Cant access to BIOS aftre HDD/SSD password!

Hello,
Today I set a HDD/SSD password to my Tecra A-11 (updated BIOS) and I am verry happy with that pas,but I cant enter to the BIOS after I enter my HDD/SSD passwor - I press F2,but the screen just go dark for a second or two and the system acts like just being restarted - starting Windows 7 Ultimate.
Please advice what have to be done so I can enter my BIOS again.
Thanks in advance

If it thinks it has a BIOS or HDD password, there's no way to remove that without servicing. It sounds like it likely got damaged in the drop.
- Peter

Similar Messages

  • I have recently changed my Apple ID password, but i now cant access my icloud with the new password, i thought the 2 were linked?

    i have recently changed my Apple ID password, but i now cant access my icloud with the new password, i thought the 2 were linked?

    Hi helenbeach,
    If you've recently made changes to your Apple ID, you may need to update or log out/log back in to some of the related services for those changes to take effect. You may find the following article helpful:
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796
    Regards,
    - Brenden

  • Hi..i am trying to login i message but i cant access ,it thing i forgot my password number, please i need help,how i can reset new password number. please i need help.

    hi..i am trying to login i message but i cant access ,it thing i forgot my password number, please i need help,how i can reset new password number. please i need help.

    Go here.
    Good luck,
    Clinton

  • WRT54GC problems, cant access routher bios

    the other day i was trying to change some of the options on the router page and my comp froze so had to restart, once i got back to the home screen i tried to log onto my router again and it keeps saying server timed out and unable to connect to the router.  i did a ipconfig/all and it says that my default gateway has changed from 192.168.1.1 to 134.88.186.1  i try to type that in and it still wont let me to the log in screen for my router.  but the wierd thing is that i still get internet through the router, but it wont let me into the screen.  i tried to lower the secrutiy on in the internet options and i have no proxy's. ANY SUGGESTIONS THAT I CAN TRY?

    Who is your Internet Service Provider?
    The IP Address 134.88.186.1 you are getting is under wireless network connection or LAN ?
    Are you trying to do the settings from Wireless Computer? Use the wired computer to do the settings.
    If you are getting the IP Address 134.88.186.1 then, you might connected to some other network.Connect the computer to the router on Lan Port..Now check the IP address and default gateway and try to access the setup page. 

  • LENOVO G50-30 stuck at lenovo logo and cant even enter bios

    Hello
    I yust got my lenovo G50-30 and wanted to install win 7 on it. after the first BsoD I went to bios and changed the AHCI to legacy mode. Got the same BsoD.  After that I changed the Os mode from win 8 to win 7 ... loaded the factory default settings and putted from AHCI to legacy mode again.
    After that the laptop turns on, but it stucks at lenovo logo. I cant access the bios anymore to make any other changes. If I insert a win7 instalation disc, it start to spin but with no sucess. also cant acess the boot options anymore.
    Any help greatly apreciated

    I suggest removing battery and AC, holding the power button for more than 15 seconds to reset the BIOS back to default settings then see if the issue remains.
    Make sure to post the results.
    Good luck.

  • Even after i reset my iTunes password i still cant access my account?

    Even after resetting my itunes password I still cant access my account

    Well, i haven't accessed my itunes account for more than 7 months because my old computer was dropped and it broke. Now i finally got a new laptop. Then when i downloaded itunes and signed in to my account, i tried listening to music but a notification popped up and said my account was disabled. I changed my password but itunes still wont let me play music.

  • Cant access iCloud mail, and it won't remember my password on iPhone

    Hello,
    I cant access icloud through my web browser, it keeps saying:
    ORIGIN
    server
    TYPE
    error
    BUILDNUMBER
    1FCS29.34215
    TIME
    Tue Nov 15 2011 11:23:32 GMT+0000 (GMT)        (1321356212070)
    HOST
    www.icloud.com
    USERAGENT
    Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_2) AppleWebKit/535.8 (KHTML, like Gecko) Chrome/17.0.938.0 Safari/535.8
    PRSID
    75076771
    RECENTLOGMESSAGES
    Tue, 15 Nov 2011 11:23:27 GMT:  DEBUG: MAIL in main()
    Tue, 15 Nov 2011 11:23:27 GMT:  DEBUG: -->  Request 1:   POST to https://p06-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 15 Nov 2011 11:23:27 GMT:  DEBUG: Request out: /wm/preference-list-->1321356207099/1
              params: {"locale":"en-us","timeZone":"Europe/London"}
    Tue, 15 Nov 2011 11:23:27 GMT:  DEBUG: SC.Object:sc1074:dispatch('load content')
    Tue, 15 Nov 2011 11:23:27 GMT:  DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
    Tue, 15 Nov 2011 11:23:27 GMT:  DEBUG: SC.Module: Attempting to load 'addresses'
    Tue, 15 Nov 2011 11:23:27 GMT:  DEBUG: SC.Module: Module 'addresses' is not loaded, loading now.
    Tue, 15 Nov 2011 11:23:27 GMT:  DEBUG: SC.Module: Loading JavaScript file in 'addresses' -> '/applications/mail/frameworks/addresses/en-us/1FCS29/javascript.js'
    Tue, 15 Nov 2011 11:23:27 GMT:  DEBUG: SC.Object:sc3102:initStatechart()
    Tue, 15 Nov 2011 11:23:27 GMT:  DEBUG: -> entering "9 Address List Not Visible"
    Tue, 15 Nov 2011 11:23:28 GMT:  DEBUG: -->  Request 2:   GET to https://p06-contactsws.icloud.com:443/co/addressbook/?order=first,last&locale=en _US,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 15 Nov 2011 11:23:28 GMT:  DEBUG: SC.Module: Module 'addresses' finished loading.
    Tue, 15 Nov 2011 11:23:28 GMT:  DEBUG: SC.Module: Evaluating and invoking callbacks for 'addresses'.
    Tue, 15 Nov 2011 11:23:28 GMT:  DEBUG: SC.Module: Module 'addresses' has completed loading, invoking callbacks.
    Tue, 15 Nov 2011 11:23:28 GMT:  DEBUG: APPLICATION: Received applicationWillBecomeActive
    Tue, 15 Nov 2011 11:23:28 GMT:  DEBUG: <--  Response 2:  200  (460ms, suspended for 340ms),  headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8  body: (omitted)
    Tue, 15 Nov 2011 11:23:28 GMT:  WARN:  APPLICATION: Received applicationDidBecomeActive
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: willReceive: Status:500, Request:/wm/preference
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:1
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: -->  Request 3:   POST to https://p06-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: Request out: /wm/preference-list-->1321356207099/1
              params: {"locale":"en-us","timeZone":"Europe/London"}
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: willReceive: Status:0, Request:/wm/preference
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: Got HTTP 0 : Redirecting request: /wm/preference : Redirect count:2
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: -->  Request 4:   POST to https://p06-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: Request out: /wm/preference-list-->1321356207099/1
              params: {"locale":"en-us","timeZone":"Europe/London"}
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: willReceive: Status:0, Request:/wm/preference
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: Got HTTP 0 : Redirecting request: /wm/preference : Redirect count:3
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: -->  Request 5:   POST to https://p06-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: Request out: /wm/preference-list-->1321356207099/1
              params: {"locale":"en-us","timeZone":"Europe/London"}
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: willReceive: Status:0, Request:/wm/preference
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: Got HTTP 0 : Redirecting request: /wm/preference : Redirect count:4
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: -->  Request 6:   POST to https://p06-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: Request out: /wm/preference-list-->1321356207099/1
              params: {"locale":"en-us","timeZone":"Europe/London"}
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: willReceive: Status:0, Request:/wm/preference
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: Got HTTP 0 : Redirecting request: /wm/preference : Redirect count:5
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: -->  Request 7:   POST to https://p06-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: Request out: /wm/preference-list-->1321356207099/1
              params: {"locale":"en-us","timeZone":"Europe/London"}
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: willReceive: Status:0, Request:/wm/preference
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: <--  Response 7:  0  (4ms),  headers:   body: (empty)
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: Request in: /wm/preference-list-->1321356207099/1,0,3ms
    Tue, 15 Nov 2011 11:23:30 GMT:  DEBUG: ServerPreferencesDataSource.retrieveResponse error = -1/0/guid=serverPrefsGuid
    Tue, 15 Nov 2011 11:23:30 GMT:  ERROR: CoreMail handled error 13002 before exiting Mail
    Also, iCloud keeps forgetting my password on iphone and makes it unable to collect email...
    Any thoughts?

    Yes, fortunately it suddenly started working again. I'm not really sure what (if anything) I did. In any case I used the password reset function on http://iforgot.apple.com/ a few times, maybe that's what fixed the problem in my case.

  • Cant access BIOS on Satellite L40T-A202

    Hi!
    Months ago i updated my Toshiba L40T-A202 laptop's bios. After the restart i cant seem to access the bios. I fixed it by jumping the jcmos in mobo. Now the problem occurrd again and i cant seem to fix it with the same fix i did.
    Can someone help me? This latop was bought outside the country and i dont want to spend much cash and send it to repair shops.
    Please help me on this.

    Yes. I know i already voided the warranty by doing that. But jumping the cmos is the only qay to do that at that point. Besides toshiba service station here is very far and as I've said I don't have the means of flying there. Anyway to answer your questions sir: Yes, it was successfully updated. I can see the toshiba screen at start-up but it is stuck there, hence I can't log into windows.
    The stuck in toshiba screen already happened before, but fixed by jumping the cmos. But now the problem appeared again and jumping the cmos don't seem to work anymore.
    Thanks for the response sir.
    Message was edited by: mbermundo

  • Somebody can help me please. I can't access my count in gmail. I restart because the told me that my name or password is wrong. I can't set up my gmail count again. So is it necessary configure the smtp? If yes, I cant access this option.

    Somebody can help me please. I can't access my count in gmail. I restart because the told me that my name or password is wrong. I can't set up my gmail count again. So is it necessary configure the smtp? If yes, I cant access this option. The message that I have is: the user name or password for imap.gmail.com is incorrect.

    Ok, I've had thie issue with various email address on and off for aout a year now. I finally found a soulution:
    Login to the Google account giving you problems;
    Go to: https://accounts.google.com/DisplayUnlockCaptcha
    Hit "Continue".
    Go to Apple Mail and hit "Get Mail" for that account.
    Repeat for each account continually asking for password.

  • I cant access my email account. A message saying the username or password are incorrect. This is trying to access email throug Iphone, Ipad or any PC.

    I cant access my email account. A message saying the username or password are incorrect.
    This is trying to access email through Iphone, Ipad or PC.

    What does this have to do with Apple or any iDevice?
    Contact whomever the email provider is and correct the login credential issue.

  • TS3991 I can't sign-in to my iCould account from my iPhone. The account is linked to an old email address that is closed and i cant access anymore. So that means that I can't reset the password!

    I can't sign-in to my iCould account from my iPhone. The account is linked to an old email address that is closed and i cant access anymore. So that means that I can't reset the password! However, I can access my iCould account from the website.
    I need help !

    Welcome to the Apple community.
    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • Bios trouble .. cant access the setup P-45 neo-f(outside box) / ms-7519(sandra)

    P-45 neo-f(outside box) / ms-7519(sandra)
    BIOS : 64-0100-009999-00101111-081208-Eaglelake
    version: 1.0
    when  i press [DEL] to enter the bios setup .. i get a blank screen .. and nothing more happends.
    and sometimes the screen tells me "No signal input"
    .. I have never been able to on this computer.
    I never tried to update or flash the bios .
    It would be a very slow  process to get it fixed by the reseller ..probably a few month..
     Maybe anyone here knows whats wrong?
    and what i can do to fix it 
    The computer boots and operates normally ..  but i want to disable the built in soundcard, to replace it with a better one.
    I also want to replace the cpu with something faster.. its a 2.33ghz quadcore now .(whats the fastest cpu for this mainboard ? where can i find a list)
    If i flash or reset the bios? will it autodetect the hardware, even if i still cant access the setup screen? or just make  things worse
    .. now it works .. its a miracle .. i figured out u u have to press del at the exact right moment at boot  .. if u press it too soon .. = black screen .. too late = no signal input ..  wierd design
     but i still dont find this board at the msi site .. only p45 neo .. without F ..  and i cant use the live update becuse of 64bit os

    Quote
    only p45 neo .. without F
    P45 Neo-F and P45 Neo are identical.
    Quote
    whats the fastest cpu for this mainboard ? where can i find a list)
    On the MSI Product Site for your Board:
    http://global.msi.eu/index.php?func=prodcpu2&prod_no=1482&maincat_no=1&orderby=cpu_speed%20ASC#menu
    Quote
    its a 2.33ghz quadcore now
    Must be a Q8200 then.  But which one exactly?  There are three different revisions.  In any case, if your really have BIOS v1.0, you need a BIOS Update to ensure proper CPU Support.
    Quote
    P-45 neo-f(outside box) / ms-7519(sandra)
    BIOS : 64-0100-009999-00101111-081208-Eaglelake
    version: 1.0
    Do not trust Sandra for board and BIOS Information.  Please check your current BIOS Version in the BIOS Setup under Standard CMOS Features -> System Information.
    Before posting another reply here, please read this:
    >>Posting Guide<<

  • TS1702 forgotten password on ipod touch cant access

    Hey can anyone help - ipod touch access password has been changed and now can't access it - displays Ipod disabled connect to itunes - and still cant' access what do I do?\

    This is asked and answered quite often.  You can do a forum search ( right side of this page) and find the answer many time over, such as:
    https://discussions.apple.com/thread/2790018

  • Cant access BIOS MSI Z87 G43

    Hi Everyone,
    I have had my pc for a few months now and i have been able to access my bios with no issues at all.
    However, for a few days now my computer has skipped past the option to enter bios and just starts windows almost immediately. Everything ive tried to access it (ie press del or F8 etc when i power on) has not let me in. At start up the code 'A2' flashes up for a split second on a blank screen then windows starts up.
    Does anyone have any ideas what I can do?
    Thanks

    Quote from: jch1321 on 05-July-14, 05:26:15
    Yes I had fast boot enabled. I cleared CMOS and that has solved the problem.
    Thank you

  • T43 motherboar​d damage cant access hard drive

    Hello, I wonder if anyone to there could advise me.
    I have a T43 with finger print reader, I was shoved on the train and dropped my bag
    which resulted in it hitting the floor and the plug punched through the back into the
    motherboard. The laptop was in standby at the time.
    I have brought a USB 2.5 hard drive connector to try and recover my data but cannot
    access it.
    Is the hard drive encrypted if the finger print reader is used.
    Can the hard drive be crashed so badly by the mother board being damaged that
    you cant access it anyway?
    Many Thanks
    Dave

    davidadams, welcome to the forum,
    ouch! sorry to hear about your bad luck.
    The fingerprint doesn't encrypt the hard drive, Client Security does if you configured it to do so.
    If you had the finger print configured with a hard drive password set in bios you will not be able to access the hard drive in an usb enclosure. As long as you know the password it is possible to remove the password in another ThinkPad, preferably another T43.
    As your T43 was in standby, it is possible that the drop also damaged the hard drive. This would have been less likely if it had been in hibernation mode or turned off as the heads would have been properly parked.
    There are ways to recover files from a damaged hard drive, some less costly than others; it depends on how badly it is damaged, if it is damaged.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

Maybe you are looking for