Cant access serviceability from one CUCM server to the next

If I log into my pub and serviceability, I try to access my other subs. I keep getting an error when trying to access the other servers from the drop down list. Although, everything is replicating throughout the cluster, I can log into another CUCM and only use serviceability for that one server also.
Im going to do a reset tonight on the cluster. the logs are clean and clear on RTMT on all servers. It's very odd. I thought maybe a security password would be wrong, but there are no errors anywhere on any server in the cluster.

Hi,
there is a bug associated to this issue
Unified Serviceability Tools can not connect to other nodes
CSCud67438
Description
Symptom:
Cisco Unified Serviceability pages Tools -> Service Activation or Control Center Feature or Network Services can not connect to other nodes in the cluster.When another node is selected the Status indicates Connection to the Server cannot be established (Unknown Error)
Conditions:
CCMService Tomcat logs indicates the following error message when attempting to connect to other nodes in the cluster,
{http://xml.apache.org/axis/}stackTrace:javax.net.ssl.SSLException: Certificate not verified.
Workaround:
We have the following workarounds
- Accessing SUB serviceability pages directly
- Restarting tomcat on PUB ( once ) after the upgradeFor SNMP configuration where same Community string needs to be added or modified on all nodes, again using a Subscriber node instead of the Publisher also seems to work in this case.
regds,
aman

Similar Messages

  • How to move phones from one CUCM server to another?

    How easy is it to migrate IP phones from one CUCM server to another?
    The situation is this:
    A vessel currently sitting in dry dock has 14 IP phones onboard which currently register with a CUCM server half way round the world (literally). As you can imagine there is quite a fair amount of delay for the signal processing, not to mention the connectivity being over a VSAT link. This being a temporary solution.
    A CUCM server has been configured and installed on the vessel with all the relevant partitions, route patterns, trunks etc. The phones have also been added to the new server ready for migration. The only real thing that will be different when the phones are migrated is the Directory Number on each phone. Both CUCM servers are running software version 7.1.3
    The phones currently pick up their local IP addresses via a local DHCP server which assigns 150 TFTP Server IP Address for the remote CUCM server. Is changing the the TFTP Server IP address to the local CUCM server enough to have the phones register with the local server.
    This is not something I've tried before so would appreciate feedback or any comments that may indicate anything I missed along the way.
    Thanks,
    Ric

    Hi Ricardo,
    On the DHCP scope created for the voice vlan change the Option 150(TFTP Server IP address) to the new CUCM and remove/delete the remote CUCM IP address just to ensure that phones once after registering to the new CUCM will not fetch any config from the remote CUCM as the DN's of the phones are changed on the new CUCM please ensure this.
    Apart from this i dont see any challenges as the firmware of the IP Phones will also remain same as CUCM version is same.
    Hope that helps.
    Regards
    Najaf

  • Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

    Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

    This is planned to be fixed in the next release.

  • How do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

    how do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

    I'm partial to this series:
    After Effects basics tutorials by Andrew Devis
    The subject matter is very clearly-defined by topic.
    And AE shouldn't up & quit on you... but you haven't breathed a word about your system or your AE version.  Please share.

  • How to copy line items from one expense report to the next

    I travel to the same project/destination every week so in PR05, I was able to just copy the previous expense report for the new week and edit the expense values. Now, when I book travel, the air line booking starts a new expense report entry.
    Is there a way to copy the employee-paid expenses to the GetThere-generated trip entry expense report, i.e. just copy the line items from one expense report to another that already exists. I guess that would be a merge function.

    Hi Tom,
    Here are two alternative solutions:
    Alternative 1:
    If you copy the expense report before you book the services (flight, hotel …)
    in GetThere, then the airline or hotel bookings will not start a new expense
    report but will be assigned to the copied expense report.
    Alternative 2:
    This alternative is a bit laborious.
    Shift the start date and end date of the expense
    report  that was automatically created by
    your flight booking for next week (e.g. Calendar Week (CW)  47) to the week after next week (e.g. CW 48).
    Copy the expense report of the previous week (e.g.
    46)
    Afterwards open the expense report that you
    moved to CW 48 and click on the tab strip itinerary
    Now assign the bookings (flight, hotel …) to the
    expense report of CW 47 by clicking on the button assign to existing trip
    Later delete the expense report in CW 48
    Get back to me if you have any questions concerning the alternatives outlined
    above.
    Note:
    These solution alternatives are only available for customes using HTML5 UIs.

  • Text has different look from one text box to the next on same page issue

    Hi,
    I'm in the process of creating a new site that contains quite a bit of text from a book I wrote. I've taken the text from the original source, put it into text editor and made it into plain text. From there, I've pasted it into the iWeb text boxes and adjusted the text look (font is Arial, justified alignment). When viewing it in IE (probably others?), one block of text looks different than others.
    http://www.goaheadtakethewheel.com/Test13.html
    I've verified that the font size and other options are all the same on iWeb. For the life of me I can't seem to figure this out. The only way I can think of possibly resolving this is to re-type each section from scratch. Given that there are about 75 wordy pages...UGGGG!
    Any suggestions or ideas? Thanks for your time and help!!
    Dave Gran

    You could first try deleting your iweb preference file <com.apple.iWeb.plist> it is in your Library/preference folder.
    To create a new domain file, first save your current file in a safe place, such as an external hard drive, burn to a CD, etc. By default it is in your User/Library/Application Support/iWeb folder. All your work is in this file, keep it safely backed up, if you lose this file you lose all your work, you can't restore from the published web site. When you get this file saved safely off your computer and open iWeb it will create a new empty domain. Once you have the new file created you can bring the old file back to the computer. You can put them side by side in any folder (give them different names so one won't replace the other) At this point you can double click the domain file itself to open iWeb. You could try cut and paste between the two domains. I'm not sure this will solve the problem but you could try it on one page, publish to a local folder and see if it helps. Sounds like a lot of work.
    Which ever domain file was last used is the one iWeb will subsequently open unless you double click the actual domain file to open iWeb. Be careful and good luck.
    David

  • Can Apple TV fade from one music title to the next?

    Playing my mysic with iTunes I can set it to fade softly from one title to the next, without pausing between the tracks.
    I can't find this setting in my new Apple TV and the Apple TV seems unaffected by my settings in my iTunes. How can I tell my Apple TV to behave like I want?

    Thank's a lot for your quick answer.
    I hope though, this feature will be implemented via software update sometime.

  • How do I move from one keynote slide to the next with ios8?, How do I move from one keynote slide to the next with ios8?

    I don't seem to be able to move from one simple keynote slide to the next.
    I just have text on each - like notes for a presentation.

    Howdy tommmy,
    To go to the next slide in a Keynote for iOS presentation, tap on the screen with one finger. See this article for information about gestures in Keynote -
    Keynote for iOS (iPad): Touchscreen basics for Keynote
    Tap
    Using one finger, quickly and firmly touch the screen and then lift your finger. Use this gesture to select an object or activate a button. You also use this gesture to advance to the next slide when playing a presentation.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • How do I move from one Keynote slide to the next in ios8

    I don't seem to be able to move from one simple keynote slide to the next.
    I just have text on each - like notes for a presentation.

    Howdy tommmy,
    To go to the next slide in a Keynote for iOS presentation, tap on the screen with one finger. See this article for information about gestures in Keynote -
    Keynote for iOS (iPad): Touchscreen basics for Keynote
    Tap
    Using one finger, quickly and firmly touch the screen and then lift your finger. Use this gesture to select an object or activate a button. You also use this gesture to advance to the next slide when playing a presentation.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • ITunes skips from one radio station to the next one

    I listen to radio stations via iTunes while I work. After an hour or so, the station skips to the next one in the list. What's going on?

    Hi Tom,
    Here are two alternative solutions:
    Alternative 1:
    If you copy the expense report before you book the services (flight, hotel …)
    in GetThere, then the airline or hotel bookings will not start a new expense
    report but will be assigned to the copied expense report.
    Alternative 2:
    This alternative is a bit laborious.
    Shift the start date and end date of the expense
    report  that was automatically created by
    your flight booking for next week (e.g. Calendar Week (CW)  47) to the week after next week (e.g. CW 48).
    Copy the expense report of the previous week (e.g.
    46)
    Afterwards open the expense report that you
    moved to CW 48 and click on the tab strip itinerary
    Now assign the bookings (flight, hotel …) to the
    expense report of CW 47 by clicking on the button assign to existing trip
    Later delete the expense report in CW 48
    Get back to me if you have any questions concerning the alternatives outlined
    above.
    Note:
    These solution alternatives are only available for customes using HTML5 UIs.

  • I want to play one gapless album and have the Ipod turn off.  When I download my audiobooks as a compilation does that automate going from one gapless album to the next?

    I created a gapless album by joining the tracks on a disc in a multiple disc audiobook.  I want my classic Ipod to turn off after it finishes an album but it continues on to the next disc (album) in the audiobook automatically.  When it finishes the multiple discs contained in the compilation of one album it continues to the next audiobook.  This is great when listening to the audiobook in a car while driving, but not when I use the Ipod to put me to sleep at night.  Why does it do this? 

    Did you put the library on the external drive, or just the media folder. See this migrate iTunes library post for the way this ought to be done and recovery tips for when it is no longer possible.
    tt2

  • How do I move from one GUI screen to the next using J2SE?

    Hi, How do I move to another screen (JFrame) from an existing screen (JFrame) using a JButton as the trigger?

    There are hundreds of ways to do this, this one is
    just a rather simple aproach
    public void show(SomeType myParameter){
          ... do some work for preparing the Dialog for diplaying ...
        this.setVisible(true);and use this instead of the call to
    frame2.setVisible(true)Spieler

  • Passing table values from one webdypro screen to the next in BPM flow

    Hi,
    I have a BPM scenario where in User 1 will be entering data on a java webdynpro view in the form of a table. The user 1 should be able to edit contents of the table.
    These set of values in the table from User 1 needs to be passed to User 2 through BPM. The User 2 should be able to read the values edited by User 1 in the table.
    Please could you suggest how we could map the table attribute?
    With respect to Context Elements, I have a Node created for the table. But, the data doesnot seem to pass from User 1 to User 2.
    Any suggestions on this would be extemely helpful.
    Thank You.

    Hi,
    Please follow the below mentioned steps:
    Create a Human Activity containing the task(WebDynpro Task) to edit the table values.
    Create a data context of type (Context of the table node used in the Webdynpro task).
    Map the output of the human activity to the input of the data context.
    Create another human activity that contains the task to read the values of task1
    Assign this task to User 2
    Map the output of data context with the input of the second human activity.
    Regards,
    Gayathri

  • How do I switch from "one Mozilla window to the next?" I want to go back and forth between multiple windows by using a keyboard shortcut. Please help.

    Does anyone know the shortcut for this action?

    Hi,
    You can try '''Alt''' + '''Tab'''.
    [https://support.mozilla.org/en-US/kb/Keyboard+shortcuts?s=keyboard+shortcuts Keyboard Shortcuts]

  • Moving services from one server to another

    Hi all,
    I moved Access Database Services and Excel Services from one app server to another app server by starting those services on the new server and stopping them on the old one. However, in the app logs and ULS, SharePoint errors out cuz it still tries to make
    the calls to the old server. Why is this? I did the iisreset on the old server, but it made no difference. What am I missing?

    Hi ,
    According to your description, my understanding is that you got an error when you moved Access Services and Excel Services from one server to another server.
    As Trevor said, please do an IISRESET on the new server, and compare the result.
    Please restart the new server running Access Services and Excel Services applications. If restarting the server does not correct the problem, confirm that the hardware of the server is functioning correctly, or reinstall Access Services Application
    and re-add the server to the server farm.
    Here are some similar posts for you to take a look at:
    http://technet.microsoft.com/en-us/library/ee513104(v=office.14).aspx
    http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010setup.aspx?ID=dc48676c-43f6-45f9-ab46-2ed6515c9660
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

Maybe you are looking for