Cant access sim after downgrade to gb....

hi
i downgraded to gb 4.0.2.a.0.42.according to Nabeel's tutorial..i had to use an older version of flashtool because the new one wont shown me the components of the ftf.....now my phone tells me there's no sim card/service...i cant even connect via wifi....any ideas?
Thanks

Reinstall your software using PC Companion ?
Was your phone locked to an operator ?
and if you want to ask questions to me then post in my guides only. I will respond in them quicker
Thanks
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Similar Messages

  • Cant access ECP after the installation of cu7

    Hello guys,
    I am confronting a weird issue, i installed exchange 2013 cu7 a week ago and since then i am not able anymore to login to ECP as administrator. In fact i can login but the server is forwarding the request to OWA (Account Options of administrator).
    I figured out how to Enable/Disable the admin with the following exchange powershell command:
     Set-ECPVirtualDirectory -Identity "hostname exchange\ecp (default web site)" -AdminEnabled $True
    Is there an other way of doing that? Something like that the admin will be enabled on internal LAN but not from the internet...?

    Hi,
    From your description, I would like to verify the following things for troubleshooting:
    1. Check if users can logon to OWA successfully.
    2. Make sure that the ECP and OWA authentication is the same with the authentication before installing Exchange 2013 CU7.
    3. Create a new user and add this user as a member of the Organization Management role group, then check if you can logon EAC using this user account.
    Here is an article for your reference.
    How To Access Exchange Admin Center in Exchange Server 2013
    http://social.technet.microsoft.com/wiki/contents/articles/18024.how-to-access-exchange-admin-center-in-exchange-server-2013.aspx
    If the issue persists, please take your time to post the error information when you logon EAC for my further research.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Cant access VPN after IOS upgrade

    I have a 871w router and I upgraded the IOS to 12.4.15.xy5. Now when I connect to VPN it site at verifying username. It worked prior. I have SDM installed

    Hi
    I'm guessing your using PPTP.
    If you have access to this box (via telnet/ssh/console) check that the configuration is ok.
    If you are using radius / tacacs+ for authentication, check the servers are still reachable and if it's local auth, check / reset your username and password.

  • Even after i reset my iTunes password i still cant access my account?

    Even after resetting my itunes password I still cant access my account

    Well, i haven't accessed my itunes account for more than 7 months because my old computer was dropped and it broke. Now i finally got a new laptop. Then when i downloaded itunes and signed in to my account, i tried listening to music but a notification popped up and said my account was disabled. I changed my password but itunes still wont let me play music.

  • I bought  new iphone 5s locked  after i unlocked my iphone5s . when I switch on my phone it says enter your apple id but i forgot my icloud username. I cant access anything in my iphone. please help me? what shall i do .

    I bought  new iphone 5s locked  after i unlocked my iphone5s . when I switch on my phone it says enter your apple id but i forgot my icloud username. I cant access anything in my iphone. please help me? what shall i do .

    kitan47 wrote:
    I bought  new iphone 5s locked  after i unlocked my iphone5s
    Was it Officially Unlocked by the Carrier it was locked to...?
    If so... who is the carrier..?

  • Help.after updating my os5, my app store icon is gone and i cant access my store!!!what is going on, Help.after updating my os5, my app store icon is gone and i cant access my store!!!what is going on

    Help.after updating my os5, my app store icon is gone and i cant access my store!!!what is going on, Help.after updating my os5, my app store icon is gone and i cant access my store!!!what is going on

    You're not talking to a team of Apple employees poised to jump on your question.  We're all just users here, and we might be doing something else...
    You cannot delete the App store App. It is somewhere on your Home screens, or you have dragged it into a folder. Any folder. If all else fails Settings > General > Reset > Reset Home Screen Layout.

  • I brought a iphone 5c from ebay, when i recieve the i item its loked with i cloud, and also had a tmobile sim card in the slot...now i cant access the phone because its locked with i cloud,i do not have the owner details to contrac him,,

    i brought a iphone 5c from ebay, when i recieve the i item its loked with i cloud, and also had a tmobile sim card in the slot...now i cant access the phone because its locked with i cloud,i do not have the owner details to contrac him....but i called to tmobile, they said this phone is not a stolen one,,thet told me to contrac apple.....is apple can unlock the icloud?

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • Ive backed up my phone and restored it after updating the software and now a lot of my apps have waiting next to them and i cant access them from the interface

    Ive backed up my phone and restored it after updating the software and now a lot of my apps are greyed out and i cant access them via the phone interface
    I can only access them via the App store

    I did plug it into itunes and then backed it up to the cloud (im actually wondering if thats my problem)
    then restored it from the cloud. 
    Maybe I should restore it from the computer (when its plugged into itunes?)
    thanks sberman

  • GTX590 Cant access NVIDIA control panel Black screen after 10 mins

    Hi,
    I recently purchased an MSI GTX590 and encountered this problem " Cant access NVIDIA control panel Black screen after 10 mins". I am running Windows7 Ultimate SP1.
    I did have an xfire setup of 2xHD6970's, I uninstalled all the old drivers then used driver sweeper to clean out any remaining folders, also uninstalling them from device manager.
    Next I installed the latest version of drivers from the NVIDIA site only to find that I am stuck in safe mode resolutions for my screen I cant access the NVIDIA control panel as it is saying " You are not currently using a display attached to an Nvidia GPU ". In device manager it states that
    "Windows has stopped this device because it has reported problems. (Code 43) ".
    I have now uninstalled and reinstalled about 6 different versions of drivers from NVIDIA including the latest BETA drivers which all have the same issue??????
    I have also gone to the MSI site and downloaded their latest recommended drivers for the GTX590 NVIDIA Graphics Drivers Version 267.91 which are the only ones that seem to work as in it fixes the screen to the proper resolution and lets me into the NVIDIA control panel yet after about 10-15 mins the screen will go black or the computer will just freeze. Rebooting causes the same issue after 10-15mins    
    I have noticed a few others out there experiencing the same problem but no fixes as of yet any ideas??

    Thankyou for the reply,
    Tested the card in another working machine capable of running and its fine I am sure the PSU I have is more than capable of running this card I ran 2 6970's in xfire on the same PSU and motherboard with no problems.
    I am running it on an 40"BRAVIA LCD and am using the DVI to HDMI converter that came with the GTX590 and I have also tried it with an DVI to HDMI cable also.
    The system is stable under the latest NVIDIA drivers but the display drivers aren't recognized under device manager and the screen resolution is still stuck in the safe mode size, they are shown up as having the same "error 43" and I still can't get access to the NVIDIA control panel.
     I strongly believe this is a driver issue or an issue relating to software within windows. To give you a rundown on several things that I have tried to isolate or fix the issue with is in a list here:
    1. Installed every different version of drivers on an fresh install of windows7 including the latest Beta drivers
    2. Tried to run the GTX590 on another machine and it runs using windows7
    3. Run different graphics card setup using the same PSU RAM and mb on windows7 no problems.
    4. Run the gfx card on only 1 gpu no change.
    5. Last step I will take is to install Windows7 without the SP1 as I have read elsewhere that similar problems have been fixed by doing this if that don't work might just sell my soul to the devil n see if he can fix it lol.  

  • Cant access my #2 display screen right after i installed verson 10

    For some reason i cant access my #2  display screen right after i installed verson 10.the cable was checked out ok....please advise.

    , Hello and thanks for posting on the HP support forums.  First thing you may want to try is the Windows Update Troubleshooter. If that fails then what you will want to try is rolling back the operating system to the previous operating system until drivers are released for Windows 10 on the HP support site for your system. Thanks again for the post and have a great day.

  • After upgrading my WRT160N firmware, I cant access the router at all.!!

    After upgrading I cant access the router at all.!!
    I just upgraded the firmware to WRT160Nv2_v2.0.03.007_US_code.bin from a download.
    I had the CD ver 2.00.2 build 8 on it originally. I upgraded because the router would have the DNS problems everyone is talking about both wireless and wired. I tried the all zeros 0.0.0.0 and that did not work.
    Now that I upgraded, I cant get into the box at all. I dont get the log in screen. I have reset multiple times and power cycled through. The ip I am trying to get back in is 192.168.1.1
    How can I get this box to respond?

    Are you able to ping 192.168.1.1 from the wired computer...?
    Unplug the modem from the router,hard-reset the router for 1 minute,power cycle the router...Make sure that the computer is connected to the router on the Ethernet port...Now,Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
    IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1......If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security software on the computer...
    If you get 4 replies then,go to start>>>run>>>and type "//192.168.1.1" and hit enter..If you are able to open the linksys setup page then,connect the modem to the router on the internet port and configure the router as per the ISP settings.

  • I cant access the root share of a windows server after upgrading to mountain lion

    Hi Guys,
    Since upgrading to mountain lion i cant access the shared drives on our windows server. For example in a windows machine if i go to run the type \\server\ i get all the visible shares available. in my previous version i was able to do the same (obviously i would authenticate with my AD account). now when i try to access those same shares i get the message below:
    "The operation cant be completed becuase the original item for "/" cant be found"
    I can however connect to the shares directly for example if i connect to server path \\server\data it works ok.
    I have verified my account details and they are ok - i have also disconnected and reconnected the connection.
    This was working fine before the upgrade. can anyone help??

    well iv just managed to get to 35 gig free (just deleting iphone backups) and im now able to get past the next screen on bootcamp.
    unfortunatly its only allowing me to create a new partition not delete the current.
    this is leading me to think the old ones master partition has become damaged and the hard drive dosent know it exists any more.
    if this is the case (please tell me im wrong though) what options do i have as i dont want to / have the money to buy another hard drive to back everything up to it with.
    thanks again
    gareth

  • I cant access ibooks too after going ios 8 on ipad

    lot and lot of problem are coming.
    first mutli tasking is slower
    then some freezes pages and switching during apps.
    can access apps store,
    i cloud cant be upgrade manually.
    and now i cant access ibooks too. it is totally blank like apps store.
    what can i do to access ibooks and app store again. they are blank. but i have no trouble in update the existing apps i have .

    Sorry, but no.
    Try a reset ..
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You may have to re enter your Wi-Fi password.
    If nothing above helped, restart your router then try email.

  • After Installing Oracle Virtual Box and changing the network adapter to bridged mode cant access my server

    Hi ,
    I have installed Oracle Virtual box on windows server 2008 r2 hosted on 1und1.de.
    Till installtion and setting up untun on virtualbox it was fine, but once i changed the adapater to bridged mode. I immediatly lost connectivity with my server and now cant access.
    It is now 2 days i cant access my server and neither ping it, also the website hosted on it is also down.
    The 1und1 has following 2 options
    1) using putty i can connect to server command prompt using administrator but cant run any gui application
    2) Server Rescue mode: where i get special environment to start, stop services, access registry and command prompt.
    Till now i have tried lot of setting to enable network connectivity but not able to success
    This is the result of Ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : s15453760
       Primary Dns Suffix  . . . . . . . :
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter VirtualBox Host-Only Network:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter
       Physical Address. . . . . . . . . : 08-00-27-00-04-FD
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::5d5c:5bbc:c61:e9b1%16(Preferred)
       Autoconfiguration IPv4 Address. . : 169.254.233.177(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.0.0
       Default Gateway . . . . . . . . . :
       DHCPv6 IAID . . . . . . . . . . . : 352845863
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-B9-51-EA-00-19-99-A5-E7-BE
       DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                           fec0:0:0:ffff::2%1
                                           fec0:0:0:ffff::3%1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{BBF9AA14-45EA-460C-8F23-E106D890D878}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter 6TO4 Adapter:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft 6to4 Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 12:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    How can i restore my connection.
    Thanks

    Hi,
    According to the result of "ipconfig /all", the physical adapter dosen't appear.
    Please check if the physical network adapter works properly. We can verify this in Device Manager.
    To open Device Manager by using the Windows interface
    Click Start, and then click Control Panel.
    Click Hardware and Sound.
    Click Device Manager.
    If the network adapter is working properly, please make sure that the Internet Protocol Version 4(TCP/IPv4) has been checked in the properties of the physical network adapter.
    If issue persists, please try to uninstall the Oracle Virtual box.
    Best Regards.
    Steven Lee
    TechNet Community Support

  • HT4864 cant access my email after logging in

    when i sign in into my account [email protected], it doesn't open the email so i cant access my email, please advice me on what to do

    new host extended box .... login icloud unique once for the account đó.retore twice before the Change the account PN .... time of this retore an account does not hoạt động ....

Maybe you are looking for