030201 0202044f b0895430 0d06092a 864886f7 0d010105
05003046 311e301c 06035504 03131569 6e747261 6e65742e 70656c61 74726f6e
2e636f6d 31243022 06092a86 4886f70d 01090216 15696e74 72616e65 742e7065
6c617472 6f6e2e63 6f6d301e 170d3134 31323136 31313237 32315a17 0d323431
32313331 31323732 315a3046 311e301c 06035504 03131569 6e747261 6e65742e
70656c61 74726f6e 2e636f6d 31243022 06092a86 4886f70d 01090216 15696e74
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside client-services port 443
crypto ikev2 remote-access trustpoint SELF-TP
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl trust-point SELF-TP outside
webvpn
enable outside
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
anyconnect profiles Example_Intranet_client_profile disk0:/Example_Intranet_client_profile.xml
anyconnect enable
tunnel-group-list enable
group-policy "GroupPolicy_Example Intranet" internal
group-policy "GroupPolicy_Example Intranet" attributes
wins-server none
dns-server value 8.8.8.8 4.2.2.2
vpn-tunnel-protocol ikev2 ssl-client
default-domain value intranet.example.com
webvpn
anyconnect profiles value Example_Intranet_client_profile type user
username test1 password GxmPkeumVbHvz58J encrypted privilege 15
username test2 password t.GxS9C3hRYHni61 encrypted
username test3 password M9Szy/s33Cm6Crby encrypted
username test4 password hMXxQZTu8agZnzki encrypted
tunnel-group "Example Intranet" type remote-access
tunnel-group "Example Intranet" general-attributes
address-pool VPN-Clients
default-group-policy "GroupPolicy_Example Intranet"
tunnel-group "Example Intranet" webvpn-attributes
group-alias "Example Intranet" enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly 10
subscribe-to-alert-group configuration periodic monthly 10
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:4976c27fbf11ae4589d27b4f16107a41
: end
Directory of disk0:/
10 drwx 4096 08:15:36 Sep 19 2014 log
20 drwx 4096 08:16:04 Sep 19 2014 crypto_archive
21 drwx 4096 08:16:12 Sep 19 2014 coredumpinfo
114 -rwx 37416960 08:24:28 Sep 19 2014 asa911-smp-k8.bin
115 -rwx 18097844 08:26:28 Sep 19 2014 asdm-713.bin
116 -rwx 69318656 08:27:50 Sep 19 2014 asacx-5500x-boot-9.1.1-1-RelWithDebInfo.x86_64.img
117 -rwx 12998641 08:47:34 Sep 19 2014 csd_3.5.2008-k9.pkg
118 drwx 4096 08:47:36 Sep 19 2014 sdesktop
119 -rwx 6487517 08:47:38 Sep 19 2014 anyconnect-macosx-i386-2.5.2014-k9.pkg
120 -rwx 6689498 08:47:40 Sep 19 2014 anyconnect-linux-2.5.2014-k9.pkg
121 -rwx 4678691 08:47:42 Sep 19 2014 anyconnect-win-2.5.2014-k9.pkg
122 -rwx 200 14:26:42 Dec 08 2014 upgrade_startup_errors_201412081426.log
129 -rwx 338 11:59:35 Dec 16 2014 Example_Intranet_client_profile.xml
8238202880 bytes total (4860497920 bytes free)
Cisco Adaptive Security Appliance Software Version 9.1(1)
Device Manager Version 7.1(3)
Compiled on Wed 28-Nov-12 11:15 PST by builders
System image file is "disk0:/asa911-smp-k8.bin"
Config file at boot was "startup-config"
PLAN-FW up 5 days 5 hours
Hardware: ASA5515, 8192 MB RAM, CPU Clarkdale 3059 MHz, 1 CPU (4 cores)
ASA: 4096 MB RAM, 1 CPU (1 core)
Internal ATA Compact Flash, 8192MB
BIOS Flash MX25L6445E @ 0xffbb0000, 8192KB
Encryption hardware device : Cisco ASA-55xx on-board accelerator (revision 0x1)
Boot microcode : CNPx-MC-BOOT-2.00
SSL/IKE microcode : CNPx-MC-SSL-PLUS-T020
IPSec microcode : CNPx-MC-IPSEC-MAIN-0022
Number of accelerators: 1
Baseboard Management Controller (revision 0x1) Firmware Version: 2.4
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 100 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
Encryption-DES : Enabled perpetual
Encryption-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 100 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
IPS Module : Disabled perpetual
Cluster : Disabled perpetual
This platform has an ASA 5515 Security Plus license.Hi Nathan,
Are you using Ikev2 to connect. If not then can you please remove the following command and then try again:
no crypto ikev2 enable outside client-services port 443
Thanks
Jeet Kumar -
AnyConnect - cant access router's lan, but everything else is reachable.
Hello,
i have a strange problem which i am trying to resolve, but i have run out of ideas.
I have a router on which i have Anyconnect as RA , and DMVPN to form S2S vpn with other locations.
I can successfully connect to router via anyconnect, it will push a routing to the clients ok. I can ping all router interfaces, and even the remote lans.
But i cant ping any computer on local lan of the router. Its not the problem of the firewall on router (zbf) as i have tried to disable it completely with no effect.
I have also tried to connect via anyconnect to other router in the dmvpn network and i can access my local lan.Hmmm, i have added access-list 105 deny ip 192.168.5.0 0.0.0.255 192.168.5.0 0.0.0.255
just to be sure but it does not fix the issue.
Which is expected from my side as the anyconnect vpn pool is " ip local pool SSLVPN-POOL 192.168.5.200 192.168.5.210 and svc address-pool "SSLVPN-POOL" netmask 255.255.255.0
" . As my local subnet is 192.168.5.0/24 it is in the same subnet so there should not be NAT taking place. Or am i mistaken somewhere ?
I do not have ip nat inside statement on virtual-template1 also.
Will try to extend the SSLVPN-POOL to the whole subnet or changing the subnet for it, to see if this has any effect. -
ESS IView access to ERP - login page displayed and not access possible
Hello Colleagues,
we have to setup Employee Self-Service (ESS) Portal as well ERP.
All required steps seems to be performed but we still facing one access issue.
If I try to enter the Link My Employees under SAP Portal > Employess Self-Service > Travel and Expenses it get an web login (ITS) from the ERP system and not direct access to the service. In addition I am not able to login with defined user an password.
If I try the to enter the service directly (test service) at transaction SICF on the ERP (ECC) System itself it works fine as well with defined user and password.
If both IE Browser Windows are open, then I am able to see the service (empty table) unter My Employees at portal after click again under Link SAP Portal > Employess Self-Service > Travel and Expenses > My Employees.
So I think the general connectivity works fine but some thing still wrong with maybe IView access/permissions/roles?
Any Ideas?
Many thanks in advance!
Regards,
JochenThis means that your Single sign on is not working correctly.
Things to check:
1. From Portal System Administration - for the system object created for connecting to the backend system - try to perform the connection tests and make sure they pass.
2. Access your portal with a Fully Qualified Domain Name (for example: myportal..mysubdomain.mydomain:port/irj/portal instead of just myportal:port/irj/portal) - this should most likely resolve your issue - since you see the error only for WD4A applications.
3. Make sure that the host name you have configured in the portal system and the host name with which you access your portal are in the same domain.
Also, check the SSO related profile parameters in the backend system:
login/accept_sso2_ticket=1
login/accept_sso2_ticket=0
login/password_change_for_SSO=0
Thanks,
Shanti -
Am not able to get the Access manager 7- login page
I have installed Access Manager and configured it was worked. but i did the Policy agent cofiguration for Access Manager after that i couldn't login to Access manager ie /amserver while on trying http://localhost:8080/amserver/UI/Login
am getting the following error
exception
javax.servlet.ServletException
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:300)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
java.security.AccessController.doPrivileged(Native Method)
com.sun.mobile.filter.AMLController.doFilter(AMLController.java:163)
root cause
java.lang.NoClassDefFoundError
com.sun.identity.authentication.server.AuthContextLocal.(AuthContextLocal.java:140)
com.sun.identity.authentication.service.LoginState.createAuthContext(LoginState.java:1121)
com.sun.identity.authentication.service.AuthUtils.getAuthContext(AuthUtils.java:310)
com.sun.identity.authentication.service.AuthUtils.getAuthContext(AuthUtils.java:250)
com.sun.identity.authentication.UI.LoginViewBean.forwardTo(LoginViewBean.java:325)
com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:981)
com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:615)
com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
sun.reflect.GeneratedMethodAccessor115.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
java.security.AccessController.doPrivileged(Native Method)
com.sun.mobile.filter.AMLController.doFilter(AMLController.java:163)
please any do some need full to solve this problem
regards
vimalraj.sGuys,
This is a common problem that I have noticed when policy agent is installed on the same DAS (Domain Admin Server of Sun java Application Server) instance where access manager is installed.
Best solution is to deploy your application on a different DAS and configure / install policy agent for the new DAS.
If web server is used for Access Manager, Deploy your application on a different instance.
Alternatively, follow these instructions.
Assume that you have policy agent binary installed on /opt/SUNWam/policyagent/ j2ee_agents/am_as81_agent.
When policy agent is configured, it creates a new configuration folder named agent_001.
1. Login to DAS and remove the class path changes done by the policy agent installer.
These are the class path to remove:
/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/lib/agent.jar
/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/lib/amclientsdk.jar
/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/locale
/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/agent_001/config
2. Add these to the class path to the end of the class path suffix. NOT AT THE START
/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/lib/agent.jar
/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/lib/locale
3. Insert amclientsdk.jar to the classpath. Insert this before agent.jar but after am_*.jar files (am_sdk.jar,am_services.jar,am_sso_provider.jar,am_logging.jar )
4. open amConfig.properties . Add this line to the bottom of the file.
com.sun.identity.agents.config.location=/opt/SUNWam/ policyagent /j2ee_agents/am_as81_agent/agent_001/config/AMAgent.properties
Above line points to the policy agent configuration file.
5. last but not the least:
a. Make sure that an agent is created in Access manager with the same name and password as the one that you gave when installing policy agent.
b. Set property com.sun.identity.agents.config.filter.mode = SSO_ONLY in AMAgent.properties. This will help initial testing of the configuration.
c. Above configuration is for Unix. But shouldwork for other OS as well.
Best of Luck
KK -
Cant access Oracle XE Home page
I am a new user trying to learn oracle and, having downloaded XE, find I cannot access the Homepage. Help please!
Make sure to start the database, using the program links provided during installation. Then use the link that says: "Go to Database Home Page"
Earl
Oh, BTW, there is an Oracle XE specific forum you'll probably want to look into. You'll find a registration link was placed in your program links when you did your XE installation.
Message was edited by:
Earl -
Cant access my service plan page
When i login at http://admin.emea.acrobat.com/ i see an empty service plan page:
https://service.acrobat.com/cfusion/bots/serviceplan/index.cfm
How i can change my service plan ?Hm, I don't know. I've never actually seen that page work, but I've never had an account purchased through adobe.com to play with.
I'd reach out to Adobe Support with your needs, and see if they have an answer about that page's functionality:
http://www.adobe.com/support/connect/connecthostedsupport.html -
Cannot access login page and no wireless signal
Hello, I am using a WRT54G ver 2 router, everything was working fine until a couple of days, when just out of the blue my wifi stopped working, the wireless light does not lit on the router, I tried resetting, disconnecting the router and modem, and upgrading the firmware(which I cannot because I cannot access the setup page) and nothing seems to work, hopefully someone here can help me,
Thank you
JBAfter a firmware upgrade you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt, or your firewall is still turned on. In this case, turn off the firewall, and if you still cannot complete step 10, then use the Linksys tftp.exe program to try to reload your router with the latest firmware. (If you have already reloaded the firmware with tftp.exe, and you still cannot complete step 10, then the router is dead.) After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 03-26-2008 02:10 AM -
Authorization Scheme for Application - Login Page?
Hi,
When I set an Authorization Scheme at Application level, HTML DB prevents access to my login page. Is there a way around this?
Thanks,
Stephen BaishyaIf you follow the above route you have to run the check on each page view.
If you leave as per session the first time you run the authorisation check on the login page it returns true and the user will be allowed onto the application!
I'm looking for an alternative way to run the authZ check after the authN check passes the credentials to validate the user access right to the app. I'll post my findings later ...
cheers
Craig
Maybe you are looking for
-
Hi Falks, If any one knows about interactive report transaction code than plz give reply as well as send me one step by step example how to create interactive reports. mail me on "[email protected]". Thanx and regards, Rahul Talele
-
How does one change preferences around so that pdfs will open in Preview and not Adobe Reader? Thanks!
-
I have to guess where the comma is the @ sign is and various signals now tell what am i doing wrong on the apple usb keyboard
-
About The Apple iPod nano Dock
I'm going away for a month where I won't have a computer, so I'm thinking of buying this product. But I'm not exactly sure what it does. It charges it even when it's away from a computer, right? And does it need the iPod USB Power Adapter to charge m
-
HD Icon (system disk) Disappeared
The Main HD icon on which the system disk is on has disappeared from the desktop. Just disappeared. I ran disk utility to verify the disk and it did need repair, so booted from edrive(techtool) and ran apples disk utility program to repair the disk w